ppc4xx: Big header cleanup, mostly PPC440 related
This patch starts a bit PPC4xx header cleanup. First patch mostly
touches PPC440 files. A later patch will touch the PPC405 files as well.
This cleanup is done by creating header files for all SoC versions and
moving the SoC specific defines into these special headers. This way the
common header ppc405.h and ppc440.h can be cleaned up finally.
Signed-off-by: Stefan Roese <sr@denx.de>
diff --git a/board/amcc/bamboo/bamboo.c b/board/amcc/bamboo/bamboo.c
index 41957c9..d4205e0 100644
--- a/board/amcc/bamboo/bamboo.c
+++ b/board/amcc/bamboo/bamboo.c
@@ -554,7 +554,7 @@
|
+-------------------------------------------------------------------------*/
/* Read Pin Strap Register in PPC440EP */
- mfsdr(sdr_pstrp0, sdr0_pstrp0);
+ mfsdr(SDR0_PINSTP, sdr0_pstrp0);
bootstrap_settings = sdr0_pstrp0 & SDR0_PSTRP0_BOOTSTRAP_MASK;
/*-------------------------------------------------------------------------+
diff --git a/board/amcc/bamboo/bamboo.h b/board/amcc/bamboo/bamboo.h
index 4474862..f2b78a9 100644
--- a/board/amcc/bamboo/bamboo.h
+++ b/board/amcc/bamboo/bamboo.h
@@ -110,17 +110,6 @@
/*----------------------------------------------------------------------------+
| SDR Configuration registers
+----------------------------------------------------------------------------*/
-/* Serial Device Strap Reg 0 */
-#define SDR0_SDSTP0 0x0020
-/* Serial Device Strap Reg 1 */
-#define SDR0_SDSTP1 0x0021
-/* Serial Device Strap Reg 2 */
-#define SDR0_SDSTP2 SDR0_STRP2
-/* Serial Device Strap Reg 3 */
-#define SDR0_SDSTP3 SDR0_STRP3
-
-#define sdr_pstrp0 0x0040
-
#define SDR0_SDSTP1_EBC_ROM_BS_MASK 0x00006000 /* EBC Boot Size Mask */
#define SDR0_SDSTP1_EBC_ROM_BS_32BIT 0x00004000 /* EBC 32 bits */
#define SDR0_SDSTP1_EBC_ROM_BS_16BIT 0x00002000 /* EBC 16 Bits */
diff --git a/board/amcc/bamboo/flash.c b/board/amcc/bamboo/flash.c
index 406342f..07d185f 100644
--- a/board/amcc/bamboo/flash.c
+++ b/board/amcc/bamboo/flash.c
@@ -86,7 +86,7 @@
unsigned long ebc_boot_size;
unsigned long boot_selection;
- mfsdr(sdr_pstrp0, val);
+ mfsdr(SDR0_PINSTP, val);
index = (val & SDR0_PSTRP0_BOOTSTRAP_MASK) >> 29;
if ((index == 5) || (index == 7)) {
diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c
index 4338e6b..c523bca 100644
--- a/board/amcc/sequoia/sequoia.c
+++ b/board/amcc/sequoia/sequoia.c
@@ -321,8 +321,8 @@
* This fix will make the MAL burst disabling patch for the Linux
* EMAC driver obsolete.
*/
- reg = mfdcr(PLB4_ACR) & ~PLB4_ACR_WRP;
- mtdcr(PLB4_ACR, reg);
+ reg = mfdcr(PLB4A0_ACR) & ~PLB4Ax_ACR_WRP_MASK;
+ mtdcr(PLB4A0_ACR, reg);
return 0;
}
diff --git a/board/esd/du440/du440.c b/board/esd/du440/du440.c
index fccfaee..426321e 100644
--- a/board/esd/du440/du440.c
+++ b/board/esd/du440/du440.c
@@ -265,8 +265,8 @@
* This fix will make the MAL burst disabling patch for the Linux
* EMAC driver obsolete.
*/
- reg = mfdcr(PLB4_ACR) & ~PLB4_ACR_WRP;
- mtdcr(PLB4_ACR, reg);
+ reg = mfdcr(PLB4A0_ACR) & ~PLB4Ax_ACR_WRP_MASK;
+ mtdcr(PLB4A0_ACR, reg);
/*
* release IO-RST#
diff --git a/board/esd/pci405/pci405.c b/board/esd/pci405/pci405.c
index dd97c7a..4018a7d 100644
--- a/board/esd/pci405/pci405.c
+++ b/board/esd/pci405/pci405.c
@@ -281,7 +281,6 @@
#define PCI0_BRDGOPT1 0x4a
pci_write_config_word(PCIDEVID_405GP, PCI0_BRDGOPT1, 0x3f20);
-#define PLB0_ACR 0x87
/*
* Enable fairness and high bus utilization
*/
diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c
index c907b85..8238c33 100644
--- a/board/esd/pmc440/pmc440.c
+++ b/board/esd/pmc440/pmc440.c
@@ -426,8 +426,8 @@
* This fix will make the MAL burst disabling patch for the Linux
* EMAC driver obsolete.
*/
- reg = mfdcr(PLB4_ACR) & ~PLB4_ACR_WRP;
- mtdcr(PLB4_ACR, reg);
+ reg = mfdcr(PLB4A0_ACR) & ~PLB4Ax_ACR_WRP_MASK;
+ mtdcr(PLB4A0_ACR, reg);
#ifdef CONFIG_FPGA
pmc440_init_fpga();
diff --git a/board/korat/korat.c b/board/korat/korat.c
index afa36d6..4f0513a 100644
--- a/board/korat/korat.c
+++ b/board/korat/korat.c
@@ -553,8 +553,8 @@
* This fix will make the MAL burst disabling patch for the Linux
* EMAC driver obsolete.
*/
- reg = mfdcr(PLB4_ACR) & ~PLB4_ACR_WRP;
- mtdcr(PLB4_ACR, reg);
+ reg = mfdcr(PLB4A0_ACR) & ~PLB4Ax_ACR_WRP_MASK;
+ mtdcr(PLB4A0_ACR, reg);
set_serial_number();
set_mac_addresses();
diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c
index 0c6f4e5..9622b70 100644
--- a/board/lwmon5/lwmon5.c
+++ b/board/lwmon5/lwmon5.c
@@ -38,8 +38,8 @@
u32 reg;
/* PLB Write pipelining disabled. Denali Core workaround */
- mtdcr(PLB0_ACR, 0xDE000000);
- mtdcr(PLB1_ACR, 0xDE000000);
+ mtdcr(PLB4A0_ACR, 0xDE000000);
+ mtdcr(PLB4A1_ACR, 0xDE000000);
/*--------------------------------------------------------------------
* Setup the interrupt controller polarities, triggers, etc.
@@ -249,8 +249,8 @@
* This fix will make the MAL burst disabling patch for the Linux
* EMAC driver obsolete.
*/
- reg = mfdcr(PLB4_ACR) & ~PLB4_ACR_WRP;
- mtdcr(PLB4_ACR, reg);
+ reg = mfdcr(PLB4A0_ACR) & ~PLB4Ax_ACR_WRP_MASK;
+ mtdcr(PLB4A0_ACR, reg);
/*
* Init matrix keyboard
diff --git a/board/netstal/hcu5/hcu5.c b/board/netstal/hcu5/hcu5.c
index b15f99e..f94d05b 100644
--- a/board/netstal/hcu5/hcu5.c
+++ b/board/netstal/hcu5/hcu5.c
@@ -327,7 +327,7 @@
u32 reg;
mfsdr(SDR0_PCI0, reg);
- return (reg & SDR0_XCR_PAE_MASK);
+ return (reg & SDR0_PCI0_PAE_MASK);
}
/*
@@ -352,28 +352,28 @@
* Set priority for all PLB3 devices to 0.
* Set PLB3 arbiter to fair mode.
*/
- mfsdr(SD0_AMP1, addr);
- mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00);
- addr = mfdcr(PLB3_ACR);
- mtdcr(PLB3_ACR, addr | 0x80000000); /* Sequoia */
+ mfsdr(SDR0_AMP1, addr);
+ mtsdr(SDR0_AMP1, (addr & 0x000000FF) | 0x0000FF00);
+ addr = mfdcr(PLB3A0_ACR);
+ mtdcr(PLB3A0_ACR, addr | 0x80000000); /* Sequoia */
/*
* Set priority for all PLB4 devices to 0.
*/
- mfsdr(SD0_AMP0, addr);
- mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00);
- addr = mfdcr(PLB4_ACR) | 0xa0000000; /* Was 0x8---- */
- mtdcr(PLB4_ACR, addr); /* Sequoia */
+ mfsdr(SDR0_AMP0, addr);
+ mtsdr(SDR0_AMP0, (addr & 0x000000FF) | 0x0000FF00);
+ addr = mfdcr(PLB4A0_ACR) | 0xa0000000; /* Was 0x8---- */
+ mtdcr(PLB4A0_ACR, addr); /* Sequoia */
/*
* As of errata version 0.4, CHIP_8: Incorrect Write to DDR SDRAM.
* Workaround: Disable write pipelining to DDR SDRAM by setting
- * PLB0_ACR[WRP] = 0.
+ * PLB4A0_ACR[WRP] = 0.
*/
- mtdcr(PLB0_ACR, 0); /* PATCH HAB: WRITE PIPELINING OFF */
+ mtdcr(PLB4A0_ACR, 0); /* PATCH HAB: WRITE PIPELINING OFF */
/* Segment1 */
- mtdcr(PLB1_ACR, 0); /* PATCH HAB: WRITE PIPELINING OFF */
+ mtdcr(PLB4A1_ACR, 0); /* PATCH HAB: WRITE PIPELINING OFF */
return board_with_pci();
}