mpc8xx: remove IP860 board support

This board is still a non-generic board.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>
diff --git a/arch/powerpc/cpu/mpc8xx/Kconfig b/arch/powerpc/cpu/mpc8xx/Kconfig
index ef5c511..45e7d7e 100644
--- a/arch/powerpc/cpu/mpc8xx/Kconfig
+++ b/arch/powerpc/cpu/mpc8xx/Kconfig
@@ -13,9 +13,6 @@
 config TARGET_ESTEEM192E
 	bool "Support ESTEEM192E"
 
-config TARGET_IP860
-	bool "Support IP860"
-
 config TARGET_TQM823L
 	bool "Support TQM823L"
 
@@ -56,7 +53,6 @@
 
 source "board/cogent/Kconfig"
 source "board/esteem192e/Kconfig"
-source "board/ip860/Kconfig"
 source "board/tqc/tqm8xx/Kconfig"
 
 endmenu
diff --git a/arch/powerpc/cpu/mpc8xx/cpu_init.c b/arch/powerpc/cpu/mpc8xx/cpu_init.c
index 753d25d..f621d62 100644
--- a/arch/powerpc/cpu/mpc8xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc8xx/cpu_init.c
@@ -125,12 +125,6 @@
 	 *  I owe him a free beer. - wd]
 	 */
 
-#if defined(CONFIG_IP860)	|| \
-    defined(CONFIG_RMU)
-
-	memctl->memc_br0 = CONFIG_SYS_BR0_PRELIM;
-#endif
-
 #if defined(CONFIG_SYS_OR0_REMAP)
 	memctl->memc_or0 = CONFIG_SYS_OR0_REMAP;
 #endif
@@ -150,10 +144,6 @@
 	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
 #endif
 
-#if defined(CONFIG_IP860) /* disable CS0 now that Flash is mapped on CS1 */
-	memctl->memc_br0 = 0;
-#endif
-
 #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
 	memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
 	memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
diff --git a/arch/powerpc/cpu/mpc8xx/serial.c b/arch/powerpc/cpu/mpc8xx/serial.c
index bb16b17..af65c96 100644
--- a/arch/powerpc/cpu/mpc8xx/serial.c
+++ b/arch/powerpc/cpu/mpc8xx/serial.c
@@ -416,18 +416,13 @@
 	cp->cp_pbdir &= ~0x06;
 	cp->cp_pbodr &= ~0x06;
 
-#elif (SCC_INDEX < 2) || !defined(CONFIG_IP860)
+#elif (SCC_INDEX < 2)
 	/*
 	 * Standard configuration for SCC's is on Part A
 	 */
 	ip->iop_papar |=  ((3 << (2 * SCC_INDEX)));
 	ip->iop_padir &= ~((3 << (2 * SCC_INDEX)));
 	ip->iop_paodr &= ~((3 << (2 * SCC_INDEX)));
-#else
-	/*
-	 * The IP860 has SCC3 and SCC4 on Port D
-	 */
-	ip->iop_pdpar |=  ((3 << (2 * SCC_INDEX)));
 #endif
 
 	/* Allocate space for two buffer descriptors in the DP ram. */