adp-ag101: add board adp-ag101 support
Add evaluation board "adp-ag101" configuration file adp-ag101.h.
Add adp-ag101.c board config and related settings.
Add board adp-ag101 into boards.cfg
Signed-off-by: Macpaul Lin <macpaul@andestech.com>
diff --git a/board/AndesTech/adp-ag101/adp-ag101.c b/board/AndesTech/adp-ag101/adp-ag101.c
new file mode 100644
index 0000000..82ce4c9
--- /dev/null
+++ b/board/AndesTech/adp-ag101/adp-ag101.c
@@ -0,0 +1,89 @@
+/*
+ * Copyright (C) 2011 Andes Technology Corporation
+ * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
+ * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <asm/io.h>
+
+#include <faraday/ftsdc010.h>
+#include <faraday/ftsmc020.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Miscellaneous platform dependent initializations
+ */
+
+int board_init(void)
+{
+ /*
+ * refer to BOOT_PARAMETER_PA_BASE within
+ * "linux/arch/nds32/include/asm/misc_spec.h"
+ */
+ gd->bd->bi_arch_number = MACH_TYPE_ADPAG101;
+ gd->bd->bi_boot_params = PHYS_SDRAM_0 + 0x400;
+
+ ftsmc020_init(); /* initialize Flash */
+ return 0;
+}
+
+int dram_init(void)
+{
+ unsigned long sdram_base = PHYS_SDRAM_0;
+ unsigned long expected_size = PHYS_SDRAM_0_SIZE;
+ unsigned long actual_size;
+
+ actual_size = get_ram_size((void *)sdram_base, expected_size);
+
+ gd->ram_size = actual_size;
+
+ if (expected_size != actual_size) {
+ printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
+ actual_size >> 20, expected_size >> 20);
+ }
+
+ return 0;
+}
+
+int board_eth_init(bd_t *bd)
+{
+ return ftmac100_initialize(bd);
+}
+
+ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
+{
+ if (banknum == 0) { /* non-CFI boot flash */
+ info->portwidth = FLASH_CFI_8BIT;
+ info->chipwidth = FLASH_CFI_BY8;
+ info->interface = FLASH_CFI_X8;
+ return 1;
+ } else {
+ return 0;
+ }
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ ftsdc010_mmc_init(0);
+ return 0;
+}