blob: 8d6065196fab74f9de3e4dd6c79989abdc485fff [file] [log] [blame]
/*
* (C) Copyright 2004-2008
* Texas Instruments, <www.ti.com>
*
* Author :
* Sunil Kumar <sunilsaini05@gmail.com>
* Shashi Ranjan <shashiranjanmca05@gmail.com>
*
* Derived from Beagle Board and 3430 SDP code by
* Richard Woodruff <r-woodruff2@ti.com>
* Syed Mohammed Khasim <khasim@ti.com>
*
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/mux.h>
#include <asm/arch/sys_proto.h>
#include <asm/mach-types.h>
#include "beagle.h"
static int beagle_revision_c;
/******************************************************************************
* Routine: board_init
* Description: Early hardware init.
*****************************************************************************/
int board_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
/* board id for Linux */
gd->bd->bi_arch_number = MACH_TYPE_OMAP3_BEAGLE;
/* boot param addr */
gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
return 0;
}
/******************************************************************************
* Routine: beagle_get_revision
* Description: Return revision of the BeagleBoard this code is running on.
* If it is a revision Ax/Bx board, this function returns 0,
* on a revision C board you will get a 1.
*****************************************************************************/
int beagle_get_revision(void)
{
return beagle_revision_c;
}
/******************************************************************************
* Routine: beagle_identify
* Description: Detect if we are running on a Beagle revision Ax/Bx or
* Cx. This can be done by GPIO_171. If this is low, we are
* running on a revision C board.
*****************************************************************************/
void beagle_identify(void)
{
gpio_t *gpio6_base = (gpio_t *)OMAP34XX_GPIO6_BASE;
/* Configure GPIO 171 as input */
writel(readl(&gpio6_base->oe) | GPIO11, &gpio6_base->oe);
/* Get value of GPIO 171 */
beagle_revision_c = readl(&gpio6_base->datain) & BOARD_REVISION_MASK;
printf("Board revision ");
if (beagle_revision_c) {
printf("Ax/Bx\n");
beagle_revision_c = 0;
} else {
printf("C\n");
beagle_revision_c = 1;
}
}
/******************************************************************************
* Routine: misc_init_r
* Description: Configure board specific parts
*****************************************************************************/
int misc_init_r(void)
{
gpio_t *gpio5_base = (gpio_t *)OMAP34XX_GPIO5_BASE;
gpio_t *gpio6_base = (gpio_t *)OMAP34XX_GPIO6_BASE;
power_init_r();
/* Configure GPIOs to output */
writel(~(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1), &gpio6_base->oe);
writel(~(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 |
GPIO15 | GPIO14 | GPIO13 | GPIO12), &gpio5_base->oe);
/* Set GPIOs */
writel(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1,
&gpio6_base->setdataout);
writel(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 |
GPIO15 | GPIO14 | GPIO13 | GPIO12, &gpio5_base->setdataout);
beagle_identify();
dieid_num_r();
return 0;
}
/******************************************************************************
* Routine: set_muxconf_regs
* Description: Setting up the configuration Mux registers specific to the
* hardware. Many pins need to be moved from protect to primary
* mode.
*****************************************************************************/
void set_muxconf_regs(void)
{
MUX_BEAGLE();
}