dm: extcon: add an uclass for extcon
Add a new simple uclass for extcon. Currently all setup is done
in the probe. Uclass struct and ops are empty for now.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 9101e53..75937fb 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -36,6 +36,8 @@
source "drivers/dma/Kconfig"
+source "drivers/extcon/Kconfig"
+
source "drivers/fastboot/Kconfig"
source "drivers/firmware/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index 58be410..ed1e71c 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -9,6 +9,7 @@
obj-$(CONFIG_$(SPL_TPL_)DMA) += dma/
obj-$(CONFIG_$(SPL_TPL_)DMA_LEGACY) += dma/
obj-$(CONFIG_$(SPL_TPL_)DFU) += dfu/
+obj-$(CONFIG_$(SPL_TPL_)EXTCON) += extcon/
obj-$(CONFIG_$(SPL_TPL_)GPIO) += gpio/
obj-$(CONFIG_$(SPL_TPL_)DRIVERS_MISC) += misc/
obj-$(CONFIG_$(SPL_TPL_)SYSRESET) += sysreset/
diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
new file mode 100644
index 0000000..8a50250
--- /dev/null
+++ b/drivers/extcon/Kconfig
@@ -0,0 +1,15 @@
+menu "Extcon Support"
+
+config EXTCON
+ bool "External Connector Class (extcon) support"
+ depends on DM
+ help
+ Say Y here to enable external connector class (extcon) support.
+ This allows monitoring external connectors and supports external
+ connectors with multiple states; i.e., an extcon that may have
+ multiple cables attached. For example, an external connector
+ of a device may be used to connect an HDMI cable and a AC adaptor,
+ and to host USB ports. Many of 30-pin connectors including PDMI
+ are also good examples.
+
+endmenu
diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile
new file mode 100644
index 0000000..2510e91
--- /dev/null
+++ b/drivers/extcon/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2023 Svyatoslav Ryhel <clamor95@gmail.com>
+
+obj-$(CONFIG_EXTCON) += extcon-uclass.o
diff --git a/drivers/extcon/extcon-uclass.c b/drivers/extcon/extcon-uclass.c
new file mode 100644
index 0000000..9dd22b5
--- /dev/null
+++ b/drivers/extcon/extcon-uclass.c
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2023 Svyatoslav Ryhel <clamor95@gmail.com>
+ */
+
+#define LOG_CATEGORY UCLASS_EXTCON
+
+#include <common.h>
+#include <extcon.h>
+#include <dm.h>
+
+UCLASS_DRIVER(extcon) = {
+ .id = UCLASS_EXTCON,
+ .name = "extcon",
+ .per_device_plat_auto = sizeof(struct extcon_uc_plat),
+};
diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h
index 5386c3fa..307ad69 100644
--- a/include/dm/uclass-id.h
+++ b/include/dm/uclass-id.h
@@ -56,6 +56,7 @@
UCLASS_EFI_MEDIA, /* Devices provided by UEFI firmware */
UCLASS_ETH, /* Ethernet device */
UCLASS_ETH_PHY, /* Ethernet PHY device */
+ UCLASS_EXTCON, /* External Connector Class */
UCLASS_FIRMWARE, /* Firmware */
UCLASS_FPGA, /* FPGA device */
UCLASS_FUZZING_ENGINE, /* Fuzzing engine */
diff --git a/include/extcon.h b/include/extcon.h
new file mode 100644
index 0000000..d060f5a
--- /dev/null
+++ b/include/extcon.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2023 Svyatoslav Ryhel <clamor95@gmail.com>
+ */
+
+#ifndef __EXTCON_H
+#define __EXTCON_H
+
+struct udevice;
+
+/**
+ * struct extcon_uc_plat - Platform data the uclass stores about each device
+ *
+ * To be filled
+ */
+struct extcon_uc_plat {
+};
+
+#endif