mpc83xx: Add MPC8360EMDS basic board support
Add support for the Freescale MPC8360EMDS board.
Includes DDR, DUART, Local Bus, PCI.
diff --git a/MAKEALL b/MAKEALL
index c29dd54..6232761 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -130,7 +130,7 @@
#########################################################################
LIST_83xx=" \
- TQM834x MPC8349EMDS MPC8349ITX \
+ TQM834x MPC8349EMDS MPC8349ITX MPC8360EMDS \
"
diff --git a/Makefile b/Makefile
index ac7ca4a..323aafc 100644
--- a/Makefile
+++ b/Makefile
@@ -1582,15 +1582,36 @@
## MPC83xx Systems
#########################################################################
-MPC8349ADS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349ads
-
TQM834x_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x
MPC8349EMDS_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds
+MPC8360EMDS_config \
+MPC8360EMDS_HOST_33_config \
+MPC8360EMDS_HOST_66_config \
+MPC8360EMDS_SLAVE_config: unconfig
+ @echo "" >include/config.h ; \
+ if [ "$(findstring _HOST_,$@)" ] ; then \
+ echo -n "... PCI HOST " ; \
+ echo "#define CONFIG_PCI" >>include/config.h ; \
+ fi ; \
+ if [ "$(findstring _SLAVE_,$@)" ] ; then \
+ echo "...PCI SLAVE 66M" ; \
+ echo "#define CONFIG_PCI" >>include/config.h ; \
+ echo "#define CONFIG_PCISLAVE" >>include/config.h ; \
+ fi ; \
+ if [ "$(findstring _33_,$@)" ] ; then \
+ echo -n "...33M ..." ; \
+ echo "#define PCI_33M" >>include/config.h ; \
+ fi ; \
+ if [ "$(findstring _66_,$@)" ] ; then \
+ echo -n "...66M..." ; \
+ echo "#define PCI_66M" >>include/config.h ; \
+ fi ;
+ @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds
+
MPC8349ITX_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349itx
diff --git a/board/mpc8360emds/Makefile b/board/mpc8360emds/Makefile
new file mode 100644
index 0000000..5ec7a87
--- /dev/null
+++ b/board/mpc8360emds/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o pci.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/mpc8360emds/config.mk b/board/mpc8360emds/config.mk
new file mode 100644
index 0000000..9ace886
--- /dev/null
+++ b/board/mpc8360emds/config.mk
@@ -0,0 +1,28 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# MPC8360EMDS
+#
+
+TEXT_BASE = 0xFE000000
diff --git a/board/mpc8360emds/mpc8360emds.c b/board/mpc8360emds/mpc8360emds.c
new file mode 100644
index 0000000..d70a4c3
--- /dev/null
+++ b/board/mpc8360emds/mpc8360emds.c
@@ -0,0 +1,574 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ *
+ * Dave Liu <daveliu@freescale.com>
+ * based on board/mpc8349emds/mpc8349emds.c
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <mpc83xx.h>
+#include <i2c.h>
+#include <spd.h>
+#include <miiphy.h>
+#include <command.h>
+#if defined(CONFIG_PCI)
+#include <pci.h>
+#endif
+#if defined(CONFIG_SPD_EEPROM)
+#include <spd_sdram.h>
+#else
+#include <asm/mmu.h>
+#endif
+
+int board_early_init_f(void)
+{
+ volatile u8 *bcsr = (volatile u8 *)CFG_BCSR;
+
+ /* Enable flash write */
+ bcsr[0xa] &= ~0x04;
+
+ return 0;
+}
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
+extern void ddr_enable_ecc(unsigned int dram_size);
+#endif
+int fixed_sdram(void);
+void sdram_init(void);
+
+long int initdram(int board_type)
+{
+ volatile immap_t *im = (immap_t *) CFG_IMMRBAR;
+ u32 msize = 0;
+
+ if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
+ return -1;
+
+ /* DDR SDRAM - Main SODIMM */
+ im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
+#if defined(CONFIG_SPD_EEPROM)
+ msize = spd_sdram();
+#else
+ msize = fixed_sdram();
+#endif
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
+ /*
+ * Initialize DDR ECC byte
+ */
+ ddr_enable_ecc(msize * 1024 * 1024);
+#endif
+ /*
+ * Initialize SDRAM if it is on local bus.
+ */
+ sdram_init();
+ puts(" DDR RAM: ");
+ /* return total bus SDRAM size(bytes) -- DDR */
+ return (msize * 1024 * 1024);
+}
+
+#if !defined(CONFIG_SPD_EEPROM)
+/*************************************************************************
+ * fixed sdram init -- doesn't use serial presence detect.
+ ************************************************************************/
+int fixed_sdram(void)
+{
+ volatile immap_t *im = (immap_t *) CFG_IMMRBAR;
+ u32 msize = 0;
+ u32 ddr_size;
+ u32 ddr_size_log2;
+
+ msize = CFG_DDR_SIZE;
+ for (ddr_size = msize << 20, ddr_size_log2 = 0;
+ (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) {
+ if (ddr_size & 1) {
+ return -1;
+ }
+ }
+ im->sysconf.ddrlaw[0].ar =
+ LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
+#if (CFG_DDR_SIZE != 256)
+#warning Currenly any ddr size other than 256 is not supported
+#endif
+ im->ddr.csbnds[0].csbnds = 0x00000007;
+ im->ddr.csbnds[1].csbnds = 0x0008000f;
+
+ im->ddr.cs_config[0] = CFG_DDR_CONFIG;
+ im->ddr.cs_config[1] = CFG_DDR_CONFIG;
+
+ im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
+ im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
+ im->ddr.sdram_cfg = CFG_DDR_CONTROL;
+
+ im->ddr.sdram_mode = CFG_DDR_MODE;
+ im->ddr.sdram_interval = CFG_DDR_INTERVAL;
+ udelay(200);
+ im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
+
+ return msize;
+}
+#endif /*!CFG_SPD_EEPROM */
+
+int checkboard(void)
+{
+ puts("Board: Freescale MPC8360EMDS\n");
+ return 0;
+}
+
+/*
+ * if MPC8360EMDS is soldered with SDRAM
+ */
+#if defined(CFG_BR2_PRELIM) \
+ && defined(CFG_OR2_PRELIM) \
+ && defined(CFG_LBLAWBAR2_PRELIM) \
+ && defined(CFG_LBLAWAR2_PRELIM)
+/*
+ * Initialize SDRAM memory on the Local Bus.
+ */
+
+void sdram_init(void)
+{
+ volatile immap_t *immap = (immap_t *) CFG_IMMRBAR;
+ volatile lbus83xx_t *lbc = &immap->lbus;
+ uint *sdram_addr = (uint *) CFG_LBC_SDRAM_BASE;
+
+ puts("\n SDRAM on Local Bus: ");
+ print_size(CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+ /*
+ * Setup SDRAM Base and Option Registers, already done in cpu_init.c
+ */
+ /*setup mtrpt, lsrt and lbcr for LB bus */
+ lbc->lbcr = CFG_LBC_LBCR;
+ lbc->mrtpr = CFG_LBC_MRTPR;
+ lbc->lsrt = CFG_LBC_LSRT;
+ asm("sync");
+
+ /*
+ * Configure the SDRAM controller Machine Mode Register.
+ */
+ lbc->lsdmr = CFG_LBC_LSDMR_5; /* Normal Operation */
+ lbc->lsdmr = CFG_LBC_LSDMR_1; /* Precharge All Banks */
+ asm("sync");
+ *sdram_addr = 0xff;
+ udelay(100);
+
+ /*
+ * We need do 8 times auto refresh operation.
+ */
+ lbc->lsdmr = CFG_LBC_LSDMR_2;
+ asm("sync");
+ *sdram_addr = 0xff; /* 1 times */
+ udelay(100);
+ *sdram_addr = 0xff; /* 2 times */
+ udelay(100);
+ *sdram_addr = 0xff; /* 3 times */
+ udelay(100);
+ *sdram_addr = 0xff; /* 4 times */
+ udelay(100);
+ *sdram_addr = 0xff; /* 5 times */
+ udelay(100);
+ *sdram_addr = 0xff; /* 6 times */
+ udelay(100);
+ *sdram_addr = 0xff; /* 7 times */
+ udelay(100);
+ *sdram_addr = 0xff; /* 8 times */
+ udelay(100);
+
+ /* Mode register write operation */
+ lbc->lsdmr = CFG_LBC_LSDMR_4;
+ asm("sync");
+ *(sdram_addr + 0xcc) = 0xff;
+ udelay(100);
+
+ /* Normal operation */
+ lbc->lsdmr = CFG_LBC_LSDMR_5 | 0x40000000;
+ asm("sync");
+ *sdram_addr = 0xff;
+ udelay(100);
+}
+#else
+void sdram_init(void)
+{
+ puts("SDRAM on Local Bus is NOT available!\n");
+}
+#endif
+
+#if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD)
+/*
+ * ECC user commands
+ */
+void ecc_print_status(void)
+{
+ volatile immap_t *immap = (immap_t *) CFG_IMMRBAR;
+ volatile ddr83xx_t *ddr = &immap->ddr;
+
+ printf("\nECC mode: %s\n\n",
+ (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF");
+
+ /* Interrupts */
+ printf("Memory Error Interrupt Enable:\n");
+ printf(" Multiple-Bit Error Interrupt Enable: %d\n",
+ (ddr->err_int_en & ECC_ERR_INT_EN_MBEE) ? 1 : 0);
+ printf(" Single-Bit Error Interrupt Enable: %d\n",
+ (ddr->err_int_en & ECC_ERR_INT_EN_SBEE) ? 1 : 0);
+ printf(" Memory Select Error Interrupt Enable: %d\n\n",
+ (ddr->err_int_en & ECC_ERR_INT_EN_MSEE) ? 1 : 0);
+
+ /* Error disable */
+ printf("Memory Error Disable:\n");
+ printf(" Multiple-Bit Error Disable: %d\n",
+ (ddr->err_disable & ECC_ERROR_DISABLE_MBED) ? 1 : 0);
+ printf(" Sinle-Bit Error Disable: %d\n",
+ (ddr->err_disable & ECC_ERROR_DISABLE_SBED) ? 1 : 0);
+ printf(" Memory Select Error Disable: %d\n\n",
+ (ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0);
+
+ /* Error injection */
+ printf("Memory Data Path Error Injection Mask High/Low: %08lx %08lx\n",
+ ddr->data_err_inject_hi, ddr->data_err_inject_lo);
+
+ printf("Memory Data Path Error Injection Mask ECC:\n");
+ printf(" ECC Mirror Byte: %d\n",
+ (ddr->ecc_err_inject & ECC_ERR_INJECT_EMB) ? 1 : 0);
+ printf(" ECC Injection Enable: %d\n",
+ (ddr->ecc_err_inject & ECC_ERR_INJECT_EIEN) ? 1 : 0);
+ printf(" ECC Error Injection Mask: 0x%02x\n\n",
+ ddr->ecc_err_inject & ECC_ERR_INJECT_EEIM);
+
+ /* SBE counter/threshold */
+ printf("Memory Single-Bit Error Management (0..255):\n");
+ printf(" Single-Bit Error Threshold: %d\n",
+ (ddr->err_sbe & ECC_ERROR_MAN_SBET) >> ECC_ERROR_MAN_SBET_SHIFT);
+ printf(" Single-Bit Error Counter: %d\n\n",
+ (ddr->err_sbe & ECC_ERROR_MAN_SBEC) >> ECC_ERROR_MAN_SBEC_SHIFT);
+
+ /* Error detect */
+ printf("Memory Error Detect:\n");
+ printf(" Multiple Memory Errors: %d\n",
+ (ddr->err_detect & ECC_ERROR_DETECT_MME) ? 1 : 0);
+ printf(" Multiple-Bit Error: %d\n",
+ (ddr->err_detect & ECC_ERROR_DETECT_MBE) ? 1 : 0);
+ printf(" Single-Bit Error: %d\n",
+ (ddr->err_detect & ECC_ERROR_DETECT_SBE) ? 1 : 0);
+ printf(" Memory Select Error: %d\n\n",
+ (ddr->err_detect & ECC_ERROR_DETECT_MSE) ? 1 : 0);
+
+ /* Capture data */
+ printf("Memory Error Address Capture: 0x%08lx\n", ddr->capture_address);
+ printf("Memory Data Path Read Capture High/Low: %08lx %08lx\n",
+ ddr->capture_data_hi, ddr->capture_data_lo);
+ printf("Memory Data Path Read Capture ECC: 0x%02x\n\n",
+ ddr->capture_ecc & CAPTURE_ECC_ECE);
+
+ printf("Memory Error Attributes Capture:\n");
+ printf(" Data Beat Number: %d\n",
+ (ddr->capture_attributes & ECC_CAPT_ATTR_BNUM) >>
+ ECC_CAPT_ATTR_BNUM_SHIFT);
+ printf(" Transaction Size: %d\n",
+ (ddr->capture_attributes & ECC_CAPT_ATTR_TSIZ) >>
+ ECC_CAPT_ATTR_TSIZ_SHIFT);
+ printf(" Transaction Source: %d\n",
+ (ddr->capture_attributes & ECC_CAPT_ATTR_TSRC) >>
+ ECC_CAPT_ATTR_TSRC_SHIFT);
+ printf(" Transaction Type: %d\n",
+ (ddr->capture_attributes & ECC_CAPT_ATTR_TTYP) >>
+ ECC_CAPT_ATTR_TTYP_SHIFT);
+ printf(" Error Information Valid: %d\n\n",
+ ddr->capture_attributes & ECC_CAPT_ATTR_VLD);
+}
+
+int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ volatile immap_t *immap = (immap_t *) CFG_IMMRBAR;
+ volatile ddr83xx_t *ddr = &immap->ddr;
+ volatile u32 val;
+ u64 *addr;
+ u32 count;
+ register u64 *i;
+ u32 ret[2];
+ u32 pattern[2];
+ u32 writeback[2];
+
+ /* The pattern is written into memory to generate error */
+ pattern[0] = 0xfedcba98UL;
+ pattern[1] = 0x76543210UL;
+
+ /* After injecting error, re-initialize the memory with the value */
+ writeback[0] = 0x01234567UL;
+ writeback[1] = 0x89abcdefUL;
+
+ if (argc > 4) {
+ printf("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+
+ if (argc == 2) {
+ if (strcmp(argv[1], "status") == 0) {
+ ecc_print_status();
+ return 0;
+ } else if (strcmp(argv[1], "captureclear") == 0) {
+ ddr->capture_address = 0;
+ ddr->capture_data_hi = 0;
+ ddr->capture_data_lo = 0;
+ ddr->capture_ecc = 0;
+ ddr->capture_attributes = 0;
+ return 0;
+ }
+ }
+ if (argc == 3) {
+ if (strcmp(argv[1], "sbecnt") == 0) {
+ val = simple_strtoul(argv[2], NULL, 10);
+ if (val > 255) {
+ printf("Incorrect Counter value, "
+ "should be 0..255\n");
+ return 1;
+ }
+
+ val = (val << ECC_ERROR_MAN_SBEC_SHIFT);
+ val |= (ddr->err_sbe & ECC_ERROR_MAN_SBET);
+
+ ddr->err_sbe = val;
+ return 0;
+ } else if (strcmp(argv[1], "sbethr") == 0) {
+ val = simple_strtoul(argv[2], NULL, 10);
+ if (val > 255) {
+ printf("Incorrect Counter value, "
+ "should be 0..255\n");
+ return 1;
+ }
+
+ val = (val << ECC_ERROR_MAN_SBET_SHIFT);
+ val |= (ddr->err_sbe & ECC_ERROR_MAN_SBEC);
+
+ ddr->err_sbe = val;
+ return 0;
+ } else if (strcmp(argv[1], "errdisable") == 0) {
+ val = ddr->err_disable;
+
+ if (strcmp(argv[2], "+sbe") == 0) {
+ val |= ECC_ERROR_DISABLE_SBED;
+ } else if (strcmp(argv[2], "+mbe") == 0) {
+ val |= ECC_ERROR_DISABLE_MBED;
+ } else if (strcmp(argv[2], "+mse") == 0) {
+ val |= ECC_ERROR_DISABLE_MSED;
+ } else if (strcmp(argv[2], "+all") == 0) {
+ val |= (ECC_ERROR_DISABLE_SBED |
+ ECC_ERROR_DISABLE_MBED |
+ ECC_ERROR_DISABLE_MSED);
+ } else if (strcmp(argv[2], "-sbe") == 0) {
+ val &= ~ECC_ERROR_DISABLE_SBED;
+ } else if (strcmp(argv[2], "-mbe") == 0) {
+ val &= ~ECC_ERROR_DISABLE_MBED;
+ } else if (strcmp(argv[2], "-mse") == 0) {
+ val &= ~ECC_ERROR_DISABLE_MSED;
+ } else if (strcmp(argv[2], "-all") == 0) {
+ val &= ~(ECC_ERROR_DISABLE_SBED |
+ ECC_ERROR_DISABLE_MBED |
+ ECC_ERROR_DISABLE_MSED);
+ } else {
+ printf("Incorrect err_disable field\n");
+ return 1;
+ }
+
+ ddr->err_disable = val;
+ __asm__ __volatile__("sync");
+ __asm__ __volatile__("isync");
+ return 0;
+ } else if (strcmp(argv[1], "errdetectclr") == 0) {
+ val = ddr->err_detect;
+
+ if (strcmp(argv[2], "mme") == 0) {
+ val |= ECC_ERROR_DETECT_MME;
+ } else if (strcmp(argv[2], "sbe") == 0) {
+ val |= ECC_ERROR_DETECT_SBE;
+ } else if (strcmp(argv[2], "mbe") == 0) {
+ val |= ECC_ERROR_DETECT_MBE;
+ } else if (strcmp(argv[2], "mse") == 0) {
+ val |= ECC_ERROR_DETECT_MSE;
+ } else if (strcmp(argv[2], "all") == 0) {
+ val |= (ECC_ERROR_DETECT_MME |
+ ECC_ERROR_DETECT_MBE |
+ ECC_ERROR_DETECT_SBE |
+ ECC_ERROR_DETECT_MSE);
+ } else {
+ printf("Incorrect err_detect field\n");
+ return 1;
+ }
+
+ ddr->err_detect = val;
+ return 0;
+ } else if (strcmp(argv[1], "injectdatahi") == 0) {
+ val = simple_strtoul(argv[2], NULL, 16);
+
+ ddr->data_err_inject_hi = val;
+ return 0;
+ } else if (strcmp(argv[1], "injectdatalo") == 0) {
+ val = simple_strtoul(argv[2], NULL, 16);
+
+ ddr->data_err_inject_lo = val;
+ return 0;
+ } else if (strcmp(argv[1], "injectecc") == 0) {
+ val = simple_strtoul(argv[2], NULL, 16);
+ if (val > 0xff) {
+ printf("Incorrect ECC inject mask, "
+ "should be 0x00..0xff\n");
+ return 1;
+ }
+ val |= (ddr->ecc_err_inject & ~ECC_ERR_INJECT_EEIM);
+
+ ddr->ecc_err_inject = val;
+ return 0;
+ } else if (strcmp(argv[1], "inject") == 0) {
+ val = ddr->ecc_err_inject;
+
+ if (strcmp(argv[2], "en") == 0)
+ val |= ECC_ERR_INJECT_EIEN;
+ else if (strcmp(argv[2], "dis") == 0)
+ val &= ~ECC_ERR_INJECT_EIEN;
+ else
+ printf("Incorrect command\n");
+
+ ddr->ecc_err_inject = val;
+ __asm__ __volatile__("sync");
+ __asm__ __volatile__("isync");
+ return 0;
+ } else if (strcmp(argv[1], "mirror") == 0) {
+ val = ddr->ecc_err_inject;
+
+ if (strcmp(argv[2], "en") == 0)
+ val |= ECC_ERR_INJECT_EMB;
+ else if (strcmp(argv[2], "dis") == 0)
+ val &= ~ECC_ERR_INJECT_EMB;
+ else
+ printf("Incorrect command\n");
+
+ ddr->ecc_err_inject = val;
+ return 0;
+ }
+ }
+ if (argc == 4) {
+ if (strcmp(argv[1], "testdw") == 0) {
+ addr = (u64 *) simple_strtoul(argv[2], NULL, 16);
+ count = simple_strtoul(argv[3], NULL, 16);
+
+ if ((u32) addr % 8) {
+ printf("Address not alligned on "
+ "double word boundary\n");
+ return 1;
+ }
+ disable_interrupts();
+
+ for (i = addr; i < addr + count; i++) {
+
+ /* enable injects */
+ ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
+ __asm__ __volatile__("sync");
+ __asm__ __volatile__("isync");
+
+ /* write memory location injecting errors */
+ ppcDWstore((u32 *) i, pattern);
+
+ /* disable injects */
+ ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
+ __asm__ __volatile__("sync");
+ __asm__ __volatile__("isync");
+
+ /* read data, this generates ECC error */
+ ppcDWload((u32 *) i, ret);
+
+ /* re-initialize memory, double word write the location again,
+ * generates new ECC code this time */
+ ppcDWstore((u32 *) i, writeback);
+ }
+ enable_interrupts();
+ return 0;
+ }
+ if (strcmp(argv[1], "testword") == 0) {
+ addr = (u64 *) simple_strtoul(argv[2], NULL, 16);
+ count = simple_strtoul(argv[3], NULL, 16);
+
+ if ((u32) addr % 8) {
+ printf("Address not alligned on "
+ "double word boundary\n");
+ return 1;
+ }
+ disable_interrupts();
+
+ for (i = addr; i < addr + count; i++) {
+
+ /* enable injects */
+ ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
+ __asm__ __volatile__("sync");
+ __asm__ __volatile__("isync");
+
+ /* write memory location injecting errors */
+ *(u32 *) i = 0xfedcba98UL;
+ __asm__ __volatile__("sync");
+
+ /* sub double word write,
+ * bus will read-modify-write,
+ * generates ECC error */
+ *((u32 *) i + 1) = 0x76543210UL;
+ __asm__ __volatile__("sync");
+
+ /* disable injects */
+ ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
+ __asm__ __volatile__("sync");
+ __asm__ __volatile__("isync");
+
+ /* re-initialize memory,
+ * double word write the location again,
+ * generates new ECC code this time */
+ ppcDWstore((u32 *) i, writeback);
+ }
+ enable_interrupts();
+ return 0;
+ }
+ }
+ printf("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+}
+
+U_BOOT_CMD(ecc, 4, 0, do_ecc,
+ "ecc - support for DDR ECC features\n",
+ "status - print out status info\n"
+ "ecc captureclear - clear capture regs data\n"
+ "ecc sbecnt <val> - set Single-Bit Error counter\n"
+ "ecc sbethr <val> - set Single-Bit Threshold\n"
+ "ecc errdisable <flag> - clear/set disable Memory Error Disable, flag:\n"
+ " [-|+]sbe - Single-Bit Error\n"
+ " [-|+]mbe - Multiple-Bit Error\n"
+ " [-|+]mse - Memory Select Error\n"
+ " [-|+]all - all errors\n"
+ "ecc errdetectclr <flag> - clear Memory Error Detect, flag:\n"
+ " mme - Multiple Memory Errors\n"
+ " sbe - Single-Bit Error\n"
+ " mbe - Multiple-Bit Error\n"
+ " mse - Memory Select Error\n"
+ " all - all errors\n"
+ "ecc injectdatahi <hi> - set Memory Data Path Error Injection Mask High\n"
+ "ecc injectdatalo <lo> - set Memory Data Path Error Injection Mask Low\n"
+ "ecc injectecc <ecc> - set ECC Error Injection Mask\n"
+ "ecc inject <en|dis> - enable/disable error injection\n"
+ "ecc mirror <en|dis> - enable/disable mirror byte\n"
+ "ecc testdw <addr> <cnt> - test mem region with double word access:\n"
+ " - enables injects\n"
+ " - writes pattern injecting errors with double word access\n"
+ " - disables injects\n"
+ " - reads pattern back with double word access, generates error\n"
+ " - re-inits memory\n"
+ "ecc testword <addr> <cnt> - test mem region with word access:\n"
+ " - enables injects\n"
+ " - writes pattern injecting errors with word access\n"
+ " - writes pattern with word access, generates error\n"
+ " - disables injects\n" " - re-inits memory");
+#endif /* if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) */
diff --git a/board/mpc8360emds/pci.c b/board/mpc8360emds/pci.c
new file mode 100644
index 0000000..880b2ec
--- /dev/null
+++ b/board/mpc8360emds/pci.c
@@ -0,0 +1,294 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/*
+ * PCI Configuration space access support for MPC83xx PCI Bridge
+ */
+#include <asm/mmu.h>
+#include <asm/io.h>
+#include <common.h>
+#include <pci.h>
+#include <i2c.h>
+
+#include <asm/i2c.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_PCI)
+#define PCI_FUNCTION_CONFIG 0x44
+#define PCI_FUNCTION_CFG_LOCK 0x20
+
+/*
+ * Initialize PCI Devices, report devices found
+ */
+#ifndef CONFIG_PCI_PNP
+static struct pci_config_table pci_mpc83xxemds_config_table[] = {
+ {
+ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ pci_cfgfunc_config_device,
+ {PCI_ENET0_IOADDR,
+ PCI_ENET0_MEMADDR,
+ PCI_COMMON_MEMORY | PCI_COMMAND_MASTER}
+ },
+ {}
+}
+#endif
+static struct pci_controller hose[] = {
+ {
+#ifndef CONFIG_PCI_PNP
+ config_table:pci_mpc83xxemds_config_table,
+#endif
+ },
+};
+
+/**********************************************************************
+ * pci_init_board()
+ *********************************************************************/
+void pci_init_board(void)
+#ifdef CONFIG_PCISLAVE
+{
+ u16 reg16;
+ volatile immap_t *immr;
+ volatile law83xx_t *pci_law;
+ volatile pot83xx_t *pci_pot;
+ volatile pcictrl83xx_t *pci_ctrl;
+ volatile pciconf83xx_t *pci_conf;
+
+ immr = (immap_t *) CFG_IMMRBAR;
+ pci_law = immr->sysconf.pcilaw;
+ pci_pot = immr->ios.pot;
+ pci_ctrl = immr->pci_ctrl;
+ pci_conf = immr->pci_conf;
+ /*
+ * Configure PCI Inbound Translation Windows
+ */
+ pci_ctrl[0].pitar0 = 0x0;
+ pci_ctrl[0].pibar0 = 0x0;
+ pci_ctrl[0].piwar0 = PIWAR_EN | PIWAR_RTT_SNOOP |
+ PIWAR_WTT_SNOOP | PIWAR_IWS_4K;
+
+ pci_ctrl[0].pitar1 = 0x0;
+ pci_ctrl[0].pibar1 = 0x0;
+ pci_ctrl[0].piebar1 = 0x0;
+ pci_ctrl[0].piwar1 &= ~PIWAR_EN;
+
+ pci_ctrl[0].pitar2 = 0x0;
+ pci_ctrl[0].pibar2 = 0x0;
+ pci_ctrl[0].piebar2 = 0x0;
+ pci_ctrl[0].piwar2 &= ~PIWAR_EN;
+
+ hose[0].first_busno = 0;
+ hose[0].last_busno = 0xff;
+ pci_setup_indirect(&hose[0],
+ (CFG_IMMRBAR + 0x8300), (CFG_IMMRBAR + 0x8304));
+ reg16 = 0xff;
+
+ pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0),
+ PCI_COMMAND, ®16);
+ reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MEMORY;
+ pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0),
+ PCI_COMMAND, reg16);
+
+ /*
+ * Clear non-reserved bits in status register.
+ */
+ pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0),
+ PCI_STATUS, 0xffff);
+ pci_hose_write_config_byte(&hose[0], PCI_BDF(0, 0, 0),
+ PCI_LATENCY_TIMER, 0x80);
+
+ /*
+ * Unlock configuration lock in PCI function configuration register.
+ */
+ pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0),
+ PCI_FUNCTION_CONFIG, ®16);
+ reg16 &= ~(PCI_FUNCTION_CFG_LOCK);
+ pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0),
+ PCI_FUNCTION_CONFIG, reg16);
+
+ printf("Enabled PCI 32bit Agent Mode\n");
+}
+#else
+{
+ volatile immap_t *immr;
+ volatile clk83xx_t *clk;
+ volatile law83xx_t *pci_law;
+ volatile pot83xx_t *pci_pot;
+ volatile pcictrl83xx_t *pci_ctrl;
+ volatile pciconf83xx_t *pci_conf;
+
+ u8 val8, orig_i2c_bus;
+ u16 reg16;
+ u32 val32;
+ u32 dev;
+
+ immr = (immap_t *) CFG_IMMRBAR;
+ clk = (clk83xx_t *) & immr->clk;
+ pci_law = immr->sysconf.pcilaw;
+ pci_pot = immr->ios.pot;
+ pci_ctrl = immr->pci_ctrl;
+ pci_conf = immr->pci_conf;
+ /*
+ * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode
+ */
+ val32 = clk->occr;
+ udelay(2000);
+#if defined(PCI_66M)
+ clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2;
+ printf("PCI clock is 66MHz\n");
+#elif defined(PCI_33M)
+ clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 |
+ OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICR;
+ printf("PCI clock is 33MHz\n");
+#else
+ clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2;
+ printf("PCI clock is 66MHz\n");
+#endif
+ udelay(2000);
+
+ /*
+ * Configure PCI Local Access Windows
+ */
+ pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR;
+ pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M;
+
+ pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR;
+ pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_1M;
+
+ /*
+ * Configure PCI Outbound Translation Windows
+ */
+
+ /* PCI mem space - prefetch */
+ pci_pot[0].potar = (CFG_PCI_MEM_BASE >> 12) & POTAR_TA_MASK;
+ pci_pot[0].pobar = (CFG_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK;
+ pci_pot[0].pocmr =
+ POCMR_EN | POCMR_SE | (POCMR_CM_256M & POCMR_CM_MASK);
+
+ /* PCI mmio - non-prefetch mem space */
+ pci_pot[1].potar = (CFG_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK;
+ pci_pot[1].pobar = (CFG_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK;
+ pci_pot[1].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK);
+
+ /* PCI IO space */
+ pci_pot[2].potar = (CFG_PCI_IO_BASE >> 12) & POTAR_TA_MASK;
+ pci_pot[2].pobar = (CFG_PCI_IO_PHYS >> 12) & POBAR_BA_MASK;
+ pci_pot[2].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK);
+
+ /*
+ * Configure PCI Inbound Translation Windows
+ */
+ pci_ctrl[0].pitar1 = (CFG_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK;
+ pci_ctrl[0].pibar1 = (CFG_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK;
+ pci_ctrl[0].piebar1 = 0x0;
+ pci_ctrl[0].piwar1 =
+ PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP |
+ PIWAR_IWS_2G;
+
+ /*
+ * Assign PIB PMC slot to desired PCI bus
+ */
+
+ mpc83xx_i2c = (i2c_t *) (CFG_IMMRBAR + CFG_I2C2_OFFSET);
+ i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+
+ val8 = 0;
+ i2c_write(0x23, 0x6, 1, &val8, 1);
+ i2c_write(0x23, 0x7, 1, &val8, 1);
+ val8 = 0xff;
+ i2c_write(0x23, 0x2, 1, &val8, 1);
+ i2c_write(0x23, 0x3, 1, &val8, 1);
+
+ val8 = 0;
+ i2c_write(0x26, 0x6, 1, &val8, 1);
+ val8 = 0x34;
+ i2c_write(0x26, 0x7, 1, &val8, 1);
+
+ val8 = 0xf3; /*PMC1, PMC2, PMC3 slot to PCI bus */
+ i2c_write(0x26, 0x2, 1, &val8, 1);
+ val8 = 0xff;
+ i2c_write(0x26, 0x3, 1, &val8, 1);
+
+ val8 = 0;
+ i2c_write(0x27, 0x6, 1, &val8, 1);
+ i2c_write(0x27, 0x7, 1, &val8, 1);
+ val8 = 0xff;
+ i2c_write(0x27, 0x2, 1, &val8, 1);
+ val8 = 0xef;
+ i2c_write(0x27, 0x3, 1, &val8, 1);
+ asm("eieio");
+
+ /*
+ * Release PCI RST Output signal
+ */
+ udelay(2000);
+ pci_ctrl[0].gcr = 1;
+ udelay(2000);
+
+ hose[0].first_busno = 0;
+ hose[0].last_busno = 0xff;
+
+ /* PCI memory prefetch space */
+ pci_set_region(hose[0].regions + 0,
+ CFG_PCI_MEM_BASE,
+ CFG_PCI_MEM_PHYS,
+ CFG_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH);
+
+ /* PCI memory space */
+ pci_set_region(hose[0].regions + 1,
+ CFG_PCI_MMIO_BASE,
+ CFG_PCI_MMIO_PHYS, CFG_PCI_MMIO_SIZE, PCI_REGION_MEM);
+
+ /* PCI IO space */
+ pci_set_region(hose[0].regions + 2,
+ CFG_PCI_IO_BASE,
+ CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO);
+
+ /* System memory space */
+ pci_set_region(hose[0].regions + 3,
+ CFG_PCI_SLV_MEM_LOCAL,
+ CFG_PCI_SLV_MEM_BUS,
+ CFG_PCI_SLV_MEM_SIZE,
+ PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+ hose[0].region_count = 4;
+
+ pci_setup_indirect(&hose[0],
+ (CFG_IMMRBAR + 0x8300), (CFG_IMMRBAR + 0x8304));
+
+ pci_register_hose(hose);
+
+ /*
+ * Write command register
+ */
+ reg16 = 0xff;
+ dev = PCI_BDF(0, 0, 0);
+ pci_hose_read_config_word(&hose[0], dev, PCI_COMMAND, ®16);
+ reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_hose_write_config_word(&hose[0], dev, PCI_COMMAND, reg16);
+
+ /*
+ * Clear non-reserved bits in status register.
+ */
+ pci_hose_write_config_word(&hose[0], dev, PCI_STATUS, 0xffff);
+ pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80);
+ pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08);
+
+ printf("PCI 32bit bus on PMC1 & PMC2 & PMC3\n");
+
+ /*
+ * Hose scan.
+ */
+ hose->last_busno = pci_hose_scan(hose);
+}
+#endif /* CONFIG_PCISLAVE */
+#endif /* CONFIG_PCI */
diff --git a/board/mpc8360emds/u-boot.lds b/board/mpc8360emds/u-boot.lds
new file mode 100644
index 0000000..937c87a
--- /dev/null
+++ b/board/mpc8360emds/u-boot.lds
@@ -0,0 +1,123 @@
+/*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc83xx/start.o (.text)
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ . = ALIGN(16);
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ *(.eh_frame)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
+ENTRY(_start)
diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
index 4e82a8b..1de337b 100644
--- a/cpu/mpc83xx/cpu.c
+++ b/cpu/mpc83xx/cpu.c
@@ -43,28 +43,70 @@
int checkcpu(void)
{
+ volatile immap_t *immr;
ulong clock = gd->cpu_clk;
u32 pvr = get_pvr();
+ u32 spridr;
char buf[32];
+ immr = (immap_t *)CFG_IMMRBAR;
+
if ((pvr & 0xFFFF0000) != PVR_83xx) {
puts("Not MPC83xx Family!!!\n");
return -1;
}
- puts("CPU: MPC83xx, ");
- switch(pvr) {
- case PVR_8349_REV10:
+ spridr = immr->sysconf.spridr;
+ puts("CPU: ");
+ switch(spridr) {
+ case SPR_8349E_REV10:
+ case SPR_8349E_REV11:
+ puts("MPC8349E, ");
break;
- case PVR_8349_REV11:
+ case SPR_8349_REV10:
+ case SPR_8349_REV11:
+ puts("MPC8349, ");
+ break;
+ case SPR_8347E_REV10_TBGA:
+ case SPR_8347E_REV11_TBGA:
+ case SPR_8347E_REV10_PBGA:
+ case SPR_8347E_REV11_PBGA:
+ puts("MPC8347E, ");
+ break;
+ case SPR_8347_REV10_TBGA:
+ case SPR_8347_REV11_TBGA:
+ case SPR_8347_REV10_PBGA:
+ case SPR_8347_REV11_PBGA:
+ puts("MPC8347, ");
+ break;
+ case SPR_8343E_REV10:
+ case SPR_8343E_REV11:
+ puts("MPC8343E, ");
+ break;
+ case SPR_8343_REV10:
+ case SPR_8343_REV11:
+ puts("MPC8343, ");
+ break;
+ case SPR_8360E_REV10:
+ case SPR_8360E_REV11:
+ case SPR_8360E_REV12:
+ puts("MPC8360E, ");
+ break;
+ case SPR_8360_REV10:
+ case SPR_8360_REV11:
+ case SPR_8360_REV12:
+ puts("MPC8360, ");
break;
default:
puts("Rev: Unknown\n");
return -1; /* Not sure what this is */
}
- printf("Rev: %d.%d at %s MHz\n", (pvr & 0xf0) >> 4,
- (pvr & 0x0f), strmhz(buf, clock));
+#if defined(CONFIG_MPC8349)
+ printf("Rev: %02x at %s MHz\n", (spridr & 0x0000FFFF)>>4 |(spridr & 0x0000000F), strmhz(buf, clock));
+#else
+ printf("Rev: %02x at %s MHz\n", spridr & 0x0000FFFF, strmhz(buf, clock));
+#endif
return 0;
}
diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c
index 3dfde8a..acc8c9e 100644
--- a/cpu/mpc83xx/spd_sdram.c
+++ b/cpu/mpc83xx/spd_sdram.c
@@ -4,7 +4,7 @@
* (C) Copyright 2006
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * Copyright 2004 Freescale Semiconductor.
+ * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
* (C) Copyright 2003 Motorola Inc.
* Xianghua Xiao (X.Xiao@motorola.com)
*
@@ -112,14 +112,10 @@
long int spd_sdram()
{
-#ifdef CONFIG_MPC834X
- int caslat_83xx; /* For Errata DDR6 */
-#endif
volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
volatile ddr83xx_t *ddr = &immap->ddr;
volatile law83xx_t *ecm = &immap->sysconf.ddrlaw[0];
spd_eeprom_t spd;
- unsigned int tmp, tmp1;
unsigned int memsize;
unsigned int law_size;
unsigned char caslat, caslat_ctrl;
@@ -131,28 +127,7 @@
unsigned sdram_cfg;
unsigned int ddrc_ecc_enable;
-
/* Read SPD parameters with I2C */
-#ifdef CFG_83XX_DDR_USES_CS0
- ddr->csbnds[0].csbnds = (banksize(spd.row_dens) >> 24) - 1;
- ddr->cs_config[0] = ( 1 << 31
- | (spd.nrow_addr - 12) << 8
- | (spd.ncol_addr - 8) );
- debug("\n");
- debug("cs0_bnds = 0x%08x\n",ddr->csbnds[0].csbnds);
- debug("cs0_config = 0x%08x\n",ddr->cs_config[0]);
-
- if (spd.nrows == 2) {
- ddr->csbnds[1].csbnds = ( (banksize(spd.row_dens) >> 8)
- | ((banksize(spd.row_dens) >> 23) - 1) );
- ddr->cs_config[1] = ( 1<<31
- | (spd.nrow_addr-12) << 8
- | (spd.ncol_addr-8) );
- debug("cs1_bnds = 0x%08x\n",ddr->csbnds[1].csbnds);
- debug("cs1_config = 0x%08x\n",ddr->cs_config[1]);
- }
-
-#else
CFG_READ_SPD(SPD_EEPROM_ADDRESS, 0, 1, (uchar *) & spd, sizeof (spd));
#ifdef SPD_DEBUG
spd_debug(&spd);
@@ -183,6 +158,26 @@
return 0;
}
/* Setup DDR chip select register */
+#ifdef CFG_83XX_DDR_USES_CS0
+ ddr->csbnds[0].csbnds = (banksize(spd.row_dens) >> 24) - 1;
+ ddr->cs_config[0] = ( 1 << 31
+ | (spd.nrow_addr - 12) << 8
+ | (spd.ncol_addr - 8) );
+ debug("\n");
+ debug("cs0_bnds = 0x%08x\n",ddr->csbnds[0].csbnds);
+ debug("cs0_config = 0x%08x\n",ddr->cs_config[0]);
+
+ if (spd.nrows == 2) {
+ ddr->csbnds[1].csbnds = ( (banksize(spd.row_dens) >> 8)
+ | ((banksize(spd.row_dens) >> 23) - 1) );
+ ddr->cs_config[1] = ( 1<<31
+ | (spd.nrow_addr-12) << 8
+ | (spd.ncol_addr-8) );
+ debug("cs1_bnds = 0x%08x\n",ddr->csbnds[1].csbnds);
+ debug("cs1_config = 0x%08x\n",ddr->cs_config[1]);
+ }
+
+#else
ddr->csbnds[2].csbnds = (banksize(spd.row_dens) >> 24) - 1;
ddr->cs_config[2] = ( 1 << 31
| (spd.nrow_addr - 12) << 8
@@ -243,8 +238,9 @@
*/
caslat = __ilog2(spd.cas_lat);
- if (caslat > 4 ) {
- printf("DDR: Invalid SPD CAS Latency, caslat=%02X\n", caslat);
+ if (caslat > 6 ) {
+ printf("DDR: Invalid SPD CAS Latency, caslat=%02X\n",
+ spd.cas_lat);
return 0;
}
max_bus_clk = 1000 *10 / (((spd.clk_cycle & 0xF0) >> 4) * 10
@@ -256,89 +252,110 @@
ddrc_clk = get_ddr_clk(0) / 1000000;
if (max_data_rate >= 390) { /* it is DDR 400 */
- printf("DDR: platform not support DDR 400\n");
- return 0;
+ if (ddrc_clk <= 410 && ddrc_clk > 350) {
+ /* DDR controller clk at 350~410 */
+ effective_data_rate = 400; /* 5ns */
+ caslat = caslat;
+ } else if (ddrc_clk <= 350 && ddrc_clk > 280) {
+ /* DDR controller clk at 280~350 */
+ effective_data_rate = 333; /* 6ns */
+ if (spd.clk_cycle2 == 0x60) {
+ caslat = caslat - 1;
+ } else {
+ caslat = caslat;
+ }
+ } else if (ddrc_clk <= 280 && ddrc_clk > 230) {
+ /* DDR controller clk at 230~280 */
+ effective_data_rate = 266; /* 7.5ns */
+ if (spd.clk_cycle3 == 0x75) {
+ caslat = caslat - 2;
+ } else if (spd.clk_cycle2 == 0x60) {
+ caslat = caslat - 1;
+ } else {
+ caslat = caslat;
+ }
+ } else if (ddrc_clk <= 230 && ddrc_clk > 90) {
+ /* DDR controller clk at 90~230 */
+ effective_data_rate = 200; /* 10ns */
+ if (spd.clk_cycle3 == 0x75) {
+ caslat = caslat - 2;
+ } else if (spd.clk_cycle2 == 0x60) {
+ caslat = caslat - 1;
+ } else {
+ caslat = caslat;
+ }
+ }
} else if (max_data_rate >= 323) { /* it is DDR 333 */
if (ddrc_clk <= 350 && ddrc_clk > 280) {
- /* DDRC clk at 280~350 */
+ /* DDR controller clk at 280~350 */
effective_data_rate = 333; /* 6ns */
caslat = caslat;
} else if (ddrc_clk <= 280 && ddrc_clk > 230) {
- /* DDRC clk at 230~280 */
+ /* DDR controller clk at 230~280 */
+ effective_data_rate = 266; /* 7.5ns */
if (spd.clk_cycle2 == 0x75) {
- effective_data_rate = 266; /* 7.5ns */
caslat = caslat - 1;
+ } else {
+ caslat = caslat;
}
} else if (ddrc_clk <= 230 && ddrc_clk > 90) {
- /* DDRC clk at 90~230 */
+ /* DDR controller clk at 90~230 */
+ effective_data_rate = 200; /* 10ns */
if (spd.clk_cycle3 == 0xa0) {
- effective_data_rate = 200; /* 10ns */
caslat = caslat - 2;
+ } else if (spd.clk_cycle2 == 0x75) {
+ caslat = caslat - 1;
+ } else {
+ caslat = caslat;
}
}
} else if (max_data_rate >= 256) { /* it is DDR 266 */
if (ddrc_clk <= 350 && ddrc_clk > 280) {
- /* DDRC clk at 280~350 */
+ /* DDR controller clk at 280~350 */
printf("DDR: DDR controller freq is more than "
"max data rate of the module\n");
return 0;
} else if (ddrc_clk <= 280 && ddrc_clk > 230) {
- /* DDRC clk at 230~280 */
+ /* DDR controller clk at 230~280 */
effective_data_rate = 266; /* 7.5ns */
caslat = caslat;
} else if (ddrc_clk <= 230 && ddrc_clk > 90) {
- /* DDRC clk at 90~230 */
+ /* DDR controller clk at 90~230 */
+ effective_data_rate = 200; /* 10ns */
if (spd.clk_cycle2 == 0xa0) {
- effective_data_rate = 200; /* 10ns */
caslat = caslat - 1;
}
}
} else if (max_data_rate >= 190) { /* it is DDR 200 */
if (ddrc_clk <= 350 && ddrc_clk > 230) {
- /* DDRC clk at 230~350 */
+ /* DDR controller clk at 230~350 */
printf("DDR: DDR controller freq is more than "
"max data rate of the module\n");
return 0;
} else if (ddrc_clk <= 230 && ddrc_clk > 90) {
- /* DDRC clk at 90~230 */
+ /* DDR controller clk at 90~230 */
effective_data_rate = 200; /* 10ns */
caslat = caslat;
}
}
-#ifdef CONFIG_MPC834X
-/* Errata DDR6
- This errata affects all MPC8349E, MPC8343E and MPC8347E processors.
-*/
- if ((tmp1 >= 280) && (tmp1 < 350)) /* CSB=333 */
- {
- if (spd.mid[0] == 0x2c) {
- /* Micron memory running at 333 MHz */
- /* Chances are, U-Boot will crash before we get here,
- but just in case, display a message and return error. */
- printf("Micron DDR not supported at 333MHz CSB\n");
- return 0;
- } else if (spd.mid[0] == 0xad) {
- printf("Hynix DDR does not require Errata DDR6\n");
- } else {
- /* enable 2 cycle Earlier for CL=2.5 or 3 */
- ddr->debug_reg = 0x202c0000;
- printf("Errata DDR6 (debug_reg=0x%x)\n", ddr->debug_reg);
- }
- caslat_83xx = caslat;
- }
+ debug("DDR:Effective data rate is: %dMhz\n", effective_data_rate);
+ debug("DDR:The MSB 1 of CAS Latency is: %d\n", caslat);
- if ((tmp1 >= 230) && (tmp1 < 280)) { /* CSB=266 */
- if (spd.mid[0] != 0x2c) /* non-Micron */
- caslat_83xx = caslat - 1;
-
+ /*
+ * Errata DDR6 work around: input enable 2 cycles earlier.
+ * including MPC834x Rev1.0/1.1 and MPC8360 Rev1.1/1.2.
+ */
+ if (caslat == 2) {
+ ddr->debug_reg = 0x201c0000; /* CL=2 */
+ } else if (caslat == 3) {
+ ddr->debug_reg = 0x202c0000; /* CL=2.5 */
+ } else if (caslat == 4) {
+ ddr->debug_reg = 0x202c0000; /* CL=3.0 */
}
+ __asm__ __volatile__ ("sync");
- if ((tmp1 >= 90) && (tmp1 < 230)) { /* CSB=200 */
- caslat = 3;
- caslat_83xx = 2;
- }
-#endif
+ debug("Errata DDR6 (debug_reg=0x%08x)\n", ddr->debug_reg);
/*
* note: caslat must also be programmed into ddr->sdram_mode
@@ -353,11 +370,7 @@
(((picos_to_clk(spd.trp * 250) & 0x07) << 28 ) |
((picos_to_clk(spd.tras * 1000) & 0x0f ) << 24 ) |
((picos_to_clk(spd.trcd * 250) & 0x07) << 20 ) |
-#ifdef CONFIG_MPC834x
- ((caslat_83xx & 0x07) << 16 ) |
-#else
((caslat_ctrl & 0x07) << 16 ) |
-#endif
(((picos_to_clk(spd.trfc * 1000) - 8) & 0x0f) << 12 ) |
( 0x300 ) |
((picos_to_clk(spd.trrd * 250) & 0x07) << 4) | 1);
@@ -370,13 +383,10 @@
ddr->sdram_cfg = 0x42000000;
/* Check DIMM data bus width */
- if (spd.dataw_lsb == 0x20)
- {
+ if (spd.dataw_lsb == 0x20) {
burstlen = 0x03; /* 32 bit data bus, burst len is 8 */
printf("\n DDR DIMM: data bus width is 32 bit");
- }
- else
- {
+ } else {
burstlen = 0x02; /* Others act as 64 bit bus, burst len is 4 */
printf("\n DDR DIMM: data bus width is 64 bit");
}
@@ -384,68 +394,67 @@
/* Is this an ECC DDR chip? */
if (spd.config == 0x02) {
printf(" with ECC\n");
- }
- else
+ } else {
printf(" without ECC\n");
+ }
/* Burst length is always 4 for 64 bit data bus, 8 for 32 bit data bus,
Burst type is sequential
*/
- switch(caslat) {
- case 1:
- ddr->sdram_mode = 0x50 | burstlen; /* CL=1.5 */
- break;
- case 2:
- ddr->sdram_mode = 0x20 | burstlen; /* CL=2.0 */
- break;
- case 3:
- ddr->sdram_mode = 0x60 | burstlen; /* CL=2.5 */
- break;
- case 4:
- ddr->sdram_mode = 0x30 | burstlen; /* CL=3.0 */
- break;
- default:
- printf("DDR:only CAS Latency 1.5, 2.0, 2.5, 3.0 "
- "is supported.\n");
- return 0;
+ switch (caslat) {
+ case 1:
+ ddr->sdram_mode = 0x50 | burstlen; /* CL=1.5 */
+ break;
+ case 2:
+ ddr->sdram_mode = 0x20 | burstlen; /* CL=2.0 */
+ break;
+ case 3:
+ ddr->sdram_mode = 0x60 | burstlen; /* CL=2.5 */
+ break;
+ case 4:
+ ddr->sdram_mode = 0x30 | burstlen; /* CL=3.0 */
+ break;
+ default:
+ printf("DDR:only CL 1.5, 2.0, 2.5, 3.0 is supported\n");
+ return 0;
}
debug("DDR:sdram_mode=0x%08x\n", ddr->sdram_mode);
- switch(spd.refresh) {
- case 0x00:
- case 0x80:
- tmp = picos_to_clk(15625000);
- break;
- case 0x01:
- case 0x81:
- tmp = picos_to_clk(3900000);
- break;
- case 0x02:
- case 0x82:
- tmp = picos_to_clk(7800000);
- break;
- case 0x03:
- case 0x83:
- tmp = picos_to_clk(31300000);
- break;
- case 0x04:
- case 0x84:
- tmp = picos_to_clk(62500000);
- break;
- case 0x05:
- case 0x85:
- tmp = picos_to_clk(125000000);
- break;
- default:
- tmp = 0x512;
- break;
+ switch (spd.refresh) {
+ case 0x00:
+ case 0x80:
+ refresh_clk = picos_to_clk(15625000);
+ break;
+ case 0x01:
+ case 0x81:
+ refresh_clk = picos_to_clk(3900000);
+ break;
+ case 0x02:
+ case 0x82:
+ refresh_clk = picos_to_clk(7800000);
+ break;
+ case 0x03:
+ case 0x83:
+ refresh_clk = picos_to_clk(31300000);
+ break;
+ case 0x04:
+ case 0x84:
+ refresh_clk = picos_to_clk(62500000);
+ break;
+ case 0x05:
+ case 0x85:
+ refresh_clk = picos_to_clk(125000000);
+ break;
+ default:
+ refresh_clk = 0x512;
+ break;
}
/*
* Set BSTOPRE to 0x100 for page mode
* If auto-charge is used, set BSTOPRE = 0
*/
- ddr->sdram_interval = ((tmp & 0x3fff) << 16) | 0x100;
+ ddr->sdram_interval = ((refresh_clk & 0x3fff) << 16) | 0x100;
debug("DDR:sdram_interval=0x%08x\n", ddr->sdram_interval);
/* SS_EN = 0, source synchronous disable
@@ -459,8 +468,8 @@
udelay(600);
/*
- * Figure out the settings for the sdram_cfg register. Build up
- * the entire register in 'tmp' before writing since the write into
+ * Figure out the settings for the sdram_cfg register. Build up
+ * the value in 'sdram_cfg' before writing since the write into
* the register will actually enable the memory controller, and all
* settings must be done before enabling.
*
@@ -493,13 +502,13 @@
/* set single bit error threshold to maximum value,
* reset counter to zero */
ddr->err_sbe = (255 << ECC_ERROR_MAN_SBET_SHIFT) |
- (0 << ECC_ERROR_MAN_SBEC_SHIFT);
+ (0 << ECC_ERROR_MAN_SBEC_SHIFT);
}
debug("DDR:err_disable=0x%08x\n", ddr->err_disable);
debug("DDR:err_sbe=0x%08x\n", ddr->err_sbe);
#endif
- printf(" DDRC ECC mode: %s", ddrc_ecc_enable ? "ON":"OFF");
+ printf(" DDRC ECC mode: %s\n", ddrc_ecc_enable ? "ON":"OFF");
#if defined(CONFIG_DDR_2T_TIMING)
/*
@@ -517,7 +526,6 @@
}
#endif /* CONFIG_SPD_EEPROM */
-
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
/*
* Use timebase counter, get_timer() is not availabe
@@ -602,26 +610,16 @@
}
}
- /* 8K */
- dma_xfer((uint *)0x2000, 0x2000, (uint *)0);
- /* 16K */
- dma_xfer((uint *)0x4000, 0x4000, (uint *)0);
- /* 32K */
- dma_xfer((uint *)0x8000, 0x8000, (uint *)0);
- /* 64K */
- dma_xfer((uint *)0x10000, 0x10000, (uint *)0);
- /* 128k */
- dma_xfer((uint *)0x20000, 0x20000, (uint *)0);
- /* 256k */
- dma_xfer((uint *)0x40000, 0x40000, (uint *)0);
- /* 512k */
- dma_xfer((uint *)0x80000, 0x80000, (uint *)0);
- /* 1M */
- dma_xfer((uint *)0x100000, 0x100000, (uint *)0);
- /* 2M */
- dma_xfer((uint *)0x200000, 0x200000, (uint *)0);
- /* 4M */
- dma_xfer((uint *)0x400000, 0x400000, (uint *)0);
+ dma_xfer((uint *)0x2000, 0x2000, (uint *)0); /* 8K */
+ dma_xfer((uint *)0x4000, 0x4000, (uint *)0); /* 16K */
+ dma_xfer((uint *)0x8000, 0x8000, (uint *)0); /* 32K */
+ dma_xfer((uint *)0x10000, 0x10000, (uint *)0); /* 64K */
+ dma_xfer((uint *)0x20000, 0x20000, (uint *)0); /* 128K */
+ dma_xfer((uint *)0x40000, 0x40000, (uint *)0); /* 256K */
+ dma_xfer((uint *)0x80000, 0x80000, (uint *)0); /* 512K */
+ dma_xfer((uint *)0x100000, 0x100000, (uint *)0); /* 1M */
+ dma_xfer((uint *)0x200000, 0x200000, (uint *)0); /* 2M */
+ dma_xfer((uint *)0x400000, 0x400000, (uint *)0); /* 4M */
for (i = 1; i < dram_size / 0x800000; i++) {
dma_xfer((uint *)(0x800000*i), 0x800000, (uint *)0);
diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c
index 412713f..31fcadd 100644
--- a/cpu/mpc83xx/speed.c
+++ b/cpu/mpc83xx/speed.c
@@ -2,7 +2,7 @@
* (C) Copyright 2000-2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * Copyright 2004 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -104,79 +104,52 @@
u32 lcrr;
u32 csb_clk;
+#if defined(CONFIG_MPC8349)
u32 tsec1_clk;
u32 tsec2_clk;
- u32 core_clk;
u32 usbmph_clk;
u32 usbdr_clk;
- u32 i2c_clk;
+#endif
+ u32 core_clk;
+ u32 i2c1_clk;
+ u32 i2c2_clk;
u32 enc_clk;
u32 lbiu_clk;
u32 lclk_clk;
u32 ddr_clk;
+#if defined (CONFIG_MPC8360)
+ u32 qepmf;
+ u32 qepdf;
+ u32 ddr_sec_clk;
+ u32 qe_clk;
+ u32 brg_clk;
+#endif
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
return -1;
-#ifndef CFG_HRCW_HIGH
-# error "CFG_HRCW_HIGH must be defined in board config file"
-#endif /* CFG_HCWD_HIGH */
-
-#if (CFG_HRCW_HIGH & HRCWH_PCI_HOST)
-
-# ifndef CONFIG_83XX_CLKIN
-# error "In PCI Host Mode, CONFIG_83XX_CLKIN must be defined in board config file"
-# endif /* CONFIG_83XX_CLKIN */
-# ifdef CONFIG_83XX_PCICLK
-# warning "In PCI Host Mode, CONFIG_83XX_PCICLK in board config file is igonred"
-# endif /* CONFIG_83XX_PCICLK */
-
- /* PCI Host Mode */
- if (!(im->reset.rcwh & RCWH_PCIHOST)) {
- /* though RCWH_PCIHOST is defined in CFG_HRCW_HIGH
- * the im->reset.rcwhr PCI Host Mode is disabled
- * FIXME: findout if there is a way to issue some warning */
- return -2;
- }
- if (im->clk.spmr & SPMR_CKID) {
- /* PCI Clock is half CONFIG_83XX_CLKIN */
- pci_sync_in = CONFIG_83XX_CLKIN / 2;
- }
- else {
- pci_sync_in = CONFIG_83XX_CLKIN;
- }
-
-#else /* (CFG_HRCW_HIGH & HRCWH_PCI_HOST) */
-
-# ifdef CONFIG_83XX_CLKIN
-# warning "In PCI Agent Mode, CONFIG_83XX_CLKIN in board config file is igonred"
-# endif /* CONFIG_83XX_CLKIN */
-# ifndef CONFIG_83XX_PCICLK
-# error "In PCI Agent Mode, CONFIG_83XX_PCICLK must be defined in board config file"
-# endif /* CONFIG_83XX_PCICLK */
-
- /* PCI Agent Mode */
- if (im->reset.rcwh & RCWH_PCIHOST) {
- /* though RCWH_PCIHOST is not defined in CFG_HRCW_HIGH
- * the im->reset.rcwhr PCI Host Mode is enabled */
- return -3;
- }
- pci_sync_in = CONFIG_83XX_PCICLK;
-
-#endif /* (CFG_HRCW_HIGH | RCWH_PCIHOST) */
-
- /* we have up to date pci_sync_in */
- spmf = ((im->reset.rcwl & RCWL_SPMF) >> RCWL_SPMF_SHIFT);
clkin_div = ((im->clk.spmr & SPMR_CKID) >> SPMR_CKID_SHIFT);
- if ((im->reset.rcwl & RCWL_LBIUCM) || (im->reset.rcwl & RCWL_DDRCM)) {
- csb_clk = (pci_sync_in * spmf * (1 + clkin_div)) / 2;
- }
- else {
- csb_clk = pci_sync_in * spmf * (1 + clkin_div);
+ if (im->reset.rcwh & HRCWH_PCI_HOST) {
+#if defined(CONFIG_83XX_CLKIN)
+ pci_sync_in = CONFIG_83XX_CLKIN / (1 + clkin_div);
+#else
+ pci_sync_in = 0xDEADBEEF;
+#endif
+ } else {
+#if defined(CONFIG_83XX_PCICLK)
+ pci_sync_in = CONFIG_83XX_PCICLK;
+#else
+ pci_sync_in = 0xDEADBEEF;
+#endif
}
+ spmf = ((im->reset.rcwl & RCWL_SPMF) >> RCWL_SPMF_SHIFT);
+ csb_clk = pci_sync_in * (1 + clkin_div) * spmf;
+
sccr = im->clk.sccr;
+
+#if defined(CONFIG_MPC8349)
switch ((sccr & SCCR_TSEC1CM) >> SCCR_TSEC1CM_SHIFT) {
case 0:
tsec1_clk = 0;
@@ -212,25 +185,8 @@
/* unkown SCCR_TSEC2CM value */
return -5;
}
- i2c_clk = tsec2_clk;
- switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) {
- case 0:
- enc_clk = 0;
- break;
- case 1:
- enc_clk = csb_clk;
- break;
- case 2:
- enc_clk = csb_clk / 2;
- break;
- case 3:
- enc_clk = csb_clk / 3;
- break;
- default:
- /* unkown SCCR_ENCCM value */
- return -6;
- }
+ i2c1_clk = tsec2_clk;
switch ((sccr & SCCR_USBMPHCM) >> SCCR_USBMPHCM_SHIFT) {
case 0:
@@ -274,8 +230,34 @@
/* if USB MPH clock is not disabled and USB DR clock is not disabled than USB MPH & USB DR must have the same rate */
return -9;
}
+#endif
+#if defined (CONFIG_MPC8360)
+ i2c1_clk = csb_clk;
+#endif
+ i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */
+ switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) {
+ case 0:
+ enc_clk = 0;
+ break;
+ case 1:
+ enc_clk = csb_clk;
+ break;
+ case 2:
+ enc_clk = csb_clk / 2;
+ break;
+ case 3:
+ enc_clk = csb_clk / 3;
+ break;
+ default:
+ /* unkown SCCR_ENCCM value */
+ return -6;
+ }
+#if defined(CONFIG_MPC8349) || defined(CONFIG_MPC8360)
lbiu_clk = csb_clk * (1 + ((im->reset.rcwl & RCWL_LBIUCM) >> RCWL_LBIUCM_SHIFT));
+#else
+#error Unknown MPC83xx chip
+#endif
lcrr = (im->lbus.lcrr & LCRR_CLKDIV) >> LCRR_CLKDIV_SHIFT;
switch (lcrr) {
case 2:
@@ -287,10 +269,16 @@
/* unknown lcrr */
return -10;
}
-
+#if defined(CONFIG_MPC8349) || defined(CONFIG_MPC8360)
ddr_clk = csb_clk * (1 + ((im->reset.rcwl & RCWL_DDRCM) >> RCWL_DDRCM_SHIFT));
-
corepll = (im->reset.rcwl & RCWL_COREPLL) >> RCWL_COREPLL_SHIFT;
+#if defined (CONFIG_MPC8360)
+ ddr_sec_clk = csb_clk * (1 + ((im->reset.rcwl & RCWL_LBIUCM) >> RCWL_LBIUCM_SHIFT));
+#endif
+#else
+#error Unknown MPC83xx chip
+#endif
+
corecnf_tab_index = ((corepll & 0x1F) << 2) | ((corepll & 0x60) >> 5);
if (corecnf_tab_index > (sizeof(corecnf_tab)/sizeof(corecnf_t)) ) {
/* corecnf_tab_index is too high, possibly worng value */
@@ -319,22 +307,36 @@
return -12;
}
- gd->csb_clk = csb_clk ;
- gd->tsec1_clk = tsec1_clk ;
- gd->tsec2_clk = tsec2_clk ;
- gd->core_clk = core_clk ;
- gd->usbmph_clk = usbmph_clk;
- gd->usbdr_clk = usbdr_clk ;
- gd->i2c_clk = i2c_clk ;
- gd->enc_clk = enc_clk ;
- gd->lbiu_clk = lbiu_clk ;
- gd->lclk_clk = lclk_clk ;
- gd->ddr_clk = ddr_clk ;
- gd->pci_clk = pci_sync_in;
+#if defined (CONFIG_MPC8360)
+ qepmf = (im->reset.rcwl & RCWL_CEPMF) >> RCWL_CEPMF_SHIFT;
+ qepdf = (im->reset.rcwl & RCWL_CEPDF) >> RCWL_CEPDF_SHIFT;
+ qe_clk = (pci_sync_in * qepmf)/(1+qepdf);
+ brg_clk = qe_clk / 2;
+#endif
- gd->cpu_clk = gd->core_clk;
- gd->bus_clk = gd->lbiu_clk;
+ gd->csb_clk = csb_clk;
+#if defined(CONFIG_MPC8349)
+ gd->tsec1_clk = tsec1_clk;
+ gd->tsec2_clk = tsec2_clk;
+ gd->usbmph_clk = usbmph_clk;
+ gd->usbdr_clk = usbdr_clk;
+#endif
+ gd->core_clk = core_clk;
+ gd->i2c1_clk = i2c1_clk;
+ gd->i2c2_clk = i2c2_clk;
+ gd->enc_clk = enc_clk;
+ gd->lbiu_clk = lbiu_clk;
+ gd->lclk_clk = lclk_clk;
+ gd->ddr_clk = ddr_clk;
+#if defined (CONFIG_MPC8360)
+ gd->ddr_sec_clk = ddr_sec_clk;
+ gd->qe_clk = qe_clk;
+ gd->brg_clk = brg_clk;
+#endif
+ gd->cpu_clk = gd->core_clk;
+ gd->bus_clk = gd->csb_clk;
return 0;
+
}
ulong get_ddr_clk(ulong dummy)
@@ -357,14 +359,23 @@
printf("Clock configuration:\n");
printf(" Coherent System Bus: %4d MHz\n",gd->csb_clk/1000000);
printf(" Core: %4d MHz\n",gd->core_clk/1000000);
- debug(" Local Bus Controller:%4d MHz\n",gd->lbiu_clk/1000000);
+#if defined (CONFIG_MPC8360)
+ printf(" QE: %4d MHz\n",gd->qe_clk/1000000);
+#endif
+ printf(" Local Bus Controller:%4d MHz\n",gd->lbiu_clk/1000000);
printf(" Local Bus: %4d MHz\n",gd->lclk_clk/1000000);
- debug(" DDR: %4d MHz\n",gd->ddr_clk/1000000);
- debug(" I2C: %4d MHz\n",gd->i2c_clk/1000000);
- debug(" TSEC1: %4d MHz\n",gd->tsec1_clk/1000000);
- debug(" TSEC2: %4d MHz\n",gd->tsec2_clk/1000000);
- debug(" USB MPH: %4d MHz\n",gd->usbmph_clk/1000000);
- debug(" USB DR: %4d MHz\n",gd->usbdr_clk/1000000);
-
+ printf(" DDR: %4d MHz\n",gd->ddr_clk/1000000);
+#if defined (CONFIG_MPC8360)
+ printf(" DDR Secondary: %4d MHz\n",gd->ddr_sec_clk/1000000);
+#endif
+ printf(" SEC: %4d MHz\n",gd->enc_clk/1000000);
+ printf(" I2C1: %4d MHz\n",gd->i2c1_clk/1000000);
+ printf(" I2C2: %4d MHz\n",gd->i2c2_clk/1000000);
+#if defined(CONFIG_MPC8349)
+ printf(" TSEC1: %4d MHz\n",gd->tsec1_clk/1000000);
+ printf(" TSEC2: %4d MHz\n",gd->tsec2_clk/1000000);
+ printf(" USB MPH: %4d MHz\n",gd->usbmph_clk/1000000);
+ printf(" USB DR: %4d MHz\n",gd->usbdr_clk/1000000);
+#endif
return 0;
}
diff --git a/include/asm-ppc/e300.h b/include/asm-ppc/e300.h
index 908007c..79dcae4 100644
--- a/include/asm-ppc/e300.h
+++ b/include/asm-ppc/e300.h
@@ -12,6 +12,8 @@
#define PVR_83xx 0x80830000
#define PVR_8349_REV10 (PVR_83xx | 0x0010)
#define PVR_8349_REV11 (PVR_83xx | 0x0011)
+#define PVR_8360_REV10 (PVR_83xx | 0x0020)
+#define PVR_8360_REV11 (PVR_83xx | 0x0020)
/*
* Hardware Implementation-Dependent Register 0 (HID0)
diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h
index b73af96..418315b 100644
--- a/include/asm-ppc/global_data.h
+++ b/include/asm-ppc/global_data.h
@@ -52,17 +52,27 @@
#if defined(CONFIG_MPC83XX)
/* There are other clocks in the MPC83XX */
u32 csb_clk;
+#if defined (CONFIG_MPC8349)
u32 tsec1_clk;
u32 tsec2_clk;
- u32 core_clk;
u32 usbmph_clk;
u32 usbdr_clk;
- u32 i2c_clk;
+#endif /* CONFIG_MPC8349 */
+ u32 core_clk;
+ u32 i2c1_clk;
+ u32 i2c2_clk;
u32 enc_clk;
u32 lbiu_clk;
u32 lclk_clk;
u32 ddr_clk;
u32 pci_clk;
+#if defined(CONFIG_QE)
+ u32 qe_clk;
+ u32 brg_clk;
+#endif /* CONFIG_QE */
+#if defined (CONFIG_MPC8360)
+ u32 ddr_sec_clk;
+#endif /* CONFIG_MPC8360 */
#endif
#if defined(CONFIG_MPC5xxx)
unsigned long ipb_clk;
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
new file mode 100644
index 0000000..0ae6061
--- /dev/null
+++ b/include/configs/MPC8360EMDS.h
@@ -0,0 +1,585 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ *
+ * Dave Liu <daveliu@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#undef DEBUG
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300 1 /* E300 family */
+#define CONFIG_QE 1 /* Has QE */
+#define CONFIG_MPC83XX 1 /* MPC83XX family */
+#define CONFIG_MPC8360 1 /* MPC8360 CPU specific */
+#define CONFIG_MPC8360EMDS 1 /* MPC8360EMDS board specific */
+
+/*
+ * System Clock Setup
+ */
+#ifdef CONFIG_PCISLAVE
+#define CONFIG_83XX_PCICLK 66000000 /* in HZ */
+#else
+#define CONFIG_83XX_CLKIN 66000000 /* in Hz */
+#endif
+
+#ifndef CONFIG_SYS_CLK_FREQ
+#define CONFIG_SYS_CLK_FREQ 66000000
+#endif
+
+/*
+ * Hardware Reset Configuration Word
+ */
+#define CFG_HRCW_LOW (\
+ HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+ HRCWL_DDR_TO_SCB_CLK_1X1 |\
+ HRCWL_CSB_TO_CLKIN_4X1 |\
+ HRCWL_VCO_1X2 |\
+ HRCWL_CE_PLL_VCO_DIV_4 |\
+ HRCWL_CE_PLL_DIV_1X1 |\
+ HRCWL_CE_TO_PLL_1X6 |\
+ HRCWL_CORE_TO_CSB_2X1)
+
+#ifdef CONFIG_PCISLAVE
+#define CFG_HRCW_HIGH (\
+ HRCWH_PCI_AGENT |\
+ HRCWH_PCI1_ARBITER_DISABLE |\
+ HRCWH_PCICKDRV_DISABLE |\
+ HRCWH_CORE_ENABLE |\
+ HRCWH_FROM_0XFFF00100 |\
+ HRCWH_BOOTSEQ_DISABLE |\
+ HRCWH_SW_WATCHDOG_DISABLE |\
+ HRCWH_ROM_LOC_LOCAL_16BIT)
+#else
+#define CFG_HRCW_HIGH (\
+ HRCWH_PCI_HOST |\
+ HRCWH_PCI1_ARBITER_ENABLE |\
+ HRCWH_PCICKDRV_ENABLE |\
+ HRCWH_CORE_ENABLE |\
+ HRCWH_FROM_0X00000100 |\
+ HRCWH_BOOTSEQ_DISABLE |\
+ HRCWH_SW_WATCHDOG_DISABLE |\
+ HRCWH_ROM_LOC_LOCAL_16BIT)
+#endif
+
+/*
+ * System IO Config
+ */
+#define CFG_SICRH 0x00000000
+#define CFG_SICRL 0x40000000
+
+#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
+
+/*
+ * IMMR new address
+ */
+#define CFG_IMMRBAR 0xE0000000
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_BASE 0x00000000 /* DDR is system memory */
+#define CFG_SDRAM_BASE CFG_DDR_BASE
+#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE
+
+#undef CONFIG_DDR_ECC /* only for ECC DDR module */
+#define CONFIG_DDR_ECC_CMD /* Use DDR ECC user commands */
+
+#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
+#if defined(CONFIG_SPD_EEPROM)
+/*
+ * Determine DDR configuration from I2C interface.
+ */
+#define SPD_EEPROM_ADDRESS 0x52 /* DDR SODIMM */
+#else
+/*
+ * Manually set up DDR parameters
+ */
+#define CFG_DDR_SIZE 256 /* MB */
+#define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_9)
+#define CFG_DDR_TIMING_1 0x37344321 /* tCL-tRCD-tRP-tRAS=2.5-3-3-7 */
+#define CFG_DDR_TIMING_2 0x00000800 /* may need tuning */
+#define CFG_DDR_CONTROL 0x42008000 /* Self refresh,2T timing */
+#define CFG_DDR_MODE 0x20000162 /* DLL,normal,seq,4/2.5 */
+#define CFG_DDR_INTERVAL 0x045b0100 /* page mode */
+#endif
+
+/*
+ * Memory test
+ */
+#undef CFG_DRAM_TEST /* memory test, takes time */
+#define CFG_MEMTEST_START 0x00000000 /* memtest region */
+#define CFG_MEMTEST_END 0x00100000
+
+/*
+ * The reserved memory
+ */
+
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef CFG_RAMBOOT
+#endif
+
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
+
+/*
+ * Initial RAM Base Address Setup
+ */
+#define CFG_INIT_RAM_LOCK 1
+#define CFG_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */
+#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+
+/*
+ * Local Bus Configuration & Clock Setup
+ */
+#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_4)
+#define CFG_LBC_LBCR 0x00000000
+
+/*
+ * FLASH on the Local Bus
+ */
+#define CFG_FLASH_CFI /* use the Common Flash Interface */
+#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */
+#define CFG_FLASH_BASE 0xFE000000 /* FLASH base address */
+#define CFG_FLASH_SIZE 16 /* FLASH size is 16M */
+
+#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */
+#define CFG_LBLAWAR0_PRELIM 0x80000018 /* 32MB window size */
+
+#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* Flash Base address */ \
+ (2 << BR_PS_SHIFT) | /* 16 bit port size */ \
+ BR_V) /* valid */
+#define CFG_OR0_PRELIM 0xfe006ff7 /* 16MB Flash size */
+
+#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
+#define CFG_MAX_FLASH_SECT 128 /* sectors per device */
+
+#undef CFG_FLASH_CHECKSUM
+
+/*
+ * BCSR on the Local Bus
+ */
+#define CFG_BCSR 0xF8000000
+#define CFG_LBLAWBAR1_PRELIM CFG_BCSR /* Access window base at BCSR base */
+#define CFG_LBLAWAR1_PRELIM 0x8000000E /* Access window size 32K */
+
+#define CFG_BR1_PRELIM (CFG_BCSR|0x00000801) /* Port size=8bit, MSEL=GPCM */
+#define CFG_OR1_PRELIM 0xFFFFE9f7 /* length 32K */
+
+/*
+ * SDRAM on the Local Bus
+ */
+#define CFG_LBC_SDRAM_BASE 0xF0000000 /* SDRAM base address */
+#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
+
+#define CFG_LB_SDRAM /* if board has SRDAM on local bus */
+
+#ifdef CFG_LB_SDRAM
+#define CFG_LBLAWBAR2_PRELIM CFG_LBC_SDRAM_BASE
+#define CFG_LBLAWAR2_PRELIM 0x80000019 /* 64MB */
+
+/*local bus BR2, OR2 definition for SDRAM if soldered on the EPB board */
+/*
+ * Base Register 2 and Option Register 2 configure SDRAM.
+ * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
+ *
+ * For BR2, need:
+ * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
+ * port size = 32-bits = BR2[19:20] = 11
+ * no parity checking = BR2[21:22] = 00
+ * SDRAM for MSEL = BR2[24:26] = 011
+ * Valid = BR[31] = 1
+ *
+ * 0 4 8 12 16 20 24 28
+ * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
+ *
+ * CFG_LBC_SDRAM_BASE should be masked and OR'ed into
+ * the top 17 bits of BR2.
+ */
+
+#define CFG_BR2_PRELIM 0xf0001861 /*Port size=32bit, MSEL=SDRAM */
+
+/*
+ * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
+ *
+ * For OR2, need:
+ * 64MB mask for AM, OR2[0:7] = 1111 1100
+ * XAM, OR2[17:18] = 11
+ * 9 columns OR2[19-21] = 010
+ * 13 rows OR2[23-25] = 100
+ * EAD set for extra time OR[31] = 1
+ *
+ * 0 4 8 12 16 20 24 28
+ * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
+ */
+
+#define CFG_OR2_PRELIM 0xfc006901
+
+#define CFG_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */
+#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32 */
+
+/*
+ * LSDMR masks
+ */
+#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4))
+
+#define CFG_LBC_LSDMR_COMMON 0x0063b723
+
+/*
+ * SDRAM Controller configuration sequence.
+ */
+#define CFG_LBC_LSDMR_1 ( CFG_LBC_LSDMR_COMMON \
+ | CFG_LBC_LSDMR_OP_PCHALL)
+#define CFG_LBC_LSDMR_2 ( CFG_LBC_LSDMR_COMMON \
+ | CFG_LBC_LSDMR_OP_ARFRSH)
+#define CFG_LBC_LSDMR_3 ( CFG_LBC_LSDMR_COMMON \
+ | CFG_LBC_LSDMR_OP_ARFRSH)
+#define CFG_LBC_LSDMR_4 ( CFG_LBC_LSDMR_COMMON \
+ | CFG_LBC_LSDMR_OP_MRW)
+#define CFG_LBC_LSDMR_5 ( CFG_LBC_LSDMR_COMMON \
+ | CFG_LBC_LSDMR_OP_NORMAL)
+
+#endif
+
+/*
+ * Windows to access PIB via local bus
+ */
+#define CFG_LBLAWBAR3_PRELIM 0xf8008000 /* windows base 0xf8008000 */
+#define CFG_LBLAWAR3_PRELIM 0x8000000f /* windows size 64KB */
+
+/*
+ * CS4 on Local Bus, to PIB
+ */
+#define CFG_BR4_PRELIM 0xf8008801 /* CS4 base address at 0xf8008000 */
+#define CFG_OR4_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */
+
+/*
+ * CS5 on Local Bus, to PIB
+ */
+#define CFG_BR5_PRELIM 0xf8010801 /* CS5 base address at 0xf8010000 */
+#define CFG_OR5_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX 1
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 1
+#define CFG_NS16550_CLK get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CFG_NS16550_COM1 (CFG_IMMRBAR+0x4500)
+#define CFG_NS16550_COM2 (CFG_IMMRBAR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* I2C */
+#define CONFIG_HARD_I2C /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 0x3F /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+#define CFG_I2C_NOPROBES {0x52} /* Don't probe these addrs */
+#define CFG_I2C_OFFSET 0x3000
+#define CFG_I2C2_OFFSET 0x3100
+
+/*
+ * Config on-board RTC
+ */
+#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */
+#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI_MEM_BASE 0x80000000
+#define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BASE
+#define CFG_PCI_MEM_SIZE 0x10000000 /* 256M */
+#define CFG_PCI_MMIO_BASE 0x90000000
+#define CFG_PCI_MMIO_PHYS CFG_PCI_MMIO_BASE
+#define CFG_PCI_MMIO_SIZE 0x10000000 /* 256M */
+#define CFG_PCI_IO_BASE 0xE0300000
+#define CFG_PCI_IO_PHYS 0xE0300000
+#define CFG_PCI_IO_SIZE 0x100000 /* 1M */
+
+#define CFG_PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE
+#define CFG_PCI_SLV_MEM_BUS 0x00000000
+#define CFG_PCI_SLV_MEM_SIZE 0x80000000
+
+
+#ifdef CONFIG_PCI
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CFG_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
+
+#endif /* CONFIG_PCI */
+
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI 1
+#endif
+
+/*
+ * Environment
+ */
+
+#ifndef CFG_RAMBOOT
+ #define CFG_ENV_IS_IN_FLASH 1
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
+ #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
+ #define CFG_ENV_SIZE 0x2000
+#else
+ #define CFG_NO_FLASH 1 /* Flash is not usable now */
+ #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
+ #define CFG_ENV_SIZE 0x2000
+#endif
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#if defined(CFG_RAMBOOT)
+#if defined(CONFIG_PCI)
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
+ | CFG_CMD_PING \
+ | CFG_CMD_ASKENV \
+ | CFG_CMD_PCI \
+ | CFG_CMD_I2C) \
+ & \
+ ~(CFG_CMD_ENV \
+ | CFG_CMD_LOADS))
+#else
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
+ | CFG_CMD_PING \
+ | CFG_CMD_ASKENV \
+ | CFG_CMD_I2C) \
+ & \
+ ~(CFG_CMD_ENV \
+ | CFG_CMD_LOADS))
+#endif
+#else
+#if defined(CONFIG_PCI)
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
+ | CFG_CMD_PCI \
+ | CFG_CMD_PING \
+ | CFG_CMD_ASKENV \
+ | CFG_CMD_I2C)
+#else
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
+ | CFG_CMD_PING \
+ | CFG_CMD_ASKENV \
+ | CFG_CMD_I2C )
+#endif
+#endif
+
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_LOAD_ADDR 0x2000000 /* default load address */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+ #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Core HID Setup
+ */
+#define CFG_HID0_INIT 0x000000000
+#define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK
+#define CFG_HID2 HID2_HBE
+
+/*
+ * Cache Config
+ */
+#define CFG_DCACHE_SIZE 32768
+#define CFG_CACHELINE_SIZE 32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value */
+#endif
+
+/*
+ * MMU Setup
+ */
+
+/* DDR: cache cacheable */
+#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT0L CFG_IBAT0L
+#define CFG_DBAT0U CFG_IBAT0U
+
+/* IMMRBAR & PCI IO: cache-inhibit and guarded */
+#define CFG_IBAT1L (CFG_IMMRBAR | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT1U (CFG_IMMRBAR | BATU_BL_4M | BATU_VS | BATU_VP)
+#define CFG_DBAT1L CFG_IBAT1L
+#define CFG_DBAT1U CFG_IBAT1U
+
+/* BCSR: cache-inhibit and guarded */
+#define CFG_IBAT2L (CFG_BCSR | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT2U (CFG_BCSR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_DBAT2L CFG_IBAT2L
+#define CFG_DBAT2U CFG_IBAT2U
+
+/* FLASH: icache cacheable, but dcache-inhibit and guarded */
+#define CFG_IBAT3L (CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT3U (CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CFG_DBAT3L (CFG_FLASH_BASE | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT3U CFG_IBAT3U
+
+/* Local bus SDRAM: cacheable */
+#define CFG_IBAT4L (CFG_LBC_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT4U (CFG_LBC_SDRAM_BASE | BATU_BL_64M | BATU_VS | BATU_VP)
+#define CFG_DBAT4L CFG_IBAT4L
+#define CFG_DBAT4U CFG_IBAT4U
+
+/* Stack in dcache: cacheable, no memory coherence */
+#define CFG_IBAT5L (CFG_INIT_RAM_ADDR | BATL_PP_10)
+#define CFG_IBAT5U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_DBAT5L CFG_IBAT5L
+#define CFG_DBAT5U CFG_IBAT5U
+
+#ifdef CONFIG_PCI
+/* PCI MEM space: cacheable */
+#define CFG_IBAT6L (CFG_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT6U (CFG_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT6L CFG_IBAT6L
+#define CFG_DBAT6U CFG_IBAT6U
+/* PCI MMIO space: cache-inhibit and guarded */
+#define CFG_IBAT7L (CFG_PCI_MMIO_PHYS | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT7U (CFG_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT7L CFG_IBAT7L
+#define CFG_DBAT7U CFG_IBAT7U
+#else
+#define CFG_IBAT6L (0)
+#define CFG_IBAT6U (0)
+#define CFG_IBAT7L (0)
+#define CFG_IBAT7U (0)
+#define CFG_DBAT6L CFG_IBAT6L
+#define CFG_DBAT6U CFG_IBAT6U
+#define CFG_DBAT7L CFG_IBAT7L
+#define CFG_DBAT7U CFG_IBAT7U
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+
+#define CONFIG_ENV_OVERWRITE
+
+#if defined(CONFIG_UEC_ETH)
+#define CONFIG_ETHADDR 00:04:9f:ef:01:01
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR 00:04:9f:ef:01:02
+#endif
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */
+
+#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */
+#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "consoledev=ttyS0\0" \
+ "ramdiskaddr=400000\0" \
+ "ramdiskfile=ramfs.83xx\0" \
+
+#define CONFIG_NFSBOOTCOMMAND \
+ "setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$serverip:$rootpath " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $loadaddr $bootfile;" \
+ "bootm $loadaddr"
+
+#define CONFIG_RAMBOOTCOMMAND \
+ "setenv bootargs root=/dev/ram rw " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $ramdiskaddr $ramdiskfile;" \
+ "tftp $loadaddr $bootfile;" \
+ "bootm $loadaddr $ramdiskaddr"
+
+#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
+
+#endif /* __CONFIG_H */
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
index d5b7bca..03dd0ca 100644
--- a/include/mpc83xx.h
+++ b/include/mpc83xx.h
@@ -8,16 +8,6 @@
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
*/
/*
@@ -89,8 +79,30 @@
/*
* The device ID and revision numbers
*/
-#define SPR_8349E_REV10 0x80300100
-#define SPR_8349E_REV11 0x80300101
+#define SPR_8349E_REV10 0x80300100
+#define SPR_8349_REV10 0x80310100
+#define SPR_8347E_REV10_TBGA 0x80320100
+#define SPR_8347_REV10_TBGA 0x80330100
+#define SPR_8347E_REV10_PBGA 0x80340100
+#define SPR_8347_REV10_PBGA 0x80350100
+#define SPR_8343E_REV10 0x80360100
+#define SPR_8343_REV10 0x80370100
+
+#define SPR_8349E_REV11 0x80300101
+#define SPR_8349_REV11 0x80310101
+#define SPR_8347E_REV11_TBGA 0x80320101
+#define SPR_8347_REV11_TBGA 0x80330101
+#define SPR_8347E_REV11_PBGA 0x80340101
+#define SPR_8347_REV11_PBGA 0x80350101
+#define SPR_8343E_REV11 0x80360101
+#define SPR_8343_REV11 0x80370101
+
+#define SPR_8360E_REV10 0x80480010
+#define SPR_8360_REV10 0x80490010
+#define SPR_8360E_REV11 0x80480011
+#define SPR_8360_REV11 0x80490011
+#define SPR_8360E_REV12 0x80480012
+#define SPR_8360_REV12 0x80490012
/*
* Base Registers & Option Registers
@@ -122,9 +134,17 @@
#define BR_MS_UPMA 0x00000080 /* UPMA */
#define BR_MS_UPMB 0x000000A0 /* UPMB */
#define BR_MS_UPMC 0x000000C0 /* UPMC */
+#if defined (CONFIG_MPC8360)
+#define BR_ATOM 0x0000000C
+#define BR_ATOM_SHIFT 2
+#endif
#define BR_V 0x00000001
#define BR_V_SHIFT 0
+#if defined (CONFIG_MPC8349)
#define BR_RES ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_V)
+#elif defined (CONFIG_MPC8360)
+#define BR_RES ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_ATOM|BR_V)
+#endif
#define OR0 0x5004
#define OR1 0x500C
@@ -207,14 +227,21 @@
#define HRCWH_PCI_AGENT 0x00000000
#define HRCWH_PCI_HOST 0x80000000
+#if defined (CONFIG_MPC8349)
#define HRCWH_32_BIT_PCI 0x00000000
#define HRCWH_64_BIT_PCI 0x40000000
+#endif
#define HRCWH_PCI1_ARBITER_DISABLE 0x00000000
#define HRCWH_PCI1_ARBITER_ENABLE 0x20000000
+#if defined (CONFIG_MPC8349)
#define HRCWH_PCI2_ARBITER_DISABLE 0x00000000
#define HRCWH_PCI2_ARBITER_ENABLE 0x10000000
+#elif defined (CONFIG_MPC8360)
+#define HRCWH_PCICKDRV_DISABLE 0x00000000
+#define HRCWH_PCICKDRV_ENABLE 0x10000000
+#endif
#define HRCWH_CORE_DISABLE 0x08000000
#define HRCWH_CORE_ENABLE 0x00000000
@@ -231,11 +258,14 @@
#define HRCWH_ROM_LOC_DDR_SDRAM 0x00000000
#define HRCWH_ROM_LOC_PCI1 0x00100000
+#if defined (CONFIG_MPC8349)
#define HRCWH_ROM_LOC_PCI2 0x00200000
+#endif
#define HRCWH_ROM_LOC_LOCAL_8BIT 0x00500000
#define HRCWH_ROM_LOC_LOCAL_16BIT 0x00600000
#define HRCWH_ROM_LOC_LOCAL_32BIT 0x00700000
+#if defined (CONFIG_MPC8349)
#define HRCWH_TSEC1M_IN_RGMII 0x00000000
#define HRCWH_TSEC1M_IN_RTBI 0x00004000
#define HRCWH_TSEC1M_IN_GMII 0x00008000
@@ -245,6 +275,12 @@
#define HRCWH_TSEC2M_IN_RTBI 0x00001000
#define HRCWH_TSEC2M_IN_GMII 0x00002000
#define HRCWH_TSEC2M_IN_TBI 0x00003000
+#endif
+
+#if defined (CONFIG_MPC8360)
+#define HRCWH_SECONDARY_DDR_DISABLE 0x00000000
+#define HRCWH_SECONDARY_DDR_ENABLE 0x00000010
+#endif
#define HRCWH_BIG_ENDIAN 0x00000000
#define HRCWH_LITTLE_ENDIAN 0x00000008
@@ -293,6 +329,47 @@
#define HRCWL_CORE_TO_CSB_2_5X1 0x00050000
#define HRCWL_CORE_TO_CSB_3X1 0x00060000
+#if defined (CONFIG_MPC8360)
+#define HRCWL_CE_PLL_VCO_DIV_4 0x00000000
+#define HRCWL_CE_PLL_VCO_DIV_8 0x00000040
+#define HRCWL_CE_PLL_VCO_DIV_2 0x00000080
+
+#define HRCWL_CE_PLL_DIV_1X1 0x00000000
+#define HRCWL_CE_PLL_DIV_2X1 0x00000020
+
+#define HRCWL_CE_TO_PLL_1X16_ 0x00000000
+#define HRCWL_CE_TO_PLL_1X2 0x00000002
+#define HRCWL_CE_TO_PLL_1X3 0x00000003
+#define HRCWL_CE_TO_PLL_1X4 0x00000004
+#define HRCWL_CE_TO_PLL_1X5 0x00000005
+#define HRCWL_CE_TO_PLL_1X6 0x00000006
+#define HRCWL_CE_TO_PLL_1X7 0x00000007
+#define HRCWL_CE_TO_PLL_1X8 0x00000008
+#define HRCWL_CE_TO_PLL_1X9 0x00000009
+#define HRCWL_CE_TO_PLL_1X10 0x0000000A
+#define HRCWL_CE_TO_PLL_1X11 0x0000000B
+#define HRCWL_CE_TO_PLL_1X12 0x0000000C
+#define HRCWL_CE_TO_PLL_1X13 0x0000000D
+#define HRCWL_CE_TO_PLL_1X14 0x0000000E
+#define HRCWL_CE_TO_PLL_1X15 0x0000000F
+#define HRCWL_CE_TO_PLL_1X16 0x00000010
+#define HRCWL_CE_TO_PLL_1X17 0x00000011
+#define HRCWL_CE_TO_PLL_1X18 0x00000012
+#define HRCWL_CE_TO_PLL_1X19 0x00000013
+#define HRCWL_CE_TO_PLL_1X20 0x00000014
+#define HRCWL_CE_TO_PLL_1X21 0x00000015
+#define HRCWL_CE_TO_PLL_1X22 0x00000016
+#define HRCWL_CE_TO_PLL_1X23 0x00000017
+#define HRCWL_CE_TO_PLL_1X24 0x00000018
+#define HRCWL_CE_TO_PLL_1X25 0x00000019
+#define HRCWL_CE_TO_PLL_1X26 0x0000001A
+#define HRCWL_CE_TO_PLL_1X27 0x0000001B
+#define HRCWL_CE_TO_PLL_1X28 0x0000001C
+#define HRCWL_CE_TO_PLL_1X29 0x0000001D
+#define HRCWL_CE_TO_PLL_1X30 0x0000001E
+#define HRCWL_CE_TO_PLL_1X31 0x0000001F
+#endif
+
/*
* LCRR - Clock Ratio Register (10.3.1.16)
*/
@@ -346,6 +423,7 @@
| SCCR_TSEC2CM_3 \
| SCCR_ENCCM_3 \
| SCCR_USBCM_3 )
+
#define SCCR_DEFAULT 0xFFFFFFFF
#endif /* __MPC83XX_H__ */