net: Add eth phy generic driver for shared MDIO
For dual ethernet controllers, the HW design may connect ETH phys to
one MDIO ports. So two different ethernet drivers have to share MDIO bus.
Since two ethernet drivers are independent, we can't ensure their probe
order.
To resolve this problem, introduce an eth phy generic driver and uclass.
After eth-uclass binds, we search the mdio node and binds the phy node
with the eth-phy-generic driver.
When one eth driver get its phy device, the parent of phy device will
probe prior than phy device. So this ensure the eth driver ownes the
MDIO bus will be probed before using its MDIO.
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index a2587a2..38f2bd6 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -57,6 +57,12 @@
This driver is used for testing in test/dm/mdio.c
+config DM_ETH_PHY
+ bool "Enable Driver Model for Ethernet Generic PHY drivers"
+ depends on DM
+ help
+ Enable driver model for Ethernet Generic PHY .
+
menuconfig NETDEVICES
bool "Network device support"
depends on NET
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 6d9b877..383ed1c 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -20,6 +20,7 @@
obj-$(CONFIG_ETH_DESIGNWARE_SOCFPGA) += dwmac_socfpga.o
obj-$(CONFIG_DRIVER_DM9000) += dm9000x.o
obj-$(CONFIG_DNET) += dnet.o
+obj-$(CONFIG_DM_ETH_PHY) += eth-phy-uclass.o
obj-$(CONFIG_E1000) += e1000.o
obj-$(CONFIG_E1000_SPI) += e1000_spi.o
obj-$(CONFIG_EEPRO100) += eepro100.o
diff --git a/drivers/net/eth-phy-uclass.c b/drivers/net/eth-phy-uclass.c
new file mode 100644
index 0000000..b383f45
--- /dev/null
+++ b/drivers/net/eth-phy-uclass.c
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 NXP
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <net.h>
+#include <dm/device-internal.h>
+#include <dm/uclass-internal.h>
+#include <dm/lists.h>
+
+struct eth_phy_device_priv {
+ struct mii_dev *mdio_bus;
+};
+
+int eth_phy_binds_nodes(struct udevice *eth_dev)
+{
+ ofnode mdio_node, phy_node;
+ const char *node_name;
+ int ret;
+
+ mdio_node = dev_read_subnode(eth_dev, "mdio");
+ if (!ofnode_valid(mdio_node)) {
+ debug("%s: %s mdio subnode not found!", __func__,
+ eth_dev->name);
+ return -ENXIO;
+ }
+
+ ofnode_for_each_subnode(phy_node, mdio_node) {
+ node_name = ofnode_get_name(phy_node);
+
+ debug("* Found child node: '%s'\n", node_name);
+
+ ret = device_bind_driver_to_node(eth_dev,
+ "eth_phy_generic_drv",
+ node_name, phy_node, NULL);
+ if (ret) {
+ debug(" - Eth phy binding error: %d\n", ret);
+ continue;
+ }
+
+ debug(" - bound phy device: '%s'\n", node_name);
+ }
+
+ return 0;
+}
+
+int eth_phy_set_mdio_bus(struct udevice *eth_dev, struct mii_dev *mdio_bus)
+{
+ struct udevice *dev;
+ struct eth_phy_device_priv *uc_priv;
+
+ for (uclass_first_device(UCLASS_ETH_PHY, &dev); dev;
+ uclass_next_device(&dev)) {
+ if (dev->parent == eth_dev) {
+ uc_priv = (struct eth_phy_device_priv *)(dev->uclass_priv);
+
+ if (!uc_priv->mdio_bus)
+ uc_priv->mdio_bus = mdio_bus;
+ }
+ }
+
+ return 0;
+}
+
+struct mii_dev *eth_phy_get_mdio_bus(struct udevice *eth_dev)
+{
+ int ret;
+ struct udevice *phy_dev;
+ struct eth_phy_device_priv *uc_priv;
+
+ /* Will probe the parent of phy device, then phy device */
+ ret = uclass_get_device_by_phandle(UCLASS_ETH_PHY, eth_dev,
+ "phy-handle", &phy_dev);
+ if (!ret) {
+ if (eth_dev != phy_dev->parent) {
+ /*
+ * phy_dev is shared and controlled by
+ * other eth controller
+ */
+ uc_priv = (struct eth_phy_device_priv *)(phy_dev->uclass_priv);
+ if (uc_priv->mdio_bus)
+ printf("Get shared mii bus on %s\n", eth_dev->name);
+ else
+ printf("Can't get shared mii bus on %s\n", eth_dev->name);
+
+ return uc_priv->mdio_bus;
+ }
+ } else {
+ printf("FEC: can't find phy-handle\n");
+ }
+
+ return NULL;
+}
+
+int eth_phy_get_addr(struct udevice *dev)
+{
+ struct ofnode_phandle_args phandle_args;
+ int reg;
+
+ if (dev_read_phandle_with_args(dev, "phy-handle", NULL, 0, 0,
+ &phandle_args)) {
+ debug("Failed to find phy-handle");
+ return -ENODEV;
+ }
+
+ reg = ofnode_read_u32_default(phandle_args.node, "reg", 0);
+
+ return reg;
+}
+
+UCLASS_DRIVER(eth_phy_generic) = {
+ .id = UCLASS_ETH_PHY,
+ .name = "eth_phy_generic",
+ .per_device_auto_alloc_size = sizeof(struct eth_phy_device_priv),
+};
+
+U_BOOT_DRIVER(eth_phy_generic_drv) = {
+ .name = "eth_phy_generic_drv",
+ .id = UCLASS_ETH_PHY,
+};