arm: dts: arria10: Update dtsi/dts from Linux
Update these 3 files from Linux:.
- socfpga_arria10.dtsi (Commit ID c1459a9d7e92)
- socfpga_arria10_socdk.dtsi (Commit ID d9b9f805ee2b)
- socfpga_arria10_socdk_sdmmc.dts (Commit ID 17808d445b6f)
Change in socfpga_arria10.dtsi:
- Add clkmgr label, so that can reference to it in u-boot.dtsi.
Change in socfpga_arria10-u-boot.dtsi:
- Add compatible and altr,sysmgr-syscon for uboot.
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
diff --git a/arch/arm/dts/socfpga_arria10.dtsi b/arch/arm/dts/socfpga_arria10.dtsi
index c8cd5a8..a598c75 100644
--- a/arch/arm/dts/socfpga_arria10.dtsi
+++ b/arch/arm/dts/socfpga_arria10.dtsi
@@ -1,17 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright Altera Corporation (C) 2014. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -79,6 +68,8 @@
#dma-requests = <32>;
clocks = <&l4_main_clk>;
clock-names = "apb_pclk";
+ resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>;
+ reset-names = "dma", "dma-ocp";
};
};
@@ -377,13 +368,28 @@
clk-gate = <0xC8 11>;
};
- nand_clk: nand_clk {
+ nand_x_clk: nand_x_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-a10-gate-clk";
clocks = <&l4_mp_clk>;
clk-gate = <0xC8 10>;
};
+ nand_ecc_clk: nand_ecc_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&nand_x_clk>;
+ clk-gate = <0xC8 10>;
+ };
+
+ nand_clk: nand_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&nand_x_clk>;
+ fixed-divider = <4>;
+ clk-gate = <0xC8 10>;
+ };
+
spi_m_clk: spi_m_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-a10-gate-clk";
@@ -414,7 +420,7 @@
};
gmac0: ethernet@ff800000 {
- compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
+ compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.72a", "snps,dwmac";
altr,sysmgr-syscon = <&sysmgr 0x44 0>;
reg = <0xff800000 0x2000>;
interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -434,8 +440,8 @@
};
gmac1: ethernet@ff802000 {
- compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
- altr,sysmgr-syscon = <&sysmgr 0x48 0>;
+ compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.72a", "snps,dwmac";
+ altr,sysmgr-syscon = <&sysmgr 0x48 8>;
reg = <0xff802000 0x2000>;
interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
@@ -454,8 +460,8 @@
};
gmac2: ethernet@ff804000 {
- compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
- altr,sysmgr-syscon = <&sysmgr 0x4C 0>;
+ compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.72a", "snps,dwmac";
+ altr,sysmgr-syscon = <&sysmgr 0x4C 16>;
reg = <0xff804000 0x2000>;
interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
@@ -478,6 +484,7 @@
#size-cells = <0>;
compatible = "snps,dw-apb-gpio";
reg = <0xffc02900 0x100>;
+ resets = <&rst GPIO0_RESET>;
status = "disabled";
porta: gpio-controller@0 {
@@ -497,6 +504,7 @@
#size-cells = <0>;
compatible = "snps,dw-apb-gpio";
reg = <0xffc02a00 0x100>;
+ resets = <&rst GPIO1_RESET>;
status = "disabled";
portb: gpio-controller@0 {
@@ -516,6 +524,7 @@
#size-cells = <0>;
compatible = "snps,dw-apb-gpio";
reg = <0xffc02b00 0x100>;
+ resets = <&rst GPIO2_RESET>;
status = "disabled";
portc: gpio-controller@0 {
@@ -594,22 +603,35 @@
status = "disabled";
};
+ spi0: spi@ffda4000 {
+ compatible = "snps,dw-apb-ssi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xffda4000 0x100>;
+ interrupts = <0 101 4>;
+ num-cs = <4>;
+ /*32bit_access;*/
+ clocks = <&spi_m_clk>;
+ resets = <&rst SPIM0_RESET>;
+ status = "disabled";
+ };
+
spi1: spi@ffda5000 {
compatible = "snps,dw-apb-ssi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0xffda5000 0x100>;
interrupts = <0 102 4>;
- num-chipselect = <4>;
- bus-num = <0>;
+ num-cs = <4>;
/*32bit_access;*/
tx-dma-channel = <&pdma 16>;
rx-dma-channel = <&pdma 17>;
clocks = <&spi_m_clk>;
+ resets = <&rst SPIM1_RESET>;
status = "disabled";
};
- sdr: sdr@ffc25000 {
+ sdr: sdr@ffcfb100 {
compatible = "altr,sdr-ctl", "syscon";
reg = <0xffcfb100 0x80>;
};
@@ -640,14 +662,14 @@
nand: nand@ffb90000 {
#address-cells = <1>;
- #size-cells = <1>;
- compatible = "denali,denali-nand-dt", "altr,socfpga-denali-nand";
- reg = <0xffb90000 0x20>,
- <0xffb80000 0x1000>;
+ #size-cells = <0>;
+ compatible = "altr,socfpga-denali-nand";
+ reg = <0xffb90000 0x72000>,
+ <0xffb80000 0x10000>;
reg-names = "nand_data", "denali_reg";
interrupts = <0 99 4>;
- dma-mask = <0xffffffff>;
- clocks = <&nand_clk>;
+ clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
+ clock-names = "nand", "nand_x", "ecc";
resets = <&rst NAND_RESET>;
status = "disabled";
};
@@ -733,6 +755,8 @@
cdns,fifo-width = <4>;
cdns,trigger-address = <0x00000000>;
clocks = <&qspi_clk>;
+ resets = <&rst QSPI_RESET>, <&rst QSPI_OCP_RESET>;
+ reset-names = "qspi", "qspi-ocp";
status = "disabled";
};
@@ -758,7 +782,7 @@
timer@ffffc600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xffffc600 0x100>;
- interrupts = <1 13 0xf04>;
+ interrupts = <1 13 0xf01>;
clocks = <&mpu_periph_clk>;
};
@@ -768,6 +792,8 @@
reg = <0xffc02700 0x100>;
clocks = <&l4_sp_clk>;
clock-names = "timer";
+ resets = <&rst SPTIMER0_RESET>;
+ reset-names = "timer";
};
timer1: timer1@ffc02800 {
@@ -776,6 +802,8 @@
reg = <0xffc02800 0x100>;
clocks = <&l4_sp_clk>;
clock-names = "timer";
+ resets = <&rst SPTIMER1_RESET>;
+ reset-names = "timer";
};
timer2: timer2@ffd00000 {
@@ -784,6 +812,8 @@
reg = <0xffd00000 0x100>;
clocks = <&l4_sys_free_clk>;
clock-names = "timer";
+ resets = <&rst L4SYSTIMER0_RESET>;
+ reset-names = "timer";
};
timer3: timer3@ffd00100 {
@@ -792,6 +822,8 @@
reg = <0xffd01000 0x100>;
clocks = <&l4_sys_free_clk>;
clock-names = "timer";
+ resets = <&rst L4SYSTIMER1_RESET>;
+ reset-names = "timer";
};
uart0: serial0@ffc02000 {
@@ -853,6 +885,7 @@
reg = <0xffd00200 0x100>;
interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&l4_sys_free_clk>;
+ resets = <&rst L4WD0_RESET>;
status = "disabled";
};
@@ -861,6 +894,7 @@
reg = <0xffd00300 0x100>;
interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&l4_sys_free_clk>;
+ resets = <&rst L4WD1_RESET>;
status = "disabled";
};
};