net: zynq: Disable secondary queues
Zynq has no priority queues.
ZynqMP has one priority queue and this change is required
to get ethernet working.
This patch was not needed on ep108 for uknown reason even
it should be used.
Tested on Zynq and ZynqMP.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c
index 1b5b6fd..027b49b 100644
--- a/drivers/net/zynq_gem.c
+++ b/drivers/net/zynq_gem.c
@@ -132,6 +132,10 @@
u32 reserved6[18];
#define STAT_SIZE 44
u32 stat[STAT_SIZE]; /* 0x100 - Octects transmitted Low reg */
+ u32 reserved7[164];
+ u32 transmit_q1_ptr; /* 0x440 - Transmit priority queue 1 */
+ u32 reserved8[15];
+ u32 receive_q1_ptr; /* 0x480 - Receive priority queue 1 */
};
/* BD descriptors */
@@ -148,6 +152,9 @@
/* BD separation space */
#define BD_SEPRN_SPACE (RX_BUF * sizeof(struct emac_bd))
+/* Setup the first free TX descriptor */
+#define TX_FREE_DESC 2
+
/* Initialized, rxbd_current, rx_first_buf must be 0 after init */
struct zynq_gem_priv {
struct emac_bd *tx_bd;
@@ -305,6 +312,8 @@
struct phy_device *phydev;
struct zynq_gem_regs *regs = (struct zynq_gem_regs *)dev->iobase;
struct zynq_gem_priv *priv = dev->priv;
+ struct emac_bd *dummy_tx_bd = &priv->tx_bd[TX_FREE_DESC];
+ struct emac_bd *dummy_rx_bd = &priv->tx_bd[TX_FREE_DESC + 2];
const u32 supported = SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
@@ -353,6 +362,23 @@
/* Setup for Network Control register, MDIO, Rx and Tx enable */
setbits_le32(®s->nwctrl, ZYNQ_GEM_NWCTRL_MDEN_MASK);
+ /* Disable the second priority queue */
+ dummy_tx_bd->addr = 0;
+ dummy_tx_bd->status = ZYNQ_GEM_TXBUF_WRAP_MASK |
+ ZYNQ_GEM_TXBUF_LAST_MASK|
+ ZYNQ_GEM_TXBUF_USED_MASK;
+
+ dummy_rx_bd->addr = ZYNQ_GEM_RXBUF_WRAP_MASK |
+ ZYNQ_GEM_RXBUF_NEW_MASK;
+ dummy_rx_bd->status = 0;
+ flush_dcache_range((ulong)&dummy_tx_bd, (ulong)&dummy_tx_bd +
+ sizeof(dummy_tx_bd));
+ flush_dcache_range((ulong)&dummy_rx_bd, (ulong)&dummy_rx_bd +
+ sizeof(dummy_rx_bd));
+
+ writel((ulong)dummy_tx_bd, ®s->transmit_q1_ptr);
+ writel((ulong)dummy_rx_bd, ®s->receive_q1_ptr);
+
priv->init++;
}