powerpc/p4080: Add workaround for errata SERDES8
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
index d7835c8..01c462c 100644
--- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c
+++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
@@ -41,6 +41,10 @@
}
#endif
+#if defined(CONFIG_SYS_P4080_ERRATUM_SERDES8)
+ puts("Work-around for Erratum SERDES8 enabled\n");
+#endif
+
return 0;
}
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
index 1c03061..5bcf91a 100644
--- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
@@ -21,10 +21,14 @@
*/
#include <common.h>
+#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
+#include <hwconfig.h>
+#endif
#include <asm/fsl_serdes.h>
#include <asm/immap_85xx.h>
#include <asm/io.h>
#include <asm/processor.h>
+#include <asm/fsl_law.h>
#include "fsl_corenet_serdes.h"
static u32 serdes_prtcl_map;
@@ -102,6 +106,13 @@
if (in_be32(®s->bank[bank].rstctl) & SRDS_RSTCTL_SDPD)
return 0;
+#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
+ if (!IS_SVR_REV(get_svr(), 1, 0))
+ if (bank > 0)
+ return !(srds_lpd_b[bank] &
+ (8 >> (lane - (6 + 4 * bank))));
+#endif
+
return !(in_be32(&gur->rcwsr[word]) & (0x80000000 >> bit));
}
@@ -116,6 +127,140 @@
return (1 << device) & serdes_prtcl_map;
}
+#ifndef CONFIG_SYS_DCSRBAR_PHYS
+#define CONFIG_SYS_DCSRBAR_PHYS 0x80000000 /* Must be 1GB-aligned for rev1.0 */
+#define CONFIG_SYS_DCSRBAR 0x80000000
+#define __DCSR_NOT_DEFINED_BY_CONFIG
+#endif
+
+#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
+static void enable_bank(ccsr_gur_t *gur, int bank)
+{
+ u32 rcw5;
+
+ /*
+ * Enable the lanes SRDS_LPD_Bn. The RCW bits are read-only in
+ * CCSR, and read/write in DSCR.
+ */
+ rcw5 = in_be32(gur->rcwsr + 5);
+ if (bank == FSL_SRDS_BANK_2) {
+ rcw5 &= ~FSL_CORENET_RCWSRn_SRDS_LPD_B2;
+ rcw5 |= srds_lpd_b[bank] << 26;
+ } else if (bank == FSL_SRDS_BANK_3) {
+ rcw5 &= ~FSL_CORENET_RCWSRn_SRDS_LPD_B3;
+ rcw5 |= srds_lpd_b[bank] << 18;
+ } else {
+ printf("SERDES: enable_bank: bad bank %d\n", bank + 1);
+ return;
+ }
+
+ /* See similar code in cpu/mpc85xx/cpu_init.c for an explanation
+ * of the DCSR mapping.
+ */
+ {
+#ifdef __DCSR_NOT_DEFINED_BY_CONFIG
+ struct law_entry law = find_law(CONFIG_SYS_DCSRBAR_PHYS);
+ int law_index;
+ if (law.index == -1)
+ law_index = set_next_law(CONFIG_SYS_DCSRBAR_PHYS,
+ LAW_SIZE_1M, LAW_TRGT_IF_DCSR);
+ else
+ set_law(law.index, CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_1M,
+ LAW_TRGT_IF_DCSR);
+#endif
+ u32 *p = (void *)CONFIG_SYS_DCSRBAR + 0x20114;
+ out_be32(p, rcw5);
+#ifdef __DCSR_NOT_DEFINED_BY_CONFIG
+ if (law.index == -1)
+ disable_law(law_index);
+ else
+ set_law(law.index, law.addr, law.size, law.trgt_id);
+#endif
+ }
+}
+
+/*
+ * To avoid problems with clock jitter, rev 2 p4080 uses the pll from
+ * bank 3 to clock banks 2 and 3, as well as a limited selection of
+ * protocol configurations. This requires that banks 2 and 3's lanes be
+ * disabled in the RCW, and enabled with some fixup here to re-enable
+ * them, and to configure bank 2's clock parameters in bank 3's pll in
+ * cases where they differ.
+ */
+static void p4080_erratum_serdes8(serdes_corenet_t *regs, ccsr_gur_t *gur,
+ u32 devdisr, u32 devdisr2, int cfg)
+{
+ int srds_ratio_b2;
+ int rfck_sel;
+
+ /*
+ * The disabled lanes of bank 2 will cause the associated
+ * logic blocks to be disabled in DEVDISR. We reverse that here.
+ *
+ * Note that normally it is not permitted to clear DEVDISR bits
+ * once the device has been disabled, but the hardware people
+ * say that this special case is OK.
+ */
+ clrbits_be32(&gur->devdisr, devdisr);
+ clrbits_be32(&gur->devdisr2, devdisr2);
+
+ /*
+ * Some protocols require special handling. There are a few
+ * additional protocol configurations that can be used, which are
+ * not listed here. See app note 4065 for supported protocol
+ * configurations.
+ */
+ switch (cfg) {
+ case 0x19:
+ /*
+ * Bank 2 has PCIe which wants BWSEL -- tell bank 3's PLL.
+ * SGMII on bank 3 should still be usable.
+ */
+ setbits_be32(®s->bank[FSL_SRDS_BANK_3].pllcr1,
+ SRDS_PLLCR1_PLL_BWSEL);
+
+ enable_bank(gur, FSL_SRDS_BANK_3);
+ break;
+
+ case 0x0f:
+ case 0x10:
+ /*
+ * Banks 2 (XAUI) and 3 (SGMII) have different clocking
+ * requirements in these configurations. Bank 3 cannot
+ * be used and should have its lanes (but not the bank
+ * itself) disabled in the RCW. We set up bank 3's pll
+ * for bank 2's needs here.
+ */
+ srds_ratio_b2 = (in_be32(&gur->rcwsr[4]) >> 13) & 7;
+
+ /* Determine refclock from XAUI ratio */
+ switch (srds_ratio_b2) {
+ case 1: /* 20:1 */
+ rfck_sel = SRDS_PLLCR0_RFCK_SEL_156_25;
+ break;
+ case 2: /* 25:1 */
+ rfck_sel = SRDS_PLLCR0_RFCK_SEL_125;
+ break;
+ default:
+ printf("SERDES: bad SRDS_RATIO_B2 %d\n",
+ srds_ratio_b2);
+ return;
+ }
+
+ clrsetbits_be32(®s->bank[FSL_SRDS_BANK_3].pllcr0,
+ SRDS_PLLCR0_RFCK_SEL_MASK, rfck_sel);
+
+ clrsetbits_be32(®s->bank[FSL_SRDS_BANK_3].pllcr0,
+ SRDS_PLLCR0_FRATE_SEL_MASK,
+ SRDS_PLLCR0_FRATE_SEL_6_25);
+ break;
+ default:
+ enable_bank(gur, FSL_SRDS_BANK_3);
+ }
+
+}
+#endif
+
void fsl_serdes_init(void)
{
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
@@ -125,6 +270,13 @@
enum srds_prtcl lane_prtcl;
long long end_tick;
int have_bank[SRDS_MAX_BANK] = {};
+#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
+ u32 serdes8_devdisr = 0;
+ u32 serdes8_devdisr2 = 0;
+ char srds_lpd_opt[16];
+ const char *srds_lpd_arg;
+ size_t arglen;
+#endif
/* Is serdes enabled at all? */
if (!(in_be32(&gur->rcwsr[5]) & FSL_CORENET_RCWSR5_SRDS_EN))
@@ -139,6 +291,18 @@
return;
}
+#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
+ if (!IS_SVR_REV(get_svr(), 1, 0))
+ for (bank = 1; bank < ARRAY_SIZE(srds_lpd_b); bank++) {
+ sprintf(srds_lpd_opt, "fsl_srds_lpd_b%u", bank + 1);
+ srds_lpd_arg = hwconfig_subarg("serdes", srds_lpd_opt,
+ &arglen);
+ if (srds_lpd_arg)
+ srds_lpd_b[bank] = simple_strtoul(srds_lpd_arg,
+ NULL, 0);
+ }
+#endif
+
/* Look for banks with all lanes disabled, and power down the bank. */
for (lane = 0; lane < SRDS_MAX_LANES; lane++) {
enum srds_prtcl lane_prtcl = serdes_get_prtcl(cfg, lane);
@@ -148,6 +312,35 @@
}
}
+#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
+ if (IS_SVR_REV(get_svr(), 1, 0)) {
+ /* At least one bank must be disabled due to SERDES8. If
+ * no bank is found to be disabled based on lane
+ * disables, disable bank 3 because we can't turn off its
+ * lanes in the RCW without disabling MDIO due to erratum
+ * GEN8.
+ *
+ * This means that if you are relying on bank 3 being
+ * disabled to avoid SERDES8, in some cases you cannot
+ * also disable all lanes of another bank, or else bank
+ * 3 won't be disabled, leaving you with a configuration
+ * that isn't valid according to SERDES8 (e.g. if banks
+ * 2 and 3 have the same clock, and bank 1 is disabled
+ * instead of 3).
+ */
+ for (bank = 0; bank < SRDS_MAX_BANK; bank++) {
+ if (!have_bank[bank])
+ break;
+ }
+
+ if (bank == SRDS_MAX_BANK)
+ have_bank[FSL_SRDS_BANK_3] = 0;
+ } else {
+ if (have_bank[FSL_SRDS_BANK_2])
+ have_bank[FSL_SRDS_BANK_3] = 1;
+ }
+#endif
+
for (bank = 0; bank < SRDS_MAX_BANK; bank++) {
if (!have_bank[bank]) {
printf("SERDES: bank %d disabled\n", bank + 1);
@@ -177,6 +370,68 @@
printf("%s ", serdes_prtcl_str[lane_prtcl]);
#endif
+
+#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
+ switch (lane_prtcl) {
+ case PCIE1:
+ case PCIE2:
+ case PCIE3:
+ serdes8_devdisr |= FSL_CORENET_DEVDISR_PCIE1 >>
+ (lane_prtcl - PCIE1);
+ break;
+ case SRIO1:
+ case SRIO2:
+ serdes8_devdisr |= FSL_CORENET_DEVDISR_SRIO1 >>
+ (lane_prtcl - SRIO1);
+ break;
+ case SGMII_FM1_DTSEC1:
+ serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM1 |
+ FSL_CORENET_DEVDISR2_DTSEC1_1;
+ break;
+ case SGMII_FM1_DTSEC2:
+ serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM1 |
+ FSL_CORENET_DEVDISR2_DTSEC1_2;
+ break;
+ case SGMII_FM1_DTSEC3:
+ serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM1 |
+ FSL_CORENET_DEVDISR2_DTSEC1_3;
+ break;
+ case SGMII_FM1_DTSEC4:
+ serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM1 |
+ FSL_CORENET_DEVDISR2_DTSEC1_4;
+ break;
+ case SGMII_FM2_DTSEC1:
+ serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM2 |
+ FSL_CORENET_DEVDISR2_DTSEC2_1;
+ break;
+ case SGMII_FM2_DTSEC2:
+ serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM2 |
+ FSL_CORENET_DEVDISR2_DTSEC2_2;
+ break;
+ case SGMII_FM2_DTSEC3:
+ serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM2 |
+ FSL_CORENET_DEVDISR2_DTSEC2_3;
+ break;
+ case SGMII_FM2_DTSEC4:
+ serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM2 |
+ FSL_CORENET_DEVDISR2_DTSEC2_4;
+ break;
+ case XAUI_FM1:
+ case XAUI_FM2:
+ if (lane_prtcl == XAUI_FM1)
+ serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM1 |
+ FSL_CORENET_DEVDISR2_10GEC1;
+ else
+ serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM2 |
+ FSL_CORENET_DEVDISR2_10GEC2;
+ break;
+ case AURORA:
+ break;
+ default:
+ break;
+ }
+
+#endif
}
#ifdef DEBUG
@@ -188,10 +443,38 @@
bank = idx;
+#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
+ if (!IS_SVR_REV(get_svr(), 1, 0)) {
+ /*
+ * Change bank init order to 0, 2, 1, so that the
+ * third bank's PLL is established before we
+ * start the second bank which shares the third
+ * bank's PLL.
+ */
+
+ if (idx == 1)
+ bank = FSL_SRDS_BANK_3;
+ else if (idx == 2)
+ bank = FSL_SRDS_BANK_2;
+ }
+#endif
+
/* Skip disabled banks */
if (!have_bank[bank])
continue;
+#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
+ if (!IS_SVR_REV(get_svr(), 1, 0)) {
+ if (idx == 1) {
+ p4080_erratum_serdes8(srds_regs, gur,
+ serdes8_devdisr,
+ serdes8_devdisr2, cfg);
+ } else if (idx == 2) {
+ enable_bank(gur, FSL_SRDS_BANK_2);
+ }
+ }
+#endif
+
/* reset banks for errata */
setbits_be32(&srds_regs->bank[bank].rstctl, SRDS_RSTCTL_RST);
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h
index 4e1f331..42d771e 100644
--- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h
@@ -37,4 +37,8 @@
int serdes_lane_enabled(int lane);
enum srds_prtcl serdes_get_prtcl(int cfg, int lane);
+#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
+extern uint16_t srds_lpd_b[SRDS_MAX_BANK];
+#endif
+
#endif /* __FSL_CORENET_SERDES_H */
diff --git a/arch/powerpc/cpu/mpc85xx/p4080_serdes.c b/arch/powerpc/cpu/mpc85xx/p4080_serdes.c
index eb6223c..87bd795 100644
--- a/arch/powerpc/cpu/mpc85xx/p4080_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/p4080_serdes.c
@@ -71,6 +71,10 @@
XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1},
};
+#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
+uint16_t srds_lpd_b[SRDS_MAX_BANK];
+#endif
+
enum srds_prtcl serdes_get_prtcl(int cfg, int lane)
{
if (!serdes_lane_enabled(lane))