mmc: tegra: don't use periph_id in pad_init_mmc()
The MMC driver will soon be converted to use standard clock/reset APIs,
and so the periph_id field in the MMC device priv struct will disappear.
Rework the implementation of pad_init_mmc() to rely on this; using the
device register address is a much more direct test anyway.
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
diff --git a/drivers/mmc/tegra_mmc.c b/drivers/mmc/tegra_mmc.c
index 5e6cfe7..4335431 100644
--- a/drivers/mmc/tegra_mmc.c
+++ b/drivers/mmc/tegra_mmc.c
@@ -451,14 +451,13 @@
static void pad_init_mmc(struct mmc_host *host)
{
#if defined(CONFIG_TEGRA30)
- enum periph_id id = host->mmc_id;
u32 val;
- debug("%s: sdmmc address = %08x, id = %d\n", __func__,
- (unsigned int)host->reg, id);
+ debug("%s: sdmmc address = %08x\n", __func__, (unsigned int)host->reg);
/* Set the pad drive strength for SDMMC1 or 3 only */
- if (id != PERIPH_ID_SDMMC1 && id != PERIPH_ID_SDMMC3) {
+ if (host->reg != (void *)0x78000000 &&
+ host->reg != (void *)0x78000400) {
debug("%s: settings are only valid for SDMMC1/SDMMC3!\n",
__func__);
return;