Fix coding style issues; update CHANGELOG.

Signed-off-by: Wolfgang Denk <wd@denx.de>
diff --git a/CHANGELOG b/CHANGELOG
index 015a4ac..ef5c7ea 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,3 +1,687 @@
+commit 467bcee11fe26ad422f2de971aa70866079870f2
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Fri Dec 14 15:36:18 2007 +0100
+
+    cfi_flash: Add manufacturer-specific fixups
+
+    Run fixups based on the JEDEC manufacturer ID independent of the
+    command set ID.
+
+    This changes current behaviour: Previously, geometry reversal for AMD
+    chips were done based on the command set ID, while they are now done
+    based on the JEDEC manufacturer and device ID.
+
+    Also add fixup for top-boot Atmel chips. A fixup is needed for
+    AT49BV6416(T) too, but since u-boot currently only reads the low byte
+    of the device ID, there's no way to tell it apart from AT49BV642D,
+    which should not have this fixup. Since AT49BV642D support is
+    necessary to get ATNGW100 board support into mainline, I've commented
+    out the fixup for now.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 0ddf06ddf6b4bd057ad4c5f0dffea7870ba06a2a
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Fri Dec 14 15:36:17 2007 +0100
+
+    cfi_flash: Add cmdset-specific init functions
+
+    Move things like reading JEDEC IDs and fixing up geometry reversal
+    into separate functions. The geometry reversal fixup is now performed
+    by altering the qry structure directly, which makes the sector init
+    code slightly cleaner.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit e23741f4a6d8047520ef0d4971762749b3587d32
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Fri Dec 14 15:36:16 2007 +0100
+
+    cfi_flash: Read whole QRY structure in one go
+
+    Read out the whole CFI Standard Query structure after successful cfi
+    identification. This allows subsequent code to access this information
+    directly without having to go through flash_read_uchar() and friends.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit df9c25ea04b38a0e05d4f8c73c5cc144cdafa7db
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Mon Dec 17 11:02:44 2007 +0100
+
+    AVR32: Fix logic inversion in disable_interrupts()
+
+    disable_interrupts() should return nonzero if interrupts were
+    _enabled_ before, not disabled.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit acac475212cbedb17b321a363a1c878e2b47b37f
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Fri Dec 14 16:51:22 2007 +0100
+
+    AVR32: Enable interrupts at bootup
+
+    The timer code depends on the timer interrupt to keep track of the
+    upper 32 bits of the cycle counter. This obviously doesn't work when
+    interrupts are disabled the whole time.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 9570bcd87f4db255514f43b6701746c412f8fef0
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Thu Nov 15 10:03:45 2007 +0100
+
+    AVR32: Fix wrong pin setup for USART3
+
+    As reported by Gerhard Berghofer:
+
+    in "gpio_enable_usart3" the correct pins for USART 3 are PB17 and PB18
+    instead of PB18 and PB19.
+
+    which is obviously correct. There's currently no code that uses
+    USART3, but custom boards may run into problems.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 09ea0de03dcc3ee7af045b0b572227bda2c1c918
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Thu Nov 1 12:44:20 2007 +0100
+
+    README: Remove ATSTK1000 daughterboard list
+
+    As noted by Kim Phillips, these lists tend to become out of date.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit c81cbbad21cb0ae983e2e796211202234cdc8be2
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Tue Oct 30 14:56:36 2007 +0100
+
+    Add ATSTK100[234] to MAINTAINERS
+
+    Add all the ATSTK1000 daughterboards to MAINTAINERS along with their
+    "mother". Also update the entry for ATSTK1000 to be not only about the
+    AP7000 CPU; it's intended to handle all CPUs in the AT32AP family.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 64ff2357b1727213803591813dbc779c924bf772
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Mon Oct 29 13:02:54 2007 +0100
+
+    AVR32: Add support for the ATSTK1004 board
+
+    ATSTK1004 is a daughterboard for ATSTK1000 with the AT32AP7002 CPU,
+    which is a derivative of AT32AP7000.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 667568db157f374b85abd7e03596ddd1f0b25681
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Mon Oct 29 13:02:54 2007 +0100
+
+    AVR32: Add support for the ATSTK1003 board
+
+    ATSTK1003 is a daughterboard for ATSTK1000 with the AT32AP7001 CPU,
+    which is a derivative of AT32AP7000.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 5fee84a794a51ec830548cda485a770efb018b92
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Mon Oct 29 13:23:33 2007 +0100
+
+    AVR32: Make some AT32AP700x peripherals optional
+
+    Add a chip-features file providing definitions of the form
+
+    AT32AP700x_CHIP_HAS_<peripheral>
+
+    to indicate the availability of the given peripheral on the currently
+    selected chip.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 36f28f8a9605ee5dcfa330482cfc62171261af97
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Mon Oct 29 13:09:56 2007 +0100
+
+    AVR32: Rename at32ap7000 -> at32ap700x
+
+    The SoC-specific code for all the AT32AP700x CPUs is practically
+    identical; the only difference is that some chips have less features
+    than others. By doing this rename, we can add support for the AP7000
+    derivatives simply by making some features conditional.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 4d5fa99c73f354e7cf985efcf417ea55ca2f6a5e
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Fri Jun 29 18:22:34 2007 +0200
+
+    atmel_mci: Show SR when block read fails
+
+    Show controller status as well as card status when an error occurs
+    during block read.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 12d30aa79779c2aa7a998bbae4c075f822a53004
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Thu Dec 13 12:56:34 2007 +0100
+
+    cfi_flash: Use map_physmem() and unmap_physmem()
+
+    Use map_physmem() and unmap_physmem() to convert from physical to
+    virtual addresses. This gives the arch a chance to provide an uncached
+    mapping for flash accesses.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 4d7d6936eb29af7cca330937808312aa5f61454d
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Thu Dec 13 12:56:33 2007 +0100
+
+    Introduce map_physmem() and unmap_physmem()
+
+    map_physmem() returns a virtual address which can be used to access a
+    given physical address without involving the cache. unmap_physmem()
+    should be called when the virtual address returned by map_physmem() is
+    no longer needed.
+
+    This patch adds a stub implementation which simply returns the
+    physical address cast to a uchar * for all architectures except AVR32,
+    which converts the physical address to an uncached virtual mapping.
+    unmap_physmem() is a no-op on all architectures, but if any
+    architecture needs to do such mappings through the TLB, this is the
+    hook where those TLB entries can be invalidated.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit cdbaefb5f5f03e54455d0439dcf6dbd97ead1f9d
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Thu Dec 13 12:56:32 2007 +0100
+
+    cfi_flash: Introduce read and write accessors
+
+    Introduce flash_read{8,16,32,64) and flash_write{8,16,32,64} and use
+    them to access the flash memory. This makes it clearer when the flash
+    is actually being accessed; merely dereferencing a volatile pointer
+    looks just like any other kind of access.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 812711ce6b3a386125dcf0d6a59588e461abbb87
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Thu Dec 13 12:56:31 2007 +0100
+
+    Implement __raw_{read,write}[bwl] on all architectures
+
+    This adds implementations of __raw_read[bwl] and __raw_write[bwl] to
+    m68k, ppc, nios and nios2. The m68k and ppc implementations were taken
+    from Linux.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit be60a9021c82fc5aecd5b2b1fc96f70a9c81bbcd
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Sat Oct 6 18:55:36 2007 +0200
+
+    cfi_flash: Reorder functions and eliminate extra prototypes
+
+    Reorder the functions in cfi_flash.c so that each function only uses
+    functions that have been defined before it. This allows the static
+    prototype declarations near the top to be eliminated and might allow
+    gcc to do a better job inlining functions.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 3055793bcbdf24b1f8117f606ffb766d32eb766f
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Thu Dec 13 12:56:29 2007 +0100
+
+    cfi_flash: Make some needlessly global functions static
+
+    Make functions not declared in any header file static.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 7e5b9b471518c5652febc68ba62b432193d6abf4
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Thu Dec 13 12:56:28 2007 +0100
+
+    cfi_flash: Break long lines
+
+    This patch tries to keep all lines in the cfi_flash driver below 80
+    columns. There are a few lines left which don't fit this requirement
+    because I couldn't find any trivial way to break them (i.e. it would
+    take some restructuring, which I intend to do in a later patch.)
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 42026c9cb3a76849b41e6e24abfb7b56807a5c1a
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date:	Tue Dec 11 13:59:57 2007 +0100
+
+    CFI: synchronize command offsets with Linux CFI driver
+
+    Fixes non-working CFI Flash on the Inka4x0 board.
+
+    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 8ff3de61fc5f9b3b21647bce081a3b7f710f0d4d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Fri Dec 7 12:17:34 2007 -0600
+
+    Handle MPC85xx PCIe reset errata (PCI-Ex 38)
+
+    On the MPC85xx boards that have PCIe enable the PCIe errata fix.
+    (MPC8544DS, MPC8548CDS, MPC8568MDS).
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 82ac8c97145a4c3bf8b3dbfad00fa96e920f9b9c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Fri Dec 7 12:04:30 2007 -0600
+
+    Update Freescale MPC85xx ADS/CDS/MDS board config
+
+    * Enabled CONFIG_CMD_ELF
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit d435793229ce29a42797c1edc39f5b34f987f91a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Fri Dec 7 04:59:26 2007 -0600
+
+    Handle Asynchronous DDR clock on 85xx
+
+    The MPC8572 introduces the concept of an asynchronous DDR clock with
+    regards to the platform clock.
+
+    Introduce get_ddr_freq() to report the DDR freq regardless of sync/async
+    mode.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 22abb2d2eaf7b795a6923c6273ec9cb53fda9a10
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Thu Nov 29 10:34:28 2007 -0600
+
+    Update Freescale MPC85xx ADS/CDS/MDS board config
+
+    * Removed some misc environment setup
+    * Enabled CONFIG_CMDLINE_EDITING
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 415a613babb84d5e5d5b42e8e553868c71fc3a64
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Thu Nov 29 10:47:44 2007 -0600
+
+    Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale.
+
+    Minor path corrections needed to ensure buildability.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c2d943ffbfd3359b3b45d177b437379d2cb86fbf
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Thu Nov 29 10:16:18 2007 -0600
+
+    Move the MPC8540 ADS board under board/freescale.
+
+    Minor path corrections needed to ensure buildability.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 870ceac5b3a3486c109396e005af81ae762b5710
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Thu Nov 29 10:14:50 2007 -0600
+
+    Move the MPC8560 ADS board under board/freescale.
+
+    Minor path corrections needed to ensure buildability.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit acbca876fb3fec25cd9c55b0efc81ff618ff5262
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Thu Nov 29 10:13:47 2007 -0600
+
+    Move the MPC8568 MDS board under board/freescale.
+
+    Minor path corrections needed to ensure buildability.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a853d56c59b33415304531443633808736acfc6e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Thu Nov 29 02:18:59 2007 -0600
+
+    Use standard LAWAR_TRGT_IF_* defines for LAW setup on 85xx
+
+    We already had defines for LAWAR_TRGT_IF_* that we should use
+    rather than creating new ones.  Also, added some missing defines for
+    PCIE targets.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 04db400892da37b76a585e332a0c137954ad2015
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Thu Nov 29 02:10:09 2007 -0600
+
+    Stop using immap_t on 85xx
+
+    In the future the offsets to various blocks may not be in same location.
+    Move to using CFG_MPC85xx_*_ADDR as the base of the registers
+    instead of getting it via &immap.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2714223f8e04ab3e4133ff65872eef366d90bfea
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Thu Nov 29 01:23:09 2007 -0600
+
+    Remove CONFIG_OF_FLAT_TREE related code from mpc85xx since we now use libfdt
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c480861bf000156e6a3e932c258db59ff2212dd3
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Thu Nov 29 01:06:19 2007 -0600
+
+    Update MPC8568 MDS to use libfdt
+
+    Updated the MPC8568 MDS config to use libfdt and assume use of aliases for
+    ethernet, pci, and serial for the various fixups that are done.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 1563f56e0c68f6920f956382d6d13bee3f01c0f7
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date:	Wed Nov 14 15:52:06 2007 -0500
+
+    Add PCI Express support on MPC8568MDS
+
+    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit b90d25497625b90ffa3f2911a0895ca237556ff5
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Thu Nov 29 00:11:44 2007 -0600
+
+    Update MPC85xx CDS to use libfdt
+
+    Updated the MPC85xx CDS config to use libfdt and assume use of aliases for
+    ethernet, pci, and serial for the various fixups that are done.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0fd5ec66b10521a057ad73e69ab5f0f9eafba255
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Wed Nov 28 22:54:27 2007 -0600
+
+    Update MPC8540 ADS to use libfdt
+
+    Updated the MPC8540 ADS config to use libfdt and assume use of aliases for
+    ethernet, pci, and serial for the various fixups that are done.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 5ce715802f6c50dc78b3405b92f184b1e3710519
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Wed Nov 28 22:40:31 2007 -0600
+
+    Update MPC8560 ADS to use libfdt
+
+    Updated the MPC8560 ADS config to use libfdt and assume use of aliases for
+    ethernet, pci, and serial for the various fixups that are done.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit aafeefbdb8b029f5ca2a195598d0a501a606eea9
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Wed Nov 28 00:36:33 2007 -0600
+
+    Stop using immap_t for cpm offset on 85xx
+
+    In the future the offsets to various blocks may not be in same location.
+    Move to using CFG_MPC85xx_CPM_ADDR as the base of the CPM registers
+    instead of getting it via &immap->im_cpm.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f59b55a5b8fcadaa99781ba48e7a38e956afa527
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Nov 27 23:25:02 2007 -0600
+
+    Stop using immap_t for guts offset on 85xx
+
+    In the future the offsets to various blocks may not be in same location.
+    Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers
+    instead of getting it via &immap->im_gur.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 50c03c8cf494d91cdec39670d95337c743e16ec9
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Nov 27 22:42:34 2007 -0600
+
+    Update MPC8544 DS config
+
+    * Removed HAS_ETH2/HAS_ETH3 - MPC8544 only has TSEC1/2
+    * Removed some misc environment setup
+    * Moved to using fdtfile & fdtaddr as fdt env var names
+    * Enabled CONFIG_CMDLINE_EDITING
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit addce57e2e4c49e77ffb2020a84690713bb18b47
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Mon Nov 26 17:12:24 2007 -0600
+
+    Update MPC8544DS to use libfdt
+
+    Updated the MPC8544DS config to use libfdt and assume use of aliases for
+    ethernet, pci, and serial for the various fixups that are done.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f852ce72f100cabd1f11c21c085a0ad8eca9fb65
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Thu Nov 29 00:15:30 2007 -0600
+
+    Add libfdt based ft_cpu_setup for mpc85xx
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9692c2734a47f23b44a0f68042a3e2ca8d1bfb39
+Author: Stefan Roese <sr@denx.de>
+Date:	Sat Dec 8 08:25:09 2007 +0100
+
+    CFI: Coding style cleanup
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 81b20ccc2d795ae9a1199db5a50ad9c28d1e4d22
+Author: Michael Schwingen <michael@schwingen.org>
+Date:	Fri Dec 7 23:35:02 2007 +0100
+
+    CFI: support JEDEC flash roms in CFI-flash framework
+
+    The following patch adds support for non-CFI flash ROMS, by hooking into the
+    CFI flash code and using most of its code, as recently discussed here in the
+    thread "Mixing CFI and non-CFI flashs".
+
+    Signed-off-by: Michael Schwingen <michael@schwingen.org>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c01b17dd856fa120b2970f50d9598546a4927ec3
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date:	Wed Nov 28 21:24:50 2007 -0500
+
+    Conditionally compile fdt_fixup_ethernet()
+
+    Fix compiler warnings: On boards that don't have ethernets defined,
+    don't compile fdt_fixup_ethernet().
+
+commit 246d4ae6bc282bc1841224e1c5fc49dc925e0bf7
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Nov 27 21:59:46 2007 -0600
+
+    Convert boards that set memory node to use fdt_fixup_memory()
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 151c8b09b35eebe8fd9139cb6c1d91c27b22f058
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Mon Nov 26 17:06:15 2007 -0600
+
+    Added fdt_fixup_stdout that uses aliases to set linux,stdout-path
+
+    We use a combination of the serialN alias and CONFIG_CONS_INDEX to
+    determine which serial alias we should set linux,stdout-path to.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 3c9272813fad84c691d0e4989bb18a3ffebdebfc
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Mon Nov 26 14:57:45 2007 -0600
+
+    Add common memory fixup function
+
+    Add the function fdt_fixup_memory() to fixup the /memory node of the fdt
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9c9109e7fcf7ac2ca19c95b8ac54b8d1c773b157
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Mon Nov 26 11:19:12 2007 -0600
+
+    Conditionally compile fdt_support.c
+
+    Modify common/Makefile to conditionally compile fdt_support.c based
+    on CONFIG_OF_LIBFDT.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit d88e7ba0980773479e1a64badb293116071b7ef0
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Mon Nov 26 10:41:40 2007 -0600
+
+    Fix build breakage due to libfdt import
+
+    The IDS8247 got lost in the update and need an API update
+    do to rename of functions in libfdt.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 28f384b171bbf1fb2dafb1046e6d259a6b2f8714
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date:	Fri Nov 23 19:43:20 2007 -0500
+
+    Add spaces around the = in the fdt print format.
+
+    Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 29592ecba3b932b9b152bcec6c0c0806412db4a3
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Fri Dec 7 01:25:38 2007 +0900
+
+    sh: Moved driver of the SuperH dependence
+
+    The composition of the directory in the drivers/ changed.
+    I moved SuperH serial driver and marubun PCMCIA driver.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 41be969f4957115ed7b1fe8b890bfaee99d7a7a2
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Thu Dec 6 10:21:19 2007 +0100
+
+    Release v1.3.1
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit cf5933ba1e97a1cd8f5f24070e820f21d976eaeb
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Thu Dec 6 10:21:03 2007 +0100
+
+    ADS5121 Board: fix compile problem.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 8d4f040a3c15036a6ea25a9c39e7d89fefa8440d
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Mon Dec 3 00:15:28 2007 +0100
+
+    Prepare for 1.3.1-rc1
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 260eea5676ca46903a335686cc020b29c4ca46fe
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Thu Nov 29 01:21:54 2007 +0900
+
+    sh: Add SuperH boards maintainer to MAINTAINERS file
+
+    Add MS7750SE and MS7722SE's board maintainer to MAINTAINERS file.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit aa9c4f1d22701a92347c1c81f34d12c8ad3a3747
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Thu Nov 29 00:13:04 2007 +0900
+
+    sh: Add ms7750se support in MAKEALL
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit c7144373427a178332bf9754131c8c34c52c200a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Tue Nov 27 09:44:53 2007 +0100
+
+    sh: Add sh3 and sh4 support in MAKEALL
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 130080874a3d28450098481a262c5f7c855e908d
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Sun Nov 25 02:51:17 2007 +0900
+
+    sh: Add document for SuperH.
+
+    This document is a summary of information concerning SuperH of U-Boot.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 33ecdc2f9d64926e1a6067b28f3a0aefc3b6d23d
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Sun Nov 25 02:39:31 2007 +0900
+
+    sh: Add marubun's pcmcia driver
+
+    Marubun pcmcia is a chip for PCMCIA used with SuperH.
+    Of course, this can be used even by other architectures.
+    When use this driver, came to be able to use CompactFlash
+    and Ethernet.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit febd86b969b975289ed948f1ac0eb9722da41ced
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Sun Nov 25 02:32:13 2007 +0900
+
+    sh: Update SuperH SCIF driver
+
+    - Changed volatile unsigned to vu_.
+    - Changed Makefile for kconfig.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
 commit a5f601fd1b1278deae5aa9fc27a232b0d1c1c788
 Author: Wolfgang Denk <wd@denx.de>
 Date:	Mon Nov 26 19:18:21 2007 +0100
@@ -1927,6 +2611,56 @@
 
     synchronizition with mainline
 
+commit eda3e1e6619ad0bee94ae4b16c99d88e77e2af13
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Sun Sep 23 02:42:38 2007 +0900
+
+    sh: Add support command of ide with sh
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit d91ea45d15cf8e0987456bd211ffbb650824b6f1
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Sun Sep 23 02:38:42 2007 +0900
+
+    sh: Update Makefile
+
+    Add support MS7722SE01 to Makefile.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 6c0bbdccd379f5c8702af9e0765294c2fb7472a6
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Sun Sep 23 02:31:13 2007 +0900
+
+    sh: Add support Renesas sh7722 processor and Hitachi MS7722SE01 board
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 047375bfa4c3052fa50a748da7ff89e9dad3b364
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Sun Sep 23 02:19:24 2007 +0900
+
+    sh: Update MS7750SE01 platform
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 516ad760db3553766267ada01b7d5d727faa4bbd
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Sun Sep 23 02:17:08 2007 +0900
+
+    sh: Remove comment out code from include/asm-sh/cpu_sh4.h
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit b02bad128669e567fce87d8df823b06a0144b8db
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Sun Sep 23 02:12:30 2007 +0900
+
+    sh: Update core code of SuperH.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
 commit 66dcad3a9a53e0766d90e0084123bd8529522fb0
 Author: Wolfgang Denk <wd@denx.de>
 Date:	Thu Sep 20 00:04:14 2007 +0200
@@ -8634,6 +9368,24 @@
 
      Fix to compile JSE against 20070514 git of u-boot
 
+commit 69df3c4da0c93017cceb25a366e794570bd0ed98
+Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
+Date:	Sun May 13 21:01:03 2007 +0900
+
+    sh: MS7750SE support.
+
+    This adds support for the Hitachi MS7750SE.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 0b135cfc2e524dc249b75057b55dd4cc09842e27
+Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
+Date:	Sun May 13 20:58:00 2007 +0900
+
+    sh: First support code of SuperH.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
 commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
 Author: Stefan Roese <sr@denx.de>
 Date:	Fri May 11 12:01:49 2007 +0200