Various, unrelated tree-wide typo fixes.
Fix a number of typos, including:
* "compatble" -> "compatible"
* "eanbeld" -> "enabled"
* "envrionment" -> "environment"
* "FTD" -> "FDT" (for "flattened device tree")
* "ommitted" -> "omitted"
* "overriden" -> "overridden"
* "partiton" -> "partition"
* "propogate" -> "propagate"
* "resourse" -> "resource"
* "rest in piece" -> "rest in peace"
* "suport" -> "support"
* "varible" -> "variable"
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
diff --git a/arch/arm/cpu/armv7/Kconfig b/arch/arm/cpu/armv7/Kconfig
index afeaac8..bd6108e 100644
--- a/arch/arm/cpu/armv7/Kconfig
+++ b/arch/arm/cpu/armv7/Kconfig
@@ -21,7 +21,7 @@
Say Y here to boot in secure mode by default even if non-secure mode
is supported. This option is useful to boot kernels which do not
suppport booting in non-secure mode. Only set this if you need it.
- This can be overriden at run-time by setting the bootm_boot_mode env.
+ This can be overridden at run-time by setting the bootm_boot_mode env.
variable to "sec" or "nonsec".
config ARMV7_VIRT
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3 b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3
index da5e052..7867c37 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3
+++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3
@@ -128,7 +128,7 @@
during U-boot booting.However the MC, DPC and DPL can be applied from
console independently.
The variable needs to be set from the console once and then on
- rebooting the parameters set in the varible will automatically be
+ rebooting the parameters set in the variable will automatically be
executed. The commmand is demostrated taking an example of mc boot
using NOR Flash i.e. MC, DPL, and DPC is stored in the NOR flash:
diff --git a/arch/arm/cpu/armv8/zynqmp/mp.c b/arch/arm/cpu/armv8/zynqmp/mp.c
index 58312a7..e10fc31 100644
--- a/arch/arm/cpu/armv8/zynqmp/mp.c
+++ b/arch/arm/cpu/armv8/zynqmp/mp.c
@@ -128,7 +128,7 @@
writel(tmp, &crlapb_base->cpu_r5_ctrl);
/* Give some delay for clock
- * to propogate */
+ * to propagate */
udelay(0x500);
}
diff --git a/arch/arm/imx-common/ddrmc-vf610.c b/arch/arm/imx-common/ddrmc-vf610.c
index daf3c7e..9bc56f6 100644
--- a/arch/arm/imx-common/ddrmc-vf610.c
+++ b/arch/arm/imx-common/ddrmc-vf610.c
@@ -212,7 +212,7 @@
cr_setting++;
}
- /* perform default PHY settings (may be overriden by custom settings */
+ /* perform default PHY settings (may be overridden by custom settings */
phy_setting = default_phy_settings;
while (phy_setting->phy_rnum >= 0) {
writel(phy_setting->setting,
diff --git a/arch/arm/include/asm/arch-tegra/board.h b/arch/arm/include/asm/arch-tegra/board.h
index 783bb3c..a3db7ed 100644
--- a/arch/arm/include/asm/arch-tegra/board.h
+++ b/arch/arm/include/asm/arch-tegra/board.h
@@ -20,7 +20,7 @@
/*
* Hooks to allow boards to set up the pinmux for a specific function.
* Has to be implemented in the board files as we don't yet support pinmux
- * setup from FTD. If a board file does not implement one of those functions
+ * setup from FDT. If a board file does not implement one of those functions
* an empty stub function will be called.
*/
diff --git a/arch/arm/include/asm/arch-tegra/clock.h b/arch/arm/include/asm/arch-tegra/clock.h
index e56031d..7daf8bc 100644
--- a/arch/arm/include/asm/arch-tegra/clock.h
+++ b/arch/arm/include/asm/arch-tegra/clock.h
@@ -324,7 +324,7 @@
* @param p post divider(DIVP)
* @param cpcon base PLL charge pump(CPCON)
* @return 0 if ok, -1 on error (the requested PLL is incorrect and cannot
- * be overriden), 1 if PLL is already correct
+ * be overridden), 1 if PLL is already correct
*/
int clock_set_rate(enum clock_id clkid, u32 n, u32 m, u32 p, u32 cpcon);
diff --git a/arch/arm/include/asm/arch-tegra124/display.h b/arch/arm/include/asm/arch-tegra124/display.h
index ca6644a..c522faa 100644
--- a/arch/arm/include/asm/arch-tegra124/display.h
+++ b/arch/arm/include/asm/arch-tegra124/display.h
@@ -11,7 +11,7 @@
/**
* Register a new display based on device tree configuration.
*
- * The frame buffer can be positioned by U-Boot or overriden by the fdt.
+ * The frame buffer can be positioned by U-Boot or overridden by the fdt.
* You should pass in the U-Boot address here, and check the contents of
* struct fdt_disp_config to see what was actually chosen.
*
diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c
index c50d56d..36eabc8 100644
--- a/arch/arm/mach-tegra/clock.c
+++ b/arch/arm/mach-tegra/clock.c
@@ -510,7 +510,7 @@
* @param p post divider(DIVP)
* @param cpcon base PLL charge pump(CPCON)
* @return 0 if ok, -1 on error (the requested PLL is incorrect and cannot
- * be overriden), 1 if PLL is already correct
+ * be overridden), 1 if PLL is already correct
*/
int clock_set_rate(enum clock_id clkid, u32 n, u32 m, u32 p, u32 cpcon)
{