* Patches by Reinhard Meyer, 14 Feb 2004:
- update board/emk tree; use common flash driver
- Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c
[adapted for other PPC CPUs -- wd]
- Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c
* Patch by Jon Diekema, 13 Feb 2004:
Call show_boot_progress() whenever POST "FAILED" is printed.
* Patch by Nishant Kamat, 13 Feb 2004:
Add support for TI OMAP1610 H2 Board
Fixes for cpu/arm926ejs/interrupt.c
(based on Richard Woodruff's patch for arm925, 16 Oct 03)
Fix for a timer bug in OMAP1610 Innovator
Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2
* Patches by Stephan Linz, 12 Feb 2004:
- add support for NIOS timer with variable period preload counter value
- prepare POST framework support for NIOS targets
* Patch by Denis Peter, 11 Feb 2004:
add POST support for the MIP405 board
diff --git a/CHANGELOG b/CHANGELOG
index 13516de..c7b673d 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,29 @@
Changes for U-Boot 1.0.2:
======================================================================
+* Patches by Reinhard Meyer, 14 Feb 2004:
+ - update board/emk tree; use common flash driver
+ - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c
+ [adapted for other PPC CPUs -- wd]
+ - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c
+
+* Patch by Jon Diekema, 13 Feb 2004:
+ Call show_boot_progress() whenever POST "FAILED" is printed.
+
+* Patch by Nishant Kamat, 13 Feb 2004:
+ Add support for TI OMAP1610 H2 Board
+ Fixes for cpu/arm926ejs/interrupt.c
+ (based on Richard Woodruff's patch for arm925, 16 Oct 03)
+ Fix for a timer bug in OMAP1610 Innovator
+ Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2
+
+* Patches by Stephan Linz, 12 Feb 2004:
+ - add support for NIOS timer with variable period preload counter value
+ - prepare POST framework support for NIOS targets
+
+* Patch by Denis Peter, 11 Feb 2004:
+ add POST support for the MIP405 board
+
* Patch by Laurent Mohin, 10 Feb 2004:
Fix buffer overflow in common/usb.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 9e183f0..f23d9e2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -187,6 +187,9 @@
EBONY PPC440GP
+Tolunay Orkun <torkun@nextio.com>
+ csb272 PPC4xx
+
Keith Outwater <Keith_Outwater@mvis.com>
GEN860T MPC860T
@@ -307,9 +310,14 @@
trab ARM920T
Kshitij Gupta <kshitij@ti.com>
+
omap1510inn ARM925T
omap1610inn ARM926EJS
+Nishant Kamat <nskamat@ti.com>
+
+ omap1610h2 ARM926EJS
+
David Müller <d.mueller@elsoft.ch>
smdk2410 ARM920T
diff --git a/MAKEALL b/MAKEALL
index 0705488..bcf8904 100644
--- a/MAKEALL
+++ b/MAKEALL
@@ -135,7 +135,7 @@
#########################################################################
LIST_ARM9=" \
- at91rm9200dk omap1510inn omap1610inn \
+ at91rm9200dk omap1510inn omap1610h2 omap1610inn \
smdk2400 smdk2410 trab \
VCMA9 \
"
diff --git a/Makefile b/Makefile
index 1520f57..9eebf9c 100644
--- a/Makefile
+++ b/Makefile
@@ -912,11 +912,25 @@
xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1))))
+xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1)))
+
omap1510inn_config : unconfig
@./mkconfig $(@:_config=) arm arm925t omap1510inn
-omap1610inn_config : unconfig
- @./mkconfig $(@:_config=) arm arm926ejs omap1610inn
+omap1610inn_config \
+omap1610inn_cs0boot_config \
+omap1610inn_cs3boot_config \
+omap1610h2_config \
+omap1610h2_cs0boot_config \
+omap1610h2_cs3boot_config : unconfig
+ @if [ "$(findstring _cs0boot_, $@)" ] ; then \
+ echo "#define CONFIG_CS0_BOOT" >> ./include/config.h ; \
+ echo "Configured for CS0 boot"; \
+ else \
+ echo "#define CONFIG_CS3_BOOT" >> ./include/config.h ; \
+ echo "Configured for CS3 boot"; \
+ fi;
+ @./mkconfig -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn
smdk2400_config : unconfig
@./mkconfig $(@:_config=) arm arm920t smdk2400
diff --git a/README b/README
index 2c56820..3631f01 100644
--- a/README
+++ b/README
@@ -219,7 +219,7 @@
- board/omap1510inn
Files specific to OMAP 1510 Innovator boards
- board/omap1610inn
- Files specific to OMAP 1610 Innovator boards
+ Files specific to OMAP 1610 Innovator and H2 boards
- board/pcippc2 Files specific to PCIPPC2/PCIPPC6 boards
- board/pm826 Files specific to PM826 boards
- board/ppmc8260
@@ -375,11 +375,12 @@
ARM based boards:
-----------------
- CONFIG_HHP_CRADLE, CONFIG_DNP1110, CONFIG_EP7312,
- CONFIG_IMPA7, CONFIG_LART, CONFIG_LUBBOCK,
- CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610
- CONFIG_SHANNON, CONFIG_SMDK2400, CONFIG_SMDK2410,
- CONFIG_TRAB, CONFIG_VCMA9, CONFIG_AT91RM9200DK
+ CONFIG_HHP_CRADLE, CONFIG_DNP1110, CONFIG_EP7312,
+ CONFIG_IMPA7, CONFIG_LART, CONFIG_LUBBOCK,
+ CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610,
+ CONFIG_H2_OMAP1610, CONFIG_SHANNON, CONFIG_SMDK2400,
+ CONFIG_SMDK2410, CONFIG_TRAB, CONFIG_VCMA9,
+ CONFIG_AT91RM9200DK
- CPU Module Type: (if CONFIG_COGENT is defined)
@@ -1465,6 +1466,10 @@
14 common/cmd_bootm.c No initial ramdisk, no multifile, continue.
15 common/cmd_bootm.c All preparation done, transferring control to OS
+ -30 lib_ppc/board.c Fatal error, hang the system
+ -31 post/post.c POST test failed, detected by post_output_backlog()
+ -32 post/post.c POST test failed, detected by post_run_single()
+
-1 common/cmd_doc.c Bad usage of "doc" command
-1 common/cmd_doc.c No boot device
-1 common/cmd_doc.c Unknown Chip ID on boot device
@@ -2039,7 +2044,7 @@
at91rm9200dk_config omap1510inn_config MPC8260ADS_config
omap1610inn_config ZPC1900_config MPC8540ADS_config
MPC8560ADS_config QS850_config QS823_config
- QS860T_config DUET_ADS_config
+ QS860T_config DUET_ADS_config omap1610h2_config
Note: for some board special configuration names may exist; check if
additional information is available from the board vendor; for
diff --git a/board/emk/common/flash.c b/board/emk/common/flash.c
index b2a2138..adfa9a0 100644
--- a/board/emk/common/flash.c
+++ b/board/emk/common/flash.c
@@ -28,15 +28,33 @@
flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
-typedef unsigned char FLASH_PORT_WIDTH;
-typedef volatile unsigned char FLASH_PORT_WIDTHV;
-#define FLASH_ID_MASK 0xFF
+#if defined (CONFIG_TOP860)
+ typedef unsigned short FLASH_PORT_WIDTH;
+ typedef volatile unsigned short FLASH_PORT_WIDTHV;
+ #define FLASH_ID_MASK 0xFF
-#define FPW FLASH_PORT_WIDTH
-#define FPWV FLASH_PORT_WIDTHV
+ #define FPW FLASH_PORT_WIDTH
+ #define FPWV FLASH_PORT_WIDTHV
-#define FLASH_CYCLE1 0x0aaa
-#define FLASH_CYCLE2 0x0555
+ #define FLASH_CYCLE1 0x0555
+ #define FLASH_CYCLE2 0x02aa
+ #define FLASH_ID1 0
+ #define FLASH_ID2 1
+#endif
+
+#if defined (CONFIG_TOP5200)
+ typedef unsigned char FLASH_PORT_WIDTH;
+ typedef volatile unsigned char FLASH_PORT_WIDTHV;
+ #define FLASH_ID_MASK 0xFF
+
+ #define FPW FLASH_PORT_WIDTH
+ #define FPWV FLASH_PORT_WIDTHV
+
+ #define FLASH_CYCLE1 0x0aaa
+ #define FLASH_CYCLE2 0x0555
+ #define FLASH_ID1 0
+ #define FLASH_ID2 2
+#endif
/*-----------------------------------------------------------------------
* Functions
@@ -179,12 +197,33 @@
printf (" Sector Start Addresses:");
for (i=0; i<info->sector_count; ++i) {
+ ulong size;
+ int erased;
+ ulong *flash = (unsigned long *) info->start[i];
+
if ((i % 5) == 0) {
printf ("\n ");
}
- printf (" %08lX%s", info->start[i],
- info->protect[i] ? " (RO)" : " ");
+ /*
+ * Check if whole sector is erased
+ */
+ size =
+ (i != (info->sector_count - 1)) ?
+ (info->start[i + 1] - info->start[i]) >> 2 :
+ (info->start[0] + info->size - info->start[i]) >> 2;
+
+ for (
+ flash = (unsigned long *) info->start[i], erased = 1;
+ (flash != (unsigned long *) info->start[i] + size) && erased;
+ flash++
+ )
+ erased = *flash == ~0x0UL;
+
+ printf (" %08lX %s %s",
+ info->start[i],
+ erased ? "E": " ",
+ info->protect[i] ? "(RO)" : " ");
}
printf ("\n");
@@ -212,7 +251,7 @@
* This works for any bus width and any FLASH device width.
*/
udelay(100);
- switch (addr[0] & 0xff) {
+ switch (addr[FLASH_ID1] & 0xff) {
case (uchar)AMD_MANUFACT:
info->flash_id = FLASH_MAN_AMD;
@@ -225,7 +264,7 @@
#endif
default:
- printf ("unknown vendor=%x ", addr[0] & 0xff);
+ printf ("unknown vendor=%x ", addr[FLASH_ID1] & 0xff);
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->size = 0;
@@ -233,7 +272,7 @@
}
/* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */
- if (info->flash_id != FLASH_UNKNOWN) switch ((FPW)addr[2]) {
+ if (info->flash_id != FLASH_UNKNOWN) switch ((FPW)addr[FLASH_ID2]) {
case (FPW)AMD_ID_LV160B:
info->flash_id += FLASH_AM160B;
@@ -255,7 +294,7 @@
break;
default:
- printf ("unknown AMD device=%x ", (FPW)addr[2]);
+ printf ("unknown AMD device=%x ", (FPW)addr[FLASH_ID2]);
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->size = 0;
diff --git a/board/emk/top5200/Makefile b/board/emk/top5200/Makefile
index eb5ed59..986608b 100644
--- a/board/emk/top5200/Makefile
+++ b/board/emk/top5200/Makefile
@@ -26,7 +26,7 @@
LIB = lib$(BOARD).a
-OBJS := $(BOARD).o flash.o
+OBJS := $(BOARD).o ../common/flash.o ../common/vpd.o ../common/am79c874.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
diff --git a/board/emk/top5200/flash.c b/board/emk/top5200/flash.c
deleted file mode 100644
index 216bce3..0000000
--- a/board/emk/top5200/flash.c
+++ /dev/null
@@ -1,502 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2003
- * Reinhard Meyer, EMK Elektronik GmbH, r.meyer@emk-elektronik.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-typedef unsigned char FLASH_PORT_WIDTH;
-typedef volatile unsigned char FLASH_PORT_WIDTHV;
-#define FLASH_ID_MASK 0xFF
-
-#define FPW FLASH_PORT_WIDTH
-#define FPWV FLASH_PORT_WIDTHV
-
-#define FLASH_CYCLE1 0x0aaa
-#define FLASH_CYCLE2 0x0555
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size(FPWV *addr, flash_info_t *info);
-static void flash_reset(flash_info_t *info);
-static int write_word_amd(flash_info_t *info, FPWV *dest, FPW data);
-static flash_info_t *flash_get_info(ulong base);
-
-/*-----------------------------------------------------------------------
- * flash_init()
- *
- * sets up flash_info and returns size of FLASH (bytes)
- */
-unsigned long flash_init (void)
-{
- unsigned long size = 0;
- int i = 0;
- extern void flash_preinit(void);
- extern void flash_afterinit(uint, ulong, ulong);
- ulong flashbase = CFG_FLASH_BASE;
-
- flash_preinit();
-
- /* There is only ONE FLASH device */
- memset(&flash_info[i], 0, sizeof(flash_info_t));
- flash_info[i].size =
- flash_get_size((FPW *)flashbase, &flash_info[i]);
- size += flash_info[i].size;
-
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
- /* monitor protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE+monitor_flash_len-1,
- flash_get_info(CFG_MONITOR_BASE));
-#endif
-
-#ifdef CFG_ENV_IS_IN_FLASH
- /* ENV protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CFG_ENV_ADDR,
- CFG_ENV_ADDR+CFG_ENV_SIZE-1,
- flash_get_info(CFG_ENV_ADDR));
-#endif
-
-
- flash_afterinit(i, flash_info[i].start[0], flash_info[i].size);
- return size ? size : 1;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_reset(flash_info_t *info)
-{
- FPWV *base = (FPWV *)(info->start[0]);
-
- /* Put FLASH back in read mode */
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
- *base = (FPW)0x00FF00FF; /* Intel Read Mode */
- else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
- *base = (FPW)0x00F000F0; /* AMD Read Mode */
-}
-
-/*-----------------------------------------------------------------------
- */
-
-static flash_info_t *flash_get_info(ulong base)
-{
- int i;
- flash_info_t * info;
-
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i ++) {
- info = & flash_info[i];
- if (info->size &&
- info->start[0] <= base && base <= info->start[0] + info->size - 1)
- break;
- }
-
- return i == CFG_MAX_FLASH_BANKS ? 0 : info;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-void flash_print_info (flash_info_t *info)
-{
- int i;
- uchar *boottype;
- uchar *bootletter;
- uchar *fmt;
- uchar botbootletter[] = "B";
- uchar topbootletter[] = "T";
- uchar botboottype[] = "bottom boot sector";
- uchar topboottype[] = "top boot sector";
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD: printf ("AMD "); break;
-#if 0
- case FLASH_MAN_BM: printf ("BRIGHT MICRO "); break;
- case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
- case FLASH_MAN_SST: printf ("SST "); break;
- case FLASH_MAN_STM: printf ("STM "); break;
- case FLASH_MAN_INTEL: printf ("INTEL "); break;
-#endif
- default: printf ("Unknown Vendor "); break;
- }
-
- /* check for top or bottom boot, if it applies */
- if (info->flash_id & FLASH_BTYPE) {
- boottype = botboottype;
- bootletter = botbootletter;
- }
- else {
- boottype = topboottype;
- bootletter = topbootletter;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM160T:
- case FLASH_AM160B:
- fmt = "29LV160%s (16 Mbit, %s)\n";
- break;
- case FLASH_AMDLV065D:
- fmt = "29LV065 (64 Mbit, uniform sectors)\n";
- break;
- default:
- fmt = "Unknown Chip Type\n";
- break;
- }
-
- printf (fmt, bootletter, boottype);
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20,
- info->sector_count);
-
- printf (" Sector Start Addresses:");
-
- for (i=0; i<info->sector_count; ++i) {
- if ((i % 5) == 0) {
- printf ("\n ");
- }
-
- printf (" %08lX%s", info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
-
- printf ("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-ulong flash_get_size (FPWV *addr, flash_info_t *info)
-{
- int i;
- ulong offset;
-
- /* Write auto select command: read Manufacturer ID */
- /* Write auto select command sequence and test FLASH answer */
- addr[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* for AMD, Intel ignores this */
- addr[FLASH_CYCLE2] = (FPW)0x00550055; /* for AMD, Intel ignores this */
- addr[FLASH_CYCLE1] = (FPW)0x00900090; /* selects Intel or AMD */
-
- /* The manufacturer codes are only 1 byte, so just use 1 byte.
- * This works for any bus width and any FLASH device width.
- */
- udelay(100);
- switch (addr[0] & 0xff) {
-
- case (uchar)AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
-
-#if 0
- case (uchar)INTEL_MANUFACT:
- info->flash_id = FLASH_MAN_INTEL;
- break;
-#endif
-
- default:
- printf ("unknown vendor=%x ", addr[0] & 0xff);
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- break;
- }
-
- /* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */
- if (info->flash_id != FLASH_UNKNOWN) switch ((FPW)addr[2]) {
-
- case (FPW)AMD_ID_LV160B:
- info->flash_id += FLASH_AM160B;
- info->sector_count = 35;
- info->size = 0x00200000;
-#ifdef CFG_LOWBOOT
- offset = 0;
-#else
- offset = 0x00e00000;
-#endif
- info->start[0] = (ulong)addr + offset;
- info->start[1] = (ulong)addr + offset + 0x4000;
- info->start[2] = (ulong)addr + offset + 0x6000;
- info->start[3] = (ulong)addr + offset + 0x8000;
- for (i = 4; i < info->sector_count; i++)
- {
- info->start[i] = (ulong)addr + offset + 0x10000 * (i-3);
- }
- break;
-
- case (FPW)AMD_ID_LV065D:
- info->flash_id += FLASH_AMDLV065D;
- info->sector_count = 128;
- info->size = 0x00800000;
-#ifdef CFG_LOWBOOT
- offset = 0;
-#else
- offset = 0x00800000;
-#endif
- for( i = 0; i < info->sector_count; i++ )
- info->start[i] = (ulong)addr + offset + (i * 0x10000);
- break; /* => 8 or 16 MB */
-
- default:
- printf ("unknown AMD device=%x ", (FPW)addr[2]);
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* => no or unknown flash */
- }
-
- /* Put FLASH back in read mode */
- flash_reset(info);
-
- return (info->size);
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- FPWV *addr;
- int flag, prot, sect;
- int intel = (info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL;
- ulong start, now, last;
- int rcode = 0;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AMDLV065D:
- break;
- case FLASH_UNKNOWN:
- default:
- printf ("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- last = get_timer(0);
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last && rcode == 0; sect++) {
-
- if (info->protect[sect] != 0) /* protected, skip it */
- continue;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr = (FPWV *)(info->start[sect]);
- if (intel) {
- *addr = (FPW)0x00500050; /* clear status register */
- *addr = (FPW)0x00200020; /* erase setup */
- *addr = (FPW)0x00D000D0; /* erase confirm */
- }
- else {
- /* must be AMD style if not Intel */
- FPWV *base; /* first address in bank */
-
- base = (FPWV *)(info->start[0]);
- base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */
- base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */
- base[FLASH_CYCLE1] = (FPW)0x00800080; /* erase mode */
- base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */
- base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */
- *addr = (FPW)0x00300030; /* erase sector */
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- start = get_timer(0);
-
- /* wait at least 50us for AMD, 80us for Intel.
- * Let's wait 1 ms.
- */
- udelay (1000);
-
- while ((*addr & (FPW)0x00800080) != (FPW)0x00800080) {
- if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
-
- if (intel) {
- /* suspend erase */
- *addr = (FPW)0x00B000B0;
- }
-
- flash_reset(info); /* reset to read mode */
- rcode = 1; /* failed */
- break;
- }
-
- /* show that we're waiting */
- if ((get_timer(last)) > CFG_HZ) {/* every second */
- putc ('.');
- last = get_timer(0);
- }
- }
-
- /* show that we're waiting */
- if ((get_timer(last)) > CFG_HZ) { /* every second */
- putc ('.');
- last = get_timer(0);
- }
-
- flash_reset(info); /* reset to read mode */
- }
-
- printf (" done\n");
- return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- FPW data = 0; /* 16 or 32 bit word, matches flash bus width on MPC8XX */
- int bytes; /* number of bytes to program in current word */
- int left; /* number of bytes left to program */
- int i, res;
-
- for (left = cnt, res = 0;
- left > 0 && res == 0;
- addr += sizeof(data), left -= sizeof(data) - bytes) {
-
- bytes = addr & (sizeof(data) - 1);
- addr &= ~(sizeof(data) - 1);
-
- /* combine source and destination data so can program
- * an entire word of 16 or 32 bits
- */
- for (i = 0; i < sizeof(data); i++) {
- data <<= 8;
- if (i < bytes || i - bytes >= left )
- data += *((uchar *)addr + i);
- else
- data += *src++;
- }
-
- /* write one word to the flash */
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD:
- res = write_word_amd(info, (FPWV *)addr, data);
- break;
- default:
- /* unknown flash type, error! */
- printf ("missing or unknown FLASH type\n");
- res = 1; /* not really a timeout, but gives error */
- break;
- }
- }
-
- return (res);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash for AMD FLASH
- * A word is 16 or 32 bits, whichever the bus width of the flash bank
- * (not an individual chip) is.
- *
- * returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word_amd (flash_info_t *info, FPWV *dest, FPW data)
-{
- ulong start;
- int flag;
- int res = 0; /* result, assume success */
- FPWV *base; /* first address in flash bank */
-
- /* Check if Flash is (sufficiently) erased */
- if ((*dest & data) != data) {
- return (2);
- }
-
-
- base = (FPWV *)(info->start[0]);
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */
- base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */
- base[FLASH_CYCLE1] = (FPW)0x00A000A0; /* selects program mode */
-
- *dest = data; /* start programming the data */
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- start = get_timer (0);
-
- /* data polling for D7 */
- while (res == 0 && (*dest & (FPW)0x00800080) != (data & (FPW)0x00800080)) {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
- *dest = (FPW)0x00F000F0; /* reset bank */
- res = 1;
- }
- }
-
- return (res);
-}
diff --git a/board/emk/top5200/top5200.c b/board/emk/top5200/top5200.c
index 3969e2a..b65d2d0 100644
--- a/board/emk/top5200/top5200.c
+++ b/board/emk/top5200/top5200.c
@@ -156,53 +156,9 @@
int misc_init_r (void)
{
/* read 'factory' part of EEPROM */
- uchar buf[81];
- uchar *p;
- uint length;
- uint addr;
- uint len;
+ extern void read_factory_r (void);
+ read_factory_r ();
- /* get length first */
- addr = CFG_FACT_OFFSET;
- if (eeprom_read (CFG_I2C_FACT_ADDR, addr, buf, 2)) {
-bailout:
- printf ("cannot read factory configuration\n");
- printf ("be sure to set ethaddr yourself!\n");
- return 0;
- }
- length = buf[0] + (buf[1] << 8);
- addr += 2;
-
- /* sanity check */
- if (length < 20 || length > CFG_FACT_SIZE - 2)
- goto bailout;
-
- /* read lines */
- while (length > 0) {
- /* read one line */
- len = length > 80 ? 80 : length;
- if (eeprom_read (CFG_I2C_FACT_ADDR, addr, buf, len))
- goto bailout;
- /* mark end of buffer */
- buf[len] = 0;
- /* search end of line */
- for (p = buf; *p && *p != 0x0a; p++);
- if (!*p)
- goto bailout;
- *p++ = 0;
- /* advance to next line start */
- length -= p - buf;
- addr += p - buf;
- /*printf ("%s\n", buf); */
- /* search for our specific entry */
- if (!strncmp ((char *) buf, "[RLA/lan/Ethernet] ", 19)) {
- setenv ("ethaddr", buf + 19);
- } else if (!strncmp ((char *) buf, "[BOARD/SERIAL] ", 15)) {
- setenv ("serial#", buf + 15);
- } else if (!strncmp ((char *) buf, "[BOARD/TYPE] ", 13)) {
- setenv ("board_id", buf + 13);
- }
- }
return (0);
}
diff --git a/board/emk/top860/Makefile b/board/emk/top860/Makefile
index 13ce9fc..a74dd2f 100644
--- a/board/emk/top860/Makefile
+++ b/board/emk/top860/Makefile
@@ -25,7 +25,7 @@
LIB = lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+OBJS = $(BOARD).o ../common/flash.o ../common/vpd.o ../common/am79c874.o
$(LIB): .depend $(OBJS)
$(AR) crv $@ $(OBJS)
diff --git a/board/emk/top860/flash.c b/board/emk/top860/flash.c
deleted file mode 100644
index 0f827df..0000000
--- a/board/emk/top860/flash.c
+++ /dev/null
@@ -1,489 +0,0 @@
-/*
- * (C) Copyright 2003
- * EMK Elektronik GmbH <www.emk-elektronik.de>
- * Reinhard Meyer <r.meyer@emk-elektronik.de>
- *
- * copied from the BMW Port - seems that its similiar enough
- * to be easily adaped ;) --- Well, it turned out to become a
- * merger between parts of the EMKstax Flash routines and the
- * BMW funtion frames...
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-#define FLASH_WORD_SIZE unsigned short
-#define FLASH_WORD_WIDTH (sizeof (FLASH_WORD_SIZE))
-
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-
-
-/*****************************************************************************
- * software product ID entry/exit
- *****************************************************************************/
-static void FlashProductIdMode (
- volatile FLASH_WORD_SIZE *b,
- int on_off)
-{
- b[0x5555] = 0xaa;
- b[0x2aaa] = 0x55;
- b[0x5555] = on_off ? 0x90 : 0xf0;
-}
-
-/*****************************************************************************
- * sector erase start
- *****************************************************************************/
-static void FlashSectorErase (
- volatile FLASH_WORD_SIZE *b,
- volatile FLASH_WORD_SIZE *a)
-{
- b[0x5555] = 0xaa;
- b[0x2aaa] = 0x55;
- b[0x5555] = 0x80;
- b[0x5555] = 0xaa;
- b[0x2aaa] = 0x55;
- a[0] = 0x30;
-}
-
-/*****************************************************************************
- * program a word
- *****************************************************************************/
-static void FlashProgWord (
- volatile FLASH_WORD_SIZE *b,
- volatile FLASH_WORD_SIZE *a,
- FLASH_WORD_SIZE v)
-{
- b[0x5555] = 0xaa;
- b[0x2aaa] = 0x55;
- b[0x5555] = 0xa0;
- a[0] = v;
-}
-
-/*****************************************************************************
- * reset bank, back to read mode
- *****************************************************************************/
-static void FlashReset (volatile FLASH_WORD_SIZE *b)
-{
- b[0] = 0xf0;
-}
-
-/*****************************************************************************
- * identify FLASH chip
- * this code is a stripped version of the FlashGetType() function in EMKstax
- *****************************************************************************/
-unsigned long flash_init (void)
-{
- volatile FLASH_WORD_SIZE * const flash = (volatile FLASH_WORD_SIZE *) CFG_FLASH_BASE;
- FLASH_WORD_SIZE manu, dev;
- flash_info_t * const pflinfo = &flash_info[0];
- int j;
-
- /* get Id Bytes */
- FlashProductIdMode (flash, 1);
- manu = flash[0];
- dev = flash[1];
- FlashProductIdMode (flash, 0);
-
- pflinfo->size = 0;
- pflinfo->sector_count = 0;
- pflinfo->flash_id = 0xffffffff;
- pflinfo->portwidth = FLASH_CFI_16BIT;
- pflinfo->chipwidth = FLASH_CFI_BY16;
-
- switch (manu&0xff)
- {
- case 0x01: /* AMD */
- pflinfo->flash_id = FLASH_MAN_AMD;
- switch (dev&0xff)
- {
- case 0x49:
- pflinfo->size = 0x00200000;
- pflinfo->sector_count = 35;
- pflinfo->flash_id |= FLASH_AM160B;
- pflinfo->start[0] = CFG_FLASH_BASE;
- pflinfo->start[1] = CFG_FLASH_BASE + 0x4000;
- pflinfo->start[2] = CFG_FLASH_BASE + 0x6000;
- pflinfo->start[3] = CFG_FLASH_BASE + 0x8000;
- for (j = 4; j < 35; j++)
- {
- pflinfo->start[j] = CFG_FLASH_BASE + 0x00010000 * (j-3);
- }
- break;
-
- case 0xf9:
- pflinfo->size = 0x00400000;
- pflinfo->sector_count = 71;
- pflinfo->flash_id |= FLASH_AM320B;
- pflinfo->start[0] = CFG_FLASH_BASE;
- pflinfo->start[1] = CFG_FLASH_BASE + 0x4000;
- pflinfo->start[2] = CFG_FLASH_BASE + 0x6000;
- pflinfo->start[3] = CFG_FLASH_BASE + 0x8000;
- for (j = 0; j < 8; j++)
- {
- pflinfo->start[j] = CFG_FLASH_BASE + 0x00002000 * (j);
- }
- for (j = 8; j < 71; j++)
- {
- pflinfo->start[j] = CFG_FLASH_BASE + 0x00010000 * (j-7);
- }
- break;
-
- default:
- printf ("unknown AMD dev=%x ", dev);
- pflinfo->flash_id |= FLASH_UNKNOWN;
- }
- break;
-
- default:
- printf ("unknown manu=%x ", manu);
- }
- return pflinfo->size;
-}
-
-/*****************************************************************************
- * print info about a FLASH
- *****************************************************************************/
-void flash_print_info (flash_info_t *info)
-{
- static const char unk[] = "Unknown";
- unsigned int i;
- const char *mfct=unk,
- *type=unk;
-
- if(info->flash_id != FLASH_UNKNOWN)
- {
- switch (info->flash_id & FLASH_VENDMASK)
- {
- case FLASH_MAN_AMD:
- mfct = "AMD";
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK)
- {
- case FLASH_AM160B:
- type = "AM29LV160B (16 Mbit, bottom boot sect)";
- break;
- case FLASH_AM320B:
- type = "AM29LV320B (32 Mbit, bottom boot sect)";
- break;
- }
- }
-
- printf (
- "\n Brand: %s Type: %s\n"
- " Size: %lu KB in %d Sectors\n",
- mfct,
- type,
- info->size >> 10,
- info->sector_count
- );
-
- printf (" Sector Start Addresses:");
-
- for (i = 0; i < info->sector_count; i++)
- {
- unsigned long size;
- unsigned int erased;
- unsigned long *flash = (unsigned long *) info->start[i];
-
- /*
- * Check if whole sector is erased
- */
- size =
- (i != (info->sector_count - 1)) ?
- (info->start[i + 1] - info->start[i]) >> 2 :
- (info->start[0] + info->size - info->start[i]) >> 2;
-
- for (
- flash = (unsigned long *) info->start[i], erased = 1;
- (flash != (unsigned long *) info->start[i] + size) && erased;
- flash++
- )
- erased = *flash == ~0x0UL;
-
- printf (
- "%s %08lX %s %s",
- (i % 5) ? "" : "\n ",
- info->start[i],
- erased ? "E" : " ",
- info->protect[i] ? "RO" : " "
- );
- }
-
- puts ("\n");
- return;
-}
-
-/*****************************************************************************
- * erase one or more sectors
- *****************************************************************************/
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]);
- int flag,
- prot,
- sect,
- l_sect;
- ulong start,
- now,
- last;
-
- if ((s_first < 0) || (s_first > s_last))
- {
- if (info->flash_id == FLASH_UNKNOWN)
- {
- printf ("- missing\n");
- }
- else
- {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if ((info->flash_id == FLASH_UNKNOWN) ||
- (info->flash_id > (FLASH_MAN_STM | FLASH_AMD_COMP)))
- {
- printf ("Can't erase unknown flash type - aborted\n");
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect)
- {
- if (info->protect[sect])
- {
- prot++;
- }
- }
-
- if (prot)
- {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- }
- else
- {
- printf ("\n");
- }
-
- l_sect = -1;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++)
- {
- if (info->protect[sect] == 0)
- { /* not protected */
- FlashSectorErase ((FLASH_WORD_SIZE *)info->start[0], (FLASH_WORD_SIZE *)info->start[sect]);
- l_sect = sect;
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
-
- start = get_timer (0);
- last = start;
- addr = (FLASH_WORD_SIZE *)info->start[l_sect];
- while ((addr[0] & 0x0080) != 0x0080)
- {
- if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT)
- {
- printf ("Timeout\n");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000)
- { /* every second */
- serial_putc ('.');
- last = now;
- }
- }
-
- DONE:
- /* reset to read mode */
- FlashReset ((FLASH_WORD_SIZE *)info->start[0]);
-
- printf (" done\n");
- return 0;
-}
-
-/*****************************************************************************
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- *****************************************************************************/
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong cp,
- wp,
- data;
- int i,
- l,
- rc;
-
- wp = (addr & ~(FLASH_WORD_WIDTH-1)); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes, if there are...
- */
- if ((l = addr - wp) != 0)
- {
- data = 0;
-
- /* get the current before the new data into our data word */
- for (i=0, cp=wp; i<l; ++i, ++cp)
- {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- /* now merge the to be programmed values */
- for (; i<4 && cnt>0; ++i, ++cp, --cnt)
- {
- data = (data << 8) | *src++;
- }
-
- /* get the current after the new data into our data word */
- for (; cnt==0 && i<FLASH_WORD_WIDTH; ++i, ++cp)
- {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- /* now write the combined word */
- if ((rc = write_word (info, wp, data)) != 0)
- {
- return (rc);
- }
- wp += FLASH_WORD_WIDTH;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= FLASH_WORD_WIDTH)
- {
- data = 0;
- for (i=0; i<FLASH_WORD_WIDTH; ++i)
- {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word (info, wp, data)) != 0)
- {
- return (rc);
- }
- wp += FLASH_WORD_WIDTH;
- cnt -= FLASH_WORD_WIDTH;
- }
-
- if (cnt == 0)
- {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes, if there are...
- */
- data = 0;
-
- /* now merge the to be programmed values */
- for (i=0, cp=wp; i<FLASH_WORD_WIDTH && cnt>0; ++i, ++cp)
- {
- data = (data << 8) | *src++;
- --cnt;
- }
-
- /* get the current after the new data into our data word */
- for (; i<FLASH_WORD_WIDTH; ++i, ++cp)
- {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- /* now write the combined word */
- return (write_word (info, wp, data));
-}
-
-/*****************************************************************************
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- *****************************************************************************/
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
- volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)info->start[0];
- volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *)dest;
- FLASH_WORD_SIZE data2 = data;
- ulong start;
- int flag;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*dest2 & data2) != data2)
- {
- return (2);
- }
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- FlashProgWord (addr2, dest2, data2);
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-
- /* data polling for D7 */
- start = get_timer (0);
- while ((*dest2 & 0x0080) != (data2 & 0x0080))
- {
- if (get_timer (start) > CFG_FLASH_WRITE_TOUT)
- {
- return (1);
- }
- }
-
- return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/emk/top860/top860.c b/board/emk/top860/top860.c
index d13be98..931c0d1 100644
--- a/board/emk/top860/top860.c
+++ b/board/emk/top860/top860.c
@@ -120,58 +120,29 @@
}
/*****************************************************************************
+ * prepare for FLASH detection
+ *****************************************************************************/
+void flash_preinit(void)
+{
+}
+
+/*****************************************************************************
+ * finalize FLASH setup
+ *****************************************************************************/
+void flash_afterinit(uint bank, ulong start, ulong size)
+{
+}
+
+/*****************************************************************************
* otherinits after RAM is there and we are relocated to RAM
* note: though this is an int function, nobody cares for the result!
*****************************************************************************/
int misc_init_r (void)
{
/* read 'factory' part of EEPROM */
- uchar buf[81];
- uchar *p;
- uint length;
- uint addr;
- uint len;
+ extern void read_factory_r (void);
+ read_factory_r ();
- /* get length first */
- addr = CFG_FACT_OFFSET;
- if (eeprom_read (CFG_I2C_FACT_ADDR, addr, buf, 2)) {
- bailout:
- printf ("cannot read factory configuration\n");
- printf ("be sure to set ethaddr yourself!\n");
- return 0;
- }
- length = buf[0] + (buf[1] << 8);
- addr += 2;
-
- /* sanity check */
- if (length < 20 || length > CFG_FACT_SIZE - 2)
- goto bailout;
-
- /* read lines */
- while (length > 0) {
- /* read one line */
- len = length > 80 ? 80 : length;
- if (eeprom_read (CFG_I2C_FACT_ADDR, addr, buf, len))
- goto bailout;
- /* mark end of buffer */
- buf[len] = 0;
- /* search end of line */
- for (p = buf; *p && *p != 0x0a; p++);
- if (!*p)
- goto bailout;
- *p++ = 0;
- /* advance to next line start */
- length -= p - buf;
- addr += p - buf;
- /*printf ("%s\n", buf); */
- /* search for our specific entry */
- if (!strncmp ((char *) buf, "[RLA/lan/Ethernet] ", 19)) {
- setenv ("ethaddr", buf + 19);
- } else if (!strncmp ((char *) buf, "[BOARD/SERIAL] ", 15)) {
- setenv ("serial#", buf + 15);
- } else if (!strncmp ((char *) buf, "[BOARD/TYPE] ", 13)) {
- setenv ("board_id", buf + 13);
- }
- }
return (0);
}
+
diff --git a/board/mpl/mip405/mip405.c b/board/mpl/mip405/mip405.c
index 709e1a4..b1adde6 100644
--- a/board/mpl/mip405/mip405.c
+++ b/board/mpl/mip405/mip405.c
@@ -709,6 +709,18 @@
var, pcbrev + 'A', part & 0x7F, vers);
}
+
+#ifdef CONFIG_POST
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+ return 0; /* No hotkeys supported */
+}
+#endif
+
extern void mem_test_reloc(void);
extern int mk_date (char *, struct rtc_time *);
diff --git a/board/omap1610inn/omap1610innovator.c b/board/omap1610inn/omap1610innovator.c
index d737f1b..0f67a0c 100644
--- a/board/omap1610inn/omap1610innovator.c
+++ b/board/omap1610inn/omap1610innovator.c
@@ -10,6 +10,8 @@
* Texas Instruments, <www.ti.com>
* Kshitij Gupta <Kshitij@ti.com>
*
+ * Modified for OMAP 1610 H2 board by Nishant Kamat, Jan 2004
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
@@ -105,7 +107,28 @@
*************************************************************/
void ether__init (void)
{
-#define ETH_CONTROL_REG 0x0400000b
+#define ETH_CONTROL_REG 0x0400030b
+
+#ifdef CONFIG_H2_OMAP1610
+ #define LAN_RESET_REGISTER 0x0400001c
+
+ /* The debug board on which the lan chip resides may not be powered
+ * ON at the same time as the OMAP chip. So wait in a loop until the
+ * lan reset register (on the debug board) is available (powered on)
+ * and reset the lan chip.
+ */
+
+ *((volatile unsigned short *) LAN_RESET_REGISTER) = 0x0000;
+ do {
+ *((volatile unsigned short *) LAN_RESET_REGISTER) = 0x0001;
+ udelay (3);
+ } while (*((volatile unsigned short *) LAN_RESET_REGISTER) != 0x0001);
+
+ do {
+ *((volatile unsigned short *) LAN_RESET_REGISTER) = 0x0000;
+ udelay (3);
+ } while (*((volatile unsigned short *) LAN_RESET_REGISTER) != 0x0000);
+#endif
*((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01;
udelay (3);
diff --git a/board/omap1610inn/platform.S b/board/omap1610inn/platform.S
index cad152b..1775695 100644
--- a/board/omap1610inn/platform.S
+++ b/board/omap1610inn/platform.S
@@ -5,6 +5,8 @@
* Texas Instruments, <www.ti.com>
* Kshitij Gupta <Kshitij@ti.com>
*
+ * Modified for OMAP 1610 H2 board by Nishant Kamat, Jan 2004
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
@@ -248,6 +250,22 @@
ldr r1, VAL_TC_EMIFS_CS3_CONFIG
ldr r0, REG_TC_EMIFS_CS3_CONFIG
str r1, [r0] /* Chip Select 3 */
+
+#ifdef CONFIG_H2_OMAP1610
+ /* inserting additional 2 clock cycle hold time for LAN */
+ ldr r0, REG_TC_EMIFS_CS1_ADVANCED
+ ldr r1, VAL_TC_EMIFS_CS1_ADVANCED
+ str r1, [r0]
+#endif
+ /* Start MPU Timer 1 */
+ ldr r0, REG_MPU_LOAD_TIMER
+ ldr r1, VAL_MPU_LOAD_TIMER
+ str r1, [r0]
+
+ ldr r0, REG_MPU_CNTL_TIMER
+ ldr r1, VAL_MPU_CNTL_TIMER
+ str r1, [r0]
+
/* back to arch calling code */
mov pc, lr
@@ -266,6 +284,11 @@
REG_TC_EMIFS_CS3_CONFIG: /* 32 bits */
.word 0xfffecc1c
+#ifdef CONFIG_H2_OMAP1610
+REG_TC_EMIFS_CS1_ADVANCED: /* 32 bits */
+ .word 0xfffecc54
+#endif
+
/* MPU clock/reset/power mode control registers */
REG_ARM_CKCTL: /* 16 bits */
.word 0xfffece00
@@ -338,6 +361,11 @@
REG_WATCHDOG:
.word 0xfffec808
+REG_MPU_LOAD_TIMER:
+ .word 0xfffec600
+REG_MPU_CNTL_TIMER:
+ .word 0xfffec500
+
/* 96 MHz Samsung Mobile DDR */
SDRAM_CONFIG_VAL:
.word 0x001200f4
@@ -350,6 +378,7 @@
VAL_DPLL1_CTL:
.word 0x2830
+#ifdef CONFIG_INNOVATOROMAP1610
VAL_TC_EMIFS_CS0_CONFIG:
.word 0x002130b0
VAL_TC_EMIFS_CS1_CONFIG:
@@ -358,6 +387,21 @@
.word 0x000055f0
VAL_TC_EMIFS_CS3_CONFIG:
.word 0x88011131
+#endif
+
+#ifdef CONFIG_H2_OMAP1610
+VAL_TC_EMIFS_CS0_CONFIG:
+ .word 0x00203331
+VAL_TC_EMIFS_CS1_CONFIG:
+ .word 0x8180fff3
+VAL_TC_EMIFS_CS2_CONFIG:
+ .word 0xf800f22a
+VAL_TC_EMIFS_CS3_CONFIG:
+ .word 0x88011131
+VAL_TC_EMIFS_CS1_ADVANCED:
+ .word 0x00000022
+#endif
+
VAL_TC_EMIFF_SDRAM_CONFIG:
.word 0x010290fc
VAL_TC_EMIFF_MRS:
@@ -376,6 +420,11 @@
WATCHDOG_VAL2:
.word 0x000000a0
+VAL_MPU_LOAD_TIMER:
+ .word 0xffffffff
+VAL_MPU_CNTL_TIMER:
+ .word 0xffffffa1
+
/* command values */
.equ CMD_SDRAM_NOP, 0x00000000
.equ CMD_SDRAM_PRECHARGE, 0x00000001
diff --git a/cpu/74xx_7xx/traps.c b/cpu/74xx_7xx/traps.c
index 6e94601..ac5f8bf 100644
--- a/cpu/74xx_7xx/traps.c
+++ b/cpu/74xx_7xx/traps.c
@@ -140,19 +140,18 @@
printf("Machine check in kernel mode.\n");
printf("Caused by (from msr): ");
printf("regs %p ",regs);
- switch( regs->msr & 0x0000F000)
- {
- case (1<<12) :
+ switch( regs->msr & 0x000F0000) {
+ case (0x80000000>>12):
printf("Machine check signal - probably due to mm fault\n"
"with mmu off\n");
break;
- case (1<<13) :
+ case (0x80000000>>13):
printf("Transfer error ack signal\n");
break;
- case (1<<14) :
+ case (0x80000000>>14):
printf("Data parity signal\n");
break;
- case (1<<15) :
+ case (0x80000000>>15):
printf("Address parity signal\n");
break;
default:
diff --git a/cpu/arm926ejs/interrupts.c b/cpu/arm926ejs/interrupts.c
index 3985217..4d6efeb 100644
--- a/cpu/arm926ejs/interrupts.c
+++ b/cpu/arm926ejs/interrupts.c
@@ -1,4 +1,7 @@
/*
+ * (C) Copyright 2003
+ * Texas Instruments <www.ti.com>
+ *
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
@@ -31,7 +34,6 @@
#include <common.h>
#include <arm925t.h>
-#include <configs/omap1510.h>
#include <asm/proc-armv/ptrace.h>
@@ -47,12 +49,14 @@
{
unsigned long temp;
__asm__ __volatile__("mrs %0, cpsr\n"
- "bic %0, %0, #0x80\n"
- "msr cpsr_c, %0"
- : "=r" (temp)
- : "memory");
+ "bic %0, %0, #0x80\n"
+ "msr cpsr_c, %0"
+ : "=r" (temp)
+ :
+ : "memory");
}
+
/*
* disable IRQ/FIQ interrupts
* returns true if interrupts had been enabled before we disabled them
@@ -61,10 +65,11 @@
{
unsigned long old,temp;
__asm__ __volatile__("mrs %0, cpsr\n"
- "orr %1, %0, #0xc0\n"
- "msr cpsr_c, %1"
- : "=r" (old), "=r" (temp)
- : "memory");
+ "orr %1, %0, #0xc0\n"
+ "msr cpsr_c, %1"
+ : "=r" (old), "=r" (temp)
+ :
+ : "memory");
return (old & 0x80) == 0;
}
#else
@@ -179,10 +184,14 @@
{
int32_t val;
+ /* Start the decrementer ticking down from 0xffffffff */
*((int32_t *) (CFG_TIMERBASE + LOAD_TIM)) = TIMER_LOAD_VAL;
- val = MPUTIM_ST | MPUTIM_AR | MPUTIM_CLOCK_ENABLE |
- (CFG_PVT << MPUTIM_PTV_BIT);
+ val = MPUTIM_ST | MPUTIM_AR | MPUTIM_CLOCK_ENABLE | (CFG_PVT << MPUTIM_PTV_BIT);
*((int32_t *) (CFG_TIMERBASE + CNTL_TIMER)) = val;
+
+ /* init the timestamp and lastdec value */
+ reset_timer_masked();
+
return (0);
}
@@ -205,44 +214,50 @@
timestamp = t;
}
-/* very rough timer... */
+/* delay x useconds AND perserve advance timstamp value */
void udelay (unsigned long usec)
{
-#ifdef CONFIG_INNOVATOROMAP1610
-#define LOOPS_PER_MSEC 100 /* tuned on omap1610 */
- volatile int i, time_remaining = LOOPS_PER_MSEC * usec;
+ ulong tmo, tmp;
- for (i = time_remaining; i > 0; i--) {
+ if(usec >= 1000){ /* if "big" number, spread normalization to seconds */
+ tmo = usec / 1000; /* start to normalize for usec to ticks per sec */
+ tmo *= CFG_HZ; /* find number of "ticks" to wait to achieve target */
+ tmo /= 1000; /* finish normalize. */
+ }else{ /* else small number, don't kill it prior to HZ multiply */
+ tmo = usec * CFG_HZ;
+ tmo /= (1000*1000);
}
-#else
- ulong tmo;
- tmo = usec / 1000;
- tmo *= CFG_HZ;
- tmo /= 1000;
- tmo += get_timer (0);
- while (get_timer_masked () < tmo)
+ tmp = get_timer (0); /* get current timestamp */
+ if( (tmo + tmp) < tmp ) /* if setting this fordward will roll time stamp */
+ reset_timer_masked (); /* reset "advancing" timestamp to 0, set lastdec value */
+ else
+ tmo += tmp; /* else, set advancing stamp wake up time */
+
+ while (get_timer_masked () < tmo)/* loop till event */
/*NOP*/;
-#endif
}
void reset_timer_masked (void)
{
/* reset time */
- lastdec = READ_TIMER;
- timestamp = 0;
+ lastdec = READ_TIMER; /* capure current decrementer value time */
+ timestamp = 0; /* start "advancing" time stamp from 0 */
}
ulong get_timer_masked (void)
{
ulong now = READ_TIMER; /* current tick value */
- if (lastdec >= now) { /* did I roll (rem decrementer) */
+ if (lastdec >= now) { /* normal mode (non roll) */
/* normal mode */
- /* record amount of time since last check */
- timestamp += lastdec - now;
- } else {
- /* we have an overflow ... */
+ timestamp += lastdec - now; /* move stamp fordward with absoulte diff ticks */
+ } else { /* we have overflow of the count down timer */
+ /* nts = ts + ld + (TLV - now)
+ * ts=old stamp, ld=time that passed before passing through -1
+ * (TLV-now) amount of time after passing though -1
+ * nts = new "advancing time stamp"...it could also roll and cause problems.
+ */
timestamp += lastdec + TIMER_LOAD_VAL - now;
}
lastdec = now;
@@ -250,25 +265,24 @@
return timestamp;
}
+/* waits specified delay value and resets timestamp */
void udelay_masked (unsigned long usec)
{
-#ifdef CONFIG_INNOVATOROMAP1610
- #define LOOPS_PER_MSEC 100 /* tuned on omap1610 */
- volatile int i, time_remaining = LOOPS_PER_MSEC*usec;
- for (i=time_remaining; i>0; i--) { }
-#else
+ ulong tmo, tmp;
- ulong tmo;
+ if(usec >= 1000){ /* if "big" number, spread normalization to seconds */
+ tmo = usec / 1000; /* start to normalize for usec to ticks per sec */
+ tmo *= CFG_HZ; /* find number of "ticks" to wait to achieve target */
+ tmo /= 1000; /* finish normalize. */
+ }else{ /* else small number, don't kill it prior to HZ multiply */
+ tmo = usec * CFG_HZ;
+ tmo /= (1000*1000);
+ }
- tmo = usec / 1000;
- tmo *= CFG_HZ;
- tmo /= 1000;
+ reset_timer_masked (); /* set "advancing" timestamp to 0, set lastdec vaule */
- reset_timer_masked ();
-
- while (get_timer_masked () < tmo)
+ while (get_timer_masked () < tmo) /* wait for time stamp to overtake tick number.*/
/*NOP*/;
-#endif
}
/*
@@ -287,6 +301,7 @@
ulong get_tbclk (void)
{
ulong tbclk;
+
tbclk = CFG_HZ;
return tbclk;
}
diff --git a/cpu/mpc5xx/traps.c b/cpu/mpc5xx/traps.c
index 41939c1..14fd59e 100644
--- a/cpu/mpc5xx/traps.c
+++ b/cpu/mpc5xx/traps.c
@@ -139,18 +139,17 @@
printf("Machine check in kernel mode.\n");
printf("Caused by (from msr): ");
printf("regs %p ",regs);
- switch( regs->msr & 0x0000F000)
- {
- case (1<<12) :
+ switch( regs->msr & 0x000F0000) {
+ case (0x80000000>>12):
printf("Machine check signal\n");
break;
- case (1<<13) :
+ case (0x80000000>>13):
printf("Transfer error ack signal\n");
break;
- case (1<<14) :
+ case (0x80000000>>14):
printf("Data parity signal\n");
break;
- case (1<<15) :
+ case (0x80000000>>15):
printf("Address parity signal\n");
break;
default:
diff --git a/cpu/mpc5xxx/traps.c b/cpu/mpc5xxx/traps.c
index 5d43394..2ee782b 100644
--- a/cpu/mpc5xxx/traps.c
+++ b/cpu/mpc5xxx/traps.c
@@ -5,6 +5,7 @@
*
* Modified by Cort Dougan (cort@cs.nmt.edu)
* and Paul Mackerras (paulus@cs.anu.edu.au)
+ * fixed Machine Check Reasons by Reinhard Meyer (r.meyer@emk-elektronik.de)
*
* (C) Copyright 2000-2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -130,19 +131,20 @@
printf("Machine check in kernel mode.\n");
printf("Caused by (from msr): ");
printf("regs %p ",regs);
- switch( regs->msr & 0x0000F000)
+ /* refer to 603e Manual (MPC603EUM/AD), chapter 4.5.2.1 */
+ switch( regs->msr & 0x000F0000)
{
- case (1<<12) :
+ case (0x80000000>>12) :
printf("Machine check signal - probably due to mm fault\n"
"with mmu off\n");
break;
- case (1<<13) :
+ case (0x80000000>>13) :
printf("Transfer error ack signal\n");
break;
- case (1<<14) :
+ case (0x80000000>>14) :
printf("Data parity signal\n");
break;
- case (1<<15) :
+ case (0x80000000>>15) :
printf("Address parity signal\n");
break;
default:
diff --git a/cpu/mpc824x/traps.c b/cpu/mpc824x/traps.c
index 956244f..071d003 100644
--- a/cpu/mpc824x/traps.c
+++ b/cpu/mpc824x/traps.c
@@ -120,19 +120,18 @@
printf("Machine check in kernel mode.\n");
printf("Caused by (from msr): ");
printf("regs %p ",regs);
- switch( regs->msr & 0x0000F000)
- {
- case (1<<12) :
+ switch( regs->msr & 0x000F0000) {
+ case (0x80000000>>12):
printf("Machine check signal - probably due to mm fault\n"
"with mmu off\n");
break;
- case (1<<13) :
+ case (0x80000000>>13):
printf("Transfer error ack signal\n");
break;
- case (1<<14) :
+ case (0x80000000>>14):
printf("Data parity signal\n");
break;
- case (1<<15) :
+ case (0x80000000>>15):
printf("Address parity signal\n");
break;
default:
diff --git a/cpu/mpc8260/traps.c b/cpu/mpc8260/traps.c
index deab808..693db39 100644
--- a/cpu/mpc8260/traps.c
+++ b/cpu/mpc8260/traps.c
@@ -158,18 +158,18 @@
printf("Machine check in kernel mode.\n");
printf("Caused by (from msr): ");
printf("regs %p ",regs);
- switch( regs->msr & 0x0000F000) {
- case (1<<12) :
+ switch( regs->msr & 0x000F0000) {
+ case (0x80000000>>12):
printf("Machine check signal - probably due to mm fault\n"
"with mmu off\n");
break;
- case (1<<13) :
+ case (0x80000000>>13):
printf("Transfer error ack signal\n");
break;
- case (1<<14) :
+ case (0x80000000>>14):
printf("Data parity signal\n");
break;
- case (1<<15) :
+ case (0x80000000>>15):
printf("Address parity signal\n");
break;
default:
diff --git a/cpu/mpc85xx/traps.c b/cpu/mpc85xx/traps.c
index fd0b436..a348eab 100644
--- a/cpu/mpc85xx/traps.c
+++ b/cpu/mpc85xx/traps.c
@@ -164,19 +164,18 @@
printf("Machine check in kernel mode.\n");
printf("Caused by (from msr): ");
printf("regs %p ",regs);
- switch( regs->msr & 0x0000F000)
- {
- case (1<<12) :
+ switch( regs->msr & 0x000F0000) {
+ case (0x80000000>>12):
printf("Machine check signal - probably due to mm fault\n"
"with mmu off\n");
break;
- case (1<<13) :
+ case (0x80000000>>13):
printf("Transfer error ack signal\n");
break;
- case (1<<14) :
+ case (0x80000000>>14):
printf("Data parity signal\n");
break;
- case (1<<15) :
+ case (0x80000000>>15):
printf("Address parity signal\n");
break;
default:
diff --git a/cpu/mpc8xx/traps.c b/cpu/mpc8xx/traps.c
index c432be6..67b75cc 100644
--- a/cpu/mpc8xx/traps.c
+++ b/cpu/mpc8xx/traps.c
@@ -134,19 +134,18 @@
printf("Machine check in kernel mode.\n");
printf("Caused by (from msr): ");
printf("regs %p ",regs);
- switch( regs->msr & 0x0000F000)
- {
- case (1<<12) :
+ switch( regs->msr & 0x000F0000) {
+ case (0x80000000>>12):
printf("Machine check signal - probably due to mm fault\n"
"with mmu off\n");
break;
- case (1<<13) :
+ case (0x80000000>>13):
printf("Transfer error ack signal\n");
break;
- case (1<<14) :
+ case (0x80000000>>14):
printf("Data parity signal\n");
break;
- case (1<<15) :
+ case (0x80000000>>15):
printf("Address parity signal\n");
break;
default:
diff --git a/cpu/nios/interrupts.c b/cpu/nios/interrupts.c
index 31eabde..450946b 100644
--- a/cpu/nios/interrupts.c
+++ b/cpu/nios/interrupts.c
@@ -128,6 +128,10 @@
tmr->control &= ~NIOS_TIMER_ITO;
tmr->control |= NIOS_TIMER_STOP;
+#if defined(CFG_NIOS_TMRCNT)
+ tmr->periodl = CFG_NIOS_TMRCNT & 0xffff;
+ tmr->periodh = (CFG_NIOS_TMRCNT >> 16) & 0xffff;
+#endif
#endif
for (vec=0; vec<64; vec++ ) {
diff --git a/cpu/ppc4xx/Makefile b/cpu/ppc4xx/Makefile
index 9b54d32..a841109 100644
--- a/cpu/ppc4xx/Makefile
+++ b/cpu/ppc4xx/Makefile
@@ -28,7 +28,7 @@
START = start.o resetvec.o kgdb.o
AOBJS = dcr.o
COBJS = 405gp_enet.o 405gp_pci.o 440gx_enet.o \
- bedbug_405.o \
+ bedbug_405.o commproc.o \
cpu.o cpu_init.o i2c.o interrupts.o \
miiphy.o miiphy_440.o sdram.o serial.o \
spd_sdram.o speed.o traps.o
diff --git a/cpu/ppc4xx/commproc.c b/cpu/ppc4xx/commproc.c
new file mode 100644
index 0000000..68aab5b
--- /dev/null
+++ b/cpu/ppc4xx/commproc.c
@@ -0,0 +1,69 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ *
+ * Atapted for ppc4XX by Denis Peter
+ */
+
+#include <common.h>
+#include <commproc.h>
+
+
+#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
+
+void post_word_store (ulong a)
+{
+ volatile void *save_addr = (volatile void *)(CFG_OCM_DATA_ADDR + CFG_POST_WORD_ADDR);
+ *(volatile ulong *) save_addr = a;
+}
+
+ulong post_word_load (void)
+{
+ volatile void *save_addr = (volatile void *)(CFG_OCM_DATA_ADDR + CFG_POST_WORD_ADDR);
+ return *(volatile ulong *) save_addr;
+}
+
+#endif /* CONFIG_POST || CONFIG_LOGBUFFER*/
+
+#ifdef CONFIG_BOOTCOUNT_LIMIT
+
+void bootcount_store (ulong a)
+{
+ volatile ulong *save_addr =
+ (volatile ulong *)(CFG_OCM_DATA_ADDR + CFG_BOOTCOUNT_ADDR);
+
+ save_addr[0] = a;
+ save_addr[1] = BOOTCOUNT_MAGIC;
+}
+
+ulong bootcount_load (void)
+{
+ volatile ulong *save_addr =
+ (volatile ulong *)(CFG_OCM_DATA_ADDR + CFG_BOOTCOUNT_ADDR);
+
+ if (save_addr[1] != BOOTCOUNT_MAGIC)
+ return 0;
+ else
+ return save_addr[0];
+}
+
+#endif /* CONFIG_BOOTCOUNT_LIMIT */
diff --git a/cpu/ppc4xx/traps.c b/cpu/ppc4xx/traps.c
index 1cf899e..6aecca2 100644
--- a/cpu/ppc4xx/traps.c
+++ b/cpu/ppc4xx/traps.c
@@ -164,19 +164,18 @@
printf("Machine check in kernel mode.\n");
printf("Caused by (from msr): ");
printf("regs %p ",regs);
- switch( regs->msr & 0x0000F000)
- {
- case (1<<12) :
+ switch( regs->msr & 0x000F0000) {
+ case (0x80000000>>12):
printf("Machine check signal - probably due to mm fault\n"
"with mmu off\n");
break;
- case (1<<13) :
+ case (0x80000000>>13):
printf("Transfer error ack signal\n");
break;
- case (1<<14) :
+ case (0x80000000>>14):
printf("Data parity signal\n");
break;
- case (1<<15) :
+ case (0x80000000>>15):
printf("Address parity signal\n");
break;
default:
diff --git a/doc/README.nios b/doc/README.nios
index 08f4e7e..d3a9277 100644
--- a/doc/README.nios
+++ b/doc/README.nios
@@ -100,6 +100,9 @@
CFG_NIOS_TMRMS -- the period of the timer in milliseconds.
+CFG_NIOS_TMRCNT -- the preloadable counter value for the timer if it has
+ no fixed period.
+
CFG_NIOS_ASMIBASE -- the base address of the ASMI peripheral.
(standard-32: na_asmi_base).
diff --git a/include/asm-nios/cache.h b/include/asm-nios/cache.h
new file mode 100644
index 0000000..3cdb703
--- /dev/null
+++ b/include/asm-nios/cache.h
@@ -0,0 +1 @@
+/*FIXME: Implement this! */
diff --git a/include/asm-nios/global_data.h b/include/asm-nios/global_data.h
index 935d08e..fd11389 100644
--- a/include/asm-nios/global_data.h
+++ b/include/asm-nios/global_data.h
@@ -34,6 +34,10 @@
unsigned long reloc_off; /* Relocation Offset */
unsigned long env_addr; /* Address of Environment struct */
unsigned long env_valid; /* Checksum of Environment valid */
+#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
+ unsigned long post_log_word; /* Record POST activities */
+ unsigned long post_init_f_time; /* When post_init_f started */
+#endif
void **jt; /* Standalone app jump table */
} gd_t;
diff --git a/include/configs/DK1C20.h b/include/configs/DK1C20.h
index 2d77dd7..9b4f144 100644
--- a/include/configs/DK1C20.h
+++ b/include/configs/DK1C20.h
@@ -146,17 +146,60 @@
#if (CFG_NIOS_CPU_TICK_TIMER == 0)
-#error *** CFG_ERROR: tick timer at TIMER0 not supported, expand your config.h
+#define CFG_NIOS_TMRBASE CFG_NIOS_CPU_TIMER0 /* TIMER0 as tick */
+#define CFG_NIOS_TMRIRQ CFG_NIOS_CPU_TIMER0_IRQ
+
+#if (CFG_NIOS_CPU_TIMER0_FP == 1) /* fixed period */
+
+#if (CFG_NIOS_CPU_TIMER0_PER >= CFG_HZ)
+#define CFG_NIOS_TMRMS (CFG_NIOS_CPU_TIMER0_PER / CFG_HZ)
+#else
+#error *** CFG_ERROR: you have to use a timer periode greater than CFG_HZ
+#endif
+
+#undef CFG_NIOS_TMRCNT /* no preloadable counter value */
+
+#elif (CFG_NIOS_CPU_TIMER0_FP == 0) /* variable period */
+
+#if (CFG_HZ <= 1000)
+#define CFG_NIOS_TMRMS (1000 / CFG_HZ)
+#else
+#error *** CFG_ERROR: sorry, CFG_HZ have to be less than 1000
+#endif
+
+#define CFG_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CFG_HZ)
+
+#else
+#error *** CFG_ERROR: you have to define CFG_NIOS_CPU_TIMER0_FP correct
+#endif
#elif (CFG_NIOS_CPU_TICK_TIMER == 1)
#define CFG_NIOS_TMRBASE CFG_NIOS_CPU_TIMER1 /* TIMER1 as tick */
#define CFG_NIOS_TMRIRQ CFG_NIOS_CPU_TIMER1_IRQ
+#if (CFG_NIOS_CPU_TIMER1_FP == 1) /* fixed period */
+
#if (CFG_NIOS_CPU_TIMER1_PER >= CFG_HZ)
#define CFG_NIOS_TMRMS (CFG_NIOS_CPU_TIMER1_PER / CFG_HZ)
#else
-#error *** CFG_ERROR: you have to use a timer periode of more than CFG_HZ
+#error *** CFG_ERROR: you have to use a timer periode greater than CFG_HZ
+#endif
+
+#undef CFG_NIOS_TMRCNT /* no preloadable counter value */
+
+#elif (CFG_NIOS_CPU_TIMER1_FP == 0) /* variable period */
+
+#if (CFG_HZ <= 1000)
+#define CFG_NIOS_TMRMS (1000 / CFG_HZ)
+#else
+#error *** CFG_ERROR: sorry, CFG_HZ have to be less than 1000
+#endif
+
+#define CFG_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CFG_HZ)
+
+#else
+#error *** CFG_ERROR: you have to define CFG_NIOS_CPU_TIMER1_FP correct
#endif
#endif /* CFG_NIOS_CPU_TICK_TIMER */
diff --git a/include/configs/DK1S10.h b/include/configs/DK1S10.h
index 835c7a2..e5e487c 100644
--- a/include/configs/DK1S10.h
+++ b/include/configs/DK1S10.h
@@ -168,10 +168,28 @@
#define CFG_NIOS_TMRBASE CFG_NIOS_CPU_TIMER0 /* TIMER0 as tick */
#define CFG_NIOS_TMRIRQ CFG_NIOS_CPU_TIMER0_IRQ
+#if (CFG_NIOS_CPU_TIMER0_FP == 1) /* fixed period */
+
#if (CFG_NIOS_CPU_TIMER0_PER >= CFG_HZ)
#define CFG_NIOS_TMRMS (CFG_NIOS_CPU_TIMER0_PER / CFG_HZ)
#else
-#error *** CFG_ERROR: you have to use a timer periode of more than CFG_HZ
+#error *** CFG_ERROR: you have to use a timer periode greater than CFG_HZ
+#endif
+
+#undef CFG_NIOS_TMRCNT /* no preloadable counter value */
+
+#elif (CFG_NIOS_CPU_TIMER0_FP == 0) /* variable period */
+
+#if (CFG_HZ <= 1000)
+#define CFG_NIOS_TMRMS (1000 / CFG_HZ)
+#else
+#error *** CFG_ERROR: sorry, CFG_HZ have to be less than 1000
+#endif
+
+#define CFG_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CFG_HZ)
+
+#else
+#error *** CFG_ERROR: you have to define CFG_NIOS_CPU_TIMER0_FP correct
#endif
#elif (CFG_NIOS_CPU_TICK_TIMER == 1)
@@ -179,10 +197,28 @@
#define CFG_NIOS_TMRBASE CFG_NIOS_CPU_TIMER1 /* TIMER1 as tick */
#define CFG_NIOS_TMRIRQ CFG_NIOS_CPU_TIMER1_IRQ
+#if (CFG_NIOS_CPU_TIMER1_FP == 1) /* fixed period */
+
#if (CFG_NIOS_CPU_TIMER1_PER >= CFG_HZ)
#define CFG_NIOS_TMRMS (CFG_NIOS_CPU_TIMER1_PER / CFG_HZ)
#else
-#error *** CFG_ERROR: you have to use a timer periode of more than CFG_HZ
+#error *** CFG_ERROR: you have to use a timer periode greater than CFG_HZ
+#endif
+
+#undef CFG_NIOS_TMRCNT /* no preloadable counter value */
+
+#elif (CFG_NIOS_CPU_TIMER1_FP == 0) /* variable period */
+
+#if (CFG_HZ <= 1000)
+#define CFG_NIOS_TMRMS (1000 / CFG_HZ)
+#else
+#error *** CFG_ERROR: sorry, CFG_HZ have to be less than 1000
+#endif
+
+#define CFG_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CFG_HZ)
+
+#else
+#error *** CFG_ERROR: you have to define CFG_NIOS_CPU_TIMER1_FP correct
#endif
#endif /* CFG_NIOS_CPU_TICK_TIMER */
diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h
index cfe74e1..39419d0 100644
--- a/include/configs/MIP405.h
+++ b/include/configs/MIP405.h
@@ -55,20 +55,21 @@
***********************************************************/
#define MIP405_COMMON_CMDS \
(CONFIG_CMD_DFL | \
- CFG_CMD_IDE | \
- CFG_CMD_DHCP | \
CFG_CMD_CACHE | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
CFG_CMD_ECHO | \
CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_REGINFO | \
- CFG_CMD_DATE | \
CFG_CMD_ELF | \
+ CFG_CMD_FAT | \
+ CFG_CMD_I2C | \
+ CFG_CMD_IDE | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_JFFS2 | \
CFG_CMD_MII | \
- CFG_CMD_FAT | \
+ CFG_CMD_PCI | \
CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
CFG_CMD_SAVES | \
CFG_CMD_BSP )
@@ -235,6 +236,9 @@
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+#define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */
+#define CFG_JFFS2_NUM_BANKS 1 /* ! second bank contains U-Boot */
+
/*-----------------------------------------------------------------------
* Cache Configuration
*/
@@ -244,6 +248,25 @@
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
+/*-----------------------------------------------------------------------
+ * Logbuffer Configuration
+ */
+#undef CONFIG_LOGBUFFER /* supported but not enabled */
+/*-----------------------------------------------------------------------
+ * Bootcountlimit Configuration
+ */
+#undef CONFIG_BOOTCOUNT_LIMIT /* supported but not enabled */
+
+/*-----------------------------------------------------------------------
+ * POST Configuration
+ */
+#if 0 /* enable this if POST is desired (is supported but not enabled) */
+#define CONFIG_POST (CFG_POST_MEMORY | \
+ CFG_POST_CPU | \
+ CFG_POST_RTC | \
+ CFG_POST_I2C)
+
+#endif
/*
* Init Memory Controller:
*/
@@ -273,7 +296,16 @@
#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of On Chip SRAM */
#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+/* reserve some memory for POST and BOOT limit info */
+#define CFG_INIT_SP_OFFSET (CFG_GBL_DATA_OFFSET - 32)
+
+#ifdef CONFIG_POST /* reserve one word for POST Info */
+#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 4)
+#endif
+
+#ifdef CONFIG_BOOTCOUNT_LIMIT /* reserve 2 word for bootcount limit */
+#define CFG_BOOTCOUNT_ADDR (CFG_GBL_DATA_OFFSET - 12)
+#endif
/*
* Internal Definitions
@@ -298,7 +330,8 @@
***********************************************************/
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 1 /* PHY address */
-
+#define CONFIG_PHY_RESET_DELAY 300 /* Intel LXT971A needs this */
+#define CONFIG_PHY_CMD_DELAY 40 /* Intel LXT971A needs this */
/************************************************************
* RTC
***********************************************************/
diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h
index 8ff264b..bdb7a46 100644
--- a/include/configs/TOP5200.h
+++ b/include/configs/TOP5200.h
@@ -314,7 +314,19 @@
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_RTC_MPC5200 1 /* use 5200 RTC */
+#ifdef CONFIG_EVAL5200 /* M48T08 is available with the Evaluation board only */
+ #define CONFIG_RTC_MK48T59 1 /* use M48T08 on EVAL5200 */
+ #define RTC(reg) (0xf0010000+reg)
+ /* setup CS2 for M48T08. Must MAP 64kB */
+ #define CFG_CS2_START RTC(0)
+ #define CFG_CS2_SIZE 0x10000
+ /* setup CS2 configuration register: */
+ /* WaitP = 0, WaitX = 4, MX=0, AL=1, AA=1, CE=1 */
+ /* AS=2, DS=0, Bank=0, WTyp=0, WS=0, RS=0, WO=0, RO=0 */
+ #define CFG_CS2_CFG 0x00047800
+#else
+ #define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */
+#endif
/*
* Various low-level settings
diff --git a/include/configs/omap1610h2.h b/include/configs/omap1610h2.h
new file mode 100644
index 0000000..2eb65e2
--- /dev/null
+++ b/include/configs/omap1610h2.h
@@ -0,0 +1,178 @@
+/*
+ * (C) Copyright 2004
+ * Texas Instruments.
+ * Kshitij Gupta <kshitij@ti.com>
+ * Configuration settings for the TI OMAP 1610 H2 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * If we are developing, we might want to start armboot from ram
+ * so we MUST NOT initialize critical regs like mem-timing ...
+ */
+#define CONFIG_INIT_CRITICAL /* undef for developing */
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_ARM926EJS 1 /* This is an arm926ejs CPU core */
+#define CONFIG_OMAP 1 /* in a TI OMAP core */
+#define CONFIG_OMAP1610 1 /* which is in a 1610 */
+#define CONFIG_H2_OMAP1610 1 /* on an H2 Board */
+
+/* input clock of PLL */
+/* the OMAP1610 H2 has 12MHz input clock */
+#define CONFIG_SYS_CLK_FREQ 12000000
+
+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_LAN91C96_BASE 0x04000300
+#define CONFIG_LAN91C96_EXT_PHY
+
+/*
+ * NS16550 Configuration
+ */
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE (-4)
+#define CFG_NS16550_CLK (48000000) /* can be 12M/32Khz or 48Mhz */
+#define CFG_NS16550_COM1 0xfffb0000 /* uart1, bluetooth uart */
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on OMAP1610 H2 */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP)
+#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+#include <configs/omap1510.h>
+
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTARGS "mem=32M console=ttyS0,115200n8 noinitrd \
+ root=/dev/nfs rw nfsroot=157.87.82.48:\
+ /home/a0875451/mwd/myfs/target ip=dhcp"
+#define CONFIG_NETMASK 255.255.254.0 /* talk on MY local net */
+#define CONFIG_IPADDR 156.117.97.156 /* static IP I currently own */
+#define CONFIG_SERVERIP 156.117.97.139 /* current IP of my dev pc */
+#define CONFIG_BOOTFILE "uImage" /* file to load */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "OMAP1610 H2 # " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x10000000 /* memtest works on */
+#define CFG_MEMTEST_END 0x12000000 /* 32 MB in DRAM */
+
+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
+
+#define CFG_LOAD_ADDR 0x10000000 /* default load address */
+
+/* The 1610 has 6 timers, they can be driven by the RefClk (12Mhz) or by
+ * DPLL1. This time is further subdivided by a local divisor.
+ */
+#define CFG_TIMERBASE 0xFFFEC500 /* use timer 1 */
+#define CFG_PVT 7 /* 2^(pvt+1), divide by 256 */
+#define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT))
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (128*1024) /* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
+#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
+
+#ifdef CONFIG_CS0_BOOT
+#define PHYS_FLASH_1 0x0C000000
+#endif
+#ifdef CONFIG_CS3_BOOT
+#define PHYS_FLASH_1 0x00000000
+#endif
+
+#define CFG_FLASH_BASE PHYS_FLASH_1
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define PHYS_FLASH_SIZE 0x02000000 /* 32MB */
+#define CFG_MAX_FLASH_SECT (259) /* max number of sectors on one chip */
+/* addr of environment */
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x020000)
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT (20*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT (20*CFG_HZ) /* Timeout for Flash Write */
+
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */
+#define CFG_ENV_OFFSET 0x20000 /* environment starts here */
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/omap1610inn.h b/include/configs/omap1610inn.h
index 9bdd795..da8043d 100644
--- a/include/configs/omap1610inn.h
+++ b/include/configs/omap1610inn.h
@@ -151,7 +151,12 @@
#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
+#ifdef CONFIG_CS0_BOOT
+#define PHYS_FLASH_1 0x0C000000
+#endif
+#ifdef CONFIG_CS3_BOOT
+#define PHYS_FLASH_1 0x00000000
+#endif
#define CFG_FLASH_BASE PHYS_FLASH_1
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index d7cee2b..04a1b8b 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -1011,6 +1011,9 @@
void hang (void)
{
puts ("### ERROR ### Please RESET the board ###\n");
+#ifdef CONFIG_SHOW_BOOT_PROGRESS
+ show_boot_progress(-30);
+#endif
for (;;);
}
diff --git a/post/post.c b/post/post.c
index 89ad6f0..b3df91a 100644
--- a/post/post.c
+++ b/post/post.c
@@ -131,8 +131,12 @@
post_log ("POST %s ", post_list[j].cmd);
if (gd->post_log_word & post_list[j].testid)
post_log ("PASSED\n");
- else
+ else {
post_log ("FAILED\n");
+#ifdef CONFIG_SHOW_BOOT_PROGRESS
+ show_boot_progress(-31);
+#endif
+ }
}
}
}
@@ -239,8 +243,12 @@
if ((*test->test) (flags) == 0)
post_log_mark_succ ( test->testid );
} else {
- if ((*test->test) (flags) != 0)
+ if ((*test->test) (flags) != 0) {
post_log ("FAILED\n");
+#ifdef CONFIG_SHOW_BOOT_PROGRESS
+ show_boot_progress(-32);
+#endif
+ }
else
post_log ("PASSED\n");
}
diff --git a/rtc/mk48t59.c b/rtc/mk48t59.c
index 664d310..64f751f 100644
--- a/rtc/mk48t59.c
+++ b/rtc/mk48t59.c
@@ -83,6 +83,18 @@
out_byte(CMOS_DATA, (uint8)val);
}
+#elif defined(CONFIG_EVAL5200)
+
+static uchar rtc_read (short reg)
+{
+ return in8(RTC(reg));
+}
+
+static void rtc_write (short reg, uchar val)
+{
+ out8(RTC(reg),val);
+}
+
#else
# error Board specific rtc access functions should be supplied
#endif