* Patches by Reinhard Meyer, 14 Feb 2004:
- update board/emk tree; use common flash driver
- Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c
[adapted for other PPC CPUs -- wd]
- Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c
* Patch by Jon Diekema, 13 Feb 2004:
Call show_boot_progress() whenever POST "FAILED" is printed.
* Patch by Nishant Kamat, 13 Feb 2004:
Add support for TI OMAP1610 H2 Board
Fixes for cpu/arm926ejs/interrupt.c
(based on Richard Woodruff's patch for arm925, 16 Oct 03)
Fix for a timer bug in OMAP1610 Innovator
Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2
* Patches by Stephan Linz, 12 Feb 2004:
- add support for NIOS timer with variable period preload counter value
- prepare POST framework support for NIOS targets
* Patch by Denis Peter, 11 Feb 2004:
add POST support for the MIP405 board
diff --git a/include/asm-nios/cache.h b/include/asm-nios/cache.h
new file mode 100644
index 0000000..3cdb703
--- /dev/null
+++ b/include/asm-nios/cache.h
@@ -0,0 +1 @@
+/*FIXME: Implement this! */
diff --git a/include/asm-nios/global_data.h b/include/asm-nios/global_data.h
index 935d08e..fd11389 100644
--- a/include/asm-nios/global_data.h
+++ b/include/asm-nios/global_data.h
@@ -34,6 +34,10 @@
unsigned long reloc_off; /* Relocation Offset */
unsigned long env_addr; /* Address of Environment struct */
unsigned long env_valid; /* Checksum of Environment valid */
+#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
+ unsigned long post_log_word; /* Record POST activities */
+ unsigned long post_init_f_time; /* When post_init_f started */
+#endif
void **jt; /* Standalone app jump table */
} gd_t;
diff --git a/include/configs/DK1C20.h b/include/configs/DK1C20.h
index 2d77dd7..9b4f144 100644
--- a/include/configs/DK1C20.h
+++ b/include/configs/DK1C20.h
@@ -146,17 +146,60 @@
#if (CFG_NIOS_CPU_TICK_TIMER == 0)
-#error *** CFG_ERROR: tick timer at TIMER0 not supported, expand your config.h
+#define CFG_NIOS_TMRBASE CFG_NIOS_CPU_TIMER0 /* TIMER0 as tick */
+#define CFG_NIOS_TMRIRQ CFG_NIOS_CPU_TIMER0_IRQ
+
+#if (CFG_NIOS_CPU_TIMER0_FP == 1) /* fixed period */
+
+#if (CFG_NIOS_CPU_TIMER0_PER >= CFG_HZ)
+#define CFG_NIOS_TMRMS (CFG_NIOS_CPU_TIMER0_PER / CFG_HZ)
+#else
+#error *** CFG_ERROR: you have to use a timer periode greater than CFG_HZ
+#endif
+
+#undef CFG_NIOS_TMRCNT /* no preloadable counter value */
+
+#elif (CFG_NIOS_CPU_TIMER0_FP == 0) /* variable period */
+
+#if (CFG_HZ <= 1000)
+#define CFG_NIOS_TMRMS (1000 / CFG_HZ)
+#else
+#error *** CFG_ERROR: sorry, CFG_HZ have to be less than 1000
+#endif
+
+#define CFG_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CFG_HZ)
+
+#else
+#error *** CFG_ERROR: you have to define CFG_NIOS_CPU_TIMER0_FP correct
+#endif
#elif (CFG_NIOS_CPU_TICK_TIMER == 1)
#define CFG_NIOS_TMRBASE CFG_NIOS_CPU_TIMER1 /* TIMER1 as tick */
#define CFG_NIOS_TMRIRQ CFG_NIOS_CPU_TIMER1_IRQ
+#if (CFG_NIOS_CPU_TIMER1_FP == 1) /* fixed period */
+
#if (CFG_NIOS_CPU_TIMER1_PER >= CFG_HZ)
#define CFG_NIOS_TMRMS (CFG_NIOS_CPU_TIMER1_PER / CFG_HZ)
#else
-#error *** CFG_ERROR: you have to use a timer periode of more than CFG_HZ
+#error *** CFG_ERROR: you have to use a timer periode greater than CFG_HZ
+#endif
+
+#undef CFG_NIOS_TMRCNT /* no preloadable counter value */
+
+#elif (CFG_NIOS_CPU_TIMER1_FP == 0) /* variable period */
+
+#if (CFG_HZ <= 1000)
+#define CFG_NIOS_TMRMS (1000 / CFG_HZ)
+#else
+#error *** CFG_ERROR: sorry, CFG_HZ have to be less than 1000
+#endif
+
+#define CFG_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CFG_HZ)
+
+#else
+#error *** CFG_ERROR: you have to define CFG_NIOS_CPU_TIMER1_FP correct
#endif
#endif /* CFG_NIOS_CPU_TICK_TIMER */
diff --git a/include/configs/DK1S10.h b/include/configs/DK1S10.h
index 835c7a2..e5e487c 100644
--- a/include/configs/DK1S10.h
+++ b/include/configs/DK1S10.h
@@ -168,10 +168,28 @@
#define CFG_NIOS_TMRBASE CFG_NIOS_CPU_TIMER0 /* TIMER0 as tick */
#define CFG_NIOS_TMRIRQ CFG_NIOS_CPU_TIMER0_IRQ
+#if (CFG_NIOS_CPU_TIMER0_FP == 1) /* fixed period */
+
#if (CFG_NIOS_CPU_TIMER0_PER >= CFG_HZ)
#define CFG_NIOS_TMRMS (CFG_NIOS_CPU_TIMER0_PER / CFG_HZ)
#else
-#error *** CFG_ERROR: you have to use a timer periode of more than CFG_HZ
+#error *** CFG_ERROR: you have to use a timer periode greater than CFG_HZ
+#endif
+
+#undef CFG_NIOS_TMRCNT /* no preloadable counter value */
+
+#elif (CFG_NIOS_CPU_TIMER0_FP == 0) /* variable period */
+
+#if (CFG_HZ <= 1000)
+#define CFG_NIOS_TMRMS (1000 / CFG_HZ)
+#else
+#error *** CFG_ERROR: sorry, CFG_HZ have to be less than 1000
+#endif
+
+#define CFG_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CFG_HZ)
+
+#else
+#error *** CFG_ERROR: you have to define CFG_NIOS_CPU_TIMER0_FP correct
#endif
#elif (CFG_NIOS_CPU_TICK_TIMER == 1)
@@ -179,10 +197,28 @@
#define CFG_NIOS_TMRBASE CFG_NIOS_CPU_TIMER1 /* TIMER1 as tick */
#define CFG_NIOS_TMRIRQ CFG_NIOS_CPU_TIMER1_IRQ
+#if (CFG_NIOS_CPU_TIMER1_FP == 1) /* fixed period */
+
#if (CFG_NIOS_CPU_TIMER1_PER >= CFG_HZ)
#define CFG_NIOS_TMRMS (CFG_NIOS_CPU_TIMER1_PER / CFG_HZ)
#else
-#error *** CFG_ERROR: you have to use a timer periode of more than CFG_HZ
+#error *** CFG_ERROR: you have to use a timer periode greater than CFG_HZ
+#endif
+
+#undef CFG_NIOS_TMRCNT /* no preloadable counter value */
+
+#elif (CFG_NIOS_CPU_TIMER1_FP == 0) /* variable period */
+
+#if (CFG_HZ <= 1000)
+#define CFG_NIOS_TMRMS (1000 / CFG_HZ)
+#else
+#error *** CFG_ERROR: sorry, CFG_HZ have to be less than 1000
+#endif
+
+#define CFG_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CFG_HZ)
+
+#else
+#error *** CFG_ERROR: you have to define CFG_NIOS_CPU_TIMER1_FP correct
#endif
#endif /* CFG_NIOS_CPU_TICK_TIMER */
diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h
index cfe74e1..39419d0 100644
--- a/include/configs/MIP405.h
+++ b/include/configs/MIP405.h
@@ -55,20 +55,21 @@
***********************************************************/
#define MIP405_COMMON_CMDS \
(CONFIG_CMD_DFL | \
- CFG_CMD_IDE | \
- CFG_CMD_DHCP | \
CFG_CMD_CACHE | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
CFG_CMD_ECHO | \
CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_REGINFO | \
- CFG_CMD_DATE | \
CFG_CMD_ELF | \
+ CFG_CMD_FAT | \
+ CFG_CMD_I2C | \
+ CFG_CMD_IDE | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_JFFS2 | \
CFG_CMD_MII | \
- CFG_CMD_FAT | \
+ CFG_CMD_PCI | \
CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
CFG_CMD_SAVES | \
CFG_CMD_BSP )
@@ -235,6 +236,9 @@
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+#define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */
+#define CFG_JFFS2_NUM_BANKS 1 /* ! second bank contains U-Boot */
+
/*-----------------------------------------------------------------------
* Cache Configuration
*/
@@ -244,6 +248,25 @@
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
+/*-----------------------------------------------------------------------
+ * Logbuffer Configuration
+ */
+#undef CONFIG_LOGBUFFER /* supported but not enabled */
+/*-----------------------------------------------------------------------
+ * Bootcountlimit Configuration
+ */
+#undef CONFIG_BOOTCOUNT_LIMIT /* supported but not enabled */
+
+/*-----------------------------------------------------------------------
+ * POST Configuration
+ */
+#if 0 /* enable this if POST is desired (is supported but not enabled) */
+#define CONFIG_POST (CFG_POST_MEMORY | \
+ CFG_POST_CPU | \
+ CFG_POST_RTC | \
+ CFG_POST_I2C)
+
+#endif
/*
* Init Memory Controller:
*/
@@ -273,7 +296,16 @@
#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of On Chip SRAM */
#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+/* reserve some memory for POST and BOOT limit info */
+#define CFG_INIT_SP_OFFSET (CFG_GBL_DATA_OFFSET - 32)
+
+#ifdef CONFIG_POST /* reserve one word for POST Info */
+#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 4)
+#endif
+
+#ifdef CONFIG_BOOTCOUNT_LIMIT /* reserve 2 word for bootcount limit */
+#define CFG_BOOTCOUNT_ADDR (CFG_GBL_DATA_OFFSET - 12)
+#endif
/*
* Internal Definitions
@@ -298,7 +330,8 @@
***********************************************************/
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 1 /* PHY address */
-
+#define CONFIG_PHY_RESET_DELAY 300 /* Intel LXT971A needs this */
+#define CONFIG_PHY_CMD_DELAY 40 /* Intel LXT971A needs this */
/************************************************************
* RTC
***********************************************************/
diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h
index 8ff264b..bdb7a46 100644
--- a/include/configs/TOP5200.h
+++ b/include/configs/TOP5200.h
@@ -314,7 +314,19 @@
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_RTC_MPC5200 1 /* use 5200 RTC */
+#ifdef CONFIG_EVAL5200 /* M48T08 is available with the Evaluation board only */
+ #define CONFIG_RTC_MK48T59 1 /* use M48T08 on EVAL5200 */
+ #define RTC(reg) (0xf0010000+reg)
+ /* setup CS2 for M48T08. Must MAP 64kB */
+ #define CFG_CS2_START RTC(0)
+ #define CFG_CS2_SIZE 0x10000
+ /* setup CS2 configuration register: */
+ /* WaitP = 0, WaitX = 4, MX=0, AL=1, AA=1, CE=1 */
+ /* AS=2, DS=0, Bank=0, WTyp=0, WS=0, RS=0, WO=0, RO=0 */
+ #define CFG_CS2_CFG 0x00047800
+#else
+ #define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */
+#endif
/*
* Various low-level settings
diff --git a/include/configs/omap1610h2.h b/include/configs/omap1610h2.h
new file mode 100644
index 0000000..2eb65e2
--- /dev/null
+++ b/include/configs/omap1610h2.h
@@ -0,0 +1,178 @@
+/*
+ * (C) Copyright 2004
+ * Texas Instruments.
+ * Kshitij Gupta <kshitij@ti.com>
+ * Configuration settings for the TI OMAP 1610 H2 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * If we are developing, we might want to start armboot from ram
+ * so we MUST NOT initialize critical regs like mem-timing ...
+ */
+#define CONFIG_INIT_CRITICAL /* undef for developing */
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_ARM926EJS 1 /* This is an arm926ejs CPU core */
+#define CONFIG_OMAP 1 /* in a TI OMAP core */
+#define CONFIG_OMAP1610 1 /* which is in a 1610 */
+#define CONFIG_H2_OMAP1610 1 /* on an H2 Board */
+
+/* input clock of PLL */
+/* the OMAP1610 H2 has 12MHz input clock */
+#define CONFIG_SYS_CLK_FREQ 12000000
+
+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_LAN91C96_BASE 0x04000300
+#define CONFIG_LAN91C96_EXT_PHY
+
+/*
+ * NS16550 Configuration
+ */
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE (-4)
+#define CFG_NS16550_CLK (48000000) /* can be 12M/32Khz or 48Mhz */
+#define CFG_NS16550_COM1 0xfffb0000 /* uart1, bluetooth uart */
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on OMAP1610 H2 */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP)
+#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+#include <configs/omap1510.h>
+
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTARGS "mem=32M console=ttyS0,115200n8 noinitrd \
+ root=/dev/nfs rw nfsroot=157.87.82.48:\
+ /home/a0875451/mwd/myfs/target ip=dhcp"
+#define CONFIG_NETMASK 255.255.254.0 /* talk on MY local net */
+#define CONFIG_IPADDR 156.117.97.156 /* static IP I currently own */
+#define CONFIG_SERVERIP 156.117.97.139 /* current IP of my dev pc */
+#define CONFIG_BOOTFILE "uImage" /* file to load */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "OMAP1610 H2 # " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x10000000 /* memtest works on */
+#define CFG_MEMTEST_END 0x12000000 /* 32 MB in DRAM */
+
+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
+
+#define CFG_LOAD_ADDR 0x10000000 /* default load address */
+
+/* The 1610 has 6 timers, they can be driven by the RefClk (12Mhz) or by
+ * DPLL1. This time is further subdivided by a local divisor.
+ */
+#define CFG_TIMERBASE 0xFFFEC500 /* use timer 1 */
+#define CFG_PVT 7 /* 2^(pvt+1), divide by 256 */
+#define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT))
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (128*1024) /* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
+#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
+
+#ifdef CONFIG_CS0_BOOT
+#define PHYS_FLASH_1 0x0C000000
+#endif
+#ifdef CONFIG_CS3_BOOT
+#define PHYS_FLASH_1 0x00000000
+#endif
+
+#define CFG_FLASH_BASE PHYS_FLASH_1
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define PHYS_FLASH_SIZE 0x02000000 /* 32MB */
+#define CFG_MAX_FLASH_SECT (259) /* max number of sectors on one chip */
+/* addr of environment */
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x020000)
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT (20*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT (20*CFG_HZ) /* Timeout for Flash Write */
+
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */
+#define CFG_ENV_OFFSET 0x20000 /* environment starts here */
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/omap1610inn.h b/include/configs/omap1610inn.h
index 9bdd795..da8043d 100644
--- a/include/configs/omap1610inn.h
+++ b/include/configs/omap1610inn.h
@@ -151,7 +151,12 @@
#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
+#ifdef CONFIG_CS0_BOOT
+#define PHYS_FLASH_1 0x0C000000
+#endif
+#ifdef CONFIG_CS3_BOOT
+#define PHYS_FLASH_1 0x00000000
+#endif
#define CFG_FLASH_BASE PHYS_FLASH_1