blob: 8dd226729e2aa21813c0735d0d546da2e97f3b82 [file] [log] [blame]
/*
* (C) Copyright 2000-2006
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <commproc.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <watchdog.h>
#include "vecnum.h"
#ifdef CONFIG_SERIAL_MULTI
#include <serial.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_IOP480
#define SPU_BASE 0x40000000
#define spu_LineStat_rc 0x00 /* Line Status Register (Read/Clear) */
#define spu_LineStat_w 0x04 /* Line Status Register (Set) */
#define spu_Handshk_rc 0x08 /* Handshake Status Register (Read/Clear) */
#define spu_Handshk_w 0x0c /* Handshake Status Register (Set) */
#define spu_BRateDivh 0x10 /* Baud rate divisor high */
#define spu_BRateDivl 0x14 /* Baud rate divisor low */
#define spu_CtlReg 0x18 /* Control Register */
#define spu_RxCmd 0x1c /* Rx Command Register */
#define spu_TxCmd 0x20 /* Tx Command Register */
#define spu_RxBuff 0x24 /* Rx data buffer */
#define spu_TxBuff 0x24 /* Tx data buffer */
/*-----------------------------------------------------------------------------+
| Line Status Register.
+-----------------------------------------------------------------------------*/
#define asyncLSRport1 0x40000000
#define asyncLSRport1set 0x40000004
#define asyncLSRDataReady 0x80
#define asyncLSRFramingError 0x40
#define asyncLSROverrunError 0x20
#define asyncLSRParityError 0x10
#define asyncLSRBreakInterrupt 0x08
#define asyncLSRTxHoldEmpty 0x04
#define asyncLSRTxShiftEmpty 0x02
/*-----------------------------------------------------------------------------+
| Handshake Status Register.
+-----------------------------------------------------------------------------*/
#define asyncHSRport1 0x40000008
#define asyncHSRport1set 0x4000000c
#define asyncHSRDsr 0x80
#define asyncLSRCts 0x40
/*-----------------------------------------------------------------------------+
| Control Register.
+-----------------------------------------------------------------------------*/
#define asyncCRport1 0x40000018
#define asyncCRNormal 0x00
#define asyncCRLoopback 0x40
#define asyncCRAutoEcho 0x80
#define asyncCRDtr 0x20
#define asyncCRRts 0x10
#define asyncCRWordLength7 0x00
#define asyncCRWordLength8 0x08
#define asyncCRParityDisable 0x00
#define asyncCRParityEnable 0x04
#define asyncCREvenParity 0x00
#define asyncCROddParity 0x02
#define asyncCRStopBitsOne 0x00
#define asyncCRStopBitsTwo 0x01
#define asyncCRDisableDtrRts 0x00
/*-----------------------------------------------------------------------------+
| Receiver Command Register.
+-----------------------------------------------------------------------------*/
#define asyncRCRport1 0x4000001c
#define asyncRCRDisable 0x00
#define asyncRCREnable 0x80
#define asyncRCRIntDisable 0x00
#define asyncRCRIntEnabled 0x20
#define asyncRCRDMACh2 0x40
#define asyncRCRDMACh3 0x60
#define asyncRCRErrorInt 0x10
#define asyncRCRPauseEnable 0x08
/*-----------------------------------------------------------------------------+
| Transmitter Command Register.
+-----------------------------------------------------------------------------*/
#define asyncTCRport1 0x40000020
#define asyncTCRDisable 0x00
#define asyncTCREnable 0x80
#define asyncTCRIntDisable 0x00
#define asyncTCRIntEnabled 0x20
#define asyncTCRDMACh2 0x40
#define asyncTCRDMACh3 0x60
#define asyncTCRTxEmpty 0x10
#define asyncTCRErrorInt 0x08
#define asyncTCRStopPause 0x04
#define asyncTCRBreakGen 0x02
/*-----------------------------------------------------------------------------+
| Miscellanies defines.
+-----------------------------------------------------------------------------*/
#define asyncTxBufferport1 0x40000024
#define asyncRxBufferport1 0x40000024
#define asyncDLABLsbport1 0x40000014
#define asyncDLABMsbport1 0x40000010
#define asyncXOFFchar 0x13
#define asyncXONchar 0x11
/*
* Minimal serial functions needed to use one of the SMC ports
* as serial console interface.
*/
int serial_init (void)
{
volatile char val;
unsigned short br_reg;
br_reg = ((((CONFIG_CPUCLOCK * 1000000) / 16) / gd->baudrate) - 1);
/*
* Init onboard UART
*/
out_8((u8 *)SPU_BASE + spu_LineStat_rc, 0x78); /* Clear all bits in Line Status Reg */
out_8((u8 *)SPU_BASE + spu_BRateDivl, (br_reg & 0x00ff)); /* Set baud rate divisor... */
out_8((u8 *)SPU_BASE + spu_BRateDivh, ((br_reg & 0xff00) >> 8)); /* ... */
out_8((u8 *)SPU_BASE + spu_CtlReg, 0x08); /* Set 8 bits, no parity and 1 stop bit */
out_8((u8 *)SPU_BASE + spu_RxCmd, 0xb0); /* Enable Rx */
out_8((u8 *)SPU_BASE + spu_TxCmd, 0x9c); /* Enable Tx */
out_8((u8 *)SPU_BASE + spu_Handshk_rc, 0xff); /* Clear Handshake */
val = in_8((u8 *)SPU_BASE + spu_RxBuff); /* Dummy read, to clear receiver */
return (0);
}
void serial_setbrg (void)
{
unsigned short br_reg;
br_reg = ((((CONFIG_CPUCLOCK * 1000000) / 16) / gd->baudrate) - 1);
out_8((u8 *)SPU_BASE + spu_BRateDivl,
(br_reg & 0x00ff)); /* Set baud rate divisor... */
out_8((u8 *)SPU_BASE + spu_BRateDivh,
((br_reg & 0xff00) >> 8)); /* ... */
}
void serial_putc (const char c)
{
if (c == '\n')
serial_putc ('\r');
/* load status from handshake register */
if (in_8((u8 *)SPU_BASE + spu_Handshk_rc) != 00)
out_8((u8 *)SPU_BASE + spu_Handshk_rc, 0xff); /* Clear Handshake */
out_8((u8 *)SPU_BASE + spu_TxBuff, c); /* Put char */
while ((in_8((u8 *)SPU_BASE + spu_LineStat_rc) & 04) != 04) {
if (in_8((u8 *)SPU_BASE + spu_Handshk_rc) != 00)
out_8((u8 *)SPU_BASE + spu_Handshk_rc, 0xff); /* Clear Handshake */
}
}
void serial_puts (const char *s)
{
while (*s) {
serial_putc (*s++);
}
}
int serial_getc ()
{
unsigned char status = 0;
while (1) {
status = in_8((u8 *)asyncLSRport1);
if ((status & asyncLSRDataReady) != 0x0) {
break;
}
if ((status & ( asyncLSRFramingError |
asyncLSROverrunError |
asyncLSRParityError |
asyncLSRBreakInterrupt )) != 0) {
(void) out_8((u8 *)asyncLSRport1,
asyncLSRFramingError |
asyncLSROverrunError |
asyncLSRParityError |
asyncLSRBreakInterrupt );
}
}
return (0x000000ff & (int) in_8((u8 *)asyncRxBufferport1));
}
int serial_tstc ()
{
unsigned char status;
status = in_8((u8 *)asyncLSRport1);
if ((status & asyncLSRDataReady) != 0x0) {
return (1);
}
if ((status & ( asyncLSRFramingError |
asyncLSROverrunError |
asyncLSRParityError |
asyncLSRBreakInterrupt )) != 0) {
(void) out_8((u8 *)asyncLSRport1,
asyncLSRFramingError |
asyncLSROverrunError |
asyncLSRParityError |
asyncLSRBreakInterrupt);
}
return 0;
}
#endif /* CONFIG_IOP480 */