Merge git://git.denx.de/u-boot-socfpga
diff --git a/Licenses/r8a779x_usb3.txt b/Licenses/r8a779x_usb3.txt
new file mode 100644
index 0000000..e2afcc9
--- /dev/null
+++ b/Licenses/r8a779x_usb3.txt
@@ -0,0 +1,26 @@
+Copyright (c) 2014, Renesas Electronics Corporation
+All rights reserved.
+
+Redistribution and use in binary form, without modification, are permitted
+provided that the following conditions are met:
+
+1. Redistribution in binary form must reproduce the above copyright notice,
+ this list of conditions and the following disclaimer in the documentation
+ and/or other materials provided with the distribution.
+2. The name of Renesas Electronics Corporation may not be used to endorse or
+ promote products derived from this software without specific prior written
+ permission.
+3. Reverse engineering, decompilation, or disassembly of this software is
+ not permitted.
+
+THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS ELECTRONICS CORPORATION DISCLAIMS
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND
+NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL RENESAS ELECTRONICS
+CORPORATION BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
+OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
diff --git a/MAINTAINERS b/MAINTAINERS
index 2a20b94..41c881f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -452,6 +452,12 @@
T: git git://git.denx.de/u-boot-usb.git
F: drivers/usb/
+USB xHCI
+M: Bin Meng <bmeng.cn@gmail.com>
+S: Maintained
+T: git git://git.denx.de/u-boot-usb.git topic-xhci
+F: drivers/usb/host/xhci*
+
VIDEO
M: Anatolij Gustschin <agust@denx.de>
S: Maintained
diff --git a/README b/README
index 7a4f342..2df0e1f 100644
--- a/README
+++ b/README
@@ -2362,6 +2362,13 @@
CONFIG_SYS_BOOTCOUNT_ADDR = i2c addr which is used for
the bootcounter.
CONFIG_BOOTCOUNT_ALEN = address len
+ CONFIG_BOOTCOUNT_EXT
+ enable support for the bootcounter in EXT filesystem
+ CONFIG_SYS_BOOTCOUNT_ADDR = RAM address used for read
+ and write.
+ CONFIG_SYS_BOOTCOUNT_EXT_INTERFACE = interface
+ CONFIG_SYS_BOOTCOUNT_EXT_DEVPART = device and part
+ CONFIG_SYS_BOOTCOUNT_EXT_NAME = filename
- Show boot progress:
CONFIG_SHOW_BOOT_PROGRESS
diff --git a/arch/arm/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/dts/imx6qdl-icore-rqs.dtsi
index 8b9d5b4..816cdce 100644
--- a/arch/arm/dts/imx6qdl-icore-rqs.dtsi
+++ b/arch/arm/dts/imx6qdl-icore-rqs.dtsi
@@ -43,6 +43,11 @@
#include <dt-bindings/clock/imx6qdl-clock.h>
/ {
+ aliases {
+ mmc1 = &usdhc3;
+ mmc2 = &usdhc4;
+ };
+
memory {
reg = <0x10000000 0x80000000>;
};
@@ -100,6 +105,7 @@
};
&usdhc3 {
+ u-boot,dm-spl;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
@@ -165,6 +171,7 @@
};
pinctrl_usdhc3: usdhc3grp {
+ u-boot,dm-spl;
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17070
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10070
diff --git a/arch/arm/dts/imx6qdl-icore.dtsi b/arch/arm/dts/imx6qdl-icore.dtsi
index a485c3e..06d9bc3 100644
--- a/arch/arm/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/dts/imx6qdl-icore.dtsi
@@ -118,6 +118,7 @@
};
&usdhc1 {
+ u-boot,dm-spl;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
@@ -208,6 +209,7 @@
};
pinctrl_usdhc1: usdhc1grp {
+ u-boot,dm-spl;
fsl,pins = <
MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17070
MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10070
diff --git a/arch/arm/dts/imx6qdl.dtsi b/arch/arm/dts/imx6qdl.dtsi
index b13b0b2..e04b570 100644
--- a/arch/arm/dts/imx6qdl.dtsi
+++ b/arch/arm/dts/imx6qdl.dtsi
@@ -77,6 +77,7 @@
compatible = "simple-bus";
interrupt-parent = <&gpc>;
ranges;
+ u-boot,dm-spl;
dma_apbh: dma-apbh@00110000 {
compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
@@ -225,6 +226,7 @@
#size-cells = <1>;
reg = <0x02000000 0x100000>;
ranges;
+ u-boot,dm-spl;
spba-bus@02000000 {
compatible = "fsl,spba-bus", "simple-bus";
@@ -516,6 +518,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ u-boot,dm-spl;
};
gpio2: gpio@020a0000 {
@@ -805,6 +808,7 @@
iomuxc: iomuxc@020e0000 {
compatible = "fsl,imx6dl-iomuxc", "fsl,imx6q-iomuxc";
reg = <0x020e0000 0x4000>;
+ u-boot,dm-spl;
};
ldb: ldb@020e0008 {
@@ -889,6 +893,7 @@
#size-cells = <1>;
reg = <0x02100000 0x100000>;
ranges;
+ u-boot,dm-spl;
crypto: caam@2100000 {
compatible = "fsl,sec-v4.0";
diff --git a/arch/arm/dts/imx6ul-geam-kit.dts b/arch/arm/dts/imx6ul-geam-kit.dts
index 07c21cb..15e3f94 100644
--- a/arch/arm/dts/imx6ul-geam-kit.dts
+++ b/arch/arm/dts/imx6ul-geam-kit.dts
@@ -87,6 +87,7 @@
};
&usdhc1 {
+ u-boot,dm-spl;
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>;
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
@@ -134,6 +135,7 @@
};
pinctrl_usdhc1: usdhc1grp {
+ u-boot,dm-spl;
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
@@ -145,6 +147,7 @@
};
pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ u-boot,dm-spl;
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9
@@ -156,6 +159,7 @@
};
pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ u-boot,dm-spl;
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9
diff --git a/arch/arm/dts/imx6ul-isiot-emmc.dts b/arch/arm/dts/imx6ul-isiot-emmc.dts
index 677de96..a611e3b 100644
--- a/arch/arm/dts/imx6ul-isiot-emmc.dts
+++ b/arch/arm/dts/imx6ul-isiot-emmc.dts
@@ -50,6 +50,7 @@
};
&usdhc2 {
+ u-boot,dm-spl;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
@@ -60,6 +61,7 @@
&iomuxc {
pinctrl_usdhc2: usdhc2grp {
+ u-boot,dm-spl;
fsl,pins = <
MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17070
MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x10070
diff --git a/arch/arm/dts/imx6ul-isiot.dtsi b/arch/arm/dts/imx6ul-isiot.dtsi
index 9a3c35c..5007a88 100644
--- a/arch/arm/dts/imx6ul-isiot.dtsi
+++ b/arch/arm/dts/imx6ul-isiot.dtsi
@@ -82,6 +82,7 @@
};
&usdhc1 {
+ u-boot,dm-spl;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
@@ -128,6 +129,7 @@
};
pinctrl_usdhc1: usdhc1grp {
+ u-boot,dm-spl;
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
diff --git a/arch/arm/dts/imx6ul.dtsi b/arch/arm/dts/imx6ul.dtsi
index def5f8c..7affab8 100644
--- a/arch/arm/dts/imx6ul.dtsi
+++ b/arch/arm/dts/imx6ul.dtsi
@@ -134,6 +134,7 @@
compatible = "simple-bus";
interrupt-parent = <&gpc>;
ranges;
+ u-boot,dm-spl;
pmu {
compatible = "arm,cortex-a7-pmu";
@@ -185,6 +186,7 @@
#size-cells = <1>;
reg = <0x02000000 0x100000>;
ranges;
+ u-boot,dm-spl;
spba-bus@02000000 {
compatible = "fsl,spba-bus", "simple-bus";
@@ -415,6 +417,7 @@
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 23 10>, <&iomuxc 10 17 6>,
<&iomuxc 16 33 16>;
+ u-boot,dm-spl;
};
gpio2: gpio@020a0000 {
@@ -451,6 +454,7 @@
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 94 17>, <&iomuxc 17 117 12>;
+ u-boot,dm-spl;
};
gpio5: gpio@020ac000 {
@@ -649,6 +653,7 @@
iomuxc: iomuxc@020e0000 {
compatible = "fsl,imx6ul-iomuxc";
reg = <0x020e0000 0x4000>;
+ u-boot,dm-spl;
};
gpr: iomuxc-gpr@020e4000 {
@@ -729,6 +734,7 @@
#size-cells = <1>;
reg = <0x02100000 0x100000>;
ranges;
+ u-boot,dm-spl;
usbotg1: usb@02184000 {
compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
diff --git a/arch/arm/include/asm/arch-mx5/crm_regs.h b/arch/arm/include/asm/arch-mx5/crm_regs.h
index b61c7b9..7fea569 100644
--- a/arch/arm/include/asm/arch-mx5/crm_regs.h
+++ b/arch/arm/include/asm/arch-mx5/crm_regs.h
@@ -210,6 +210,14 @@
#define MXC_CCM_CSCMR1_SSI_EXT2_COM_CLK_SEL (0x1 << 1)
#define MXC_CCM_CSCMR1_SSI_EXT1_COM_CLK_SEL 0x1
+/* Define the bits in register CSCMR2 */
+#define MXC_CCM_CSCMR2_DI0_CLK_SEL_OFFSET 26
+#define MXC_CCM_CSCMR2_DI0_CLK_SEL_MASK (0x7 << 26)
+#define MXC_CCM_CSCMR2_DI0_CLK_SEL(v) (((v) & 0x7) << 26)
+#define MXC_CCM_CSCMR2_DI0_CLK_SEL_RD(r) (((r) >> 26) & 0x7)
+
+#define MXC_CCM_CSCMR2_DI0_CLK_SEL_LDB_DI0_CLK 5
+
/* Define the bits in register CSCDR2 */
#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_OFFSET 25
#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_MASK (0x7 << 25)
diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h
index 3e79fa3..61c8d44 100644
--- a/arch/arm/include/asm/arch-mx5/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx5/imx-regs.h
@@ -416,6 +416,39 @@
};
#endif
+#define IOMUXC_GPR2_BITMAP_SPWG 0
+#define IOMUXC_GPR2_BITMAP_JEIDA 1
+
+#define IOMUXC_GPR2_BIT_MAPPING_CH0_OFFSET 6
+#define IOMUXC_GPR2_BIT_MAPPING_CH0_MASK (1 << IOMUXC_GPR2_BIT_MAPPING_CH0_OFFSET)
+#define IOMUXC_GPR2_BIT_MAPPING_CH0_JEIDA (IOMUXC_GPR2_BITMAP_JEIDA << \
+ IOMUXC_GPR2_BIT_MAPPING_CH0_OFFSET)
+#define IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG (IOMUXC_GPR2_BITMAP_SPWG << \
+ IOMUXC_GPR2_BIT_MAPPING_CH0_OFFSET)
+
+#define IOMUXC_GPR2_DATA_WIDTH_18 0
+#define IOMUXC_GPR2_DATA_WIDTH_24 1
+
+#define IOMUXC_GPR2_DATA_WIDTH_CH0_OFFSET 5
+#define IOMUXC_GPR2_DATA_WIDTH_CH0_MASK (1 << IOMUXC_GPR2_DATA_WIDTH_CH0_OFFSET)
+#define IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT (IOMUXC_GPR2_DATA_WIDTH_18 << \
+ IOMUXC_GPR2_DATA_WIDTH_CH0_OFFSET)
+#define IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT (IOMUXC_GPR2_DATA_WIDTH_24 << \
+ IOMUXC_GPR2_DATA_WIDTH_CH0_OFFSET)
+
+#define IOMUXC_GPR2_MODE_DISABLED 0
+#define IOMUXC_GPR2_MODE_ENABLED_DI0 1
+#define IOMUXC_GPR2_MODE_ENABLED_DI1 3
+
+#define IOMUXC_GPR2_LVDS_CH0_MODE_OFFSET 0
+#define IOMUXC_GPR2_LVDS_CH0_MODE_MASK (3 << IOMUXC_GPR2_LVDS_CH0_MODE_OFFSET)
+#define IOMUXC_GPR2_LVDS_CH0_MODE_DISABLED (IOMUXC_GPR2_MODE_DISABLED << \
+ IOMUXC_GPR2_LVDS_CH0_MODE_OFFSET)
+#define IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0 (IOMUXC_GPR2_MODE_ENABLED_DI0 << \
+ IOMUXC_GPR2_LVDS_CH0_MODE_OFFSET)
+#define IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI1 (IOMUXC_GPR2_MODE_ENABLED_DI1 << \
+ IOMUXC_GPR2_LVDS_CH0_MODE_OFFSET)
+
/* System Reset Controller (SRC) */
struct src {
u32 scr;
@@ -508,6 +541,23 @@
};
#endif
+#define PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4)
+#define PWMCR_DOZEEN (1 << 24)
+#define PWMCR_WAITEN (1 << 23)
+#define PWMCR_DBGEN (1 << 22)
+#define PWMCR_CLKSRC_IPG_HIGH (2 << 16)
+#define PWMCR_CLKSRC_IPG (1 << 16)
+#define PWMCR_EN (1 << 0)
+
+struct pwm_regs {
+ u32 cr;
+ u32 sr;
+ u32 ir;
+ u32 sar;
+ u32 pr;
+ u32 cnr;
+};
+
#endif /* __ASSEMBLER__*/
#endif /* __ASM_ARCH_MX5_IMX_REGS_H__ */
diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
index 624ccec..7736b6a 100644
--- a/arch/arm/include/asm/arch-mx6/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
@@ -367,7 +367,7 @@
#include <asm/types.h>
/* only for i.MX6SX/UL */
-#define WDOG3_BASE_ADDR ((is_mx6ul() ? \
+#define WDOG3_BASE_ADDR (((is_mx6ul() || is_mx6ull()) ? \
MX6UL_WDOG3_BASE_ADDR : MX6SX_WDOG3_BASE_ADDR))
#define LCDIF1_BASE_ADDR ((is_cpu_type(MXC_CPU_MX6SLL)) ? \
MX6SLL_LCDIF_BASE_ADDR : \
diff --git a/arch/arm/include/asm/arch-rockchip/grf_rk3399.h b/arch/arm/include/asm/arch-rockchip/grf_rk3399.h
index 8d21eb7..b541e2c 100644
--- a/arch/arm/include/asm/arch-rockchip/grf_rk3399.h
+++ b/arch/arm/include/asm/arch-rockchip/grf_rk3399.h
@@ -589,7 +589,12 @@
PMUGRF_GPIO1C3_SEL_SHIFT = 6,
PMUGRF_GPIO1C3_SEL_MASK = 3 << PMUGRF_GPIO1C3_SEL_SHIFT,
PMUGRF_PWM_2 = 1,
-
+ PMUGRF_GPIO1C4_SEL_SHIFT = 8,
+ PMUGRF_GPIO1C4_SEL_MASK = 3 << PMUGRF_GPIO1C4_SEL_SHIFT,
+ PMUGRF_I2C8PMU_SDA = 1,
+ PMUGRF_GPIO1C5_SEL_SHIFT = 10,
+ PMUGRF_GPIO1C5_SEL_MASK = 3 << PMUGRF_GPIO1C5_SEL_SHIFT,
+ PMUGRF_I2C8PMU_SCL = 1,
};
/* GRF_SOC_CON5 */
diff --git a/arch/arm/include/asm/arch-rockchip/periph.h b/arch/arm/include/asm/arch-rockchip/periph.h
index 9f4bc2e..77cf5b9 100644
--- a/arch/arm/include/asm/arch-rockchip/periph.h
+++ b/arch/arm/include/asm/arch-rockchip/periph.h
@@ -24,6 +24,9 @@
PERIPH_ID_I2C3,
PERIPH_ID_I2C4,
PERIPH_ID_I2C5,
+ PERIPH_ID_I2C6,
+ PERIPH_ID_I2C7,
+ PERIPH_ID_I2C8,
PERIPH_ID_SPI0,
PERIPH_ID_SPI1,
PERIPH_ID_SPI2,
diff --git a/arch/arm/include/asm/mach-imx/sys_proto.h b/arch/arm/include/asm/mach-imx/sys_proto.h
index 7036343..a80a392 100644
--- a/arch/arm/include/asm/mach-imx/sys_proto.h
+++ b/arch/arm/include/asm/mach-imx/sys_proto.h
@@ -105,7 +105,7 @@
void init_aips(void);
void init_src(void);
-void imx_set_wdog_powerdown(bool enable);
+void imx_wdog_disable_powerdown(void);
int board_mmc_get_env_dev(int devno);
diff --git a/arch/arm/mach-imx/init.c b/arch/arm/mach-imx/init.c
index 720ad67..0aa8295 100644
--- a/arch/arm/mach-imx/init.c
+++ b/arch/arm/mach-imx/init.c
@@ -65,7 +65,7 @@
}
}
-void imx_set_wdog_powerdown(bool enable)
+void imx_wdog_disable_powerdown(void)
{
struct wdog_regs *wdog1 = (struct wdog_regs *)WDOG1_BASE_ADDR;
struct wdog_regs *wdog2 = (struct wdog_regs *)WDOG2_BASE_ADDR;
@@ -75,13 +75,13 @@
#endif
/* Write to the PDE (Power Down Enable) bit */
- writew(enable, &wdog1->wmcr);
- writew(enable, &wdog2->wmcr);
+ writew(0, &wdog1->wmcr);
+ writew(0, &wdog2->wmcr);
- if (is_mx6sx() || is_mx6ul() || is_mx7())
- writew(enable, &wdog3->wmcr);
+ if (is_mx6sx() || is_mx6ul() || is_mx6ull() || is_mx7())
+ writew(0, &wdog3->wmcr);
#ifdef CONFIG_MX7D
- writew(enable, &wdog4->wmcr);
+ writew(0, &wdog4->wmcr);
#endif
}
diff --git a/arch/arm/mach-imx/mx5/Kconfig b/arch/arm/mach-imx/mx5/Kconfig
index d96020d..250194b 100644
--- a/arch/arm/mach-imx/mx5/Kconfig
+++ b/arch/arm/mach-imx/mx5/Kconfig
@@ -46,6 +46,12 @@
select BOARD_LATE_INIT
select MX53
+config TARGET_MX53PPD
+ bool "Support mx53ppd"
+ select MX53
+ help
+ Enable support for the GE Healthcare PPD.
+
config TARGET_MX53SMD
bool "Support mx53smd"
select MX53
@@ -70,6 +76,7 @@
source "board/freescale/mx53evk/Kconfig"
source "board/freescale/mx53loco/Kconfig"
source "board/freescale/mx53smd/Kconfig"
+source "board/ge/mx53ppd/Kconfig"
source "board/inversepath/usbarmory/Kconfig"
source "board/technologic/ts4800/Kconfig"
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index fd73c67..bee7eab 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -109,6 +109,7 @@
config TARGET_CGTQMX6EVAL
bool "cgtqmx6eval"
+ select MX6QDL
select BOARD_LATE_INIT
select SUPPORT_SPL
select DM
@@ -117,6 +118,7 @@
config TARGET_CM_FX6
bool "CM-FX6"
select SUPPORT_SPL
+ select MX6QDL
select DM
select DM_SERIAL
select DM_GPIO
@@ -131,6 +133,7 @@
config TARGET_DHCOMIMX6
bool "dh_imx6"
+ select MX6QDL
select BOARD_LATE_INIT
select BOARD_EARLY_INIT_F
select SUPPORT_SPL
@@ -165,6 +168,7 @@
config TARGET_GW_VENTANA
bool "gw_ventana"
+ select MX6QDL
select SUPPORT_SPL
imply CMD_SATA
imply CMD_SPL
@@ -176,10 +180,12 @@
config TARGET_MCCMON6
bool "mccmon6"
+ select MX6QDL
select SUPPORT_SPL
config TARGET_MX6CUBOXI
bool "Solid-run mx6 boards"
+ select MX6QDL
select BOARD_LATE_INIT
select SUPPORT_SPL
@@ -199,8 +205,8 @@
config TARGET_MX6QARM2
bool "mx6qarm2"
-config TARGET_MX6Q_ICORE
- bool "Support Engicam i.Core"
+config TARGET_MX6Q_ENGICAM
+ bool "Support Engicam i.Core(RQS)"
select BOARD_LATE_INIT
select MX6QDL
select OF_CONTROL
@@ -213,24 +219,14 @@
select DM_THERMAL
select SUPPORT_SPL
select SPL_LOAD_FIT
-
-config TARGET_MX6Q_ICORE_RQS
- bool "Support Engicam i.Core RQS"
- select BOARD_LATE_INIT
- select MX6QDL
- select OF_CONTROL
- select SPL_OF_LIBFDT
- select DM
- select DM_ETH
- select DM_GPIO
- select DM_I2C
- select DM_MMC
- select DM_THERMAL
- select SUPPORT_SPL
- select SPL_LOAD_FIT
+ select SPL_DM if SPL
+ select SPL_OF_CONTROL if SPL
+ select SPL_SEPARATE_BSS if SPL
+ select SPL_PINCTRL if SPL
config TARGET_MX6SABREAUTO
bool "mx6sabreauto"
+ select MX6QDL
select BOARD_LATE_INIT
select SUPPORT_SPL
select DM
@@ -239,6 +235,7 @@
config TARGET_MX6SABRESD
bool "mx6sabresd"
+ select MX6QDL
select BOARD_LATE_INIT
select SUPPORT_SPL
select DM
@@ -288,8 +285,8 @@
select DM_THERMAL
select SUPPORT_SPL
-config TARGET_MX6UL_GEAM
- bool "Support Engicam GEAM6UL"
+config TARGET_MX6UL_ENGICAM
+ bool "Support Engicam GEAM6UL/Is.IoT"
select BOARD_LATE_INIT
select MX6UL
select OF_CONTROL
@@ -300,18 +297,10 @@
select DM_MMC
select DM_THERMAL
select SUPPORT_SPL
-config TARGET_MX6UL_ISIOT
- bool "Support Engicam Is.IoT MX6UL"
- select BOARD_LATE_INIT
- select MX6UL
- select OF_CONTROL
- select DM
- select DM_ETH
- select DM_GPIO
- select DM_I2C
- select DM_MMC
- select DM_THERMAL
- select SUPPORT_SPL
+ select SPL_DM if SPL
+ select SPL_OF_CONTROL if SPL
+ select SPL_SEPARATE_BSS if SPL
+ select SPL_PINCTRL if SPL
config TARGET_MX6ULL_14X14_EVK
bool "Support mx6ull_14x14_evk"
@@ -360,6 +349,7 @@
config TARGET_PFLA02
bool "Phytec PFLA02 (PhyFlex) i.MX6 Quad"
+ select MX6QDL
select BOARD_LATE_INIT
select SUPPORT_SPL
@@ -378,6 +368,7 @@
config TARGET_UDOO
bool "udoo"
+ select MX6QDL
select BOARD_LATE_INIT
select SUPPORT_SPL
@@ -398,6 +389,7 @@
config TARGET_WANDBOARD
bool "wandboard"
+ select MX6QDL
select BOARD_LATE_INIT
select SUPPORT_SPL
@@ -446,10 +438,8 @@
source "board/dhelectronics/dh_imx6/Kconfig"
source "board/el/el6x/Kconfig"
source "board/embest/mx6boards/Kconfig"
-source "board/engicam/geam6ul/Kconfig"
-source "board/engicam/icorem6/Kconfig"
-source "board/engicam/icorem6_rqs/Kconfig"
-source "board/engicam/isiotmx6ul/Kconfig"
+source "board/engicam/imx6q/Kconfig"
+source "board/engicam/imx6ul/Kconfig"
source "board/freescale/mx6qarm2/Kconfig"
source "board/freescale/mx6sabreauto/Kconfig"
source "board/freescale/mx6sabresd/Kconfig"
diff --git a/arch/arm/mach-imx/mx6/soc.c b/arch/arm/mach-imx/mx6/soc.c
index ad72c12..43cb581 100644
--- a/arch/arm/mach-imx/mx6/soc.c
+++ b/arch/arm/mach-imx/mx6/soc.c
@@ -436,7 +436,7 @@
if (is_mx6sl())
setbits_le32(&ccm->cscmr1, MXC_CCM_CSCMR1_PER_CLK_SEL_MASK);
- imx_set_wdog_powerdown(false); /* Disable PDE bit of WMCR register */
+ imx_wdog_disable_powerdown(); /* Disable PDE bit of WMCR register */
if (is_mx6sx())
setbits_le32(&ccm->cscdr1, MXC_CCM_CSCDR1_UART_CLK_SEL);
diff --git a/arch/arm/mach-imx/mx7/soc.c b/arch/arm/mach-imx/mx7/soc.c
index 87bf105..d160e80 100644
--- a/arch/arm/mach-imx/mx7/soc.c
+++ b/arch/arm/mach-imx/mx7/soc.c
@@ -236,7 +236,7 @@
init_csu();
/* Disable PDE bit of WMCR register */
- imx_set_wdog_powerdown(false);
+ imx_wdog_disable_powerdown();
imx_enet_mdio_fixup();
diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile
index 2127f2b..7e1f8643 100644
--- a/arch/arm/mach-rockchip/Makefile
+++ b/arch/arm/mach-rockchip/Makefile
@@ -23,9 +23,11 @@
ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
-ifneq ($(CONFIG_ROCKCHIP_BOOT_MODE_REG),0)
+# Always include boot_mode.o, as we bypass it (i.e. turn it off)
+# inside of boot_mode.c when CONFIG_BOOT_MODE_REG is 0. This way,
+# we can have the preprocessor correctly recognise both 0x0 and 0
+# meaning "turn it off".
obj-y += boot_mode.o
-endif
obj-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board.o
obj-$(CONFIG_ROCKCHIP_RK322X) += rk322x-board.o
diff --git a/arch/arm/mach-rockchip/boot_mode.c b/arch/arm/mach-rockchip/boot_mode.c
index 942849f..d7dd425 100644
--- a/arch/arm/mach-rockchip/boot_mode.c
+++ b/arch/arm/mach-rockchip/boot_mode.c
@@ -9,6 +9,15 @@
#include <asm/io.h>
#include <asm/arch/boot_mode.h>
+#if (CONFIG_ROCKCHIP_BOOT_MODE_REG == 0)
+
+int setup_boot_mode(void)
+{
+ return 0;
+}
+
+#else
+
void set_back_to_bootrom_dnl_flag(void)
{
writel(BOOT_BROM_DOWNLOAD, CONFIG_ROCKCHIP_BOOT_MODE_REG);
@@ -74,3 +83,5 @@
return 0;
}
+
+#endif
diff --git a/board/compulab/cm_t54/cm_t54.c b/board/compulab/cm_t54/cm_t54.c
index 31730a4..3e6235a 100644
--- a/board/compulab/cm_t54/cm_t54.c
+++ b/board/compulab/cm_t54/cm_t54.c
@@ -246,7 +246,7 @@
return ret;
}
-void usb_hub_reset_devices(int port)
+void usb_hub_reset_devices(struct usb_hub_device *hub, int port)
{
/* The LAN9730 needs to be reset after the port power has been set. */
if (port == 3) {
diff --git a/board/dhelectronics/dh_imx6/dh_imx6_spl.c b/board/dhelectronics/dh_imx6/dh_imx6_spl.c
index e22ff5c..bb98f39 100644
--- a/board/dhelectronics/dh_imx6/dh_imx6_spl.c
+++ b/board/dhelectronics/dh_imx6/dh_imx6_spl.c
@@ -140,40 +140,39 @@
};
static const struct mx6_mmdc_calibration dhcom_mmdc_calib = {
- .p0_mpwldectrl0 = 0x001F001F,
- .p0_mpwldectrl1 = 0x001F001F,
- .p1_mpwldectrl0 = 0x00440044,
- .p1_mpwldectrl1 = 0x00440044,
- .p0_mpdgctrl0 = 0x434B0350,
- .p0_mpdgctrl1 = 0x034C0359,
- .p1_mpdgctrl0 = 0x434B0350,
- .p1_mpdgctrl1 = 0x03650348,
- .p0_mprddlctl = 0x4436383B,
- .p1_mprddlctl = 0x39393341,
- .p0_mpwrdlctl = 0x35373933,
- .p1_mpwrdlctl = 0x48254A36,
+ .p0_mpwldectrl0 = 0x0011000E,
+ .p0_mpwldectrl1 = 0x000E001B,
+ .p1_mpwldectrl0 = 0x00190015,
+ .p1_mpwldectrl1 = 0x00070018,
+ .p0_mpdgctrl0 = 0x42720306,
+ .p0_mpdgctrl1 = 0x026F0266,
+ .p1_mpdgctrl0 = 0x4273030A,
+ .p1_mpdgctrl1 = 0x02740240,
+ .p0_mprddlctl = 0x45393B3E,
+ .p1_mprddlctl = 0x403A3747,
+ .p0_mpwrdlctl = 0x40434541,
+ .p1_mpwrdlctl = 0x473E4A3B,
};
static const struct mx6_ddr3_cfg dhcom_mem_ddr = {
.mem_speed = 1600,
- .density = 4,
+ .density = 2,
.width = 64,
.banks = 8,
.rowaddr = 14,
.coladdr = 10,
.pagesz = 2,
- .trcd = 1375,
- .trcmin = 4875,
- .trasmin = 3500,
+ .trcd = 1312,
+ .trcmin = 5863,
+ .trasmin = 3750,
};
static const struct mx6_ddr_sysinfo dhcom_ddr_info = {
/* width of data bus:0=16,1=32,2=64 */
.dsize = 2,
- /* config for full 4GB range so that get_mem_size() works */
- .cs_density = 32, /* 32Gb per CS */
+ .cs_density = 16,
.ncs = 1, /* single chip select */
- .cs1_mirror = 0,
+ .cs1_mirror = 1,
.rtt_wr = 1, /* DDR3_RTT_60_OHM, RTT_Wr = RZQ/4 */
.rtt_nom = 1, /* DDR3_RTT_60_OHM, RTT_Nom = RZQ/4 */
.walat = 1, /* Write additional latency */
@@ -182,6 +181,8 @@
.bi_on = 1, /* Bank interleaving enabled */
.sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */
.rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */
+ .refsel = 1, /* Refresh cycles at 32KHz */
+ .refr = 3, /* 4 refresh commands per refresh cycle */
};
static void ccgr_init(void)
@@ -388,7 +389,6 @@
/* Perform DDR DRAM calibration */
udelay(100);
- mmdc_do_write_level_calibration(&dhcom_ddr_info);
mmdc_do_dqs_calibration(&dhcom_ddr_info);
/* Clear the BSS. */
diff --git a/board/engicam/common/board.c b/board/engicam/common/board.c
index c7ec55f..f633c71 100644
--- a/board/engicam/common/board.c
+++ b/board/engicam/common/board.c
@@ -32,6 +32,30 @@
}
#endif
+static void setenv_fdt_file(void)
+{
+ const char *cmp_dtb = CONFIG_DEFAULT_DEVICE_TREE;
+
+ if (!strcmp(cmp_dtb, "imx6q-icore")) {
+ if (is_mx6dq())
+ env_set("fdt_file", "imx6q-icore.dtb");
+ else if(is_mx6dl() || is_mx6solo())
+ env_set("fdt_file", "imx6dl-icore.dtb");
+ } else if (!strcmp(cmp_dtb, "imx6q-icore-rqs")) {
+ if (is_mx6dq())
+ env_set("fdt_file", "imx6q-icore-rqs.dtb");
+ else if(is_mx6dl() || is_mx6solo())
+ env_set("fdt_file", "imx6dl-icore-rqs.dtb");
+ } else if (!strcmp(cmp_dtb, "imx6ul-geam-kit"))
+ env_set("fdt_file", "imx6ul-geam-kit.dtb");
+ else if (!strcmp(cmp_dtb, "imx6ul-isiot-mmc"))
+ env_set("fdt_file", "imx6ul-isiot-emmc.dtb");
+ else if (!strcmp(cmp_dtb, "imx6ul-isiot-emmc"))
+ env_set("fdt_file", "imx6ul-isiot-emmc.dtb");
+ else if (!strcmp(cmp_dtb, "imx6ul-isiot-nand"))
+ env_set("fdt_file", "imx6ul-isiot-nand.dtb");
+}
+
int board_late_init(void)
{
switch ((imx6_src_get_boot_mode() & IMX6_BMODE_MASK) >>
diff --git a/board/engicam/common/board.h b/board/engicam/common/board.h
index f364a23..c720b0b 100644
--- a/board/engicam/common/board.h
+++ b/board/engicam/common/board.h
@@ -6,7 +6,6 @@
#ifndef _BOARD_H_
#define _BOARD_H_
-void setenv_fdt_file(void);
void setup_gpmi_nand(void);
void setup_display(void);
#endif /* _BOARD_H_ */
diff --git a/board/engicam/common/spl.c b/board/engicam/common/spl.c
index 8711418..6e2389d 100644
--- a/board/engicam/common/spl.c
+++ b/board/engicam/common/spl.c
@@ -39,6 +39,48 @@
#endif
};
+#ifdef CONFIG_SPL_LOAD_FIT
+int board_fit_config_name_match(const char *name)
+{
+ if (is_mx6dq() && !strcmp(name, "imx6q-icore"))
+ return 0;
+ else if (is_mx6dq() && !strcmp(name, "imx6q-icore-rqs"))
+ return 0;
+ else if ((is_mx6dl() || is_mx6solo()) && !strcmp(name, "imx6dl-icore"))
+ return 0;
+ else if ((is_mx6dl() || is_mx6solo()) && !strcmp(name, "imx6dl-icore-rqs"))
+ return 0;
+ else
+ return -1;
+}
+#endif
+
+#ifdef CONFIG_ENV_IS_IN_MMC
+void board_boot_order(u32 *spl_boot_list)
+{
+ u32 bmode = imx6_src_get_boot_mode();
+ u8 boot_dev = BOOT_DEVICE_MMC1;
+
+ switch ((bmode & IMX6_BMODE_MASK) >> IMX6_BMODE_SHIFT) {
+ case IMX6_BMODE_SD:
+ case IMX6_BMODE_ESD:
+ /* SD/eSD - BOOT_DEVICE_MMC1 */
+ break;
+ case IMX6_BMODE_MMC:
+ case IMX6_BMODE_EMMC:
+ /* MMC/eMMC */
+ boot_dev = BOOT_DEVICE_MMC2;
+ break;
+ default:
+ /* Default - BOOT_DEVICE_MMC1 */
+ printf("Wrong board boot order\n");
+ break;
+ }
+
+ spl_boot_list[0] = boot_dev;
+}
+#endif
+
#ifdef CONFIG_SPL_OS_BOOT
int spl_start_uboot(void)
{
diff --git a/board/engicam/geam6ul/MAINTAINERS b/board/engicam/geam6ul/MAINTAINERS
deleted file mode 100644
index 2b882d2..0000000
--- a/board/engicam/geam6ul/MAINTAINERS
+++ /dev/null
@@ -1,8 +0,0 @@
-GEAM6UL BOARD
-M: Jagan Teki <jagan@amarulasolutions.com>
-S: Maintained
-F: board/engicam/geam6ul
-F: include/configs/imx6-engicam.h
-F: configs/imx6ul_geam_mmc_defconfig
-F: configs/imx6ul_geam_nand_defconfig
-F: arch/arm/dts/imx6ul-geam-kit.dts
diff --git a/board/engicam/geam6ul/Makefile b/board/engicam/geam6ul/Makefile
deleted file mode 100644
index 0e367e2..0000000
--- a/board/engicam/geam6ul/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# Copyright (C) 2016 Amarula Solutions B.V.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := geam6ul.o
diff --git a/board/engicam/geam6ul/README b/board/engicam/geam6ul/README
deleted file mode 100644
index 0df6ae4..0000000
--- a/board/engicam/geam6ul/README
+++ /dev/null
@@ -1,28 +0,0 @@
-How to use U-Boot on Engicam GEAM6UL Starter Kit:
--------------------------------------------------
-
-- Configure U-Boot for Engicam GEAM6UL:
-
-$ make mrproper
-$ make imx6ul_geam_mmc_defconfig
-$ make
-
-This will generate the SPL image called SPL and the u-boot-dtb.img.
-
-- Flash the SPL image into the micro SD card:
-
-sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
-
-- Flash the u-boot-dtb.img image into the micro SD card:
-
-sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 bs=1k seek=69; sync
-
-- Jumper settings:
-
-MMC Boot: JM3 Closed
-
-- Connect the Serial cable between the Starter Kit and the PC for the console.
-(J28 is the Linux Serial console connector)
-
-- Insert the micro SD card in the board, power it up and U-Boot messages should
-come up.
diff --git a/board/engicam/geam6ul/geam6ul.c b/board/engicam/geam6ul/geam6ul.c
deleted file mode 100644
index ffd383a..0000000
--- a/board/engicam/geam6ul/geam6ul.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * Copyright (C) 2016 Amarula Solutions B.V.
- * Copyright (C) 2016 Engicam S.r.l.
- * Author: Jagan Teki <jagan@amarulasolutions.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mmc.h>
-
-#include <asm/io.h>
-#include <asm/gpio.h>
-#include <linux/sizes.h>
-
-#include <asm/arch/clock.h>
-#include <asm/arch/crm_regs.h>
-#include <asm/arch/iomux.h>
-#include <asm/arch/mx6-pins.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/mach-imx/iomux-v3.h>
-
-#include "../common/board.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_NAND_MXS
-
-#define GPMI_PAD_CTRL0 (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
-#define GPMI_PAD_CTRL1 (PAD_CTL_DSE_40ohm | PAD_CTL_SPEED_MED | \
- PAD_CTL_SRE_FAST)
-#define GPMI_PAD_CTRL2 (GPMI_PAD_CTRL0 | GPMI_PAD_CTRL1)
-
-static iomux_v3_cfg_t const nand_pads[] = {
- IOMUX_PADS(PAD_NAND_DATA00__RAWNAND_DATA00 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_DATA01__RAWNAND_DATA01 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_DATA02__RAWNAND_DATA02 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_DATA03__RAWNAND_DATA03 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_DATA04__RAWNAND_DATA04 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_DATA05__RAWNAND_DATA05 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_DATA06__RAWNAND_DATA06 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_DATA07__RAWNAND_DATA07 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_CLE__RAWNAND_CLE | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_ALE__RAWNAND_ALE | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_CE0_B__RAWNAND_CE0_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_RE_B__RAWNAND_RE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_WE_B__RAWNAND_WE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_WP_B__RAWNAND_WP_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_READY_B__RAWNAND_READY_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
-};
-
-void setup_gpmi_nand(void)
-{
- struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
-
- /* config gpmi nand iomux */
- SETUP_IOMUX_PADS(nand_pads);
-
- clrbits_le32(&mxc_ccm->CCGR4,
- MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
- MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
- MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
- MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
- MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK);
-
- /*
- * config gpmi and bch clock to 100 MHz
- * bch/gpmi select PLL2 PFD2 400M
- * 100M = 400M / 4
- */
- clrbits_le32(&mxc_ccm->cscmr1,
- MXC_CCM_CSCMR1_BCH_CLK_SEL |
- MXC_CCM_CSCMR1_GPMI_CLK_SEL);
- clrsetbits_le32(&mxc_ccm->cscdr1,
- MXC_CCM_CSCDR1_BCH_PODF_MASK |
- MXC_CCM_CSCDR1_GPMI_PODF_MASK,
- (3 << MXC_CCM_CSCDR1_BCH_PODF_OFFSET) |
- (3 << MXC_CCM_CSCDR1_GPMI_PODF_OFFSET));
-
- /* enable gpmi and bch clock gating */
- setbits_le32(&mxc_ccm->CCGR4,
- MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
- MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
- MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
- MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
- MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK);
-
- /* enable apbh clock gating */
- setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK);
-}
-#endif /* CONFIG_NAND_MXS */
-
-void setenv_fdt_file(void)
-{
- if (is_mx6ul())
- env_set("fdt_file", "imx6ul-geam-kit.dtb");
-}
-
-#ifdef CONFIG_SPL_BUILD
-/* MMC board initialization is needed till adding DM support in SPL */
-#if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_DM_MMC)
-#include <mmc.h>
-#include <fsl_esdhc.h>
-
-#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \
- PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-
-static iomux_v3_cfg_t const usdhc1_pads[] = {
- IOMUX_PADS(PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD1_DATA0__USDHC1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD1_DATA1__USDHC1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD1_DATA2__USDHC1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD1_DATA3__USDHC1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-
- /* VSELECT */
- IOMUX_PADS(PAD_GPIO1_IO05__USDHC1_VSELECT | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- /* CD */
- IOMUX_PADS(PAD_UART1_RTS_B__GPIO1_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)),
- /* RST_B */
- IOMUX_PADS(PAD_GPIO1_IO09__GPIO1_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL)),
-};
-
-#define USDHC1_CD_GPIO IMX_GPIO_NR(1, 1)
-
-struct fsl_esdhc_cfg usdhc_cfg[1] = {
- {USDHC1_BASE_ADDR, 0, 4},
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
- struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
- int ret = 0;
-
- switch (cfg->esdhc_base) {
- case USDHC1_BASE_ADDR:
- ret = !gpio_get_value(USDHC1_CD_GPIO);
- break;
- }
-
- return ret;
-}
-
-int board_mmc_init(bd_t *bis)
-{
- int i, ret;
-
- /*
- * According to the board_mmc_init() the following map is done:
- * (U-boot device node) (Physical Port)
- * mmc0 USDHC1
- */
- for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
- switch (i) {
- case 0:
- SETUP_IOMUX_PADS(usdhc1_pads);
- gpio_direction_input(USDHC1_CD_GPIO);
- usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
- break;
- default:
- printf("Warning - USDHC%d controller not supporting\n",
- i + 1);
- return 0;
- }
-
- ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
- if (ret) {
- printf("Warning: failed to initialize mmc dev %d\n", i);
- return ret;
- }
- }
-
- return 0;
-}
-#endif /* CONFIG_FSL_ESDHC */
-#endif /* CONFIG_SPL_BUILD */
diff --git a/board/engicam/icorem6/Kconfig b/board/engicam/icorem6/Kconfig
deleted file mode 100644
index 4a1c9ac..0000000
--- a/board/engicam/icorem6/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_MX6Q_ICORE
-
-config SYS_BOARD
- default "icorem6"
-
-config SYS_VENDOR
- default "engicam"
-
-config SYS_CONFIG_NAME
- default "imx6-engicam"
-
-endif
diff --git a/board/engicam/icorem6/MAINTAINERS b/board/engicam/icorem6/MAINTAINERS
deleted file mode 100644
index a348bdd..0000000
--- a/board/engicam/icorem6/MAINTAINERS
+++ /dev/null
@@ -1,10 +0,0 @@
-ICOREM6QDL BOARD
-M: Jagan Teki <jagan@amarulasolutions.com>
-S: Maintained
-F: board/engicam/icorem6
-F: include/configs/imx6-engicam.h
-F: configs/imx6qdl_icore_mmc_defconfig
-F: configs/imx6qdl_icore_nand_defconfig
-F: arch/arm/dts/imx6qdl-icore.dtsi
-F: arch/arm/dts/imx6q-icore.dts
-F: arch/arm/dts/imx6dl-icore.dts
diff --git a/board/engicam/icorem6/README b/board/engicam/icorem6/README
deleted file mode 100644
index 3779e96..0000000
--- a/board/engicam/icorem6/README
+++ /dev/null
@@ -1,30 +0,0 @@
-How to use U-Boot on Engicam i.CoreM6 Solo/DualLite and Quad/Dual Starter Kit:
------------------------------------------------------------------------------
-
-$ make mrproper
-
-- Configure U-Boot for Engicam i.CoreM6 Quad/Dual/Solo/DualLite:
-$ make imx6qdl_icore_mmc_defconfig
-
-- Build U-Boot
-$ make
-
-This will generate the SPL image called SPL and the u-boot-dtb.img.
-
-- Flash the SPL image into the micro SD card:
-
-sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
-
-- Flash the u-boot-dtb.img image into the micro SD card:
-
-sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 bs=1k seek=69; sync
-
-- Jumper settings:
-
-MMC Boot: JM3 Closed
-
-- Connect the Serial cable between the Starter Kit and the PC for the console.
-(J28 is the Linux Serial console connector)
-
-- Insert the micro SD card in the board, power it up and U-Boot messages should
-come up.
diff --git a/board/engicam/icorem6_rqs/Kconfig b/board/engicam/icorem6_rqs/Kconfig
deleted file mode 100644
index 6dc3a07..0000000
--- a/board/engicam/icorem6_rqs/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_MX6Q_ICORE_RQS
-
-config SYS_BOARD
- default "icorem6_rqs"
-
-config SYS_VENDOR
- default "engicam"
-
-config SYS_CONFIG_NAME
- default "imx6-engicam"
-
-endif
diff --git a/board/engicam/icorem6_rqs/MAINTAINERS b/board/engicam/icorem6_rqs/MAINTAINERS
deleted file mode 100644
index 9a74265..0000000
--- a/board/engicam/icorem6_rqs/MAINTAINERS
+++ /dev/null
@@ -1,9 +0,0 @@
-ICOREM6QDL_RQS BOARD
-M: Jagan Teki <jagan@amarulasolutions.com>
-S: Maintained
-F: board/engicam/icorem6_rqs
-F: include/configs/imx6-engicam.h
-F: configs/imx6qdl_icore_rqs_defconfig
-F: arch/arm/dts/imx6qdl-icore-rqs.dtsi
-F: arch/arm/dts/imx6q-icore-rqs.dts
-F: arch/arm/dts/imx6dl-icore-rqs.dts
diff --git a/board/engicam/icorem6_rqs/Makefile b/board/engicam/icorem6_rqs/Makefile
deleted file mode 100644
index 2e3933c..0000000
--- a/board/engicam/icorem6_rqs/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# Copyright (C) 2016 Amarula Solutions B.V.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := icorem6_rqs.o
diff --git a/board/engicam/icorem6_rqs/icorem6_rqs.c b/board/engicam/icorem6_rqs/icorem6_rqs.c
index 0114889..a55a754 100644
--- a/board/engicam/icorem6_rqs/icorem6_rqs.c
+++ b/board/engicam/icorem6_rqs/icorem6_rqs.c
@@ -6,129 +6,20 @@
* SPDX-License-Identifier: GPL-2.0+
*/
-#include <common.h>
-#include <mmc.h>
-
-#include <asm/io.h>
-#include <asm/gpio.h>
-#include <linux/sizes.h>
-
-#include <asm/arch/clock.h>
-#include <asm/arch/crm_regs.h>
-#include <asm/arch/iomux.h>
-#include <asm/arch/mx6-pins.h>
#include <asm/arch/sys_proto.h>
-#include <asm/mach-imx/iomux-v3.h>
-
-#include "../common/board.h"
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_ENV_IS_IN_MMC
int board_mmc_get_env_dev(int devno)
{
- return devno;
+ return devno - 1;
}
#endif
-void setenv_fdt_file(void)
-{
- if (is_mx6dq())
- env_set("fdt_file", "imx6q-icore-rqs.dtb");
- else if(is_mx6dl() || is_mx6solo())
- env_set("fdt_file", "imx6dl-icore-rqs.dtb");
-}
-
#ifdef CONFIG_SPL_BUILD
#include <spl.h>
-/* MMC board initialization is needed till adding DM support in SPL */
-#if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_DM_MMC)
-#include <mmc.h>
-#include <fsl_esdhc.h>
-
-#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_HIGH | \
- PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-
-static iomux_v3_cfg_t const usdhc3_pads[] = {
- IOMUX_PADS(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-};
-
-static iomux_v3_cfg_t const usdhc4_pads[] = {
- IOMUX_PADS(PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT4__SD4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT5__SD4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT6__SD4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT7__SD4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-};
-
-struct fsl_esdhc_cfg usdhc_cfg[2] = {
- {USDHC3_BASE_ADDR, 1, 4},
- {USDHC4_BASE_ADDR, 1, 8},
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
- struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
- int ret = 0;
-
- switch (cfg->esdhc_base) {
- case USDHC3_BASE_ADDR:
- case USDHC4_BASE_ADDR:
- ret = 1;
- break;
- }
-
- return ret;
-}
-
-int board_mmc_init(bd_t *bis)
-{
- int i, ret;
-
- /*
- * According to the board_mmc_init() the following map is done:
- * (U-boot device node) (Physical Port)
- * mmc0 USDHC3
- * mmc1 USDHC4
- */
- for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
- switch (i) {
- case 0:
- SETUP_IOMUX_PADS(usdhc3_pads);
- usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
- break;
- case 1:
- SETUP_IOMUX_PADS(usdhc4_pads);
- usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
- break;
- default:
- printf("Warning - USDHC%d controller not supporting\n",
- i + 1);
- return 0;
- }
-
- ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
- if (ret) {
- printf("Warning: failed to initialize mmc dev %d\n", i);
- return ret;
- }
- }
-
- return 0;
-}
-
#ifdef CONFIG_ENV_IS_IN_MMC
void board_boot_order(u32 *spl_boot_list)
{
@@ -154,17 +45,4 @@
spl_boot_list[0] = boot_dev;
}
#endif
-#endif
-
-#ifdef CONFIG_SPL_LOAD_FIT
-int board_fit_config_name_match(const char *name)
-{
- if (is_mx6dq() && !strcmp(name, "imx6q-icore-rqs"))
- return 0;
- else if ((is_mx6dl() || is_mx6solo()) && !strcmp(name, "imx6dl-icore-rqs"))
- return 0;
- else
- return -1;
-}
-#endif
#endif /* CONFIG_SPL_BUILD */
diff --git a/board/engicam/geam6ul/Kconfig b/board/engicam/imx6q/Kconfig
similarity index 73%
rename from board/engicam/geam6ul/Kconfig
rename to board/engicam/imx6q/Kconfig
index 7f4023e..48eb60c 100644
--- a/board/engicam/geam6ul/Kconfig
+++ b/board/engicam/imx6q/Kconfig
@@ -1,7 +1,7 @@
-if TARGET_MX6UL_GEAM
+if TARGET_MX6Q_ENGICAM
config SYS_BOARD
- default "geam6ul"
+ default "imx6q"
config SYS_VENDOR
default "engicam"
diff --git a/board/engicam/imx6q/MAINTAINERS b/board/engicam/imx6q/MAINTAINERS
new file mode 100644
index 0000000..82efb46
--- /dev/null
+++ b/board/engicam/imx6q/MAINTAINERS
@@ -0,0 +1,14 @@
+MX6Q_ENGICAM BOARD
+M: Jagan Teki <jagan@amarulasolutions.com>
+S: Maintained
+F: board/engicam/imx6q
+F: include/configs/imx6-engicam.h
+F: configs/imx6qdl_icore_mmc_defconfig
+F: configs/imx6qdl_icore_nand_defconfig
+F: configs/imx6qdl_icore_rqs_defconfig
+F: arch/arm/dts/imx6qdl-icore.dtsi
+F: arch/arm/dts/imx6q-icore.dts
+F: arch/arm/dts/imx6dl-icore.dts
+F: arch/arm/dts/imx6qdl-icore-rqs.dtsi
+F: arch/arm/dts/imx6q-icore-rqs.dts
+F: arch/arm/dts/imx6dl-icore-rqs.dts
diff --git a/board/engicam/icorem6/Makefile b/board/engicam/imx6q/Makefile
similarity index 80%
rename from board/engicam/icorem6/Makefile
rename to board/engicam/imx6q/Makefile
index 9ec9ecd..ef2fb6a 100644
--- a/board/engicam/icorem6/Makefile
+++ b/board/engicam/imx6q/Makefile
@@ -3,4 +3,4 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y := icorem6.o
+obj-y := imx6q.o
diff --git a/board/engicam/icorem6_rqs/README b/board/engicam/imx6q/README
similarity index 71%
copy from board/engicam/icorem6_rqs/README
copy to board/engicam/imx6q/README
index 97e978c..3f3478c 100644
--- a/board/engicam/icorem6_rqs/README
+++ b/board/engicam/imx6q/README
@@ -1,9 +1,12 @@
-How to use U-Boot on Engicam i.CoreM6 RQS Solo/DualLite and Quad/Dual Starter Kit:
-----------------------------------------------------------------------------------
+Hsow to use U-Boot on Engicam i.CoreM6 (RQS) Solo/DualLite/Quad/Dual Starter Kit:
+--------------------------------------------------------------------------------
$ make mrproper
-- Configure U-Boot for Engicam i.CoreM6 RQS Quad/Dual/Solo/DualLite:
+- Configure U-Boot for Engicam i.CoreM6 Quad/Duali/Solo/DualLite:
+$ make imx6qdl_icore_mmc_defconfig
+
+- Configure U-Boot for Engicam i.CoreM6 RQS Quad/Duali/Solo/DualLite:
$ make imx6qdl_icore_rqs_defconfig
- Build U-Boot
diff --git a/board/engicam/icorem6/icorem6.c b/board/engicam/imx6q/imx6q.c
similarity index 71%
rename from board/engicam/icorem6/icorem6.c
rename to board/engicam/imx6q/imx6q.c
index 3d4f713..fe37088 100644
--- a/board/engicam/icorem6/icorem6.c
+++ b/board/engicam/imx6q/imx6q.c
@@ -7,7 +7,6 @@
*/
#include <common.h>
-#include <mmc.h>
#include <asm/io.h>
#include <asm/gpio.h>
@@ -26,13 +25,12 @@
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_NAND_MXS
-
#define GPMI_PAD_CTRL0 (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
#define GPMI_PAD_CTRL1 (PAD_CTL_DSE_40ohm | PAD_CTL_SPEED_MED | \
PAD_CTL_SRE_FAST)
#define GPMI_PAD_CTRL2 (GPMI_PAD_CTRL0 | GPMI_PAD_CTRL1)
-iomux_v3_cfg_t gpmi_pads[] = {
+static iomux_v3_cfg_t gpmi_pads[] = {
IOMUX_PADS(PAD_NANDF_CLE__NAND_CLE | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
IOMUX_PADS(PAD_NANDF_ALE__NAND_ALE | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
IOMUX_PADS(PAD_NANDF_WP_B__NAND_WP_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
@@ -192,96 +190,10 @@
}
#endif /* CONFIG_VIDEO_IPUV3 */
-void setenv_fdt_file(void)
+#ifdef CONFIG_ENV_IS_IN_MMC
+int board_mmc_get_env_dev(int devno)
{
- if (is_mx6dq())
- env_set("fdt_file", "imx6q-icore.dtb");
- else if(is_mx6dl() || is_mx6solo())
- env_set("fdt_file", "imx6dl-icore.dtb");
-}
-
-#ifdef CONFIG_SPL_BUILD
-/* MMC board initialization is needed till adding DM support in SPL */
-#if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_DM_MMC)
-#include <mmc.h>
-#include <fsl_esdhc.h>
-
-#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \
- PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-
-static iomux_v3_cfg_t const usdhc1_pads[] = {
- IOMUX_PADS(PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD1_DAT0__SD1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD1_DAT1__SD1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD1_DAT2__SD1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD1_DAT3__SD1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_GPIO_1__GPIO1_IO01 | MUX_PAD_CTRL(NO_PAD_CTRL)),/* CD */
-};
-
-#define USDHC1_CD_GPIO IMX_GPIO_NR(1, 1)
-
-struct fsl_esdhc_cfg usdhc_cfg[1] = {
- {USDHC1_BASE_ADDR, 0, 4},
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
- struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
- int ret = 0;
-
- switch (cfg->esdhc_base) {
- case USDHC1_BASE_ADDR:
- ret = !gpio_get_value(USDHC1_CD_GPIO);
- break;
- }
-
- return ret;
-}
-
-int board_mmc_init(bd_t *bis)
-{
- int i, ret;
-
- /*
- * According to the board_mmc_init() the following map is done:
- * (U-boot device node) (Physical Port)
- * mmc0 USDHC1
- */
- for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
- switch (i) {
- case 0:
- SETUP_IOMUX_PADS(usdhc1_pads);
- gpio_direction_input(USDHC1_CD_GPIO);
- usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
- break;
- default:
- printf("Warning - USDHC%d controller not supporting\n",
- i + 1);
- return 0;
- }
-
- ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
- if (ret) {
- printf("Warning: failed to initialize mmc dev %d\n", i);
- return ret;
- }
- }
-
- return 0;
+ /* i.CoreM6 RQS has USDHC3 for SD and USDHC4 for eMMC */
+ return (devno == 0) ? 0: (devno - 1);
}
#endif
-
-#ifdef CONFIG_SPL_LOAD_FIT
-int board_fit_config_name_match(const char *name)
-{
- if (is_mx6dq() && !strcmp(name, "imx6q-icore"))
- return 0;
- else if ((is_mx6dl() || is_mx6solo()) && !strcmp(name, "imx6dl-icore"))
- return 0;
- else
- return -1;
-}
-#endif
-#endif /* CONFIG_SPL_BUILD */
diff --git a/board/engicam/geam6ul/Kconfig b/board/engicam/imx6ul/Kconfig
similarity index 72%
copy from board/engicam/geam6ul/Kconfig
copy to board/engicam/imx6ul/Kconfig
index 7f4023e..e91dd15 100644
--- a/board/engicam/geam6ul/Kconfig
+++ b/board/engicam/imx6ul/Kconfig
@@ -1,7 +1,7 @@
-if TARGET_MX6UL_GEAM
+if TARGET_MX6UL_ENGICAM
config SYS_BOARD
- default "geam6ul"
+ default "imx6ul"
config SYS_VENDOR
default "engicam"
diff --git a/board/engicam/isiotmx6ul/MAINTAINERS b/board/engicam/imx6ul/MAINTAINERS
similarity index 69%
rename from board/engicam/isiotmx6ul/MAINTAINERS
rename to board/engicam/imx6ul/MAINTAINERS
index 9b66c8d..37f84f8 100644
--- a/board/engicam/isiotmx6ul/MAINTAINERS
+++ b/board/engicam/imx6ul/MAINTAINERS
@@ -1,11 +1,14 @@
-ISIOTMX6UL BOARD
+MX6UL_ENGICAM BOARD
M: Jagan Teki <jagan@amarulasolutions.com>
S: Maintained
-F: board/engicam/isiotmx6ul
+F: board/engicam/imx6ul
F: include/configs/imx6-engicam.h
-F: configs/imx6ul_isiot_mmc_defconfig
+F: configs/imx6ul_geam_mmc_defconfig
+F: configs/imx6ul_geam_nand_defconfig
F: configs/imx6ul_isiot_emmc_defconfig
+F: configs/imx6ul_isiot_mmc_defconfig
F: configs/imx6ul_isiot_nand_defconfig
+F: arch/arm/dts/imx6ul-geam-kit.dts
F: arch/arm/dts/imx6ul-isiot.dtsi
F: arch/arm/dts/imx6ul-isiot-mmc.dts
F: arch/arm/dts/imx6ul-isiot-emmc.dts
diff --git a/board/engicam/icorem6/Makefile b/board/engicam/imx6ul/Makefile
similarity index 80%
copy from board/engicam/icorem6/Makefile
copy to board/engicam/imx6ul/Makefile
index 9ec9ecd..c78c7e4 100644
--- a/board/engicam/icorem6/Makefile
+++ b/board/engicam/imx6ul/Makefile
@@ -3,4 +3,4 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y := icorem6.o
+obj-y := imx6ul.o
diff --git a/board/engicam/icorem6_rqs/README b/board/engicam/imx6ul/README
similarity index 74%
rename from board/engicam/icorem6_rqs/README
rename to board/engicam/imx6ul/README
index 97e978c..1e85f61 100644
--- a/board/engicam/icorem6_rqs/README
+++ b/board/engicam/imx6ul/README
@@ -1,10 +1,13 @@
-How to use U-Boot on Engicam i.CoreM6 RQS Solo/DualLite and Quad/Dual Starter Kit:
-----------------------------------------------------------------------------------
+Hsow to use U-Boot on Engicam GEAM6UL and Is.IoT MX6UL Starter Kit:
+-------------------------------------------------------------------
$ make mrproper
-- Configure U-Boot for Engicam i.CoreM6 RQS Quad/Dual/Solo/DualLite:
-$ make imx6qdl_icore_rqs_defconfig
+- Configure U-Boot for Engicam GEAM6UL:
+$ make imx6ul_geam_mmc_defconfig
+
+- Configure U-Boot for Engicam Is.IoT MX6UL:
+$ make imx6ul_isiot_mmc_defconfig
- Build U-Boot
$ make
diff --git a/board/engicam/imx6ul/imx6ul.c b/board/engicam/imx6ul/imx6ul.c
new file mode 100644
index 0000000..a903a36
--- /dev/null
+++ b/board/engicam/imx6ul/imx6ul.c
@@ -0,0 +1,99 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <mmc.h>
+
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <linux/sizes.h>
+
+#include <asm/arch/clock.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/mach-imx/iomux-v3.h>
+
+#include "../common/board.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_NAND_MXS
+
+#define GPMI_PAD_CTRL0 (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
+#define GPMI_PAD_CTRL1 (PAD_CTL_DSE_40ohm | PAD_CTL_SPEED_MED | \
+ PAD_CTL_SRE_FAST)
+#define GPMI_PAD_CTRL2 (GPMI_PAD_CTRL0 | GPMI_PAD_CTRL1)
+
+static iomux_v3_cfg_t const nand_pads[] = {
+ IOMUX_PADS(PAD_NAND_DATA00__RAWNAND_DATA00 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_DATA01__RAWNAND_DATA01 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_DATA02__RAWNAND_DATA02 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_DATA03__RAWNAND_DATA03 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_DATA04__RAWNAND_DATA04 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_DATA05__RAWNAND_DATA05 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_DATA06__RAWNAND_DATA06 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_DATA07__RAWNAND_DATA07 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_CLE__RAWNAND_CLE | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_ALE__RAWNAND_ALE | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_CE0_B__RAWNAND_CE0_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_RE_B__RAWNAND_RE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_WE_B__RAWNAND_WE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_WP_B__RAWNAND_WP_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+ IOMUX_PADS(PAD_NAND_READY_B__RAWNAND_READY_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
+};
+
+void setup_gpmi_nand(void)
+{
+ struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+ /* config gpmi nand iomux */
+ SETUP_IOMUX_PADS(nand_pads);
+
+ clrbits_le32(&mxc_ccm->CCGR4,
+ MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
+ MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK);
+
+ /*
+ * config gpmi and bch clock to 100 MHz
+ * bch/gpmi select PLL2 PFD2 400M
+ * 100M = 400M / 4
+ */
+ clrbits_le32(&mxc_ccm->cscmr1,
+ MXC_CCM_CSCMR1_BCH_CLK_SEL |
+ MXC_CCM_CSCMR1_GPMI_CLK_SEL);
+ clrsetbits_le32(&mxc_ccm->cscdr1,
+ MXC_CCM_CSCDR1_BCH_PODF_MASK |
+ MXC_CCM_CSCDR1_GPMI_PODF_MASK,
+ (3 << MXC_CCM_CSCDR1_BCH_PODF_OFFSET) |
+ (3 << MXC_CCM_CSCDR1_GPMI_PODF_OFFSET));
+
+ /* enable gpmi and bch clock gating */
+ setbits_le32(&mxc_ccm->CCGR4,
+ MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
+ MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK);
+
+ /* enable apbh clock gating */
+ setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK);
+}
+#endif /* CONFIG_NAND_MXS */
+
+#ifdef CONFIG_ENV_IS_IN_MMC
+int board_mmc_get_env_dev(int devno)
+{
+ /* dev 0 for SD/eSD, dev 1 for MMC/eMMC */
+ return (devno == 0) ? 0 : 1;
+}
+#endif
diff --git a/board/engicam/isiotmx6ul/Kconfig b/board/engicam/isiotmx6ul/Kconfig
deleted file mode 100644
index 10c2c50..0000000
--- a/board/engicam/isiotmx6ul/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_MX6UL_ISIOT
-
-config SYS_BOARD
- default "isiotmx6ul"
-
-config SYS_VENDOR
- default "engicam"
-
-config SYS_CONFIG_NAME
- default "imx6-engicam"
-
-endif
diff --git a/board/engicam/isiotmx6ul/Makefile b/board/engicam/isiotmx6ul/Makefile
deleted file mode 100644
index f4f8c78..0000000
--- a/board/engicam/isiotmx6ul/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# Copyright (C) 2016 Amarula Solutions B.V.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := isiotmx6ul.o
diff --git a/board/engicam/isiotmx6ul/README b/board/engicam/isiotmx6ul/README
deleted file mode 100644
index 1d177ac..0000000
--- a/board/engicam/isiotmx6ul/README
+++ /dev/null
@@ -1,28 +0,0 @@
-How to use U-Boot on Engicam Is.IoT MX6UL Starter Kit:
------------------------------------------------------
-
-- Configure U-Boot for Engicam Is.IoT MX6UL
-
-$ make mrproper
-$ make imx6ul_isiot_mmc_defconfig
-$ make
-
-This will generate the SPL image called SPL and the u-boot-dtb.img.
-
-- Flash the SPL image into the micro SD card:
-
-sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
-
-- Flash the u-boot-dtb.img image into the micro SD card:
-
-sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 bs=1k seek=69; sync
-
-- Jumper settings:
-
-MMC Boot: JM3 Closed
-
-- Connect the Serial cable between the Starter Kit and the PC for the console.
-(J28 is the Linux Serial console connector)
-
-- Insert the micro SD card in the board, power it up and U-Boot messages should
-come up.
diff --git a/board/engicam/isiotmx6ul/isiotmx6ul.c b/board/engicam/isiotmx6ul/isiotmx6ul.c
deleted file mode 100644
index fbf1724..0000000
--- a/board/engicam/isiotmx6ul/isiotmx6ul.c
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * Copyright (C) 2016 Amarula Solutions B.V.
- * Copyright (C) 2016 Engicam S.r.l.
- * Author: Jagan Teki <jagan@amarulasolutions.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mmc.h>
-
-#include <asm/io.h>
-#include <asm/gpio.h>
-#include <linux/sizes.h>
-
-#include <asm/arch/clock.h>
-#include <asm/arch/crm_regs.h>
-#include <asm/arch/iomux.h>
-#include <asm/arch/mx6-pins.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/mach-imx/iomux-v3.h>
-
-#include "../common/board.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_NAND_MXS
-
-#define GPMI_PAD_CTRL0 (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
-#define GPMI_PAD_CTRL1 (PAD_CTL_DSE_40ohm | PAD_CTL_SPEED_MED | \
- PAD_CTL_SRE_FAST)
-#define GPMI_PAD_CTRL2 (GPMI_PAD_CTRL0 | GPMI_PAD_CTRL1)
-
-static iomux_v3_cfg_t const nand_pads[] = {
- IOMUX_PADS(PAD_NAND_DATA00__RAWNAND_DATA00 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_DATA01__RAWNAND_DATA01 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_DATA02__RAWNAND_DATA02 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_DATA03__RAWNAND_DATA03 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_DATA04__RAWNAND_DATA04 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_DATA05__RAWNAND_DATA05 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_DATA06__RAWNAND_DATA06 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_DATA07__RAWNAND_DATA07 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_CLE__RAWNAND_CLE | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_ALE__RAWNAND_ALE | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_CE0_B__RAWNAND_CE0_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_RE_B__RAWNAND_RE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_WE_B__RAWNAND_WE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_WP_B__RAWNAND_WP_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_READY_B__RAWNAND_READY_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
-};
-
-void setup_gpmi_nand(void)
-{
- struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
-
- /* config gpmi nand iomux */
- SETUP_IOMUX_PADS(nand_pads);
-
- clrbits_le32(&mxc_ccm->CCGR4,
- MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
- MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
- MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
- MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
- MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK);
-
- /*
- * config gpmi and bch clock to 100 MHz
- * bch/gpmi select PLL2 PFD2 400M
- * 100M = 400M / 4
- */
- clrbits_le32(&mxc_ccm->cscmr1,
- MXC_CCM_CSCMR1_BCH_CLK_SEL |
- MXC_CCM_CSCMR1_GPMI_CLK_SEL);
- clrsetbits_le32(&mxc_ccm->cscdr1,
- MXC_CCM_CSCDR1_BCH_PODF_MASK |
- MXC_CCM_CSCDR1_GPMI_PODF_MASK,
- (3 << MXC_CCM_CSCDR1_BCH_PODF_OFFSET) |
- (3 << MXC_CCM_CSCDR1_GPMI_PODF_OFFSET));
-
- /* enable gpmi and bch clock gating */
- setbits_le32(&mxc_ccm->CCGR4,
- MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
- MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
- MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
- MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
- MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK);
-
- /* enable apbh clock gating */
- setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK);
-}
-#endif /* CONFIG_NAND_MXS */
-
-#ifdef CONFIG_ENV_IS_IN_MMC
-int board_mmc_get_env_dev(int devno)
-{
- /* dev 0 for SD/eSD, dev 1 for MMC/eMMC */
- return (devno == 0) ? 0 : 1;
-}
-#endif
-
-void setenv_fdt_file(void)
-{
- if (is_mx6ul()) {
-#ifdef CONFIG_ENV_IS_IN_MMC
- env_set("fdt_file", "imx6ul-isiot-emmc.dtb");
-#else
- env_set("fdt_file", "imx6ul-isiot-nand.dtb");
-#endif
- }
-}
-
-#ifdef CONFIG_SPL_BUILD
-#include <spl.h>
-
-/* MMC board initialization is needed till adding DM support in SPL */
-#if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_DM_MMC)
-#include <mmc.h>
-#include <fsl_esdhc.h>
-
-#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \
- PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-
-static iomux_v3_cfg_t const usdhc1_pads[] = {
- IOMUX_PADS(PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD1_DATA0__USDHC1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD1_DATA1__USDHC1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD1_DATA2__USDHC1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD1_DATA3__USDHC1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-
- /* VSELECT */
- IOMUX_PADS(PAD_GPIO1_IO05__USDHC1_VSELECT | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- /* CD */
- IOMUX_PADS(PAD_UART1_RTS_B__GPIO1_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)),
- /* RST_B */
- IOMUX_PADS(PAD_GPIO1_IO09__GPIO1_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL)),
-};
-
-static iomux_v3_cfg_t const usdhc2_pads[] = {
- IOMUX_PADS(PAD_NAND_ALE__USDHC2_RESET_B | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_NAND_RE_B__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_NAND_WE_B__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_NAND_DATA00__USDHC2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_NAND_DATA01__USDHC2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_NAND_DATA02__USDHC2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_NAND_DATA03__USDHC2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_NAND_DATA04__USDHC2_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_NAND_DATA05__USDHC2_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-};
-
-#define USDHC1_CD_GPIO IMX_GPIO_NR(1, 19)
-#define USDHC2_CD_GPIO IMX_GPIO_NR(4, 5)
-
-struct fsl_esdhc_cfg usdhc_cfg[2] = {
- {USDHC1_BASE_ADDR, 0, 4},
- {USDHC2_BASE_ADDR, 0, 8},
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
- struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
- int ret = 0;
-
- switch (cfg->esdhc_base) {
- case USDHC1_BASE_ADDR:
- ret = !gpio_get_value(USDHC1_CD_GPIO);
- break;
- case USDHC2_BASE_ADDR:
- ret = !gpio_get_value(USDHC2_CD_GPIO);
- break;
- }
-
- return ret;
-}
-
-int board_mmc_init(bd_t *bis)
-{
- int i, ret;
-
- /*
- * According to the board_mmc_init() the following map is done:
- * (U-boot device node) (Physical Port)
- * mmc0 USDHC1
- * mmc1 USDHC2
- */
- for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
- switch (i) {
- case 0:
- SETUP_IOMUX_PADS(usdhc1_pads);
- gpio_direction_input(USDHC1_CD_GPIO);
- usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
- break;
- case 1:
- SETUP_IOMUX_PADS(usdhc2_pads);
- gpio_direction_input(USDHC2_CD_GPIO);
- usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
- break;
- default:
- printf("Warning - USDHC%d controller not supporting\n",
- i + 1);
- return 0;
- }
-
- ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
- if (ret) {
- printf("Warning: failed to initialize mmc dev %d\n", i);
- return ret;
- }
- }
-
- return 0;
-}
-
-#ifdef CONFIG_ENV_IS_IN_MMC
-void board_boot_order(u32 *spl_boot_list)
-{
- u32 bmode = imx6_src_get_boot_mode();
- u8 boot_dev = BOOT_DEVICE_MMC1;
-
- switch ((bmode & IMX6_BMODE_MASK) >> IMX6_BMODE_SHIFT) {
- case IMX6_BMODE_SD:
- case IMX6_BMODE_ESD:
- /* SD/eSD - BOOT_DEVICE_MMC1 */
- break;
- case IMX6_BMODE_MMC:
- case IMX6_BMODE_EMMC:
- /* MMC/eMMC */
- boot_dev = BOOT_DEVICE_MMC2;
- break;
- default:
- /* Default - BOOT_DEVICE_MMC1 */
- printf("Wrong board boot order\n");
- break;
- }
-
- spl_boot_list[0] = boot_dev;
-}
-#endif
-#endif /* CONFIG_FSL_ESDHC */
-#endif /* CONFIG_SPL_BUILD */
diff --git a/board/ge/bx50v3/Makefile b/board/ge/bx50v3/Makefile
index 2fff27b..bcd149f 100644
--- a/board/ge/bx50v3/Makefile
+++ b/board/ge/bx50v3/Makefile
@@ -5,4 +5,4 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y := bx50v3.o vpd_reader.o
+obj-y := bx50v3.o
diff --git a/board/ge/bx50v3/bx50v3.c b/board/ge/bx50v3/bx50v3.c
index 2e8f394..37de990 100644
--- a/board/ge/bx50v3/bx50v3.c
+++ b/board/ge/bx50v3/bx50v3.c
@@ -28,7 +28,7 @@
#include <input.h>
#include <pwm.h>
#include <stdlib.h>
-#include "vpd_reader.h"
+#include "../common/vpd_reader.h"
DECLARE_GLOBAL_DATA_PTR;
#ifndef CONFIG_SYS_I2C_EEPROM_ADDR
diff --git a/board/ge/bx50v3/vpd_reader.c b/board/ge/bx50v3/vpd_reader.c
deleted file mode 100644
index 98da893..0000000
--- a/board/ge/bx50v3/vpd_reader.c
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- * Copyright 2016 General Electric Company
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include "vpd_reader.h"
-
-#include <linux/bch.h>
-#include <stdlib.h>
-
-
-/* BCH configuration */
-
-const struct {
- int header_ecc_capability_bits;
- int data_ecc_capability_bits;
- unsigned int prim_poly;
- struct {
- int min;
- int max;
- } galois_field_order;
-} bch_configuration = {
- .header_ecc_capability_bits = 4,
- .data_ecc_capability_bits = 16,
- .prim_poly = 0,
- .galois_field_order = {
- .min = 5,
- .max = 15,
- },
-};
-
-static int calculate_galois_field_order(size_t source_length)
-{
- int gfo = bch_configuration.galois_field_order.min;
-
- for (; gfo < bch_configuration.galois_field_order.max &&
- ((((1 << gfo) - 1) - ((int)source_length * 8)) < 0);
- gfo++) {
- }
-
- if (gfo == bch_configuration.galois_field_order.max) {
- return -1;
- }
-
- return gfo + 1;
-}
-
-static int verify_bch(int ecc_bits, unsigned int prim_poly,
- uint8_t * data, size_t data_length,
- const uint8_t * ecc, size_t ecc_length)
-{
- int gfo = calculate_galois_field_order(data_length);
- if (gfo < 0) {
- return -1;
- }
-
- struct bch_control * bch = init_bch(gfo, ecc_bits, prim_poly);
- if (!bch) {
- return -1;
- }
-
- if (bch->ecc_bytes != ecc_length) {
- free_bch(bch);
- return -1;
- }
-
- unsigned * errloc = (unsigned *)calloc(data_length, sizeof(unsigned));
- int errors = decode_bch(
- bch, data, data_length, ecc, NULL, NULL, errloc);
- free_bch(bch);
- if (errors < 0) {
- free(errloc);
- return -1;
- }
-
- if (errors > 0) {
- for (int n = 0; n < errors; n++) {
- if (errloc[n] >= 8 * data_length) {
- /* n-th error located in ecc (no need for data correction) */
- } else {
- /* n-th error located in data */
- data[errloc[n] / 8] ^= 1 << (errloc[n] % 8);
- }
- }
- }
-
- free(errloc);
- return 0;
-}
-
-
-static const int ID = 0;
-static const int LEN = 1;
-static const int VER = 2;
-static const int TYP = 3;
-static const int BLOCK_SIZE = 4;
-
-static const uint8_t HEADER_BLOCK_ID = 0x00;
-static const uint8_t HEADER_BLOCK_LEN = 18;
-static const uint32_t HEADER_BLOCK_MAGIC = 0xca53ca53;
-static const size_t HEADER_BLOCK_VERIFY_LEN = 14;
-static const size_t HEADER_BLOCK_ECC_OFF = 14;
-static const size_t HEADER_BLOCK_ECC_LEN = 4;
-
-static const uint8_t ECC_BLOCK_ID = 0xFF;
-
-int vpd_reader(
- size_t size,
- uint8_t * data,
- void * userdata,
- int (*fn)(
- void * userdata,
- uint8_t id,
- uint8_t version,
- uint8_t type,
- size_t size,
- uint8_t const * data))
-{
- if ( size < HEADER_BLOCK_LEN
- || data == NULL
- || fn == NULL) {
- return -EINVAL;
- }
-
- /*
- * +--------------------+--------------------+--//--+--------------------+
- * | header block | data block | ... | ecc block |
- * +--------------------+--------------------+--//--+--------------------+
- * : : :
- * +------+-------+-----+ +------+-------------+
- * | id | magic | ecc | | ... | ecc |
- * | len | off | | +------+-------------+
- * | ver | size | | :
- * | type | | | :
- * +------+-------+-----+ :
- * : : : :
- * <----- [1] ----> <----------- [2] ----------->
- *
- * Repair (if necessary) the contents of header block [1] by using a
- * 4 byte ECC located at the end of the header block. A successful
- * return value means that we can trust the header.
- */
- int ret = verify_bch(
- bch_configuration.header_ecc_capability_bits,
- bch_configuration.prim_poly,
- data,
- HEADER_BLOCK_VERIFY_LEN,
- &data[HEADER_BLOCK_ECC_OFF],
- HEADER_BLOCK_ECC_LEN);
- if (ret < 0) {
- return ret;
- }
-
- /* Validate header block { id, length, version, type }. */
- if ( data[ID] != HEADER_BLOCK_ID
- || data[LEN] != HEADER_BLOCK_LEN
- || data[VER] != 0
- || data[TYP] != 0
- || ntohl(*(uint32_t *)(&data[4])) != HEADER_BLOCK_MAGIC) {
- return -EINVAL;
- }
-
- uint32_t offset = ntohl(*(uint32_t *)(&data[8]));
- uint16_t size_bits = ntohs(*(uint16_t *)(&data[12]));
-
- /* Check that ECC header fits. */
- if (offset + 3 >= size) {
- return -EINVAL;
- }
-
- /* Validate ECC block. */
- uint8_t * ecc = &data[offset];
- if ( ecc[ID] != ECC_BLOCK_ID
- || ecc[LEN] < BLOCK_SIZE
- || ecc[LEN] + offset > size
- || ecc[LEN] - BLOCK_SIZE != size_bits / 8
- || ecc[VER] != 1
- || ecc[TYP] != 1) {
- return -EINVAL;
- }
-
- /*
- * Use the header block to locate the ECC block and verify the data
- * blocks [2] against the ecc block ECC.
- */
- ret = verify_bch(
- bch_configuration.data_ecc_capability_bits,
- bch_configuration.prim_poly,
- &data[data[LEN]],
- offset - data[LEN],
- &data[offset + BLOCK_SIZE],
- ecc[LEN] - BLOCK_SIZE);
- if (ret < 0) {
- return ret;
- }
-
- /* Stop after ECC. Ignore possible zero padding. */
- size = offset;
-
- for (;;) {
- /* Move to next block. */
- size -= data[LEN];
- data += data[LEN];
-
- if (size == 0) {
- /* Finished iterating through blocks. */
- return 0;
- }
-
- if ( size < BLOCK_SIZE
- || data[LEN] < BLOCK_SIZE) {
- /* Not enough data for a header, or short header. */
- return -EINVAL;
- }
-
- ret = fn(
- userdata,
- data[ID],
- data[VER],
- data[TYP],
- data[LEN] - BLOCK_SIZE,
- &data[BLOCK_SIZE]);
- if (ret) {
- return ret;
- }
- }
-}
diff --git a/board/ge/bx50v3/vpd_reader.h b/board/ge/bx50v3/vpd_reader.h
deleted file mode 100644
index efa172a..0000000
--- a/board/ge/bx50v3/vpd_reader.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright 2016 General Electric Company
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include "common.h"
-
-/*
- * Read VPD from given data, verify content, and call callback
- * for each vital product data block.
- *
- * Returns Non-zero on error. Negative numbers encode errno.
- */
-int vpd_reader(
- size_t size,
- uint8_t * data,
- void * userdata,
- int (*fn)(
- void * userdata,
- uint8_t id,
- uint8_t version,
- uint8_t type,
- size_t size,
- uint8_t const * data));
diff --git a/board/ge/common/Makefile b/board/ge/common/Makefile
new file mode 100644
index 0000000..93e6c01
--- /dev/null
+++ b/board/ge/common/Makefile
@@ -0,0 +1,7 @@
+#
+# Copyright 2017 General Electric Company
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := vpd_reader.o
diff --git a/board/ge/common/vpd_reader.c b/board/ge/common/vpd_reader.c
new file mode 100644
index 0000000..7367427
--- /dev/null
+++ b/board/ge/common/vpd_reader.c
@@ -0,0 +1,197 @@
+/*
+ * Copyright 2016 General Electric Company
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include "vpd_reader.h"
+
+#include <linux/bch.h>
+#include <stdlib.h>
+
+/* BCH configuration */
+
+const struct {
+ int header_ecc_capability_bits;
+ int data_ecc_capability_bits;
+ unsigned int prim_poly;
+ struct {
+ int min;
+ int max;
+ } galois_field_order;
+} bch_configuration = {
+ .header_ecc_capability_bits = 4,
+ .data_ecc_capability_bits = 16,
+ .prim_poly = 0,
+ .galois_field_order = {
+ .min = 5,
+ .max = 15,
+ },
+};
+
+static int calculate_galois_field_order(size_t source_length)
+{
+ int gfo = bch_configuration.galois_field_order.min;
+
+ for (; gfo < bch_configuration.galois_field_order.max &&
+ ((((1 << gfo) - 1) - ((int)source_length * 8)) < 0);
+ gfo++) {
+ }
+
+ if (gfo == bch_configuration.galois_field_order.max)
+ return -1;
+
+ return gfo + 1;
+}
+
+static int verify_bch(int ecc_bits, unsigned int prim_poly, u8 *data,
+ size_t data_length, const u8 *ecc, size_t ecc_length)
+{
+ int gfo = calculate_galois_field_order(data_length);
+
+ if (gfo < 0)
+ return -1;
+
+ struct bch_control *bch = init_bch(gfo, ecc_bits, prim_poly);
+
+ if (!bch)
+ return -1;
+
+ if (bch->ecc_bytes != ecc_length) {
+ free_bch(bch);
+ return -1;
+ }
+
+ unsigned int *errloc = (unsigned int *)calloc(data_length,
+ sizeof(unsigned int));
+ int errors = decode_bch(bch, data, data_length, ecc, NULL, NULL,
+ errloc);
+
+ free_bch(bch);
+ if (errors < 0) {
+ free(errloc);
+ return -1;
+ }
+
+ if (errors > 0) {
+ for (int n = 0; n < errors; n++) {
+ if (errloc[n] >= 8 * data_length) {
+ /*
+ * n-th error located in ecc (no need for data
+ * correction)
+ */
+ } else {
+ /* n-th error located in data */
+ data[errloc[n] / 8] ^= 1 << (errloc[n] % 8);
+ }
+ }
+ }
+
+ free(errloc);
+ return 0;
+}
+
+static const int ID;
+static const int LEN = 1;
+static const int VER = 2;
+static const int TYP = 3;
+static const int BLOCK_SIZE = 4;
+
+static const u8 HEADER_BLOCK_ID;
+static const u8 HEADER_BLOCK_LEN = 18;
+static const u32 HEADER_BLOCK_MAGIC = 0xca53ca53;
+static const size_t HEADER_BLOCK_VERIFY_LEN = 14;
+static const size_t HEADER_BLOCK_ECC_OFF = 14;
+static const size_t HEADER_BLOCK_ECC_LEN = 4;
+
+static const u8 ECC_BLOCK_ID = 0xFF;
+
+int vpd_reader(size_t size, u8 *data, void *userdata,
+ int (*fn)(void *userdata, u8 id, u8 version, u8 type,
+ size_t size, u8 const *data))
+{
+ if (size < HEADER_BLOCK_LEN || !data || !fn)
+ return -EINVAL;
+
+ /*
+ * +--------------------+----------------+--//--+--------------------+
+ * | header block | data block | ... | ecc block |
+ * +--------------------+----------------+--//--+--------------------+
+ * : : :
+ * +------+-------+-----+ +------+-------------+
+ * | id | magic | ecc | | ... | ecc |
+ * | len | off | | +------+-------------+
+ * | ver | size | | :
+ * | type | | | :
+ * +------+-------+-----+ :
+ * : : : :
+ * <----- [1] ----> <--------- [2] --------->
+ *
+ * Repair (if necessary) the contents of header block [1] by using a
+ * 4 byte ECC located at the end of the header block. A successful
+ * return value means that we can trust the header.
+ */
+ int ret = verify_bch(bch_configuration.header_ecc_capability_bits,
+ bch_configuration.prim_poly, data,
+ HEADER_BLOCK_VERIFY_LEN,
+ &data[HEADER_BLOCK_ECC_OFF], HEADER_BLOCK_ECC_LEN);
+ if (ret < 0)
+ return ret;
+
+ /* Validate header block { id, length, version, type }. */
+ if (data[ID] != HEADER_BLOCK_ID || data[LEN] != HEADER_BLOCK_LEN ||
+ data[VER] != 0 || data[TYP] != 0 ||
+ ntohl(*(u32 *)(&data[4])) != HEADER_BLOCK_MAGIC)
+ return -EINVAL;
+
+ u32 offset = ntohl(*(u32 *)(&data[8]));
+ u16 size_bits = ntohs(*(u16 *)(&data[12]));
+
+ /* Check that ECC header fits. */
+ if (offset + 3 >= size)
+ return -EINVAL;
+
+ /* Validate ECC block. */
+ u8 *ecc = &data[offset];
+
+ if (ecc[ID] != ECC_BLOCK_ID || ecc[LEN] < BLOCK_SIZE ||
+ ecc[LEN] + offset > size ||
+ ecc[LEN] - BLOCK_SIZE != size_bits / 8 || ecc[VER] != 1 ||
+ ecc[TYP] != 1)
+ return -EINVAL;
+
+ /*
+ * Use the header block to locate the ECC block and verify the data
+ * blocks [2] against the ecc block ECC.
+ */
+ ret = verify_bch(bch_configuration.data_ecc_capability_bits,
+ bch_configuration.prim_poly, &data[data[LEN]],
+ offset - data[LEN], &data[offset + BLOCK_SIZE],
+ ecc[LEN] - BLOCK_SIZE);
+ if (ret < 0)
+ return ret;
+
+ /* Stop after ECC. Ignore possible zero padding. */
+ size = offset;
+
+ for (;;) {
+ /* Move to next block. */
+ size -= data[LEN];
+ data += data[LEN];
+
+ if (size == 0) {
+ /* Finished iterating through blocks. */
+ return 0;
+ }
+
+ if (size < BLOCK_SIZE || data[LEN] < BLOCK_SIZE) {
+ /* Not enough data for a header, or short header. */
+ return -EINVAL;
+ }
+
+ ret = fn(userdata, data[ID], data[VER], data[TYP],
+ data[LEN] - BLOCK_SIZE, &data[BLOCK_SIZE]);
+ if (ret)
+ return ret;
+ }
+}
diff --git a/board/ge/common/vpd_reader.h b/board/ge/common/vpd_reader.h
new file mode 100644
index 0000000..4abba8f
--- /dev/null
+++ b/board/ge/common/vpd_reader.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright 2016 General Electric Company
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include "common.h"
+
+/*
+ * Read VPD from given data, verify content, and call callback
+ * for each vital product data block.
+ *
+ * Returns Non-zero on error. Negative numbers encode errno.
+ */
+int vpd_reader(size_t size, u8 *data, void *userdata,
+ int (*fn)(void *userdata, u8 id, u8 version, u8 type,
+ size_t size, u8 const *data));
diff --git a/board/ge/mx53ppd/Kconfig b/board/ge/mx53ppd/Kconfig
new file mode 100644
index 0000000..781c1cf
--- /dev/null
+++ b/board/ge/mx53ppd/Kconfig
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+if TARGET_MX53PPD
+
+config SYS_BOARD
+ default "mx53ppd"
+
+config SYS_VENDOR
+ default "ge"
+
+config SYS_SOC
+ default "mx5"
+
+config SYS_CONFIG_NAME
+ default "mx53ppd"
+
+endif
diff --git a/board/ge/mx53ppd/MAINTAINERS b/board/ge/mx53ppd/MAINTAINERS
new file mode 100644
index 0000000..9b64b5d
--- /dev/null
+++ b/board/ge/mx53ppd/MAINTAINERS
@@ -0,0 +1,7 @@
+MX53PPD BOARD
+M: Antti Mäentausta <antti.maentausta@ge.com>
+M: Martyn Welch <martyn.welch@collabora.co.uk>
+S: Maintained
+F: board/freescale/mx53ppd/
+F: include/configs/mx53ppd.h
+F: configs/mx53ppd_defconfig
diff --git a/board/ge/mx53ppd/Makefile b/board/ge/mx53ppd/Makefile
new file mode 100644
index 0000000..928edfb
--- /dev/null
+++ b/board/ge/mx53ppd/Makefile
@@ -0,0 +1,12 @@
+# Copyright 2017 General Electric Company
+#
+# Based on board/freescale/mx53loco/Makefile:
+#
+# (C) Copyright 2011 Freescale Semiconductor, Inc.
+# Jason Liu <r64343@freescale.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += mx53ppd.o
+obj-$(CONFIG_VIDEO) += mx53ppd_video.o
diff --git a/board/ge/mx53ppd/imximage.cfg b/board/ge/mx53ppd/imximage.cfg
new file mode 100644
index 0000000..83ff4b8
--- /dev/null
+++ b/board/ge/mx53ppd/imximage.cfg
@@ -0,0 +1,87 @@
+/*
+ * Copyright 2017 General Electric Company
+ *
+ * Based on board/freescale/mx53loco/imximage.cfg:
+ *
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ * Jason Liu <r64343@freescale.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Refer doc/README.imximage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+/* image version */
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
+BOOT_FROM sd
+
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type Address Value
+ *
+ * where:
+ * Addr-type register length (1,2 or 4 bytes)
+ * Address absolute address of the register
+ * value value to be stored in the register
+ */
+DATA 4 0x53fa8004 0x00194005
+DATA 4 0x53fa8554 0x00300000
+DATA 4 0x53fa8558 0x00300040
+DATA 4 0x53fa8560 0x00300000
+DATA 4 0x53fa8564 0x00300040
+DATA 4 0x53fa8568 0x00300040
+DATA 4 0x53fa8570 0x00300000
+DATA 4 0x53fa8574 0x00300000
+DATA 4 0x53fa8578 0x00300000
+DATA 4 0x53fa857c 0x00300040
+DATA 4 0x53fa8580 0x00300040
+DATA 4 0x53fa8584 0x00300000
+DATA 4 0x53fa8588 0x00300000
+DATA 4 0x53fa8590 0x00300040
+DATA 4 0x53fa8594 0x00300000
+DATA 4 0x53fa86f0 0x00300000
+DATA 4 0x53fa86f4 0x00000000
+DATA 4 0x53fa86fc 0x00000000
+DATA 4 0x53fa8714 0x00000000
+DATA 4 0x53fa8718 0x00300000
+DATA 4 0x53fa871c 0x00300000
+DATA 4 0x53fa8720 0x00300000
+DATA 4 0x53fa8728 0x00300000
+DATA 4 0x53fa872c 0x00300000
+DATA 4 0x63fd9088 0x35343535
+DATA 4 0x63fd9090 0x4d444c44
+DATA 4 0x63fd907c 0x01370138
+DATA 4 0x63fd9080 0x013b013c
+DATA 4 0x63fd9018 0x00111740
+DATA 4 0x63fd9000 0x85190000
+DATA 4 0x63fd900c 0x8b8f52e3
+DATA 4 0x63fd9010 0xb68e8a63
+DATA 4 0x63fd9014 0x01ff00db
+DATA 4 0x63fd902c 0x000026d2
+DATA 4 0x63fd9030 0x008f0e21
+DATA 4 0x63fd9008 0x09333030
+DATA 4 0x63fd9004 0x0002002d
+DATA 4 0x63fd901c 0x00008032
+DATA 4 0x63fd901c 0x00008033
+DATA 4 0x63fd901c 0x00468031
+DATA 4 0x63fd901c 0x052080b0
+DATA 4 0x63fd901c 0x04008040
+DATA 4 0x63fd901c 0x0000803a
+DATA 4 0x63fd901c 0x0000803b
+DATA 4 0x63fd901c 0x00028039
+DATA 4 0x63fd901c 0x05208138
+DATA 4 0x63fd901c 0x04008048
+DATA 4 0x63fd9020 0x00005800
+DATA 4 0x63fd9040 0x05380003
+DATA 4 0x63fd9058 0x00011110
+DATA 4 0x63fd901c 0x00000000
diff --git a/board/ge/mx53ppd/mx53ppd.c b/board/ge/mx53ppd/mx53ppd.c
new file mode 100644
index 0000000..6a8a29d
--- /dev/null
+++ b/board/ge/mx53ppd/mx53ppd.c
@@ -0,0 +1,457 @@
+/*
+ * Copyright 2017 General Electric Company
+ *
+ * Based on board/freescale/mx53loco/mx53loco.c:
+ *
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ * Jason Liu <r64343@freescale.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/iomux-mx53.h>
+#include <asm/arch/clock.h>
+#include <linux/errno.h>
+#include <asm/mach-imx/mxc_i2c.h>
+#include <asm/mach-imx/mx5_video.h>
+#include <netdev.h>
+#include <i2c.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
+#include <asm/gpio.h>
+#include <power/pmic.h>
+#include <dialog_pmic.h>
+#include <fsl_pmic.h>
+#include <linux/fb.h>
+#include <ipu_pixfmt.h>
+#include <watchdog.h>
+#include "ppd_gpio.h"
+#include <stdlib.h>
+#include "../../ge/common/vpd_reader.h"
+#include <rtc.h>
+
+#define MX53PPD_LCD_POWER IMX_GPIO_NR(3, 24)
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Index of I2C1, SEGMENT 1 (see CONFIG_SYS_I2C_BUSES). */
+#define VPD_EEPROM_BUS 2
+
+/* Address of 24C08 EEPROM. */
+#define VPD_EEPROM_ADDR 0x50
+#define VPD_EEPROM_ADDR_LEN 1
+
+static u32 mx53_dram_size[2];
+
+phys_size_t get_effective_memsize(void)
+{
+ /*
+ * WARNING: We must override get_effective_memsize() function here
+ * to report only the size of the first DRAM bank. This is to make
+ * U-Boot relocator place U-Boot into valid memory, that is, at the
+ * end of the first DRAM bank. If we did not override this function
+ * like so, U-Boot would be placed at the address of the first DRAM
+ * bank + total DRAM size - sizeof(uboot), which in the setup where
+ * each DRAM bank contains 512MiB of DRAM would result in placing
+ * U-Boot into invalid memory area close to the end of the first
+ * DRAM bank.
+ */
+ return mx53_dram_size[0];
+}
+
+int dram_init(void)
+{
+ mx53_dram_size[0] = get_ram_size((void *)PHYS_SDRAM_1, 1 << 30);
+ mx53_dram_size[1] = get_ram_size((void *)PHYS_SDRAM_2, 1 << 30);
+
+ gd->ram_size = mx53_dram_size[0] + mx53_dram_size[1];
+
+ return 0;
+}
+
+int dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = mx53_dram_size[0];
+
+ gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+ gd->bd->bi_dram[1].size = mx53_dram_size[1];
+
+ return 0;
+}
+
+u32 get_board_rev(void)
+{
+ return get_cpu_rev() & ~(0xF << 8);
+}
+
+#define UART_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
+
+#ifdef CONFIG_USB_EHCI_MX5
+int board_ehci_hcd_init(int port)
+{
+ /* request VBUS power enable pin, GPIO7_8 */
+ imx_iomux_v3_setup_pad(MX53_PAD_PATA_DA_2__GPIO7_8);
+ gpio_direction_output(IMX_GPIO_NR(7, 8), 1);
+ return 0;
+}
+#endif
+
+static void setup_iomux_fec(void)
+{
+ static const iomux_v3_cfg_t fec_pads[] = {
+ NEW_PAD_CTRL(MX53_PAD_FEC_MDIO__FEC_MDIO, PAD_CTL_HYS |
+ PAD_CTL_DSE_HIGH | PAD_CTL_PUS_22K_UP |
+ PAD_CTL_ODE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_MDC__FEC_MDC, PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_FEC_RXD1__FEC_RDATA_1,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_RXD0__FEC_RDATA_0,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_TXD1__FEC_TDATA_1, PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_FEC_TXD0__FEC_TDATA_0, PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_FEC_TX_EN__FEC_TX_EN, PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_FEC_REF_CLK__FEC_TX_CLK,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_RX_ER__FEC_RX_ER,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_CRS_DV__FEC_RX_DV,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ };
+
+ imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
+}
+
+#ifdef CONFIG_FSL_ESDHC
+struct fsl_esdhc_cfg esdhc_cfg[2] = {
+ {MMC_SDHC3_BASE_ADDR},
+ {MMC_SDHC1_BASE_ADDR},
+};
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+ return 1;
+}
+
+#define SD_CMD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
+ PAD_CTL_PUS_100K_UP)
+#define SD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \
+ PAD_CTL_DSE_HIGH)
+
+int board_mmc_init(bd_t *bis)
+{
+ static const iomux_v3_cfg_t sd1_pads[] = {
+ NEW_PAD_CTRL(MX53_PAD_PATA_RESET_B__ESDHC3_CMD,
+ SD_CMD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_PATA_IORDY__ESDHC3_CLK, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA8__ESDHC3_DAT0, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA9__ESDHC3_DAT1, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA10__ESDHC3_DAT2, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA11__ESDHC3_DAT3, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA0__ESDHC3_DAT4, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA1__ESDHC3_DAT5, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA2__ESDHC3_DAT6, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA3__ESDHC3_DAT7, SD_PAD_CTRL),
+ MX53_PAD_EIM_DA11__GPIO3_11,
+ };
+
+ static const iomux_v3_cfg_t sd2_pads[] = {
+ NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL),
+ MX53_PAD_EIM_DA13__GPIO3_13,
+ };
+
+ u32 index;
+ int ret;
+
+ esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+ esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+
+ for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) {
+ switch (index) {
+ case 0:
+ imx_iomux_v3_setup_multiple_pads(sd1_pads,
+ ARRAY_SIZE(sd1_pads));
+ break;
+ case 1:
+ imx_iomux_v3_setup_multiple_pads(sd2_pads,
+ ARRAY_SIZE(sd2_pads));
+ break;
+ default:
+ printf("Warning: you configured more ESDHC controller (%d) as supported by the board(2)\n",
+ CONFIG_SYS_FSL_ESDHC_NUM);
+ return -EINVAL;
+ }
+ ret = fsl_esdhc_initialize(bis, &esdhc_cfg[index]);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+#endif
+
+#define I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
+
+static void setup_iomux_i2c(void)
+{
+ static const iomux_v3_cfg_t i2c1_pads[] = {
+ NEW_PAD_CTRL(MX53_PAD_CSI0_DAT8__I2C1_SDA, I2C_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_CSI0_DAT9__I2C1_SCL, I2C_PAD_CTRL),
+ };
+
+ imx_iomux_v3_setup_multiple_pads(i2c1_pads, ARRAY_SIZE(i2c1_pads));
+}
+
+#define I2C_PAD MUX_PAD_CTRL(I2C_PAD_CTRL)
+
+static struct i2c_pads_info i2c_pad_info1 = {
+ .scl = {
+ .i2c_mode = MX53_PAD_EIM_D21__I2C1_SCL | I2C_PAD,
+ .gpio_mode = MX53_PAD_EIM_D28__GPIO3_28 | I2C_PAD,
+ .gp = IMX_GPIO_NR(3, 28)
+ },
+ .sda = {
+ .i2c_mode = MX53_PAD_EIM_D28__I2C1_SDA | I2C_PAD,
+ .gpio_mode = MX53_PAD_EIM_D21__GPIO3_21 | I2C_PAD,
+ .gp = IMX_GPIO_NR(3, 21)
+ }
+};
+
+static int clock_1GHz(void)
+{
+ int ret;
+ u32 ref_clk = MXC_HCLK;
+ /*
+ * After increasing voltage to 1.25V, we can switch
+ * CPU clock to 1GHz and DDR to 400MHz safely
+ */
+ ret = mxc_set_clock(ref_clk, 1000, MXC_ARM_CLK);
+ if (ret) {
+ printf("CPU: Switch CPU clock to 1GHZ failed\n");
+ return -1;
+ }
+
+ ret = mxc_set_clock(ref_clk, 400, MXC_PERIPH_CLK);
+ ret |= mxc_set_clock(ref_clk, 400, MXC_DDR_CLK);
+ if (ret) {
+ printf("CPU: Switch DDR clock to 400MHz failed\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+void ppd_gpio_init(void)
+{
+ int i;
+
+ imx_iomux_v3_setup_multiple_pads(ppd_pads, ARRAY_SIZE(ppd_pads));
+ for (i = 0; i < ARRAY_SIZE(ppd_gpios); ++i)
+ gpio_direction_output(ppd_gpios[i].gpio, ppd_gpios[i].value);
+}
+
+int board_early_init_f(void)
+{
+ setup_iomux_fec();
+ setup_iomux_lcd();
+ ppd_gpio_init();
+
+ return 0;
+}
+
+/*
+ * Do not overwrite the console
+ * Use always serial for U-Boot console
+ */
+int overwrite_console(void)
+{
+ return 1;
+}
+
+#define VPD_TYPE_INVALID 0x00
+#define VPD_BLOCK_NETWORK 0x20
+#define VPD_BLOCK_HWID 0x44
+#define VPD_PRODUCT_PPD 4
+#define VPD_HAS_MAC1 0x1
+#define VPD_MAC_ADDRESS_LENGTH 6
+
+struct vpd_cache {
+ u8 product_id;
+ u8 has;
+ unsigned char mac1[VPD_MAC_ADDRESS_LENGTH];
+};
+
+/*
+ * Extracts MAC and product information from the VPD.
+ */
+static int vpd_callback(void *userdata, u8 id, u8 version, u8 type, size_t size,
+ u8 const *data)
+{
+ struct vpd_cache *vpd = (struct vpd_cache *)userdata;
+
+ if (id == VPD_BLOCK_HWID && version == 1 && type != VPD_TYPE_INVALID &&
+ size >= 1) {
+ vpd->product_id = data[0];
+
+ } else if (id == VPD_BLOCK_NETWORK && version == 1 &&
+ type != VPD_TYPE_INVALID) {
+ if (size >= 6) {
+ vpd->has |= VPD_HAS_MAC1;
+ memcpy(vpd->mac1, data, VPD_MAC_ADDRESS_LENGTH);
+ }
+ }
+
+ return 0;
+}
+
+static void process_vpd(struct vpd_cache *vpd)
+{
+ int fec_index = -1;
+
+ if (vpd->product_id == VPD_PRODUCT_PPD)
+ fec_index = 0;
+
+ if (fec_index >= 0 && (vpd->has & VPD_HAS_MAC1))
+ eth_env_set_enetaddr("ethaddr", vpd->mac1);
+}
+
+static int read_vpd(uint eeprom_bus)
+{
+ struct vpd_cache vpd;
+ int res;
+ int size = 1024;
+ u8 *data;
+ unsigned int current_i2c_bus = i2c_get_bus_num();
+
+ res = i2c_set_bus_num(eeprom_bus);
+ if (res < 0)
+ return res;
+
+ data = malloc(size);
+ if (!data)
+ return -ENOMEM;
+
+ res = i2c_read(VPD_EEPROM_ADDR, 0, VPD_EEPROM_ADDR_LEN, data, size);
+ if (res == 0) {
+ memset(&vpd, 0, sizeof(vpd));
+ vpd_reader(size, data, &vpd, vpd_callback);
+ process_vpd(&vpd);
+ }
+
+ free(data);
+
+ i2c_set_bus_num(current_i2c_bus);
+ return res;
+}
+
+static void check_time(void)
+{
+ int ret, i;
+ struct rtc_time tm;
+ u8 retry = 3;
+
+ unsigned int current_i2c_bus = i2c_get_bus_num();
+
+ ret = i2c_set_bus_num(CONFIG_SYS_RTC_BUS_NUM);
+ if (ret < 0)
+ return;
+
+ rtc_init();
+
+ for (i = 0; i < retry; i++) {
+ ret = rtc_get(&tm);
+ if (!ret || ret == -EINVAL)
+ break;
+ }
+
+ if (ret < 0)
+ env_set("rtc_status", "RTC_ERROR");
+
+ if (tm.tm_year > 2037) {
+ tm.tm_sec = 0;
+ tm.tm_min = 0;
+ tm.tm_hour = 0;
+ tm.tm_mday = 1;
+ tm.tm_wday = 2;
+ tm.tm_mon = 1;
+ tm.tm_year = 2036;
+
+ for (i = 0; i < retry; i++) {
+ ret = rtc_set(&tm);
+ if (!ret)
+ break;
+ }
+
+ if (ret < 0)
+ env_set("rtc_status", "RTC_ERROR");
+ }
+
+ i2c_set_bus_num(current_i2c_bus);
+}
+
+int board_init(void)
+{
+ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+ mxc_set_sata_internal_clock();
+ setup_iomux_i2c();
+
+ setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
+
+ return 0;
+}
+
+int misc_init_r(void)
+{
+ const char *cause;
+
+ /* We care about WDOG only, treating everything else as
+ * a power-on-reset.
+ */
+ if (get_imx_reset_cause() & 0x0010)
+ cause = "WDOG";
+ else
+ cause = "POR";
+
+ env_set("bootcause", cause);
+
+ return 0;
+}
+
+int board_late_init(void)
+{
+ int res;
+
+ read_vpd(VPD_EEPROM_BUS);
+
+ res = clock_1GHz();
+ if (res != 0)
+ return res;
+
+ print_cpuinfo();
+ hw_watchdog_init();
+
+ check_time();
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ puts("Board: GE PPD\n");
+
+ return 0;
+}
diff --git a/board/ge/mx53ppd/mx53ppd_video.c b/board/ge/mx53ppd/mx53ppd_video.c
new file mode 100644
index 0000000..45974bc
--- /dev/null
+++ b/board/ge/mx53ppd/mx53ppd_video.c
@@ -0,0 +1,135 @@
+/*
+ * Copyright 2017 General Electric Company
+ *
+ * Based on board/freescale/mx53loco/mx53loco_video.c:
+ *
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ * Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/list.h>
+#include <asm/gpio.h>
+#include <asm/arch/iomux-mx53.h>
+#include <linux/fb.h>
+#include <ipu_pixfmt.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/io.h>
+#include <pwm.h>
+#include "ppd_gpio.h"
+
+#define MX53PPD_LCD_POWER IMX_GPIO_NR(3, 24)
+
+static struct fb_videomode const nv_spwg = {
+ .name = "NV-SPWGRGB888",
+ .refresh = 60,
+ .xres = 800,
+ .yres = 480,
+ .pixclock = 15384,
+ .left_margin = 16,
+ .right_margin = 210,
+ .upper_margin = 10,
+ .lower_margin = 22,
+ .hsync_len = 30,
+ .vsync_len = 13,
+ .sync = FB_SYNC_EXT,
+ .vmode = FB_VMODE_NONINTERLACED
+};
+
+void setup_iomux_lcd(void)
+{
+ static const iomux_v3_cfg_t lcd_pads[] = {
+ MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK,
+ MX53_PAD_DI0_PIN15__IPU_DI0_PIN15,
+ MX53_PAD_DI0_PIN2__IPU_DI0_PIN2,
+ MX53_PAD_DI0_PIN3__IPU_DI0_PIN3,
+ MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0,
+ MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1,
+ MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2,
+ MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3,
+ MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4,
+ MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5,
+ MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6,
+ MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7,
+ MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8,
+ MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9,
+ MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10,
+ MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11,
+ MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12,
+ MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13,
+ MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14,
+ MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15,
+ MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16,
+ MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17,
+ MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18,
+ MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19,
+ MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20,
+ MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21,
+ MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22,
+ MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23,
+ };
+
+ imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
+}
+
+static void lcd_enable(void)
+{
+ struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+ struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
+
+ /* Set LDB_DI0 as clock source for IPU_DI0 */
+ clrsetbits_le32(&mxc_ccm->cscmr2,
+ MXC_CCM_CSCMR2_DI0_CLK_SEL_MASK,
+ MXC_CCM_CSCMR2_DI0_CLK_SEL(
+ MXC_CCM_CSCMR2_DI0_CLK_SEL_LDB_DI0_CLK));
+
+ /* Turn on IPU LDB DI0 clocks */
+ setbits_le32(&mxc_ccm->CCGR6, MXC_CCM_CCGR6_LDB_DI0(3));
+
+ /* Turn on IPU DI0 clocks */
+ setbits_le32(&mxc_ccm->CCGR6, MXC_CCM_CCGR6_IPU_DI0(3));
+
+ /* Configure LDB */
+ writel(IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG |
+ IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT |
+ IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0,
+ &iomux->gpr[2]);
+
+ /* Enable backlights */
+ pwm_init(1, 0, 0);
+
+ /* duty cycle 5000000ns, period: 5000000ns */
+ pwm_config(1, 5000000, 5000000);
+
+ /* Backlight Power */
+ gpio_direction_output(BACKLIGHT_ENABLE, 1);
+
+ pwm_enable(1);
+}
+
+static int do_lcd_enable(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ lcd_enable();
+ return 0;
+}
+
+U_BOOT_CMD(
+ ppd_lcd_enable, 1, 1, do_lcd_enable,
+ "enable PPD LCD",
+ "no parameters"
+);
+
+int board_video_skip(void)
+{
+ int ret;
+
+ ret = ipuv3_fb_init(&nv_spwg, 0, IPU_PIX_FMT_RGB24);
+ if (ret)
+ printf("Display cannot be configured: %d\n", ret);
+
+ return ret;
+}
diff --git a/board/ge/mx53ppd/ppd_gpio.h b/board/ge/mx53ppd/ppd_gpio.h
new file mode 100644
index 0000000..71a88a1
--- /dev/null
+++ b/board/ge/mx53ppd/ppd_gpio.h
@@ -0,0 +1,96 @@
+/*
+ * (C) Copyright 2015 General Electric Company
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __PPD_GPIO_H_
+#define __PPD_GPIO_H_
+
+#include <asm/arch/iomux-mx53.h>
+#include <asm/gpio.h>
+
+#define PPD_UART_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
+ PAD_CTL_PUS_100K_UP)
+
+static const iomux_v3_cfg_t ppd_pads[] = {
+ /* FEC */
+ MX53_PAD_EIM_A22__GPIO2_16,
+ /* UART */
+ NEW_PAD_CTRL(MX53_PAD_PATA_DMACK__UART1_RXD_MUX, PPD_UART_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DIOW__UART1_TXD_MUX, PPD_UART_PAD_CTRL),
+ /* Video */
+ MX53_PAD_CSI0_DATA_EN__GPIO5_20, /* LR_SCAN_CTRL */
+ MX53_PAD_CSI0_VSYNC__GPIO5_21, /* UD_SCAN_CTRL */
+ MX53_PAD_CSI0_DAT10__GPIO5_28, /* DATA_WIDTH_CTRL */
+ MX53_PAD_CSI0_PIXCLK__GPIO5_18, /* HOST_CONTROLLED_RESET_TO_LCD_N */
+ MX53_PAD_EIM_DA2__GPIO3_2, /* LVDS1_MUX_CTRL */
+ MX53_PAD_EIM_DA3__GPIO3_3, /* LVDS0_MUX_CTRL */
+ MX53_PAD_EIM_A21__GPIO2_17, /* ENABLE_PWR_TO_LCD_AND_UI_INTERFACE */
+ MX53_PAD_CSI0_DAT11__GPIO5_29, /* BACKLIGHT_ENABLE */
+ MX53_PAD_DISP0_DAT9__PWM2_PWMO, /* IMX535_PWM2_TO_LCD_CONNECTOR */
+ /* I2C */
+ MX53_PAD_EIM_A20__GPIO2_18, /* RESET_I2C1_BUS_SEGMENT_MUX_N */
+
+ /* SPI */
+ MX53_PAD_DISP0_DAT23__GPIO5_17,
+ MX53_PAD_KEY_COL2__GPIO4_10,
+ MX53_PAD_KEY_ROW2__GPIO4_11,
+ MX53_PAD_KEY_COL3__GPIO4_12,
+};
+
+struct gpio_cfg {
+ unsigned int gpio;
+ int value;
+};
+
+#define RESET_IMX535_ETHERNET_PHY_N IMX_GPIO_NR(2, 16)
+#define UD_SCAN_CTRL IMX_GPIO_NR(5, 21)
+#define LR_SCAN_CTRL IMX_GPIO_NR(5, 20)
+#define LVDS0_MUX_CTRL IMX_GPIO_NR(3, 3)
+#define LVDS1_MUX_CTRL IMX_GPIO_NR(3, 2)
+#define HOST_CONTROLLED_RESET_TO_LCD_N IMX_GPIO_NR(5, 18)
+#define DATA_WIDTH_CTRL IMX_GPIO_NR(5, 28)
+#define RESET_DP0_TRANSMITTER_N IMX_GPIO_NR(2, 28)
+#define RESET_DP1_TRANSMITTER_N IMX_GPIO_NR(2, 29)
+#define POWER_DOWN_LVDS0_DESERIALIZER_N IMX_GPIO_NR(2, 22)
+#define POWER_DOWN_LVDS1_DESERIALIZER_N IMX_GPIO_NR(2, 27)
+#define ENABLE_PWR_TO_LCD_AND_UI_INTERFACE IMX_GPIO_NR(2, 17)
+#define BACKLIGHT_ENABLE IMX_GPIO_NR(5, 29)
+#define RESET_I2C1_BUS_SEGMENT_MUX_N IMX_GPIO_NR(2, 18)
+#define ECSPI1_CS0 IMX_GPIO_NR(5, 17)
+#define ECSPI1_CS1 IMX_GPIO_NR(4, 10)
+#define ECSPI1_CS2 IMX_GPIO_NR(4, 11)
+#define ECSPI1_CS3 IMX_GPIO_NR(4, 12)
+
+static const struct gpio_cfg ppd_gpios[] = {
+ /* FEC */
+ /* Drive Low as GPIO output for 25ms per Eth Phy IX spec */
+ /* Then Drive High as GPIO output to bring Eth Phy IC out of reset */
+ { RESET_IMX535_ETHERNET_PHY_N, 0 },
+ { RESET_IMX535_ETHERNET_PHY_N, 1 },
+ /* Video */
+ { UD_SCAN_CTRL, 0 },
+ { LR_SCAN_CTRL, 1 },
+#ifdef PROPRIETARY_CHANGES
+ { LVDS0_MUX_CTRL, 1 },
+#else
+ { LVDS0_MUX_CTRL, 0 },
+#endif
+ { LVDS1_MUX_CTRL, 1 },
+ { HOST_CONTROLLED_RESET_TO_LCD_N, 1 },
+ { DATA_WIDTH_CTRL, 0 },
+ { RESET_DP0_TRANSMITTER_N, 1 },
+ { RESET_DP1_TRANSMITTER_N, 1 },
+ { POWER_DOWN_LVDS0_DESERIALIZER_N, 1 },
+ { POWER_DOWN_LVDS1_DESERIALIZER_N, 1 },
+ { ENABLE_PWR_TO_LCD_AND_UI_INTERFACE, 1 },
+ { BACKLIGHT_ENABLE, 0 },
+ { RESET_I2C1_BUS_SEGMENT_MUX_N, 1 },
+ { ECSPI1_CS0, 1 },
+ { ECSPI1_CS1, 1 },
+ { ECSPI1_CS2, 1 },
+ { ECSPI1_CS3, 1 },
+};
+
+#endif /* __PPD_GPIO_H_ */
diff --git a/board/theobroma-systems/lion_rk3368/fit_spl_atf.its b/board/theobroma-systems/lion_rk3368/fit_spl_atf.its
index 60daddc..e3bea5e 100644
--- a/board/theobroma-systems/lion_rk3368/fit_spl_atf.its
+++ b/board/theobroma-systems/lion_rk3368/fit_spl_atf.its
@@ -17,6 +17,7 @@
description = "U-Boot (64-bit)";
data = /incbin/("../../../u-boot-nodtb.bin");
type = "standalone";
+ os = "U-Boot";
arch = "arm64";
compression = "none";
load = <0x00200000>;
@@ -25,6 +26,7 @@
description = "ARM Trusted Firmware";
data = /incbin/("../../../bl31-rk3368.bin");
type = "firmware";
+ os = "arm-trusted-firmware";
arch = "arm64";
compression = "none";
load = <0x00100000>;
@@ -43,8 +45,8 @@
default = "conf";
conf {
description = "Theobroma Systems RK3368-uQ7 (Puma) SoM";
- firmware = "uboot";
- loadables = "atf";
+ firmware = "atf";
+ loadables = "uboot";
fdt = "fdt";
};
};
diff --git a/board/theobroma-systems/puma_rk3399/fit_spl_atf.its b/board/theobroma-systems/puma_rk3399/fit_spl_atf.its
index 520f846..cb7d92f 100644
--- a/board/theobroma-systems/puma_rk3399/fit_spl_atf.its
+++ b/board/theobroma-systems/puma_rk3399/fit_spl_atf.its
@@ -17,6 +17,7 @@
description = "U-Boot (64-bit)";
data = /incbin/("../../../u-boot-nodtb.bin");
type = "standalone";
+ os = "U-Boot";
arch = "arm64";
compression = "none";
load = <0x00200000>;
@@ -26,16 +27,17 @@
data = /incbin/("../../../bl31-rk3399.bin");
type = "firmware";
arch = "arm64";
+ os = "arm-trusted-firmware";
compression = "none";
- load = <0x00001000>;
- entry = <0x00001000>;
+ load = <0x1000>;
+ entry = <0x1000>;
};
pmu {
description = "Cortex-M0 firmware";
data = /incbin/("../../../rk3399m0.bin");
type = "pmu-firmware";
compression = "none";
- load = <0xff8c0000>;
+ load = <0x180000>;
};
fdt {
description = "RK3399-Q7 (Puma) flat device-tree";
@@ -49,8 +51,8 @@
default = "conf";
conf {
description = "Theobroma Systems RK3399-Q7 (Puma) SoM";
- firmware = "uboot";
- loadables = "atf";
+ firmware = "atf";
+ loadables = "uboot", "pmu";
fdt = "fdt";
};
};
diff --git a/board/ti/omap5_uevm/evm.c b/board/ti/omap5_uevm/evm.c
index 4b25cc2..67242f5 100644
--- a/board/ti/omap5_uevm/evm.c
+++ b/board/ti/omap5_uevm/evm.c
@@ -249,7 +249,7 @@
return omap_ehci_hcd_stop();
}
-void usb_hub_reset_devices(int port)
+void usb_hub_reset_devices(struct usb_hub_device *hub, int port)
{
/* The LAN9730 needs to be reset after the port power has been set. */
if (port == 3) {
diff --git a/board/wandboard/spl.c b/board/wandboard/spl.c
index d6f568b..5b9622e 100644
--- a/board/wandboard/spl.c
+++ b/board/wandboard/spl.c
@@ -399,6 +399,8 @@
mx6dq_dram_iocfg(64, &mx6dq_ddr_ioregs, &mx6dq_grp_ioregs);
mx6_dram_cfg(&mem_q, &mx6q_2g_mmdc_calib, &h5t04g63afr);
}
+
+ udelay(100);
}
void board_init_f(ulong dummy)
diff --git a/cmd/usb.c b/cmd/usb.c
index d95bcf5..907debe 100644
--- a/cmd/usb.c
+++ b/cmd/usb.c
@@ -349,6 +349,16 @@
printf(" %s", pre);
#ifdef CONFIG_DM_USB
has_child = device_has_active_children(dev->dev);
+ if (device_get_uclass_id(dev->dev) == UCLASS_MASS_STORAGE) {
+ struct udevice *child;
+
+ for (device_find_first_child(dev->dev, &child);
+ child;
+ device_find_next_child(&child)) {
+ if (device_get_uclass_id(child) == UCLASS_BLK)
+ has_child = 0;
+ }
+ }
#else
/* check if the device has connected children */
int i;
@@ -414,8 +424,12 @@
udev = dev_get_parent_priv(child);
- /* Ignore emulators, we only want real devices */
- if (device_get_uclass_id(child) != UCLASS_USB_EMUL) {
+ /*
+ * Ignore emulators and block child devices, we only want
+ * real devices
+ */
+ if ((device_get_uclass_id(child) != UCLASS_USB_EMUL) &&
+ (device_get_uclass_id(child) != UCLASS_BLK)) {
usb_show_tree_graph(udev, pre);
pre[index] = 0;
}
@@ -605,7 +619,9 @@
for (device_find_first_child(udev->dev, &child);
child;
device_find_next_child(&child)) {
- if (device_active(child)) {
+ if (device_active(child) &&
+ (device_get_uclass_id(child) != UCLASS_USB_EMUL) &&
+ (device_get_uclass_id(child) != UCLASS_BLK)) {
udev = dev_get_parent_priv(child);
usb_show_info(udev);
}
diff --git a/common/fdt_support.c b/common/fdt_support.c
index f4f9543..6896dcb 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -410,6 +410,45 @@
return p - (char *)buf;
}
+int fdt_record_loadable(void *blob, u32 index, const char *name,
+ uintptr_t load_addr, u32 size, uintptr_t entry_point,
+ const char *type, const char *os)
+{
+ int err, node;
+
+ err = fdt_check_header(blob);
+ if (err < 0) {
+ printf("%s: %s\n", __func__, fdt_strerror(err));
+ return err;
+ }
+
+ /* find or create "/fit-images" node */
+ node = fdt_find_or_add_subnode(blob, 0, "fit-images");
+ if (node < 0)
+ return node;
+
+ /* find or create "/fit-images/<name>" node */
+ node = fdt_find_or_add_subnode(blob, node, name);
+ if (node < 0)
+ return node;
+
+ /*
+ * We record these as 32bit entities, possibly truncating addresses.
+ * However, spl_fit.c is not 64bit safe either: i.e. we should not
+ * have an issue here.
+ */
+ fdt_setprop_u32(blob, node, "load-addr", load_addr);
+ if (entry_point != -1)
+ fdt_setprop_u32(blob, node, "entry-point", entry_point);
+ fdt_setprop_u32(blob, node, "size", size);
+ if (type)
+ fdt_setprop_string(blob, node, "type", type);
+ if (os)
+ fdt_setprop_string(blob, node, "os", os);
+
+ return node;
+}
+
#ifdef CONFIG_NR_DRAM_BANKS
#define MEMORY_BANKS_MAX CONFIG_NR_DRAM_BANKS
#else
diff --git a/common/image.c b/common/image.c
index 06fdca1..4ec4744 100644
--- a/common/image.c
+++ b/common/image.c
@@ -95,6 +95,7 @@
static const table_entry_t uimage_os[] = {
{ IH_OS_INVALID, "invalid", "Invalid OS", },
+ { IH_OS_ARM_TRUSTED_FIRMWARE, "arm-trusted-firmware", "ARM Trusted Firmware" },
{ IH_OS_LINUX, "linux", "Linux", },
#if defined(CONFIG_LYNXKDI) || defined(USE_HOSTCC)
{ IH_OS_LYNXOS, "lynxos", "LynxOS", },
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index c62b82fd..aef0034 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -228,6 +228,21 @@
SHA256 variant is supported: SHA512 and others are not currently
supported in U-Boot.
+config SPL_FIT_IMAGE_TINY
+ bool "Remove functionality from SPL FIT loading to reduce size"
+ depends on SPL_FIT
+ default y if MACH_SUN50I || MACH_SUN50I_H5
+ help
+ Enable this to reduce the size of the FIT image loading code
+ in SPL, if space for the SPL binary is very tight.
+
+ This removes the detection of image types (which forces the
+ first image to be treated as having a U-Boot style calling
+ convention) and skips the recording of each loaded payload
+ (i.e. loadable) into the FDT (modifying the loaded FDT to
+ ensure this information is available to the next image
+ invoked).
+
config SPL_CPU_SUPPORT
bool "Support CPU drivers"
help
@@ -702,7 +717,7 @@
means of transmitting U-Boot over a serial line for using in SPL,
with a checksum to ensure correctness.
-config SPL_ATF_SUPPORT
+config SPL_ATF
bool "Support ARM Trusted Firmware"
depends on ARM64
help
@@ -710,12 +725,6 @@
is loaded by SPL(which is considered as BL2 in ATF terminology).
More detail at: https://github.com/ARM-software/arm-trusted-firmware
-config SPL_ATF_TEXT_BASE
- depends on SPL_ATF_SUPPORT
- hex "ATF BL31 base address"
- help
- This is the base address in memory for ATF BL31 text and entry point.
-
config TPL
bool
depends on SUPPORT_TPL
diff --git a/common/spl/Makefile b/common/spl/Makefile
index e229947..9bf8a2d 100644
--- a/common/spl/Makefile
+++ b/common/spl/Makefile
@@ -22,7 +22,7 @@
obj-$(CONFIG_$(SPL_TPL_)UBI) += spl_ubi.o
obj-$(CONFIG_$(SPL_TPL_)NET_SUPPORT) += spl_net.o
obj-$(CONFIG_$(SPL_TPL_)MMC_SUPPORT) += spl_mmc.o
-obj-$(CONFIG_$(SPL_TPL_)ATF_SUPPORT) += spl_atf.o
+obj-$(CONFIG_$(SPL_TPL_)ATF) += spl_atf.o
obj-$(CONFIG_$(SPL_TPL_)USB_SUPPORT) += spl_usb.o
obj-$(CONFIG_$(SPL_TPL_)FAT_SUPPORT) += spl_fat.o
obj-$(CONFIG_$(SPL_TPL_)EXT_SUPPORT) += spl_ext.o
diff --git a/common/spl/spl.c b/common/spl/spl.c
index d232f67..3bb20c7 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -418,6 +418,12 @@
case IH_OS_U_BOOT:
debug("Jumping to U-Boot\n");
break;
+#if CONFIG_IS_ENABLED(ATF)
+ case IH_OS_ARM_TRUSTED_FIRMWARE:
+ debug("Jumping to U-Boot via ARM Trusted Firmware\n");
+ spl_invoke_atf(&spl_image);
+ break;
+#endif
#ifdef CONFIG_SPL_OS_BOOT
case IH_OS_LINUX:
debug("Jumping to Linux\n");
@@ -442,11 +448,6 @@
debug("Failed to stash bootstage: err=%d\n", ret);
#endif
- if (CONFIG_IS_ENABLED(ATF_SUPPORT)) {
- debug("loaded - jumping to U-Boot via ATF BL31.\n");
- bl31_entry();
- }
-
debug("loaded - jumping to U-Boot...\n");
spl_board_prepare_for_boot();
jump_to_image_no_args(&spl_image);
diff --git a/common/spl/spl_atf.c b/common/spl/spl_atf.c
index 6e8f928..63557c0 100644
--- a/common/spl/spl_atf.c
+++ b/common/spl/spl_atf.c
@@ -5,6 +5,7 @@
* reserved.
* Copyright (C) 2016 Rockchip Electronic Co.,Ltd
* Written by Kever Yang <kever.yang@rock-chips.com>
+ * Copyright (C) 2017 Theobroma Systems Design und Consulting GmbH
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -30,7 +31,7 @@
*
* @return bl31 params structure pointer
*/
-struct bl31_params *bl2_plat_get_bl31_params(void)
+static struct bl31_params *bl2_plat_get_bl31_params(uintptr_t bl33_entry)
{
struct entry_point_info *bl33_ep_info;
@@ -66,7 +67,7 @@
/* BL33 expects to receive the primary CPU MPID (through x0) */
bl33_ep_info->args.arg0 = 0xffff & read_mpidr();
- bl33_ep_info->pc = CONFIG_SYS_TEXT_BASE;
+ bl33_ep_info->pc = bl33_entry;
bl33_ep_info->spsr = SPSR_64(MODE_EL2, MODE_SP_ELX,
DISABLE_ALL_EXECPTIONS);
@@ -77,21 +78,88 @@
return bl2_to_bl31_params;
}
-void raw_write_daif(unsigned int daif)
+static inline void raw_write_daif(unsigned int daif)
{
__asm__ __volatile__("msr DAIF, %0\n\t" : : "r" (daif) : "memory");
}
-void bl31_entry(void)
+typedef void (*atf_entry_t)(struct bl31_params *params, void *plat_params);
+
+static void bl31_entry(uintptr_t bl31_entry, uintptr_t bl33_entry,
+ uintptr_t fdt_addr)
{
struct bl31_params *bl31_params;
- void (*entry)(struct bl31_params *params, void *plat_params) = NULL;
+ atf_entry_t atf_entry = (atf_entry_t)bl31_entry;
- bl31_params = bl2_plat_get_bl31_params();
- entry = (void *)CONFIG_SPL_ATF_TEXT_BASE;
+ bl31_params = bl2_plat_get_bl31_params(bl33_entry);
raw_write_daif(SPSR_EXCEPTION_MASK);
dcache_disable();
- entry(bl31_params, NULL);
+ atf_entry((void *)bl31_params, (void *)fdt_addr);
+}
+
+static int spl_fit_images_find_uboot(void *blob)
+{
+ int parent, node, ndepth;
+ const void *data;
+
+ if (!blob)
+ return -FDT_ERR_BADMAGIC;
+
+ parent = fdt_path_offset(blob, "/fit-images");
+ if (parent < 0)
+ return -FDT_ERR_NOTFOUND;
+
+ for (node = fdt_next_node(blob, parent, &ndepth);
+ (node >= 0) && (ndepth > 0);
+ node = fdt_next_node(blob, node, &ndepth)) {
+ if (ndepth != 1)
+ continue;
+
+ data = fdt_getprop(blob, node, FIT_OS_PROP, NULL);
+ if (!data)
+ continue;
+
+ if (genimg_get_os_id(data) == IH_OS_U_BOOT)
+ return node;
+ };
+
+ return -FDT_ERR_NOTFOUND;
+}
+
+uintptr_t spl_fit_images_get_entry(void *blob, int node)
+{
+ ulong val;
+
+ val = fdt_getprop_u32(blob, node, "entry-point");
+ if (val == FDT_ERROR)
+ val = fdt_getprop_u32(blob, node, "load-addr");
+
+ debug("%s: entry point 0x%lx\n", __func__, val);
+ return val;
+}
+
+void spl_invoke_atf(struct spl_image_info *spl_image)
+{
+ uintptr_t bl33_entry = CONFIG_SYS_TEXT_BASE;
+ void *blob = spl_image->fdt_addr;
+ int node;
+
+ /*
+ * Find the U-Boot binary (in /fit-images) load addreess or
+ * entry point (if different) and pass it as the BL3-3 entry
+ * point.
+ * This will need to be extended to support Falcon mode.
+ */
+
+ node = spl_fit_images_find_uboot(blob);
+ if (node >= 0)
+ bl33_entry = spl_fit_images_get_entry(blob, node);
+
+ /*
+ * We don't provide a BL3-2 entry yet, but this will be possible
+ * using similar logic.
+ */
+ bl31_entry(spl_image->entry_point, bl33_entry, (uintptr_t)blob);
}
diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c
index 32d9ee5..72ae8f4 100644
--- a/common/spl/spl_fit.c
+++ b/common/spl/spl_fit.c
@@ -2,7 +2,7 @@
* Copyright (C) 2016 Google, Inc
* Written by Simon Glass <sjg@chromium.org>
*
- * SPDX-License-Identifier: GPL-2.0+
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
@@ -16,22 +16,24 @@
#endif
/**
- * spl_fit_get_image_node(): By using the matching configuration subnode,
+ * spl_fit_get_image_name(): By using the matching configuration subnode,
* retrieve the name of an image, specified by a property name and an index
* into that.
* @fit: Pointer to the FDT blob.
* @images: Offset of the /images subnode.
* @type: Name of the property within the configuration subnode.
* @index: Index into the list of strings in this property.
+ * @outname: Name of the image
*
- * Return: the node offset of the respective image node or a negative
- * error number.
+ * Return: 0 on success, or a negative error number
*/
-static int spl_fit_get_image_node(const void *fit, int images,
- const char *type, int index)
+static int spl_fit_get_image_name(const void *fit, int images,
+ const char *type, int index,
+ char **outname)
{
const char *name, *str;
- int node, conf_node;
+ __maybe_unused int node;
+ int conf_node;
int len, i;
conf_node = fit_find_config_node(fit);
@@ -63,7 +65,35 @@
}
}
+ *outname = (char *)str;
+ return 0;
+}
+
+/**
+ * spl_fit_get_image_node(): By using the matching configuration subnode,
+ * retrieve the name of an image, specified by a property name and an index
+ * into that.
+ * @fit: Pointer to the FDT blob.
+ * @images: Offset of the /images subnode.
+ * @type: Name of the property within the configuration subnode.
+ * @index: Index into the list of strings in this property.
+ *
+ * Return: the node offset of the respective image node or a negative
+ * error number.
+ */
+static int spl_fit_get_image_node(const void *fit, int images,
+ const char *type, int index)
+{
+ char *str;
+ int err;
+ int node;
+
+ err = spl_fit_get_image_name(fit, images, type, index, &str);
+ if (err)
+ return err;
+
debug("%s: '%s'\n", type, str);
+
node = fdt_subnode_offset(fit, images, str);
if (node < 0) {
debug("cannot find image node '%s': %d\n", str, node);
@@ -116,15 +146,15 @@
* @info: points to information about the device to load data from
* @sector: the start sector of the FIT image on the device
* @fit: points to the flattened device tree blob describing the FIT
- * image
+ * image
* @base_offset: the beginning of the data area containing the actual
* image data, relative to the beginning of the FIT
* @node: offset of the DT node describing the image to load (relative
- * to @fit)
+ * to @fit)
* @image_info: will be filled with information about the loaded image
- * If the FIT node does not contain a "load" (address) property,
- * the image gets loaded to the address pointed to by the
- * load_addr member in this struct.
+ * If the FIT node does not contain a "load" (address) property,
+ * the image gets loaded to the address pointed to by the
+ * load_addr member in this struct.
*
* Return: 0 on success or a negative error number.
*/
@@ -218,6 +248,73 @@
return 0;
}
+static int spl_fit_append_fdt(struct spl_image_info *spl_image,
+ struct spl_load_info *info, ulong sector,
+ void *fit, int images, ulong base_offset)
+{
+ struct spl_image_info image_info;
+ int node, ret;
+
+ /* Figure out which device tree the board wants to use */
+ node = spl_fit_get_image_node(fit, images, FIT_FDT_PROP, 0);
+ if (node < 0) {
+ debug("%s: cannot find FDT node\n", __func__);
+ return node;
+ }
+
+ /*
+ * Read the device tree and place it after the image.
+ * Align the destination address to ARCH_DMA_MINALIGN.
+ */
+ image_info.load_addr = spl_image->load_addr + spl_image->size;
+ ret = spl_load_fit_image(info, sector, fit, base_offset, node,
+ &image_info);
+
+ if (ret < 0)
+ return ret;
+
+ /* Make the load-address of the FDT available for the SPL framework */
+ spl_image->fdt_addr = (void *)image_info.load_addr;
+#if !CONFIG_IS_ENABLED(FIT_IMAGE_TINY)
+ /* Try to make space, so we can inject details on the loadables */
+ ret = fdt_shrink_to_minimum(spl_image->fdt_addr, 8192);
+#endif
+
+ return ret;
+}
+
+static int spl_fit_record_loadable(const void *fit, int images, int index,
+ void *blob, struct spl_image_info *image)
+{
+ int ret = 0;
+#if !CONFIG_IS_ENABLED(FIT_IMAGE_TINY)
+ char *name;
+ int node;
+
+ ret = spl_fit_get_image_name(fit, images, "loadables",
+ index, &name);
+ if (ret < 0)
+ return ret;
+
+ node = spl_fit_get_image_node(fit, images, "loadables", index);
+
+ ret = fdt_record_loadable(blob, index, name, image->load_addr,
+ image->size, image->entry_point,
+ fdt_getprop(fit, node, "type", NULL),
+ fdt_getprop(fit, node, "os", NULL));
+#endif
+ return ret;
+}
+
+static int spl_fit_image_get_os(const void *fit, int noffset, uint8_t *os)
+{
+#if CONFIG_IS_ENABLED(FIT_IMAGE_TINY)
+ return -ENOTSUPP;
+#else
+ return fit_image_get_os(fit, noffset, os);
+#endif
+}
+
int spl_load_simple_fit(struct spl_image_info *spl_image,
struct spl_load_info *info, ulong sector, void *fit)
{
@@ -225,7 +322,6 @@
ulong size;
unsigned long count;
struct spl_image_info image_info;
- bool boot_os = false;
int node = -1;
int images, ret;
int base_offset, align_len = ARCH_DMA_MINALIGN - 1;
@@ -273,17 +369,18 @@
return -1;
}
-#ifdef CONFIG_SPL_OS_BOOT
- /* Find OS image first */
- node = spl_fit_get_image_node(fit, images, FIT_KERNEL_PROP, 0);
- if (node < 0)
- debug("No kernel image.\n");
- else
- boot_os = true;
-#endif
- /* find the U-Boot image */
+ /*
+ * Find the U-Boot image using the following search order:
+ * - start at 'firmware' (e.g. an ARM Trusted Firmware)
+ * - fall back 'kernel' (e.g. a Falcon-mode OS boot
+ * - fall back to using the first 'loadables' entry
+ */
if (node < 0)
node = spl_fit_get_image_node(fit, images, "firmware", 0);
+#ifdef CONFIG_SPL_OS_BOOT
+ if (node < 0)
+ node = spl_fit_get_image_node(fit, images, FIT_KERNEL_PROP, 0);
+#endif
if (node < 0) {
debug("could not find firmware image, trying loadables...\n");
node = spl_fit_get_image_node(fit, images, "loadables", 0);
@@ -305,34 +402,29 @@
if (ret)
return ret;
-#ifdef CONFIG_SPL_OS_BOOT
- if (!fit_image_get_os(fit, node, &spl_image->os))
+ /*
+ * For backward compatibility, we treat the first node that is
+ * as a U-Boot image, if no OS-type has been declared.
+ */
+ if (!spl_fit_image_get_os(fit, node, &spl_image->os))
debug("Image OS is %s\n", genimg_get_os_name(spl_image->os));
-#else
- spl_image->os = IH_OS_U_BOOT;
+#if !defined(CONFIG_SPL_OS_BOOT)
+ else
+ spl_image->os = IH_OS_U_BOOT;
#endif
- if (!boot_os) {
- /* Figure out which device tree the board wants to use */
- node = spl_fit_get_image_node(fit, images, FIT_FDT_PROP, 0);
- if (node < 0) {
- debug("%s: cannot find FDT node\n", __func__);
- return node;
- }
-
- /*
- * Read the device tree and place it after the image.
- * Align the destination address to ARCH_DMA_MINALIGN.
- */
- image_info.load_addr = spl_image->load_addr + spl_image->size;
- ret = spl_load_fit_image(info, sector, fit, base_offset, node,
- &image_info);
- if (ret < 0)
- return ret;
- }
+ /*
+ * Booting a next-stage U-Boot may require us to append the FDT.
+ * We allow this to fail, as the U-Boot image might embed its FDT.
+ */
+ if (spl_image->os == IH_OS_U_BOOT)
+ spl_fit_append_fdt(spl_image, info, sector, fit,
+ images, base_offset);
/* Now check if there are more images for us to load */
for (; ; index++) {
+ uint8_t os_type = IH_OS_INVALID;
+
node = spl_fit_get_image_node(fit, images, "loadables", index);
if (node < 0)
break;
@@ -342,6 +434,15 @@
if (ret < 0)
continue;
+ if (!spl_fit_image_get_os(fit, node, &os_type))
+ debug("Loadable is %s\n", genimg_get_os_name(os_type));
+
+ if (os_type == IH_OS_U_BOOT) {
+ spl_fit_append_fdt(&image_info, info, sector,
+ fit, images, base_offset);
+ spl_image->fdt_addr = image_info.fdt_addr;
+ }
+
/*
* If the "firmware" image did not provide an entry point,
* use the first valid entry point from the loadables.
@@ -349,6 +450,12 @@
if (spl_image->entry_point == FDT_ERROR &&
image_info.entry_point != FDT_ERROR)
spl_image->entry_point = image_info.entry_point;
+
+ /* Record our loadables into the FDT */
+ if (spl_image->fdt_addr)
+ spl_fit_record_loadable(fit, images, index,
+ spl_image->fdt_addr,
+ &image_info);
}
/*
diff --git a/common/usb_hub.c b/common/usb_hub.c
index 325d16d..024dadb 100644
--- a/common/usb_hub.c
+++ b/common/usb_hub.c
@@ -57,7 +57,7 @@
static LIST_HEAD(usb_scan_list);
-__weak void usb_hub_reset_devices(int port)
+__weak void usb_hub_reset_devices(struct usb_hub_device *hub, int port)
{
return;
}
@@ -853,7 +853,7 @@
* should occur in the board file of the device.
*/
for (i = 0; i < dev->maxchild; i++)
- usb_hub_reset_devices(i + 1);
+ usb_hub_reset_devices(hub, i + 1);
/*
* Only add the connected USB devices, including potential hubs,
diff --git a/configs/am335x_hs_evm_defconfig b/configs/am335x_hs_evm_defconfig
index 9bc9dc3..48b0e85 100644
--- a/configs/am335x_hs_evm_defconfig
+++ b/configs/am335x_hs_evm_defconfig
@@ -1,4 +1,6 @@
CONFIG_ARM=y
+# CONFIG_SPL_USE_ARCH_MEMCPY is not set
+# CONFIG_SPL_USE_ARCH_MEMSET is not set
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_TI_COMMON_CMD_OPTIONS=y
CONFIG_AM33XX=y
diff --git a/configs/cgtqmx6eval_defconfig b/configs/cgtqmx6eval_defconfig
index 3521500..47c0b4c 100644
--- a/configs/cgtqmx6eval_defconfig
+++ b/configs/cgtqmx6eval_defconfig
@@ -10,7 +10,7 @@
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6QDL"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_BOOTDELAY=3
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
diff --git a/configs/cm_fx6_defconfig b/configs/cm_fx6_defconfig
index 68ae70e..0773aca 100644
--- a/configs/cm_fx6_defconfig
+++ b/configs/cm_fx6_defconfig
@@ -13,7 +13,7 @@
CONFIG_DEFAULT_DEVICE_TREE="imx6q-cm-fx6"
CONFIG_AHCI=y
CONFIG_OF_BOARD_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6QDL"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_BOOTDELAY=3
CONFIG_SPL=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x80
diff --git a/configs/dh_imx6_defconfig b/configs/dh_imx6_defconfig
index 175f9fa..814df1c 100644
--- a/configs/dh_imx6_defconfig
+++ b/configs/dh_imx6_defconfig
@@ -10,7 +10,7 @@
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_FIT=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6QDL"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_BOOTDELAY=3
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
CONFIG_SPL=y
diff --git a/configs/firefly-rk3399_defconfig b/configs/firefly-rk3399_defconfig
index dc3cda4..731222c 100644
--- a/configs/firefly-rk3399_defconfig
+++ b/configs/firefly-rk3399_defconfig
@@ -12,8 +12,7 @@
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
-CONFIG_SPL_ATF_SUPPORT=y
-CONFIG_SPL_ATF_TEXT_BASE=0x00010000
+CONFIG_SPL_ATF=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPT=y
CONFIG_CMD_MMC=y
diff --git a/configs/gwventana_emmc_defconfig b/configs/gwventana_emmc_defconfig
index 76bfbfd..5379cf3 100644
--- a/configs/gwventana_emmc_defconfig
+++ b/configs/gwventana_emmc_defconfig
@@ -14,7 +14,7 @@
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6QDL"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_BOOTDELAY=3
# CONFIG_SYS_STDIO_DEREGISTER is not set
# CONFIG_DISPLAY_BOARDINFO is not set
diff --git a/configs/gwventana_gw5904_defconfig b/configs/gwventana_gw5904_defconfig
index 9e6e458..fe364d0 100644
--- a/configs/gwventana_gw5904_defconfig
+++ b/configs/gwventana_gw5904_defconfig
@@ -14,7 +14,7 @@
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6QDL"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_BOOTDELAY=3
# CONFIG_SYS_STDIO_DEREGISTER is not set
# CONFIG_DISPLAY_BOARDINFO is not set
diff --git a/configs/gwventana_nand_defconfig b/configs/gwventana_nand_defconfig
index c9e8b8b..dd4d73c 100644
--- a/configs/gwventana_nand_defconfig
+++ b/configs/gwventana_nand_defconfig
@@ -15,7 +15,7 @@
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6QDL"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_BOOTDELAY=3
# CONFIG_SYS_STDIO_DEREGISTER is not set
# CONFIG_DISPLAY_BOARDINFO is not set
diff --git a/configs/imx6qdl_icore_mmc_defconfig b/configs/imx6qdl_icore_mmc_defconfig
index 6e93c49..256ccb9 100644
--- a/configs/imx6qdl_icore_mmc_defconfig
+++ b/configs/imx6qdl_icore_mmc_defconfig
@@ -3,7 +3,7 @@
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_MX6Q_ICORE=y
+CONFIG_TARGET_MX6Q_ENGICAM=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
@@ -48,3 +48,4 @@
CONFIG_IMX_THERMAL=y
CONFIG_VIDEO=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
diff --git a/configs/imx6qdl_icore_nand_defconfig b/configs/imx6qdl_icore_nand_defconfig
index ab8b6d2..21cfb85 100644
--- a/configs/imx6qdl_icore_nand_defconfig
+++ b/configs/imx6qdl_icore_nand_defconfig
@@ -3,7 +3,7 @@
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_MX6Q_ICORE=y
+CONFIG_TARGET_MX6Q_ENGICAM=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
# CONFIG_CMD_BMODE is not set
diff --git a/configs/imx6qdl_icore_rqs_defconfig b/configs/imx6qdl_icore_rqs_defconfig
index fbe9651..aaf9646 100644
--- a/configs/imx6qdl_icore_rqs_defconfig
+++ b/configs/imx6qdl_icore_rqs_defconfig
@@ -3,7 +3,7 @@
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_MX6Q_ICORE_RQS=y
+CONFIG_TARGET_MX6Q_ENGICAM=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
@@ -16,6 +16,7 @@
CONFIG_BOOTDELAY=3
CONFIG_SPL=y
CONFIG_SPL_EXT_SUPPORT=y
+CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="icorem6qdl-rqs> "
CONFIG_CRC32_VERIFY=y
@@ -40,3 +41,4 @@
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
CONFIG_MXC_UART=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
diff --git a/configs/imx6ul_geam_mmc_defconfig b/configs/imx6ul_geam_mmc_defconfig
index ce7c288..b2ac4a2 100644
--- a/configs/imx6ul_geam_mmc_defconfig
+++ b/configs/imx6ul_geam_mmc_defconfig
@@ -3,7 +3,7 @@
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_MX6UL_GEAM=y
+CONFIG_TARGET_MX6UL_ENGICAM=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
@@ -40,3 +40,4 @@
CONFIG_PINCTRL_IMX6=y
CONFIG_MXC_UART=y
CONFIG_IMX_THERMAL=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
diff --git a/configs/imx6ul_geam_nand_defconfig b/configs/imx6ul_geam_nand_defconfig
index 4e51892..d920af7 100644
--- a/configs/imx6ul_geam_nand_defconfig
+++ b/configs/imx6ul_geam_nand_defconfig
@@ -3,7 +3,7 @@
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_MX6UL_GEAM=y
+CONFIG_TARGET_MX6UL_ENGICAM=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
# CONFIG_CMD_BMODE is not set
diff --git a/configs/imx6ul_isiot_emmc_defconfig b/configs/imx6ul_isiot_emmc_defconfig
index 94af53e..72ae08e 100644
--- a/configs/imx6ul_isiot_emmc_defconfig
+++ b/configs/imx6ul_isiot_emmc_defconfig
@@ -3,7 +3,7 @@
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_MX6UL_ISIOT=y
+CONFIG_TARGET_MX6UL_ENGICAM=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
@@ -38,3 +38,4 @@
CONFIG_PINCTRL_IMX6=y
CONFIG_MXC_UART=y
CONFIG_IMX_THERMAL=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
diff --git a/configs/imx6ul_isiot_mmc_defconfig b/configs/imx6ul_isiot_mmc_defconfig
index 0a990d7..ffd12bf 100644
--- a/configs/imx6ul_isiot_mmc_defconfig
+++ b/configs/imx6ul_isiot_mmc_defconfig
@@ -3,7 +3,7 @@
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_MX6UL_ISIOT=y
+CONFIG_TARGET_MX6UL_ENGICAM=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
@@ -40,3 +40,4 @@
CONFIG_PINCTRL_IMX6=y
CONFIG_MXC_UART=y
CONFIG_IMX_THERMAL=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
diff --git a/configs/imx6ul_isiot_nand_defconfig b/configs/imx6ul_isiot_nand_defconfig
index dde1cc2..aaaf9e6 100644
--- a/configs/imx6ul_isiot_nand_defconfig
+++ b/configs/imx6ul_isiot_nand_defconfig
@@ -3,7 +3,7 @@
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_MX6UL_ISIOT=y
+CONFIG_TARGET_MX6UL_ENGICAM=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
# CONFIG_CMD_BMODE is not set
diff --git a/configs/lion-rk3368_defconfig b/configs/lion-rk3368_defconfig
index 8dae75c..9548b96 100644
--- a/configs/lion-rk3368_defconfig
+++ b/configs/lion-rk3368_defconfig
@@ -32,8 +32,7 @@
CONFIG_TPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_STACK_R=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200
-CONFIG_SPL_ATF_SUPPORT=y
-CONFIG_SPL_ATF_TEXT_BASE=0x10000
+CONFIG_SPL_ATF=y
CONFIG_TPL=y
CONFIG_TPL_BOOTROM_SUPPORT=y
CONFIG_TPL_DRIVERS_MISC_SUPPORT=y
diff --git a/configs/mccmon6_nor_defconfig b/configs/mccmon6_nor_defconfig
index 0f9794c..7c46579 100644
--- a/configs/mccmon6_nor_defconfig
+++ b/configs/mccmon6_nor_defconfig
@@ -5,7 +5,7 @@
CONFIG_TARGET_MCCMON6=y
CONFIG_SPL_SERIAL_SUPPORT=y
# CONFIG_CMD_BMODE is not set
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/liebherr/mccmon6/mon6_imximage_nor.cfg,MX6QDL"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/liebherr/mccmon6/mon6_imximage_nor.cfg"
CONFIG_SPL=y
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_ENV_SUPPORT=y
diff --git a/configs/mccmon6_sd_defconfig b/configs/mccmon6_sd_defconfig
index 01a20e6..97f7f9a 100644
--- a/configs/mccmon6_sd_defconfig
+++ b/configs/mccmon6_sd_defconfig
@@ -6,7 +6,7 @@
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
# CONFIG_CMD_BMODE is not set
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/liebherr/mccmon6/mon6_imximage_sd.cfg,MX6QDL"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/liebherr/mccmon6/mon6_imximage_sd.cfg"
CONFIG_SPL=y
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_ENV_SUPPORT=y
diff --git a/configs/mx53ppd_defconfig b/configs/mx53ppd_defconfig
new file mode 100644
index 0000000..0ab19e9
--- /dev/null
+++ b/configs/mx53ppd_defconfig
@@ -0,0 +1,39 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX5=y
+CONFIG_TARGET_MX53PPD=y
+CONFIG_FIT=y
+CONFIG_BOOTCOUNT=y
+CONFIG_BOOTCOUNT_EXT=y
+CONFIG_SYS_BOOTCOUNT_EXT_INTERFACE="mmc"
+CONFIG_SYS_BOOTCOUNT_EXT_DEVPART="0:5"
+CONFIG_SYS_BOOTCOUNT_EXT_NAME="/boot/failures"
+CONFIG_SYS_BOOTCOUNT_ADDR=0x7000A000
+CONFIG_NETDEVICES=y
+CONFIG_VIDEO=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/ge/mx53ppd/imximage.cfg"
+CONFIG_BOOTDELAY=1
+# CONFIG_CONSOLE_MUX is not set
+CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
+CONFIG_DISPLAY_CPUINFO=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_I2C=y
+CONFIG_RTC_S35392A=y
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_USB=y
+CONFIG_USB_STORAGE=y
+# CONFIG_VIDEO_SW_CURSOR is not set
+CONFIG_OF_LIBFDT=y
+
+CONFIG_MMC=y
diff --git a/configs/mx6cuboxi_defconfig b/configs/mx6cuboxi_defconfig
index bd7917e..37a2f2a 100644
--- a/configs/mx6cuboxi_defconfig
+++ b/configs/mx6cuboxi_defconfig
@@ -12,7 +12,7 @@
CONFIG_CMD_HDMIDETECT=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6QDL"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
# CONFIG_SYS_STDIO_DEREGISTER is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL=y
diff --git a/configs/mx6sabreauto_defconfig b/configs/mx6sabreauto_defconfig
index 7e344a1..98c39bb 100644
--- a/configs/mx6sabreauto_defconfig
+++ b/configs/mx6sabreauto_defconfig
@@ -8,7 +8,7 @@
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,SPL,MX6QDL"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_BOOTDELAY=3
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
diff --git a/configs/mx6sabresd_defconfig b/configs/mx6sabresd_defconfig
index 90102b3..caed261 100644
--- a/configs/mx6sabresd_defconfig
+++ b/configs/mx6sabresd_defconfig
@@ -8,7 +8,7 @@
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6QDL"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_BOOTDELAY=3
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
diff --git a/configs/mx6sxsabresd_defconfig b/configs/mx6sxsabresd_defconfig
index 1ec672e..2c184f6 100644
--- a/configs/mx6sxsabresd_defconfig
+++ b/configs/mx6sxsabresd_defconfig
@@ -12,6 +12,7 @@
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
+CONFIG_CMD_PART=y
CONFIG_CMD_PCI=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
diff --git a/configs/pfla02_defconfig b/configs/pfla02_defconfig
index 456ae65..029c9de 100644
--- a/configs/pfla02_defconfig
+++ b/configs/pfla02_defconfig
@@ -12,7 +12,7 @@
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_CMD_HDMIDETECT=y
CONFIG_FIT=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6QDL"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL=y
diff --git a/configs/pico-imx6ul_defconfig b/configs/pico-imx6ul_defconfig
index 09b36cc..f28f9b7 100644
--- a/configs/pico-imx6ul_defconfig
+++ b/configs/pico-imx6ul_defconfig
@@ -12,7 +12,9 @@
CONFIG_CMD_DFU=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
CONFIG_CMD_MMC=y
+CONFIG_CMD_PART=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_CMD_DHCP=y
diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig
index ebbf8a9..18705ed 100644
--- a/configs/puma-rk3399_defconfig
+++ b/configs/puma-rk3399_defconfig
@@ -5,6 +5,8 @@
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_ROCKCHIP_RK3399=y
+CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0
+CONFIG_ROCKCHIP_BOOT_MODE_REG=0x0
CONFIG_TARGET_PUMA_RK3399=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
@@ -23,6 +25,7 @@
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_ATF=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
diff --git a/configs/udoo_defconfig b/configs/udoo_defconfig
index f064928..b92b181 100644
--- a/configs/udoo_defconfig
+++ b/configs/udoo_defconfig
@@ -8,7 +8,7 @@
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6QDL"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL=y
diff --git a/configs/wandboard_defconfig b/configs/wandboard_defconfig
index d053db7..4b6b9d9 100644
--- a/configs/wandboard_defconfig
+++ b/configs/wandboard_defconfig
@@ -11,7 +11,6 @@
CONFIG_CMD_HDMIDETECT=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6QDL"
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
diff --git a/doc/git-mailrc b/doc/git-mailrc
index 556db0a..5a365cd 100644
--- a/doc/git-mailrc
+++ b/doc/git-mailrc
@@ -133,6 +133,7 @@
alias spmi uboot, mateusz
alias ubi uboot, hs
alias usb uboot, marex
+alias xhci uboot, bmeng
alias video uboot, ag
alias patman uboot, sjg
alias buildman uboot, sjg
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 613e602..c2e813f 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -10,6 +10,8 @@
source "drivers/block/Kconfig"
+source "drivers/bootcount/Kconfig"
+
source "drivers/clk/Kconfig"
source "drivers/cpu/Kconfig"
diff --git a/drivers/bootcount/Kconfig b/drivers/bootcount/Kconfig
new file mode 100644
index 0000000..c9d627c
--- /dev/null
+++ b/drivers/bootcount/Kconfig
@@ -0,0 +1,58 @@
+#
+# Boot count configuration
+#
+
+menu "Boot count support"
+
+config BOOTCOUNT
+ bool "Enable Boot count support"
+ help
+ Enable boot count support, which provides the ability to store the
+ number of times the board has booted on a number of different
+ persistent storage mediums.
+
+if BOOTCOUNT
+
+config BOOTCOUNT_EXT
+ bool "Boot counter on EXT filesystem"
+ help
+ Add support for maintaining boot count in a file on an EXT
+ filesystem.
+
+if BOOTCOUNT_EXT
+
+config SYS_BOOTCOUNT_EXT_INTERFACE
+ string "Interface on which to find boot counter EXT filesystem"
+ default "mmc"
+ depends on BOOTCOUNT_EXT
+ help
+ Set the interface to use when locating the filesystem to use for the
+ boot counter.
+
+config SYS_BOOTCOUNT_EXT_DEVPART
+ string "Partition of the boot counter EXT filesystem"
+ default "0:1"
+ depends on BOOTCOUNT_EXT
+ help
+ Set the partition to use when locating the filesystem to use for the
+ boot counter.
+
+config SYS_BOOTCOUNT_EXT_NAME
+ string "Path and filename of the EXT filesystem based boot counter"
+ default "/boot/failures"
+ depends on BOOTCOUNT_EXT
+ help
+ Set the filename and path of the file used to store the boot counter.
+
+config SYS_BOOTCOUNT_ADDR
+ hex "RAM address used for reading and writing the boot counter"
+ default 0x7000A000
+ depends on BOOTCOUNT_EXT
+ help
+ Set the address used for reading and writing the boot counter.
+
+endif
+
+endif
+
+endmenu
diff --git a/drivers/bootcount/Makefile b/drivers/bootcount/Makefile
index ed9659a..45445d2 100644
--- a/drivers/bootcount/Makefile
+++ b/drivers/bootcount/Makefile
@@ -9,3 +9,4 @@
obj-$(CONFIG_BOOTCOUNT_RAM) += bootcount_ram.o
obj-$(CONFIG_BOOTCOUNT_ENV) += bootcount_env.o
obj-$(CONFIG_BOOTCOUNT_I2C) += bootcount_i2c.o
+obj-$(CONFIG_BOOTCOUNT_EXT) += bootcount_ext.o
diff --git a/drivers/bootcount/bootcount_ext.c b/drivers/bootcount/bootcount_ext.c
new file mode 100644
index 0000000..e0dd21b
--- /dev/null
+++ b/drivers/bootcount/bootcount_ext.c
@@ -0,0 +1,62 @@
+/*
+ * Copyright (c) 2017 General Electric Company. All rights reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <bootcount.h>
+#include <fs.h>
+#include <mapmem.h>
+
+#define BC_MAGIC 0xbc
+
+void bootcount_store(ulong a)
+{
+ u8 *buf;
+ loff_t len;
+ int ret;
+
+ if (fs_set_blk_dev(CONFIG_SYS_BOOTCOUNT_EXT_INTERFACE,
+ CONFIG_SYS_BOOTCOUNT_EXT_DEVPART, FS_TYPE_EXT)) {
+ puts("Error selecting device\n");
+ return;
+ }
+
+ buf = map_sysmem(CONFIG_SYS_BOOTCOUNT_ADDR, 2);
+ buf[0] = BC_MAGIC;
+ buf[1] = (a & 0xff);
+ unmap_sysmem(buf);
+
+ ret = fs_write(CONFIG_SYS_BOOTCOUNT_EXT_NAME,
+ CONFIG_SYS_BOOTCOUNT_ADDR, 0, 2, &len);
+ if (ret != 0)
+ puts("Error storing bootcount\n");
+}
+
+ulong bootcount_load(void)
+{
+ u8 *buf;
+ loff_t len_read;
+ int ret;
+
+ if (fs_set_blk_dev(CONFIG_SYS_BOOTCOUNT_EXT_INTERFACE,
+ CONFIG_SYS_BOOTCOUNT_EXT_DEVPART, FS_TYPE_EXT)) {
+ puts("Error selecting device\n");
+ return 0;
+ }
+
+ ret = fs_read(CONFIG_SYS_BOOTCOUNT_EXT_NAME, CONFIG_SYS_BOOTCOUNT_ADDR,
+ 0, 2, &len_read);
+ if (ret != 0 || len_read != 2) {
+ puts("Error loading bootcount\n");
+ return 0;
+ }
+
+ buf = map_sysmem(CONFIG_SYS_BOOTCOUNT_ADDR, 2);
+ if (buf[0] == BC_MAGIC)
+ ret = buf[1];
+
+ unmap_sysmem(buf);
+
+ return ret;
+}
diff --git a/drivers/clk/rockchip/clk_rk3399.c b/drivers/clk/rockchip/clk_rk3399.c
index e21d056..2e85ac7 100644
--- a/drivers/clk/rockchip/clk_rk3399.c
+++ b/drivers/clk/rockchip/clk_rk3399.c
@@ -569,11 +569,6 @@
.sel_shift = CLK_SPI5_PLL_SEL_SHIFT, },
};
-static inline u32 extract_bits(u32 val, unsigned width, unsigned shift)
-{
- return (val >> shift) & ((1 << width) - 1);
-}
-
static ulong rk3399_spi_get_clk(struct rk3399_cru *cru, ulong clk_id)
{
const struct spi_clkreg *spiclk = NULL;
@@ -590,7 +585,8 @@
}
val = readl(&cru->clksel_con[spiclk->reg]);
- div = extract_bits(val, CLK_SPI_PLL_DIV_CON_WIDTH, spiclk->div_shift);
+ div = bitfield_extract(val, spiclk->div_shift,
+ CLK_SPI_PLL_DIV_CON_WIDTH);
return DIV_TO_RATE(GPLL_HZ, div);
}
diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
index abf1da2..205274e 100644
--- a/drivers/i2c/mxc_i2c.c
+++ b/drivers/i2c/mxc_i2c.c
@@ -317,16 +317,19 @@
temp |= I2CR_MTX | I2CR_TX_NO_AK;
writeb(temp, base + (I2CR << reg_shift));
- /* write slave address */
- ret = tx_byte(i2c_bus, chip << 1);
- if (ret < 0)
- return ret;
-
- while (alen--) {
- ret = tx_byte(i2c_bus, (addr >> (alen * 8)) & 0xff);
+ if (alen >= 0) {
+ /* write slave address */
+ ret = tx_byte(i2c_bus, chip << 1);
if (ret < 0)
return ret;
+
+ while (alen--) {
+ ret = tx_byte(i2c_bus, (addr >> (alen * 8)) & 0xff);
+ if (ret < 0)
+ return ret;
+ }
}
+
return 0;
}
@@ -537,9 +540,11 @@
if (ret < 0)
return ret;
- temp = readb(base + (I2CR << reg_shift));
- temp |= I2CR_RSTA;
- writeb(temp, base + (I2CR << reg_shift));
+ if (alen >= 0) {
+ temp = readb(base + (I2CR << reg_shift));
+ temp |= I2CR_RSTA;
+ writeb(temp, base + (I2CR << reg_shift));
+ }
ret = tx_byte(i2c_bus, (chip << 1) | 1);
if (ret < 0) {
diff --git a/drivers/pinctrl/nxp/pinctrl-imx6.c b/drivers/pinctrl/nxp/pinctrl-imx6.c
index 0f767d9..cac577b 100644
--- a/drivers/pinctrl/nxp/pinctrl-imx6.c
+++ b/drivers/pinctrl/nxp/pinctrl-imx6.c
@@ -13,6 +13,11 @@
static struct imx_pinctrl_soc_info imx6_pinctrl_soc_info;
+/* FIXME Before reloaction, BSS is overlapped with DT area */
+static struct imx_pinctrl_soc_info imx6ul_pinctrl_soc_info = {
+ .flags = ZERO_OFFSET_VALID,
+};
+
static struct imx_pinctrl_soc_info imx6_snvs_pinctrl_soc_info = {
.flags = ZERO_OFFSET_VALID,
};
@@ -32,7 +37,7 @@
{ .compatible = "fsl,imx6sll-iomuxc-snvs", .data = (ulong)&imx6_snvs_pinctrl_soc_info },
{ .compatible = "fsl,imx6sll-iomuxc", .data = (ulong)&imx6_pinctrl_soc_info },
{ .compatible = "fsl,imx6sx-iomuxc", .data = (ulong)&imx6_pinctrl_soc_info },
- { .compatible = "fsl,imx6ul-iomuxc", .data = (ulong)&imx6_pinctrl_soc_info },
+ { .compatible = "fsl,imx6ul-iomuxc", .data = (ulong)&imx6ul_pinctrl_soc_info },
{ .compatible = "fsl,imx6ull-iomuxc-snvs", .data = (ulong)&imx6_snvs_pinctrl_soc_info },
{ /* sentinel */ }
};
diff --git a/drivers/pinctrl/rockchip/pinctrl_rk3399.c b/drivers/pinctrl/rockchip/pinctrl_rk3399.c
index cab268c..19a7415 100644
--- a/drivers/pinctrl/rockchip/pinctrl_rk3399.c
+++ b/drivers/pinctrl/rockchip/pinctrl_rk3399.c
@@ -70,11 +70,21 @@
PMUGRF_GPIO1C0_SEL_MASK,
PMUGRF_I2C0PMU_SCL << PMUGRF_GPIO1C0_SEL_SHIFT);
break;
+ case PERIPH_ID_I2C8:
+ rk_clrsetreg(&pmugrf->gpio1c_iomux,
+ PMUGRF_GPIO1C4_SEL_MASK,
+ PMUGRF_I2C8PMU_SDA << PMUGRF_GPIO1C4_SEL_SHIFT);
+ rk_clrsetreg(&pmugrf->gpio1c_iomux,
+ PMUGRF_GPIO1C5_SEL_MASK,
+ PMUGRF_I2C8PMU_SCL << PMUGRF_GPIO1C5_SEL_SHIFT);
+ break;
case PERIPH_ID_I2C1:
case PERIPH_ID_I2C2:
case PERIPH_ID_I2C3:
case PERIPH_ID_I2C4:
case PERIPH_ID_I2C5:
+ case PERIPH_ID_I2C6:
+ case PERIPH_ID_I2C7:
default:
debug("i2c id = %d iomux error!\n", i2c_id);
break;
@@ -301,6 +311,9 @@
case PERIPH_ID_I2C3:
case PERIPH_ID_I2C4:
case PERIPH_ID_I2C5:
+ case PERIPH_ID_I2C6:
+ case PERIPH_ID_I2C7:
+ case PERIPH_ID_I2C8:
pinctrl_rk3399_i2c_config(priv->grf, priv->pmugrf, func);
break;
case PERIPH_ID_SPI0:
@@ -375,6 +388,12 @@
return PERIPH_ID_I2C4;
case 38:
return PERIPH_ID_I2C5;
+ case 37:
+ return PERIPH_ID_I2C6;
+ case 36:
+ return PERIPH_ID_I2C7;
+ case 58:
+ return PERIPH_ID_I2C8;
case 65:
return PERIPH_ID_SDMMC1;
#if CONFIG_IS_ENABLED(GMAC_ROCKCHIP)
diff --git a/drivers/pwm/pwm-imx-util.c b/drivers/pwm/pwm-imx-util.c
index 534dd8e..97ac0c8 100644
--- a/drivers/pwm/pwm-imx-util.c
+++ b/drivers/pwm/pwm-imx-util.c
@@ -23,10 +23,12 @@
return (struct pwm_regs *)PWM1_BASE_ADDR;
case 1:
return (struct pwm_regs *)PWM2_BASE_ADDR;
+#ifdef CONFIG_MX6
case 2:
return (struct pwm_regs *)PWM3_BASE_ADDR;
case 3:
return (struct pwm_regs *)PWM4_BASE_ADDR;
+#endif
#ifdef CONFIG_MX6SX
case 4:
return (struct pwm_regs *)PWM5_BASE_ADDR;
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index d06130c7..2964bb2 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -30,4 +30,10 @@
Support for Dallas Semiconductor (now Maxim) DS1307 and DS1338/9 and
compatible Real Time Clock devices.
+config RTC_S35392A
+ bool "Enable S35392A driver"
+ select BITREVERSE
+ help
+ Enable s35392a driver which provides rtc get and set function.
+
endmenu
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 003e31a..7a8f97a 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -49,5 +49,6 @@
obj-$(CONFIG_RTC_RV3029) += rv3029.o
obj-$(CONFIG_RTC_RX8025) += rx8025.o
obj-$(CONFIG_RTC_S3C24X0) += s3c24x0_rtc.o
+obj-$(CONFIG_RTC_S35392A) += s35392a.o
obj-$(CONFIG_SANDBOX) += sandbox_rtc.o
obj-$(CONFIG_RTC_X1205) += x1205.o
diff --git a/drivers/rtc/s35392a.c b/drivers/rtc/s35392a.c
new file mode 100644
index 0000000..9adcefc
--- /dev/null
+++ b/drivers/rtc/s35392a.c
@@ -0,0 +1,365 @@
+/*
+ * SII Semiconductor Corporation S35392A RTC driver.
+ *
+ * Copyright (c) 2017, General Electric Company
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <command.h>
+#include <common.h>
+#include <dm.h>
+#include <i2c.h>
+#include <linux/bitrev.h>
+#include <rtc.h>
+
+#define S35390A_CMD_STATUS1 0x30
+#define S35390A_CMD_STATUS2 0x31
+#define S35390A_CMD_TIME1 0x32
+#define S35390A_CMD_TIME2 0x33
+#define S35390A_CMD_INT2_REG1 0x35
+
+#define S35390A_BYTE_YEAR 0
+#define S35390A_BYTE_MONTH 1
+#define S35390A_BYTE_DAY 2
+#define S35390A_BYTE_WDAY 3
+#define S35390A_BYTE_HOURS 4
+#define S35390A_BYTE_MINS 5
+#define S35390A_BYTE_SECS 6
+
+/* flags for STATUS1 */
+#define S35390A_FLAG_POC 0x01
+#define S35390A_FLAG_BLD 0x02
+#define S35390A_FLAG_INT2 0x04
+#define S35390A_FLAG_24H 0x40
+#define S35390A_FLAG_RESET 0x80
+
+/*
+ * If either BLD or POC is set, then the chip has lost power long enough for
+ * the time value to become invalid.
+ */
+#define S35390A_LOW_VOLTAGE (S35390A_FLAG_POC | S35390A_FLAG_BLD)
+
+/*---------------------------------------------------------------------*/
+#undef DEBUG_RTC
+
+#ifdef DEBUG_RTC
+#define DEBUGR(fmt, args...) printf(fmt, ##args)
+#else
+#define DEBUGR(fmt, args...)
+#endif
+/*---------------------------------------------------------------------*/
+
+#ifdef CONFIG_DM_RTC
+#define DEV_TYPE struct udevice
+#else
+/* Local udevice */
+struct ludevice {
+ u8 chip;
+};
+
+#define DEV_TYPE struct ludevice
+struct ludevice dev;
+
+#endif
+
+#define msleep(a) udelay(a * 1000)
+
+int lowvoltage;
+
+static int s35392a_rtc_reset(DEV_TYPE *dev);
+
+static int s35392a_rtc_read(DEV_TYPE *dev, u8 reg, u8 *buf, int len)
+{
+ int ret;
+
+#ifdef CONFIG_DM_RTC
+ /* TODO: we need to tweak the chip address to reg */
+ ret = dm_i2c_read(dev, 0, buf, len);
+#else
+ (void)dev;
+ ret = i2c_read(reg, 0, -1, buf, len);
+#endif
+
+ return ret;
+}
+
+static int s35392a_rtc_write(DEV_TYPE *dev, u8 reg, u8 *buf, int len)
+{
+ int ret;
+
+#ifdef CONFIG_DM_RTC
+ /* TODO: we need to tweak the chip address to reg */
+ ret = dm_i2c_write(dev, 0, buf, 1);
+#else
+ (void)dev;
+ ret = i2c_write(reg, 0, 0, buf, len);
+#endif
+
+ return ret;
+}
+
+static int s35392a_rtc_read8(DEV_TYPE *dev, unsigned int reg)
+{
+ u8 val;
+ int ret;
+
+ ret = s35392a_rtc_read(dev, reg, &val, sizeof(val));
+ return ret < 0 ? ret : val;
+}
+
+static int s35392a_rtc_write8(DEV_TYPE *dev, unsigned int reg, int val)
+{
+ int ret;
+ u8 lval = val;
+
+ ret = s35392a_rtc_write(dev, reg, &lval, sizeof(lval));
+ return ret < 0 ? ret : 0;
+}
+
+static int validate_time(const struct rtc_time *tm)
+{
+ if ((tm->tm_year < 2000) || (tm->tm_year > 2099))
+ return -EINVAL;
+
+ if ((tm->tm_mon < 1) || (tm->tm_mon > 12))
+ return -EINVAL;
+
+ if ((tm->tm_mday < 1) || (tm->tm_mday > 31))
+ return -EINVAL;
+
+ if ((tm->tm_wday < 0) || (tm->tm_wday > 6))
+ return -EINVAL;
+
+ if ((tm->tm_hour < 0) || (tm->tm_hour > 23))
+ return -EINVAL;
+
+ if ((tm->tm_min < 0) || (tm->tm_min > 59))
+ return -EINVAL;
+
+ if ((tm->tm_sec < 0) || (tm->tm_sec > 59))
+ return -EINVAL;
+
+ return 0;
+}
+
+void s35392a_rtc_init(DEV_TYPE *dev)
+{
+ int status;
+
+ status = s35392a_rtc_read8(dev, S35390A_CMD_STATUS1);
+ if (status < 0)
+ goto error;
+
+ DEBUGR("init: S35390A_CMD_STATUS1: 0x%x\n", status);
+
+ lowvoltage = status & S35390A_LOW_VOLTAGE ? 1 : 0;
+
+ if (status & S35390A_FLAG_POC)
+ /*
+ * Do not communicate for 0.5 seconds since the power-on
+ * detection circuit is in operation.
+ */
+ msleep(500);
+
+ else if (!lowvoltage)
+ /*
+ * If both POC and BLD are unset everything is fine.
+ */
+ return;
+
+ if (lowvoltage)
+ printf("RTC low voltage detected\n");
+
+ if (!s35392a_rtc_reset(dev))
+ return;
+
+error:
+ printf("Error RTC init.\n");
+}
+
+/* Get the current time from the RTC */
+static int s35392a_rtc_get(DEV_TYPE *dev, struct rtc_time *tm)
+{
+ u8 date[7];
+ int ret, i;
+
+ if (lowvoltage) {
+ DEBUGR("RTC low voltage detected\n");
+ return -EINVAL;
+ }
+
+ ret = s35392a_rtc_read(dev, S35390A_CMD_TIME1, date, sizeof(date));
+ if (ret < 0) {
+ DEBUGR("Error reading date from RTC\n");
+ return -EIO;
+ }
+
+ /* This chip returns the bits of each byte in reverse order */
+ for (i = 0; i < 7; ++i)
+ date[i] = bitrev8(date[i]);
+
+ tm->tm_sec = bcd2bin(date[S35390A_BYTE_SECS]);
+ tm->tm_min = bcd2bin(date[S35390A_BYTE_MINS]);
+ tm->tm_hour = bcd2bin(date[S35390A_BYTE_HOURS] & ~S35390A_FLAG_24H);
+ tm->tm_wday = bcd2bin(date[S35390A_BYTE_WDAY]);
+ tm->tm_mday = bcd2bin(date[S35390A_BYTE_DAY]);
+ tm->tm_mon = bcd2bin(date[S35390A_BYTE_MONTH]);
+ tm->tm_year = bcd2bin(date[S35390A_BYTE_YEAR]) + 2000;
+
+ DEBUGR("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
+ tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday,
+ tm->tm_hour, tm->tm_min, tm->tm_sec);
+
+ return 0;
+}
+
+/* Set the RTC */
+static int s35392a_rtc_set(DEV_TYPE *dev, const struct rtc_time *tm)
+{
+ int i, ret;
+ int status;
+ u8 date[7];
+
+ DEBUGR("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
+ tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday,
+ tm->tm_hour, tm->tm_min, tm->tm_sec);
+
+ ret = validate_time(tm);
+ if (ret < 0)
+ return -EINVAL;
+
+ /* We support only 24h mode */
+ ret = s35392a_rtc_read8(dev, S35390A_CMD_STATUS1);
+ if (ret < 0)
+ return -EIO;
+ status = ret;
+
+ ret = s35392a_rtc_write8(dev, S35390A_CMD_STATUS1,
+ status | S35390A_FLAG_24H);
+ if (ret < 0)
+ return -EIO;
+
+ date[S35390A_BYTE_YEAR] = bin2bcd(tm->tm_year - 2000);
+ date[S35390A_BYTE_MONTH] = bin2bcd(tm->tm_mon);
+ date[S35390A_BYTE_DAY] = bin2bcd(tm->tm_mday);
+ date[S35390A_BYTE_WDAY] = bin2bcd(tm->tm_wday);
+ date[S35390A_BYTE_HOURS] = bin2bcd(tm->tm_hour);
+ date[S35390A_BYTE_MINS] = bin2bcd(tm->tm_min);
+ date[S35390A_BYTE_SECS] = bin2bcd(tm->tm_sec);
+
+ /* This chip expects the bits of each byte to be in reverse order */
+ for (i = 0; i < 7; ++i)
+ date[i] = bitrev8(date[i]);
+
+ ret = s35392a_rtc_write(dev, S35390A_CMD_TIME1, date, sizeof(date));
+ if (ret < 0) {
+ DEBUGR("Error writing date to RTC\n");
+ return -EIO;
+ }
+
+ /* Now we have time. Reset the low voltage status */
+ lowvoltage = 0;
+
+ return 0;
+}
+
+/* Reset the RTC. */
+static int s35392a_rtc_reset(DEV_TYPE *dev)
+{
+ int buf;
+ int ret;
+ unsigned int initcount = 0;
+
+ buf = S35390A_FLAG_RESET;
+
+initialize:
+ ret = s35392a_rtc_write8(dev, S35390A_CMD_STATUS1, buf);
+ if (ret < 0)
+ return -EIO;
+
+ ret = s35392a_rtc_read8(dev, S35390A_CMD_STATUS1);
+ if (ret < 0)
+ return -EIO;
+ buf = ret;
+
+ if (!lowvoltage)
+ lowvoltage = buf & S35390A_LOW_VOLTAGE ? 1 : 0;
+
+ if (buf & S35390A_LOW_VOLTAGE) {
+ /* Try up to five times to reset the chip */
+ if (initcount < 5) {
+ ++initcount;
+ goto initialize;
+ } else {
+ return -EIO;
+ }
+ }
+
+ return 0;
+}
+
+#ifndef CONFIG_DM_RTC
+
+int rtc_get(struct rtc_time *tm)
+{
+ return s35392a_rtc_get(&dev, tm);
+}
+
+int rtc_set(struct rtc_time *tm)
+{
+ return s35392a_rtc_set(&dev, tm);
+}
+
+void rtc_reset(void)
+{
+ s35392a_rtc_reset(&dev);
+}
+
+void rtc_init(void)
+{
+ s35392a_rtc_init(&dev);
+}
+
+#else
+
+static int s35392a_probe(struct udevice *dev)
+{
+ s35392a_rtc_init(dev);
+ return 0;
+}
+
+static const struct rtc_ops s35392a_rtc_ops = {
+ .get = s35392a_rtc_get,
+ .set = s35392a_rtc_set,
+ .read8 = s35392a_rtc_read8,
+ .write8 = s35392a_rtc_write8,
+ .reset = s35392a_rtc_reset,
+};
+
+static const struct udevice_id s35392a_rtc_ids[] = {
+ { .compatible = "sii,s35392a-rtc" },
+ { }
+};
+
+U_BOOT_DRIVER(s35392a_rtc) = {
+ .name = "s35392a_rtc",
+ .id = UCLASS_RTC,
+ .probe = s35392a_probe,
+ .of_match = s35392a_rtc_ids,
+ .ops = &s35392a_rtc_ops,
+};
+
+#endif
diff --git a/drivers/usb/gadget/f_sdp.c b/drivers/usb/gadget/f_sdp.c
index fd3da92..dd7b9cd 100644
--- a/drivers/usb/gadget/f_sdp.c
+++ b/drivers/usb/gadget/f_sdp.c
@@ -32,6 +32,7 @@
#include <spl.h>
#include <image.h>
#include <imximage.h>
+#include <watchdog.h>
#define HID_REPORT_ID_MASK 0x000000ff
@@ -602,6 +603,8 @@
puts("\rCTRL+C - Operation aborted.\n");
return 1;
}
+
+ WATCHDOG_RESET();
usb_gadget_handle_interrupts(controller_index);
}
@@ -712,6 +715,7 @@
return;
}
+ WATCHDOG_RESET();
usb_gadget_handle_interrupts(controller_index);
sdp_handle_in_ep();
diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c
index b6df130..4d5a9a8 100644
--- a/drivers/usb/gadget/storage_common.c
+++ b/drivers/usb/gadget/storage_common.c
@@ -309,7 +309,7 @@
#define FSG_NUM_BUFFERS 2
/* Default size of buffer length. */
-#define FSG_BUFLEN ((u32)16384)
+#define FSG_BUFLEN ((u32)131072)
/* Maximal number of LUNs supported in mass storage function */
#define FSG_MAX_LUNS 8
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 5264475..c79f866 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -47,6 +47,14 @@
help
Enables support for the on-chip xHCI controller on Rockchip SoCs.
+config USB_XHCI_RCAR
+ bool "Renesas RCar USB 3.0 support"
+ default y
+ depends on ARCH_RMOBILE
+ help
+ Choose this option to add support for USB 3.0 driver on Renesas
+ RCar Gen3 SoCs.
+
config USB_XHCI_STI
bool "Support for STMicroelectronics STiH407 family on-chip xHCI USB controller"
depends on ARCH_STI
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 83903fc..79df888 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -59,6 +59,7 @@
obj-$(CONFIG_USB_XHCI_MVEBU) += xhci-mvebu.o
obj-$(CONFIG_USB_XHCI_OMAP) += xhci-omap.o
obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o
+obj-$(CONFIG_USB_XHCI_RCAR) += xhci-rcar.o
obj-$(CONFIG_USB_XHCI_STI) += dwc3-sti-glue.o
# designware
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index be3e842..2582bf3 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -210,9 +210,6 @@
uint32_t cmd, reg;
int max_ports = HCS_N_PORTS(ehci_readl(&ctrl->hccr->cr_hcsparams));
- if (!ctrl || !ctrl->hcor)
- return -EINVAL;
-
cmd = ehci_readl(&ctrl->hcor->or_usbcmd);
/* If not run, directly return */
if (!(cmd & CMD_RUN))
@@ -595,8 +592,9 @@
* dangerous operation, it's responsibility of the calling
* code to make sure enough space is reserved.
*/
- invalidate_dcache_range((unsigned long)buffer,
- ALIGN((unsigned long)buffer + length, ARCH_DMA_MINALIGN));
+ if (buffer != NULL && length > 0)
+ invalidate_dcache_range((unsigned long)buffer,
+ ALIGN((unsigned long)buffer + length, ARCH_DMA_MINALIGN));
/* Check that the TD processing happened */
if (QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_ACTIVE)
@@ -1112,6 +1110,8 @@
rc = ehci_hcd_init(index, init, &ctrl->hccr, &ctrl->hcor);
if (rc)
return rc;
+ if (!ctrl->hccr || !ctrl->hcor)
+ return -1;
if (init == USB_INIT_DEVICE)
goto done;
@@ -1613,11 +1613,14 @@
{
struct usb_bus_priv *priv = dev_get_uclass_priv(dev);
struct ehci_ctrl *ctrl = dev_get_priv(dev);
- int ret;
+ int ret = -1;
debug("%s: dev='%s', ctrl=%p, hccr=%p, hcor=%p, init=%d\n", __func__,
dev->name, ctrl, hccr, hcor, init);
+ if (!ctrl || !hccr || !hcor)
+ goto err;
+
priv->desc_before_addr = true;
ehci_setup_ops(ctrl, ops);
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 7c39bec..18692b7 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -101,11 +101,11 @@
} __attribute__ ((packed));
#if defined CONFIG_EHCI_DESC_BIG_ENDIAN
-#define ehci_readl(x) cpu_to_be32(readl(x))
-#define ehci_writel(a, b) writel(cpu_to_be32(b), a)
+#define ehci_readl(x) be32_to_cpu(__raw_readl(x))
+#define ehci_writel(a, b) __raw_writel(cpu_to_be32(b), a)
#else
-#define ehci_readl(x) cpu_to_le32(readl(x))
-#define ehci_writel(a, b) writel(cpu_to_le32(b), a)
+#define ehci_readl(x) readl(x)
+#define ehci_writel(a, b) writel(b, a)
#endif
#if defined CONFIG_EHCI_MMIO_BIG_ENDIAN
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index 6ef5190..28d2bc8 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -82,6 +82,7 @@
}
} while ((tmp & USBE) != USBE);
r8a66597_bclr(r8a66597, USBE, SYSCFG0);
+#if !defined(CONFIG_RZA_USB)
r8a66597_mdfy(r8a66597, CONFIG_R8A66597_XTAL, XTAL, SYSCFG0);
i = 0;
@@ -94,6 +95,20 @@
return -1;
}
} while ((tmp & SCKE) != SCKE);
+#else
+ /*
+ * RZ/A Only:
+ * Bits XTAL(UCKSEL) and UPLLE in SYSCFG0 for USB0 controls both USB0
+ * and USB1, so we must always set the USB0 register
+ */
+#if (CONFIG_R8A66597_XTAL == 1)
+ setbits(le16, R8A66597_BASE0, XTAL);
+#endif
+ mdelay(1);
+ setbits(le16, R8A66597_BASE0, UPLLE);
+ mdelay(1);
+ r8a66597_bset(r8a66597, SUSPM, SUSPMODE0);
+#endif /* CONFIG_RZA_USB */
#endif /* #if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) */
return 0;
@@ -101,6 +116,7 @@
static void r8a66597_clock_disable(struct r8a66597 *r8a66597)
{
+#if !defined(CONFIG_RZA_USB)
r8a66597_bclr(r8a66597, SCKE, SYSCFG0);
udelay(1);
#if !defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
@@ -108,6 +124,15 @@
r8a66597_bclr(r8a66597, XCKE, SYSCFG0);
r8a66597_bclr(r8a66597, USBE, SYSCFG0);
#endif
+#else
+ r8a66597_bclr(r8a66597, SUSPM, SUSPMODE0);
+
+ clrbits(le16, R8A66597_BASE0, UPLLE);
+ mdelay(1);
+ r8a66597_bclr(r8a66597, USBE, SYSCFG0);
+ mdelay(1);
+
+#endif
}
static void r8a66597_enable_port(struct r8a66597 *r8a66597, int port)
@@ -118,7 +143,9 @@
r8a66597_bset(r8a66597, val, get_syscfg_reg(port));
r8a66597_bset(r8a66597, HSE, get_syscfg_reg(port));
+#if !defined(CONFIG_RZA_USB)
r8a66597_write(r8a66597, BURST | CPU_ADR_RD_WR, get_dmacfg_reg(port));
+#endif
}
static void r8a66597_disable_port(struct r8a66597 *r8a66597, int port)
@@ -148,7 +175,9 @@
if (ret < 0)
return ret;
+#if !defined(CONFIG_RZA_USB)
r8a66597_bset(r8a66597, CONFIG_R8A66597_LDRV & LDRV, PINCFG);
+#endif
r8a66597_bset(r8a66597, USBE, SYSCFG0);
r8a66597_bset(r8a66597, INTL, SOFCFG);
@@ -266,12 +295,30 @@
unsigned long setup_addr = USBREQ;
u16 intsts1;
int timeout = 3000;
+#if defined(CONFIG_RZA_USB)
+ u16 dcpctr;
+ int timeout2 = 10000;
+#endif
u16 devsel = setup->request == USB_REQ_SET_ADDRESS ? 0 : dev->devnum;
r8a66597_write(r8a66597, make_devsel(devsel) |
(8 << dev->maxpacketsize), DCPMAXP);
r8a66597_write(r8a66597, ~(SIGN | SACK), INTSTS1);
+#if defined(CONFIG_RZA_USB)
+ dcpctr = r8a66597_read(r8a66597, DCPCTR);
+ if ((dcpctr & PID) == PID_BUF) {
+ timeout2 = 10000;
+ while (!(dcpctr & BSTS)) {
+ dcpctr = r8a66597_read(r8a66597, DCPCTR);
+ if (timeout2-- < 0) {
+ printf("DCPCTR clear timeout!\n");
+ break;
+ }
+ }
+ }
+#endif
+
for (i = 0; i < 4; i++) {
r8a66597_write(r8a66597, le16_to_cpu(p[i]), setup_addr);
setup_addr += 2;
diff --git a/drivers/usb/host/r8a66597.h b/drivers/usb/host/r8a66597.h
index 67dc3c4..baa1660 100644
--- a/drivers/usb/host/r8a66597.h
+++ b/drivers/usb/host/r8a66597.h
@@ -87,8 +87,10 @@
#define DEVADD8 0xE0
#define DEVADD9 0xE2
#define DEVADDA 0xE4
+#define SUSPMODE0 0x102 /* RZ/A only */
/* System Configuration Control Register */
+#if !defined(CONFIG_RZA_USB)
#define XTAL 0xC000 /* b15-14: Crystal selection */
#define XTAL48 0x8000 /* 48MHz */
#define XTAL24 0x4000 /* 24MHz */
@@ -98,10 +100,17 @@
#define SCKE 0x0400 /* b10: USB clock enable */
#define PCSDIS 0x0200 /* b9: not CS wakeup */
#define LPSME 0x0100 /* b8: Low power sleep mode */
+#endif
#define HSE 0x0080 /* b7: Hi-speed enable */
#define DCFM 0x0040 /* b6: Controller function select */
#define DRPD 0x0020 /* b5: D+/- pull down control */
#define DPRPU 0x0010 /* b4: D+ pull up control */
+#if defined(CONFIG_RZA_USB)
+#define XTAL 0x0004 /* b2: Crystal selection */
+#define XTAL12 0x0004 /* 12MHz */
+#define XTAL48 0x0000 /* 48MHz */
+#define UPLLE 0x0002 /* b1: internal PLL control */
+#endif
#define USBE 0x0001 /* b0: USB module operation enable */
/* System Configuration Status Register */
@@ -173,10 +182,15 @@
#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
#define MBW 0x0800
#else
+#if !defined(CONFIG_RZA_USB)
#define MBW 0x0400 /* b10: Maximum bit width for FIFO access */
+#else
+#define MBW 0x0800 /* b10: Maximum bit width for FIFO access */
+#endif
#endif
#define MBW_8 0x0000 /* 8bit */
#define MBW_16 0x0400 /* 16bit */
+#define MBW_32 0x0800 /* 32bit */
#define BIGEND 0x0100 /* b8: Big endian mode */
#define BYTE_LITTLE 0x0000 /* little dendian */
#define BYTE_BIG 0x0100 /* big endifan */
@@ -379,6 +393,9 @@
#define USBSPD 0x00C0
#define RTPORT 0x0001
+/* Suspend Mode Register */
+#define SUSPM 0x4000 /* b14: Suspend */
+
#define R8A66597_MAX_NUM_PIPE 10
#define R8A66597_BUF_BSIZE 8
#define R8A66597_MAX_DEVICE 10
@@ -419,7 +436,7 @@
int len)
{
int i;
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
+#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) || defined(CONFIG_RZA_USB)
unsigned long fifoaddr = r8a66597->reg + offset;
unsigned long count;
unsigned long *p = buf;
@@ -453,7 +470,7 @@
{
int i;
unsigned long fifoaddr = r8a66597->reg + offset;
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
+#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) || defined(CONFIG_RZA_USB)
unsigned long count;
unsigned char *pb;
unsigned long *p = buf;
diff --git a/drivers/usb/host/xhci-rcar-r8a779x_usb3_v3.h b/drivers/usb/host/xhci-rcar-r8a779x_usb3_v3.h
new file mode 100644
index 0000000..f0f48a3
--- /dev/null
+++ b/drivers/usb/host/xhci-rcar-r8a779x_usb3_v3.h
@@ -0,0 +1,643 @@
+/*
+ * Renesas RCar xHCI controller firmware version 3
+ *
+ * Copyright (c) 2014, Renesas Electronics Corporation
+ * All rights reserved.
+ *
+ * Redistribution and use in binary form, without modification, are permitted
+ * provided that the following conditions are met:
+ *
+ * 1. Redistribution in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 2. The name of Renesas Electronics Corporation may not be used to endorse or
+ * promote products derived from this software without specific prior written
+ * permission.
+ * 3. Reverse engineering, decompilation, or disassembly of this software is
+ * not permitted.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS ELECTRONICS CORPORATION DISCLAIMS
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND
+ * NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL RENESAS ELECTRONICS
+ * CORPORATION BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
+ * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * This file is generated from the firmware blob r8a779x_usb3_v3.dlmem
+ * with associated license file LICENCE.r8a779x_usb3, both taken from
+ * linux-firmware.git [1] as of:
+ *
+ * commit 7c3dfc0bb21bf717dc19a6b677a866aef8b70c35
+ * Author: Yoshihiro Shimoda
+ * Date: Wed Aug 10 19:56:39 2016 +0900
+ *
+ * usb: host: xhci-rcar: update firmware for R-Car H3 and M3-W
+ *
+ * To generate the content of the array below, use ie. the following command:
+ * $ hexdump -v -e '/4 "0x%08x, "' r8a779x_usb3_v3.dlmem | \
+ * sed "s@\(.\{47\}\) @\1\n@g"
+ *
+ * [1] git://git.kernel.org/pub/scm/linux/kernel/git/dwmw2/linux-firmware.git
+ */
+
+#ifndef __FIRMWARE_R8A779X_USB3_V3__
+#define __FIRMWARE_R8A779X_USB3_V3__
+
+static const u32 firmware_r8a779x_usb3_v3[] = {
+ 0xf4c455aa, 0x00d20014, 0x00000000, 0x23dc00e8,
+ 0x00000000, 0x1a5c2007, 0x0001ff63, 0x001eff80,
+ 0x0001ff23, 0x007f1a44, 0xff631a5c, 0xff800001,
+ 0xff2301e2, 0x1a440001, 0x0780007f, 0x06250061,
+ 0x00021e74, 0x40002e05, 0x40002e05, 0x8000f625,
+ 0xdc90062a, 0x556f0000, 0xdd14062a, 0x17040000,
+ 0x5573d612, 0x15ea062a, 0x57650000, 0x16c285d5,
+ 0x060200f0, 0x1deaffe0, 0xe4251724, 0x05d9128d,
+ 0x10001620, 0xe4251764, 0xd6151724, 0x1db1129f,
+ 0x8625ef25, 0x0088063f, 0x32010002, 0x3200007d,
+ 0x0392ffbe, 0x05e251e0, 0xffbe3200, 0x51e003e4,
+ 0x520005ba, 0xef2515f5, 0x063f8625, 0x000200ae,
+ 0x007d3200, 0xd6151724, 0x05b9129d, 0x0d8cffbe,
+ 0xd61417c4, 0xd6179e24, 0x000037d3, 0x4ad0ffbe,
+ 0x06405201, 0x26e6007f, 0x0f9a0631, 0x063f0000,
+ 0x00000e64, 0x0782007f, 0x8f250061, 0xee248019,
+ 0x30030000, 0x00f4063f, 0x00710002, 0x80158725,
+ 0x00d00626, 0x3a010002, 0x0108063f, 0x00700002,
+ 0x0505f01d, 0x7e3d0501, 0x7d030008, 0x80001640,
+ 0x150d1511, 0xf6241509, 0x0509fd00, 0x1503121f,
+ 0x801d7725, 0x00013723, 0x1764121e, 0x063f5c11,
+ 0x0002013e, 0x0642006e, 0x0780007f, 0xe8060061,
+ 0x0d0cffbe, 0x0001577d, 0x007f0640, 0x0d0a07be,
+ 0x17201624, 0x9c00062a, 0x118a03ff, 0x17210764,
+ 0xffec0602, 0xf6240d89, 0x35011720, 0x12820503,
+ 0x1505125d, 0x1724007f, 0x11461721, 0xf6241db2,
+ 0x55021720, 0x12c2100a, 0x3f6211c4, 0x160a172d,
+ 0x15030001, 0x17295724, 0x05bb51e2, 0x17250764,
+ 0x17251724, 0xeeee062a, 0x12c2eeee, 0x576211c4,
+ 0x007f172d, 0x00610780, 0xe8060086, 0x17e0ffbe,
+ 0x5c591724, 0x1281580a, 0xe9e00db1, 0x17240d92,
+ 0x129dd605, 0x172405d9, 0x129dd605, 0x500bfdd1,
+ 0x007f0640, 0x3bd60631, 0x063f0000, 0x00000e64,
+ 0x0780007f, 0x06250061, 0x00021e74, 0x40002e05,
+ 0x40002e05, 0x0dd00744, 0x17441201, 0xef840dd1,
+ 0xea610dd1, 0x0dc205e1, 0x0dd1ea63, 0x15b50df2,
+ 0x0046ff80, 0x1de251e0, 0x14b6ff80, 0xff800df5,
+ 0x0dc50116, 0x023aff80, 0xff8005b5, 0xff800360,
+ 0x05c514be, 0xffbe3201, 0x3f841702, 0x39fd0dd1,
+ 0x0622ddf2, 0xaaaa1100, 0x32013902, 0x16d8ffbe,
+ 0x0640d5f5, 0x0780007f, 0xffbe0061, 0x51e00398,
+ 0x320105ca, 0x00eeffbe, 0x1c3affbe, 0x0386ffbe,
+ 0x05ca51e0, 0xffbe3201, 0xff8000dc, 0xff800438,
+ 0x321f04a2, 0xfebcffbf, 0x036affbe, 0x05ca51e0,
+ 0xffbe3201, 0x172400c0, 0x1282d60d, 0xffbe15e9,
+ 0xf62442ce, 0x1500d600, 0xf1ff5620, 0x1501114a,
+ 0xd6051724, 0x05d9128d, 0xd6019e24, 0x000087d3,
+ 0xd6b91724, 0x08f01764, 0x032affbe, 0x05ca51e0,
+ 0xffbe3201, 0xef250080, 0x063f8625, 0x000202fc,
+ 0x007d3201, 0x030effbe, 0x05ca51e0, 0xffbe3201,
+ 0xff800064, 0x062604d6, 0x000224ac, 0x1de8ffbe,
+ 0x15f251e0, 0x02eeffbe, 0x05ca51e0, 0xffbe3201,
+ 0xef250044, 0x063f8625, 0x00020338, 0x007d3200,
+ 0x016087e0, 0xffbe3201, 0x52011578, 0x0dd05744,
+ 0x007f0640, 0x30e10780, 0xd6051724, 0x128dd200,
+ 0x172415a9, 0x1282d60d, 0x172405d1, 0x1285d605,
+ 0x9e240da1, 0x17d3d600, 0xffbe0000, 0xff80440a,
+ 0x6dd500e2, 0x481affbe, 0xd7e91724, 0x15d11284,
+ 0xd60d1724, 0x15911282, 0x1e26ffbe, 0xd6011724,
+ 0x05b91298, 0xd602bfc4, 0xd6051724, 0x05d9129b,
+ 0x04001640, 0xd6051764, 0xd7e91724, 0x05a91284,
+ 0x1724d201, 0x128dd605, 0x17240d91, 0x1282d60d,
+ 0xd1e005d9, 0xffbe05ba, 0xef251eda, 0x063f82b1,
+ 0x000203de, 0x1724007d, 0x1282d60d, 0xd1e035a9,
+ 0x172435ea, 0x1281d6b9, 0x178425f9, 0x11e008f3,
+ 0xea0125ba, 0x80001625, 0x00c4de02, 0x301d15d5,
+ 0xffbe0086, 0x51e0d8a6, 0x372a0de2, 0xe73b0001,
+ 0x063f0001, 0x00020422, 0x51e0007c, 0x87c405ca,
+ 0x0da5d6b8, 0x1724ea41, 0x52025c59, 0x05a91281,
+ 0xe9ea5201, 0x1201e5d7, 0x08f91744, 0xd60c8fc4,
+ 0x05dad1e0, 0x205affbe, 0x03caff80, 0x30ff0640,
+ 0x00610780, 0x8625ef25, 0x046a063f, 0x32010002,
+ 0xffbe007d, 0xffbe1572, 0x064015de, 0x0780007f,
+ 0x17a40061, 0x12610dd1, 0x178415ba, 0x11e0e459,
+ 0xffbe0df2, 0xef2542f2, 0x063f806d, 0x0002049a,
+ 0x9e24007d, 0x1fd3d60f, 0x07440000, 0x17240dd1,
+ 0x1285d605, 0x27c405e9, 0xff80d6b2, 0x45d50092,
+ 0x82b9ef25, 0x04c4063f, 0x007d0002, 0x05c251e0,
+ 0x181effbe, 0x17243da5, 0x1282e421, 0x32000dd9,
+ 0x13deffbe, 0x82c1ef25, 0x04e8063f, 0x007d0002,
+ 0x0dd00744, 0x17242da5, 0x1288e421, 0xffbe05b9,
+ 0x17242250, 0x1289e425, 0xffbe05b9, 0x1724224c,
+ 0x128ae425, 0xffbe05b9, 0xffbe24d6, 0x51e000f8,
+ 0x320105ca, 0xfe4effbd, 0xe4211724, 0x0dd91281,
+ 0x0dd117a4, 0x05da1261, 0xd60f9e24, 0x00001fd3,
+ 0xd60c9fc4, 0x0026ff80, 0x007f0640, 0x00610780,
+ 0x8625ef25, 0x0556063f, 0x32000002, 0xffbe007d,
+ 0xffbe1562, 0x0640166e, 0x0782007f, 0xef250061,
+ 0x063f8019, 0x00020574, 0x007d3003, 0x8625ef25,
+ 0x0582063f, 0x32000002, 0xffbe007d, 0xffbe168c,
+ 0x372316b4, 0xef250001, 0x063f801d, 0x0002059a,
+ 0xffbe007d, 0x06421724, 0x0780007f, 0x172400e1,
+ 0x1281e421, 0x17240d81, 0x1284e439, 0xff8005c1,
+ 0x45c50090, 0x82b9ef25, 0x05c8063f, 0x007d0002,
+ 0x05c251e0, 0x188affbe, 0xef253d95, 0x063f82d5,
+ 0x000205e0, 0x007d3200, 0x8311ef25, 0x05ec063f,
+ 0x007d0002, 0x08f717a4, 0x05ba11e0, 0x0450ff80,
+ 0x02bcff80, 0x08f71784, 0x25821262, 0x08f717a4,
+ 0x1dca11e0, 0x456cffbe, 0xffbee00a, 0xef25313e,
+ 0x063f82e1, 0x00020622, 0xef25007d, 0x063f82f1,
+ 0x0002062e, 0xffbe007d, 0xe1e0327a, 0xffbe05f2,
+ 0x51e04542, 0xffbe05ba, 0x06402cf4, 0x078200ff,
+ 0xef250061, 0x063f8019, 0x00020658, 0x007d3003,
+ 0x8625ef25, 0x0666063f, 0x32010002, 0x1724007d,
+ 0x1281ea01, 0x07c405b1, 0xffbeea00, 0xf62416da,
+ 0x1558d600, 0x00105640, 0x1559110a, 0x171affbe,
+ 0x00013723, 0x801def25, 0x0698063f, 0x007d0002,
+ 0x85adef25, 0x06a4063f, 0x007d0002, 0x8019ef25,
+ 0x06b2063f, 0x30030002, 0xffbe007d, 0x3723174e,
+ 0xef250001, 0x063f801d, 0x000206c6, 0x0642007d,
+ 0x0780007f, 0x121f0061, 0x5c00f624, 0x15091507,
+ 0x150d150b, 0xfd00f624, 0x15031505, 0xe900f624,
+ 0x15071505, 0xd600f624, 0x15061505, 0x0d911282,
+ 0x1764121f, 0x0000d605, 0x00000000, 0x00000000,
+ 0x8001ef25, 0x0714063f, 0x007d0002, 0x8015ef25,
+ 0x01ec0626, 0x3a020002, 0x0728063f, 0x007d0002,
+ 0x8021ef25, 0x0734063f, 0x007d0002, 0x007f0640,
+ 0x00210780, 0xfbccffbd, 0x07d01620, 0x0fb8f624,
+ 0x56801480, 0x5481ffff, 0x14835482, 0x001c1620,
+ 0x0818f624, 0x520413b0, 0x120353b1, 0x13b313b2,
+ 0x5bb45a01, 0x5c8153b5, 0x00c85620, 0x5e205482,
+ 0x5c830190, 0x00645e20, 0x54855c84, 0x04870486,
+ 0x00fa5620, 0x5e205488, 0x5c89012c, 0x5e20548a,
+ 0x5c8b0014, 0x03c05620, 0x5205548c, 0x539b539a,
+ 0x639c6206, 0x6b9d6a09, 0x539f5b9e, 0x63a153a0,
+ 0x5ba25a0a, 0x00105e20, 0x5a025ba3, 0x5ba55ba4,
+ 0x13a713a6, 0x5ba913a8, 0x13ab5baa, 0x13ad13ac,
+ 0x5baf53ae, 0x003f0640, 0x00610780, 0xe000f624,
+ 0x96201544, 0x9e24f0ff, 0x1152fb75, 0x03001682,
+ 0xafd31545, 0xffbe0000, 0x27c41806, 0xef25d6b2,
+ 0x063f834d, 0x00020812, 0xffbe007d, 0x064018a0,
+ 0x0782007f, 0xef250061, 0x063f8019, 0x0002082c,
+ 0x007d3003, 0x08f317a4, 0x1d8a1261, 0xd6051724,
+ 0x15c9129c, 0x08001640, 0xd6051764, 0x00001200,
+ 0x00000000, 0x00000000, 0x12671241, 0x1724fd96,
+ 0x129cd605, 0x074405b1, 0xffbe08f3, 0x51e02500,
+ 0xffbe1dc2, 0x37232554, 0xef250001, 0x063f801d,
+ 0x0002087e, 0x1724007d, 0x5640d605, 0x114a0300,
+ 0xffbe15c2, 0x17241a1e, 0x1282fd05, 0x17240de1,
+ 0x1285d605, 0x0d95fd91, 0x00013723, 0x801def25,
+ 0x08b0063f, 0x007d0002, 0x007f0642, 0x00610782,
+ 0x8019ef25, 0x08c6063f, 0x30030002, 0xffbe007d,
+ 0x51e02650, 0xffbe05da, 0xffbe26d6, 0x37232710,
+ 0xef250001, 0x063f801d, 0x000208e6, 0x0642007d,
+ 0x0780007f, 0xffbe0021, 0x51e02906, 0xffbe05b2,
+ 0x06402acc, 0x0780003f, 0xef250061, 0x063f8631,
+ 0x0002090e, 0x51e0007d, 0xffbe05ba, 0x0640325c,
+ 0x0780007f, 0xd20070e1, 0x17441201, 0x16250855,
+ 0xce028000, 0xde020330, 0x17240334, 0xe802eab5,
+ 0xea9aeaca, 0x003f16c2, 0x35c2e9e2, 0x001f16dd,
+ 0x000c36e2, 0x170631c4, 0x362694b4, 0x12d894b0,
+ 0x1261129c, 0x05d21df1, 0x0da11263, 0x1da515c2,
+ 0x0001e739, 0x0974063f, 0x007c0002, 0xe73b15d5,
+ 0x063f0001, 0x00020982, 0x06aa007c, 0x0dc2ffff,
+ 0x0da5d201, 0x0009e73b, 0x0998063f, 0x007c0002,
+ 0xff8005b5, 0xea41003e, 0x003f56dd, 0xeab65744,
+ 0x1640c5d5, 0xf6240001, 0x1503ea00, 0xe802155a,
+ 0xea9aeaca, 0x003f16c2, 0xbd8ae9e2, 0x05fad261,
+ 0x8339ef25, 0x09d4063f, 0x007d0002, 0x70ff0640,
+ 0x00610780, 0x5864f006, 0x5ad81303, 0x12d85a9c,
+ 0x0dba1299, 0x80011724, 0x30005640, 0x25d2114a,
+ 0x80011724, 0x129a12ca, 0x52c25002, 0x572a51c4,
+ 0x66408001, 0x514c8000, 0x060b1d82, 0x15d1fff0,
+ 0x57eb5201, 0x5f2400c0, 0x514be435, 0x38020de2,
+ 0x000c16e2, 0x854def25, 0x47e211c4, 0x32440fc9,
+ 0x0a40063f, 0x007d0002, 0x007f0640, 0x00e10780,
+ 0x2200063c, 0xf624aaaa, 0xe86000a4, 0xea610384,
+ 0x0d8205e1, 0x0d91ea63, 0x0dd50db2, 0x4292ffbe,
+ 0xff800dd5, 0x0da50034, 0x0076ff80, 0xffbe05f5,
+ 0x05c542de, 0xffbe3202, 0x3f840ed2, 0x39fd00a5,
+ 0x391c05d2, 0xffbe3202, 0x17840eae, 0x11e000a9,
+ 0x0640ddba, 0x078000ff, 0xefa40061, 0xea6100a5,
+ 0x159205e1, 0x05e1ea63, 0x0da50d82, 0x430effbe,
+ 0xffbe0da5, 0x05f543bc, 0x4406ffbe, 0x320305c5,
+ 0x0e88ffbe, 0x00a53fa4, 0x0d8239fd, 0x33000622,
+ 0x3902aaaa, 0xffbe3204, 0x06400e5e, 0x0780007f,
+ 0xef8400e1, 0xe7a400a7, 0x101d00a7, 0xffed0602,
+ 0x00424de1, 0x00160013, 0x001c0019, 0x0022001f,
+ 0x00280025, 0x002e002b, 0x00340031, 0x003a0037,
+ 0x0040003d, 0x00490043, 0xffbe0046, 0x3da543ea,
+ 0x4488ffbe, 0xffbe35f5, 0x35c5448a, 0x0098ff80,
+ 0xff803595, 0x2de500d4, 0x0114ff80, 0xff802db5,
+ 0x2d8501a8, 0x01e0ff80, 0xff8025d5, 0x25a502fe,
+ 0x05b0ff80, 0xff801df5, 0x1dc505d4, 0x694effbe,
+ 0xffbe1d95, 0x15e56a22, 0x0604ff80, 0xff8015b5,
+ 0x1585061e, 0x6c9effbe, 0xffbe0dd5, 0x0da56cea,
+ 0x6d96ffbe, 0xffbe05f5, 0x05c56e5e, 0xffbe3204,
+ 0x3f840dba, 0x39fd00a7, 0x06220d82, 0xaaaa4400,
+ 0x32083902, 0x0d90ffbe, 0x00a73fa4, 0x0d9239fc,
+ 0x55000622, 0x3902aaaa, 0x00103620, 0x0d78ffbe,
+ 0x00ff0640, 0x00a717a4, 0x1dab1269, 0x000a0042,
+ 0x001b000c, 0x0010000e, 0x0012001b, 0x001b0014,
+ 0x07be0016, 0x07be4470, 0x07be4522, 0x07be458e,
+ 0x07be45ae, 0x07be461a, 0x07be463a, 0x32054696,
+ 0x0d4807be, 0x17a4007f, 0x126900a7, 0x00421dcb,
+ 0x001d000a, 0x0010000c, 0x0016000e, 0x00140012,
+ 0x0018001d, 0x46fc07be, 0x47d607be, 0x494407be,
+ 0x487207be, 0x4a3607be, 0x4a8a07be, 0x497a07be,
+ 0x4b7407be, 0x07be3206, 0x007f0d02, 0x00a717a4,
+ 0xffe70602, 0x004245d1, 0x00460019, 0x001d001b,
+ 0x0021001f, 0x00250023, 0x00290027, 0x002d002b,
+ 0x0031002f, 0x00350033, 0x00370046, 0x003b0039,
+ 0x0046003d, 0x0046003f, 0x07be0041, 0x07be4b80,
+ 0x07be4c5e, 0x07be4d0c, 0x07be4d72, 0x07be4dd2,
+ 0x07be4e8c, 0x07be4f12, 0x07be504c, 0x07be50f6,
+ 0x07be512c, 0x07be51c6, 0x07be5212, 0x07be5320,
+ 0x07be5462, 0x07be54d0, 0x07be55fa, 0x07be562e,
+ 0x07be5698, 0x07be56d0, 0x07be582c, 0x3207599c,
+ 0x0c6807be, 0x17a4007f, 0x126900a7, 0x00421d8b,
+ 0x0019000a, 0x000e000c, 0x00100019, 0x00120019,
+ 0x00140019, 0x5a3e07be, 0x5abc07be, 0x5b5407be,
+ 0x5bba07be, 0x5c2207be, 0x5d3c07be, 0x07be3208,
+ 0x007f0c2a, 0x00a717a4, 0x0d811261, 0x12631582,
+ 0x0dd205f1, 0x05e21264, 0x07be05f5, 0x07805d24,
+ 0x07be0010, 0x32095f2c, 0x0c0007be, 0x0786007f,
+ 0x378470e1, 0x16240811, 0xe8068284, 0xe9c2eac5,
+ 0xe4391724, 0xd200e200, 0x07a4de24, 0x05e91283,
+ 0x07b337a4, 0x6cb6ffbe, 0xffbe65e5, 0x171da9f6,
+ 0x12d90001, 0x1264129d, 0xf7dd0d9a, 0x05e20006,
+ 0x0007e79d, 0xe2d8d201, 0x17bbe29f, 0x3784000d,
+ 0xcf250811, 0x063f83cd, 0x00020dbc, 0x129f12de,
+ 0x00793802, 0xf6241201, 0x139c00ac, 0xd1e0039d,
+ 0xe1e02582, 0x171d0dda, 0xf6240015, 0x12ddeb54,
+ 0x12c3129e, 0x121ff1c2, 0x15031501, 0x120115a5,
+ 0x00acf624, 0x571d139c, 0x56ca000b, 0x5241001f,
+ 0x00c017ea, 0x139d125f, 0x07b4f624, 0x05030501,
+ 0x0e5497c4, 0x0e540fc4, 0x000d3f3b, 0x0e5407c4,
+ 0x17441203, 0x300700a7, 0x3acb3298, 0x3ac63a9b,
+ 0x08e0ffbe, 0x00ac3624, 0x00401620, 0x1501f003,
+ 0x17250503, 0x3e24839d, 0x400a0e54, 0x1505480b,
+ 0x05ccffbe, 0x70ff0646, 0x00210780, 0x00a717a4,
+ 0x0d911261, 0x126415f2, 0x15f22591, 0x1d811266,
+ 0x1d950de2, 0x003aff80, 0xfd191724, 0x129512c5,
+ 0x16c21242, 0x17440003, 0x15851714, 0x0132ff80,
+ 0xffbe0dd5, 0x0da55f18, 0x01a6ff80, 0xffbe05f5,
+ 0x05c560f8, 0xffbe320a, 0x06400ab2, 0x0780003f,
+ 0x5f2400e1, 0xee2407b1, 0x662407a4, 0x100b8000,
+ 0x50021298, 0x51cc52c2, 0x0da211e0, 0xffdf0602,
+ 0x172a05f1, 0x56400001, 0x51428000, 0x320b05ba,
+ 0x56405dc5, 0x51423000, 0x36c255e2, 0x100b00ff,
+ 0xe72512cb, 0x129b841d, 0x063f3802, 0x00020efa,
+ 0x5744007c, 0x008a0810, 0x060d680a, 0x05baff01,
+ 0x45b53205, 0x100d6ac5, 0x172211c4, 0x16c28299,
+ 0x12610007, 0x12633df2, 0x100a35ea, 0x66c21285,
+ 0x16ca0003, 0x5a01001f, 0x00c05fe2, 0x17196764,
+ 0x100c62c2, 0x172211c4, 0x5f64ea49, 0x114b171d,
+ 0x17241dea, 0x12c5fd19, 0x12421295, 0x000376c2,
+ 0xfd191724, 0x129512c5, 0x000316c2, 0xfd9a11ee,
+ 0x172d69c4, 0x16c28299, 0x12610007, 0x126315b2,
+ 0x61c40daa, 0xea49172c, 0x05d25942, 0x17441206,
+ 0x15c500a7, 0x00133620, 0x000f3fbd, 0x6b0effbe,
+ 0xef250dd5, 0x063f8625, 0x00020fa8, 0x007d3201,
+ 0xf6241201, 0x138400a4, 0x06401383, 0x172400ff,
+ 0x5e24e421, 0x128107a4, 0x172405d9, 0x1283e439,
+ 0x37ab05d9, 0x07be000f, 0x17846a64, 0x12c50811,
+ 0x172211c4, 0x16c28299, 0x12630007, 0xf62405f2,
+ 0x038300a4, 0x13841201, 0x172425a5, 0x57241719,
+ 0x12c2171d, 0x172211c4, 0x5142ea49, 0xfd191724,
+ 0x129512c5, 0x05f251e0, 0x16c21242, 0x17440003,
+ 0x0dd51714, 0x17155784, 0x000316c2, 0x05fa11ea,
+ 0x000f3fab, 0x00133620, 0x6a7207be, 0x0788007f,
+ 0x67240021, 0x62d2eab1, 0x160c629a, 0x1261ffff,
+ 0x126315b3, 0x12691592, 0x126b0df2, 0x126d0dd2,
+ 0x06020db2, 0x0d82ffef, 0xffed1602, 0x05c31261,
+ 0x12611259, 0x57844d9b, 0x5e240811, 0x100a8284,
+ 0x11cb12c5, 0x05b26261, 0x0dba6262, 0x51c452c2,
+ 0x8085572a, 0x05d9528e, 0x07635200, 0x05f50001,
+ 0xeb6d5724, 0x00015763, 0xeb715724, 0x5503f003,
+ 0x1b005640, 0x05075505, 0x56ca530d, 0x568a0003,
+ 0x538d0080, 0x57225b0e, 0x5ecb0001, 0x6eca00e0,
+ 0x590d001f, 0x52d45b8e, 0x538f5299, 0xffff560c,
+ 0x05e35261, 0x05c25269, 0xffef060a, 0x3f8205ea,
+ 0x3ec7000d, 0x05d5000f, 0xeab13f24, 0x3a9c3acc,
+ 0xffbe3003, 0x12050436, 0x00a71744, 0x003f0648,
+ 0x00a717a4, 0x0d811261, 0x12631582, 0x0dd205f1,
+ 0x05e21264, 0x07be05f5, 0x07be5eac, 0x07be5fc4,
+ 0x320b6022, 0x082407be, 0x17a4007f, 0x126900a7,
+ 0x00421dab, 0x000c000a, 0x000e001b, 0x001b0010,
+ 0x00140012, 0x0016001b, 0x603607be, 0x613a07be,
+ 0x61a607be, 0x61c607be, 0x623207be, 0x625207be,
+ 0x62d007be, 0x07be320c, 0x007f07e2, 0x00a717a4,
+ 0x05d11261, 0x12620db2, 0x05d505c2, 0x643807be,
+ 0x655407be, 0x07be320d, 0x007f07c2, 0x00a717a4,
+ 0x05d11261, 0x126205e2, 0x05f505e2, 0x654007be,
+ 0x65fe07be, 0x666607be, 0x07be320e, 0x0780079e,
+ 0x008610e1, 0xeac5e806, 0x077de9c4, 0x077d8289,
+ 0x077d828d, 0x077d8291, 0x077d8295, 0x077d8299,
+ 0x077d829d, 0xe00682a1, 0xd8070087, 0x6b06ffbe,
+ 0x8285171d, 0x301c381b, 0x129d12d9, 0x05ca1264,
+ 0x6c54ffbe, 0xffbe05b5, 0x06406c86, 0x078010ff,
+ 0xd80770e1, 0xd008009b, 0xc809009a, 0x009ce006,
+ 0xeac5e81c, 0x82841624, 0x301de9c2, 0x46203a00,
+ 0xffbe0020, 0x301c062a, 0x401a381b, 0xffbe4819,
+ 0x301c6cba, 0x0001171d, 0x401a381b, 0x12d94819,
+ 0x1264129d, 0xffbe158a, 0xf7dd6e9e, 0x48190006,
+ 0x381b401a, 0x05ca301c, 0x6f1affbe, 0xffbe05e5,
+ 0x05b56f4e, 0x6f54ffbe, 0x70ff0640, 0x10e10780,
+ 0xe8060086, 0xe9c4eac5, 0x0087e006, 0xffbed807,
+ 0x171d7016, 0xee3d8285, 0x301c8284, 0x12d9381b,
+ 0x1264129d, 0xffbe0dea, 0xf7dd7012, 0x381b0006,
+ 0x05ca301c, 0x7064ffbe, 0xffbe05e5, 0x05b570c6,
+ 0x70f8ffbe, 0x10ff0640, 0x00610780, 0xe8060086,
+ 0x1624eac4, 0xe9c205a4, 0x00051728, 0x008b5807,
+ 0x30025002, 0x529852d0, 0x00013e0a, 0x32900087,
+ 0x2da25a61, 0x1dc25a63, 0x35aa5a64, 0x129d12da,
+ 0x05e21261, 0x0d821263, 0x0da21265, 0x30080dd5,
+ 0x8512ffbe, 0x300825f5, 0x85f4ffbe, 0x300825b5,
+ 0x86d6ffbe, 0x30081df5, 0x879cffbe, 0x12da1db5,
+ 0x1261129d, 0x126505b2, 0xffbe05ca, 0x15a58858,
+ 0x8862ffbe, 0x12da0df5, 0x1261129d, 0x126505b2,
+ 0xffbe05ca, 0x05e58860, 0x8886ffbe, 0xffbe05b5,
+ 0x577d88ac, 0x06400001, 0x0780007f, 0x00860061,
+ 0xeac4e806, 0x05a41624, 0xefc7e9c2, 0x30070004,
+ 0xffbe05ca, 0x05b588c4, 0x8976ffbe, 0x0005577d,
+ 0x007f0640, 0xffe1078a, 0x00bc3620, 0x8cbcffbe,
+ 0xffbea00a, 0x57638cbe, 0xffbe0002, 0x57638cb6,
+ 0xffbe0004, 0x57638cb4, 0x36200006, 0xffbe00bc,
+ 0x57638cae, 0x36200008, 0xffbe00bc, 0x57638caa,
+ 0xffbe000a, 0x57638cdc, 0xffbe000c, 0x57638cd4,
+ 0xffbe000e, 0x57638cd2, 0x36200010, 0xffbe00bc,
+ 0x57638ccc, 0xaa000012, 0xb200ba00, 0xe815ca00,
+ 0x1624eac3, 0xe9c204a4, 0xd860f01d, 0xe063c067,
+ 0x0220dff4, 0xffbe3018, 0xf01d8c42, 0xe7ea1061,
+ 0x57e30220, 0x5fe30003, 0x17ea0005, 0x50650220,
+ 0x57ebe1db, 0x11dc0220, 0x5fe351c2, 0x10640007,
+ 0x022017eb, 0x11cad862, 0x000957e3, 0xdfeae066,
+ 0x30180220, 0xffbed9c2, 0xe7ea8c16, 0xf01d0220,
+ 0xd060e1db, 0x000b17e3, 0xd8633018, 0x0220d7e2,
+ 0x8c04ffbe, 0x1061f01d, 0x0220dfea, 0x000d57e3,
+ 0x000f5fe3, 0x022017ea, 0xd9da5065, 0x022057eb,
+ 0x51c211db, 0x00115fe3, 0x17eb1064, 0xd0620220,
+ 0x57e311ca, 0xd8660013, 0x0220d7ea, 0xd1c23018,
+ 0x8c0affbe, 0x0220dfea, 0xb9fcd9da, 0xb81c05a9,
+ 0x05a9b1fb, 0xee1db01b, 0xca410040, 0xca640099,
+ 0x10159dc1, 0x500212c2, 0xbf6a51c4, 0x11c403bd,
+ 0x03ddb762, 0x0095aa41, 0x85f1aa68, 0xffff064a,
+ 0x00210780, 0x00041706, 0x12da0087, 0x16c2129d,
+ 0x3a610003, 0x2dc255b1, 0x3dd13a63, 0x3a6415e2,
+ 0x12614dda, 0x0de205e1, 0x05e11263, 0x45e50d82,
+ 0xa402ffbe, 0xffbe45c5, 0x4595a464, 0xa546ffbe,
+ 0xffbe3de5, 0x3db5a602, 0x05e11261, 0x12630de2,
+ 0x0d8205e1, 0xffbe35b5, 0x3595a3b8, 0xa41affbe,
+ 0xffbe2de5, 0x2db5a4d2, 0xa58effbe, 0x12612d85,
+ 0x0de205e1, 0x05e11263, 0x25850d82, 0xa35cffbe,
+ 0xffbe1de5, 0x1db5a3d0, 0xa47cffbe, 0xffbe1d85,
+ 0x15d5a538, 0x05e11261, 0x12630de2, 0x0d8205e1,
+ 0xffbe0dd5, 0x0db5a31c, 0xa3a6ffbe, 0xffbe0d85,
+ 0x05d5a428, 0xa50effbe, 0x520105a5, 0x003f0640,
+ 0x00210780, 0x0fc11784, 0x05f211e0, 0x0fb8f624,
+ 0x03883069, 0xabf4ffbe, 0xfd111724, 0x05b11284,
+ 0xfd081fc4, 0x003f0640, 0xf0e10780, 0x8625ef25,
+ 0x3201d200, 0x15e4063f, 0x007d0002, 0x5c591724,
+ 0x1281c00a, 0x0000e7e9, 0x80001625, 0x00c0ce02,
+ 0x301c1db5, 0xffbe0086, 0xe80ac6b2, 0x15b2e9e0,
+ 0xff80301d, 0x373d00a0, 0xdf390001, 0x063f0001,
+ 0x0002161e, 0x5261007b, 0xcfdd05c2, 0x05b20003,
+ 0x0d95d201, 0x1724e241, 0x12815c59, 0x000017e9,
+ 0xe587e1e2, 0x8625ef25, 0x164a063f, 0x30180002,
+ 0x501a007d, 0xf0ff0640, 0x10e10780, 0x5c591724,
+ 0x1281ea02, 0xea0105a9, 0x80001625, 0x00c0de02,
+ 0x301d15e5, 0xffbe0086, 0xe00ac642, 0x0de2e1e0,
+ 0xff80301c, 0x373c0030, 0xe73b0001, 0x063f0001,
+ 0x0002168e, 0x5261007c, 0xea410db2, 0x5c591724,
+ 0x12815202, 0x520105a9, 0xe5c7e9ea, 0x06405200,
+ 0x1a5c10ff, 0x00011726, 0x0001062a, 0x17630012,
+ 0x12cb0001, 0x114a128b, 0x00125640, 0x0dea11ea,
+ 0x17461202, 0x00000002, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x1a440000, 0xf624007f,
+ 0x03800d24, 0x00dc1620, 0x12021381, 0x03831382,
+ 0x0d290764, 0x12011388, 0x007f1389, 0x00e10780,
+ 0x09e1ef84, 0x09e1e7a4, 0x1267101d, 0x0042259b,
+ 0x000b0008, 0x0011000e, 0x00170014, 0x001d001a,
+ 0x006eff80, 0xff8015d5, 0x15a501c2, 0xd03cffbe,
+ 0xffbe0df5, 0x0dc5d088, 0xd0f8ffbe, 0xff800d95,
+ 0x05e501f8, 0xd1f6ffbe, 0xffbe05b5, 0x3f84d2f4,
+ 0x39fd09e1, 0x06220d92, 0xaaaa6600, 0x36203902,
+ 0xffbe0020, 0x3fa401d2, 0x39fc09e1, 0x06220d92,
+ 0xaaaa7700, 0x36203902, 0xffbe0040, 0x178401ba,
+ 0x11e009e1, 0xff8005b2, 0x0640066c, 0x078000ff,
+ 0x17a40021, 0x126109e1, 0x05f205d1, 0x0d821263,
+ 0xff800d95, 0x05e5002c, 0x0056ff80, 0xffbe05b5,
+ 0xffbecdd4, 0x5784d2a8, 0x17a409e1, 0x51e209e3,
+ 0xf62405d2, 0x13a409bc, 0x064003a5, 0x0780003f,
+ 0xffbe0061, 0x1724cc88, 0x12815c59, 0xef250df1,
+ 0x063f8625, 0x000217f4, 0x007d3201, 0x8625ef25,
+ 0x1802063f, 0x300a0002, 0x0640007d, 0x0788007f,
+ 0x17240061, 0x12815c59, 0x17246de1, 0x5640c0a1,
+ 0x114a8000, 0x17240d9a, 0x129cd621, 0x962405d1,
+ 0x1fd2d623, 0x17240000, 0x5640c0a1, 0x114a8000,
+ 0x12035da2, 0xc000f624, 0x15501531, 0x55b2114a,
+ 0x8625ef25, 0x1856063f, 0x32010002, 0x1724007d,
+ 0x128efb75, 0x178415c9, 0x06025c61, 0xfdc2ffdf,
+ 0x5c611784, 0xffde0602, 0x172405ea, 0x06c2fb9d,
+ 0xf5fa000c, 0xfb759624, 0x0000afd2, 0xc0648fc4,
+ 0xd6239624, 0x00009fd2, 0x0dd11784, 0x05fa1262,
+ 0x3a013200, 0x4a024200, 0x3224ffbe, 0x17441202,
+ 0x172409e1, 0x1282c061, 0x074405c9, 0x1db509e1,
+ 0xc000f624, 0x35583d5a, 0xffbd4210, 0x1624fdf4,
+ 0xf00308fc, 0x16201501, 0x150300c0, 0x20001620,
+ 0x17251505, 0x362481ad, 0x400a09bc, 0x1507480b,
+ 0xfad6ffbd, 0x007f0648, 0x00210780, 0x09e117a4,
+ 0x05e211e0, 0x05f21264, 0x0d821265, 0xffbe0d95,
+ 0x05e5ccac, 0xccf2ffbe, 0xffbe05b5, 0xffbecd76,
+ 0x5784d14c, 0x17a409e1, 0x51e209e3, 0x12640db2,
+ 0x9e2405da, 0x07d3c049, 0xf6240000, 0x13a409bc,
+ 0x064003a5, 0x0780003f, 0xffbe0061, 0x1784cf60,
+ 0x126609e1, 0xef250dda, 0x063f824d, 0x0002195a,
+ 0xef25007d, 0x063f8251, 0x00021966, 0x0640007d,
+ 0x0780007f, 0xffbe0021, 0x1784d2a0, 0x12610a15,
+ 0x05d20de1, 0x05e11263, 0x0d950d82, 0xd30cffbe,
+ 0xffbe05e5, 0x05b5d3da, 0xd4b4ffbe, 0x003f0640,
+ 0x00210780, 0x0a0d1724, 0x00ff062b, 0x5200ffff,
+ 0x1262114b, 0x96400da2, 0x11f20030, 0x96400d92,
+ 0x11f20031, 0x0d950d82, 0xd518ffbe, 0xffbe05e5,
+ 0x05b5d5f8, 0xd60effbe, 0x003f0640, 0x00210780,
+ 0x0a0d1724, 0x5ec25200, 0x060b00ff, 0x15eaff80,
+ 0x12611298, 0x05f215b1, 0x0d811263, 0x126f0da2,
+ 0x0dc50db2, 0xd63cffbe, 0xffbe0d95, 0x05e5d64c,
+ 0xd65cffbe, 0xffbe05b5, 0x0640d662, 0x17a4003f,
+ 0x12610a0f, 0x05f21581, 0x05f11263, 0x126f0d82,
+ 0x0d950d82, 0xd65a07be, 0xd68007be, 0xd6a607be,
+ 0xd6c007be, 0x0780007f, 0x17840021, 0x52000a0d,
+ 0xff800602, 0x05e20df9, 0xff7e0602, 0x0d8205e9,
+ 0xffbe0d95, 0x05e5d6f6, 0xd706ffbe, 0xffbe05b5,
+ 0x0640d720, 0x1784003f, 0x06020a0d, 0x05baff80,
+ 0xd74607be, 0xff7f0602, 0x07be05ba, 0x07bed768,
+ 0x0780d76e, 0x17240021, 0x062b0a0d, 0xffff00ff,
+ 0x114b5200, 0x0da21262, 0x00309640, 0x0d9211f2,
+ 0x00319640, 0x0d8211f2, 0xffbe0d95, 0x05e5d822,
+ 0xd8d4ffbe, 0xffbe05b5, 0x0640d8ec, 0x1784003f,
+ 0x520109e1, 0x05ba1266, 0xd91a07be, 0x1784007f,
+ 0x520109e1, 0x05ba1266, 0xd98007be, 0x0780007f,
+ 0xee240061, 0x301dc500, 0xd9d6ffbe, 0x0009361d,
+ 0xd9e8ffbe, 0x0012361d, 0xffbe3a00, 0x361dda00,
+ 0x3a000019, 0xda2cffbe, 0x001f361d, 0xffbe3a01,
+ 0x361dd9ec, 0x3a010026, 0xda18ffbe, 0x007f0640,
+ 0x00610780, 0xc500ee24, 0xffbe301d, 0x361dda12,
+ 0xffbe0005, 0x0640da1a, 0x0780007f, 0x170400e1,
+ 0x16c2097c, 0x12610007, 0x126305b2, 0xffbe05ba,
+ 0x1724db90, 0x1285c0a1, 0x063c2dd1, 0xaaaa8800,
+ 0x0b71efa4, 0x0b700744, 0x0d91ea61, 0xea630db2,
+ 0xea650dc2, 0xea660dd2, 0x0df50de2, 0xdce8ffbe,
+ 0xffbe0dc5, 0x0d95dd3a, 0xdddcffbe, 0xffbe05e5,
+ 0x05b5de32, 0x00a6ff80, 0x0b713fa4, 0x05e239fd,
+ 0x3620391c, 0xffbd0080, 0x1784fd8e, 0x11e00b71,
+ 0x0640dd8a, 0x078000ff, 0x170400e1, 0x16c2093c,
+ 0x12610007, 0x126305b2, 0xffbe05ba, 0xffbedbb8,
+ 0x51e0eba0, 0x17243592, 0x1285c0a1, 0x063c2dd1,
+ 0xaaaacc00, 0x0c57efa4, 0x0c560744, 0x0d91ea61,
+ 0xea630db2, 0xea650dc2, 0xea660dd2, 0x0df50de2,
+ 0xe2dcffbe, 0xffbe0dc5, 0x0d95e32e, 0xe3e8ffbe,
+ 0xffbe05e5, 0x05b5e47c, 0x00feff80, 0x0c573fa4,
+ 0x05e239fd, 0x3620391c, 0xffbd0400, 0x1784fd0a,
+ 0x11e00c57, 0x0640dd8a, 0x078000ff, 0xef840061,
+ 0x101d0b73, 0x359b126b, 0x000c0042, 0x0012000f,
+ 0x00180015, 0x001e001b, 0x00240021, 0x002a0027,
+ 0xffbe002d, 0x2595dd88, 0x005cff80, 0xffbe1de5,
+ 0x1db5de12, 0xde3effbe, 0xffbe1d85, 0x15d5de94,
+ 0xde9cffbe, 0xffbe15a5, 0x0df5dea4, 0xdf38ffbe,
+ 0xffbe0dc5, 0x0d95dfaa, 0xdfe0ffbe, 0xffbe05e5,
+ 0x05b5dff6, 0xe054ffbe, 0x0b733f84, 0x0d9239fd,
+ 0x99000622, 0x3902aaaa, 0x01003620, 0xfc78ffbd,
+ 0x007f0640, 0x00610780, 0x0b73efa4, 0x0d81ea61,
+ 0xea630da2, 0x0dd20db1, 0x0de2ea65, 0xffbe0df5,
+ 0x0dc5e036, 0xe05cffbe, 0xffbe0d95, 0x05e5e098,
+ 0xe0e8ffbe, 0xffbe05b5, 0x3fa4e198, 0x39fd0b73,
+ 0x06220d92, 0xaaaabb00, 0x36203902, 0xffbd0200,
+ 0x0640fc26, 0x0780007f, 0xef840061, 0x101d0c59,
+ 0x359b126b, 0x000c0042, 0x0012000f, 0x00180015,
+ 0x001e001b, 0x00240021, 0x002a0027, 0xffbe002d,
+ 0x2595e3c8, 0x005cff80, 0xffbe1de5, 0x1db5e41c,
+ 0xe47affbe, 0xffbe1d85, 0x15d5e4e0, 0xe508ffbe,
+ 0xffbe15a5, 0x0df5e530, 0xe544ffbe, 0xffbe0dc5,
+ 0x0d95e61e, 0xe680ffbe, 0xffbe05e5, 0x05b5e696,
+ 0xe728ffbe, 0x0c593f84, 0x0d9239fd, 0xdd000622,
+ 0x3902aaaa, 0x08003620, 0xfb9cffbd, 0x007f0640,
+ 0x00610780, 0x0c59efa4, 0x0d81ea61, 0xea630dd2,
+ 0x05f20de1, 0x0de2ea65, 0xffbe0df5, 0x0dc5e70a,
+ 0xe734ffbe, 0xffbe0d95, 0x05e5e840, 0xe890ffbe,
+ 0xffbe05b5, 0x3fa4e8c4, 0x39fd0c59, 0x06220d92,
+ 0xaaaaee00, 0x36203902, 0xffbd1000, 0x0640fb4a,
+ 0x0780007f, 0x17240061, 0x1286c061, 0x16200d99,
+ 0x17640020, 0x3202c061, 0xffbe3a00, 0xefa4ef1c,
+ 0x07440cd5, 0xea610cd9, 0x0db20d91, 0x15c1ea63,
+ 0xea650db2, 0x0de20dc1, 0xffbe0df5, 0x0dc5eb38,
+ 0xeb5effbe, 0xffbe0d95, 0x05e5ebe6, 0xec4affbe,
+ 0xffbe05b5, 0x3fa4ecc8, 0x39fd0cd5, 0x06220d92,
+ 0xaaaaff00, 0x36203902, 0xffbd2000, 0x17a4fada,
+ 0x11e00cd9, 0x0640d5da, 0x0000007f, 0x000200de,
+ 0x0000102c, 0x00001064, 0x0000109e, 0x0000111c,
+ 0x0000115a, 0x00020142, 0x00020154, 0x000011a6,
+ 0x000011ee, 0x000012a6, 0x00001250, 0x000012f4,
+ 0x00001376, 0x0000ccc8, 0x0000ccfc, 0x0000cd72,
+ 0x0000cda8, 0x0000ce0a, 0x0000cecc, 0x000215d0,
+ 0x0000cfc4, 0x0000d018, 0x0000d062, 0x00021650,
+ 0x0000d12e, 0x0000d1a8, 0x0000d204, 0x0000d274,
+ 0x0000d2d0, 0x0000d334, 0x0000d3fe, 0x0000d462,
+ 0x0000d4e8, 0x0000d54a, 0x0000d5d0, 0x0000d632,
+ 0x0000d67a, 0x0000d6e2, 0x0000d73a, 0x0000d7b4,
+ 0x0000d84c, 0x0000d8c4, 0x0000d916, 0x0000d968,
+ 0x0000d9e4, 0x0000da36, 0x0000dab2, 0x0000db04,
+ 0x0000db5a, 0x0000db84, 0x0000dba4, 0x0000dbd8,
+ 0x0000dc22, 0x0000dc50, 0x0000dc90, 0x0000dcc6,
+ 0x0000dd14, 0x0000dd62, 0x0000dd86, 0x0000dda2,
+ 0x0000ddba, 0x0000ddce, 0x0000dde2, 0x0000ddf8,
+ 0x0000de12, 0x0000de28, 0x0000de3e, 0x0000de84,
+ 0x0000defe, 0x0000dfb2, 0x0000dfe6, 0x0000e01a,
+ 0x0000e050, 0x0000e086, 0x0000e0bc, 0x0000e0f2,
+ 0x0000e150, 0x0000e19c, 0x0000e1d0, 0x0000e212,
+ 0x0000e304, 0x0000e27a, 0x0000e318, 0x0000e3a4,
+ 0x0000e42a, 0x0000c608, 0x0000c6d8, 0x0000c74e,
+ 0x0000c76a, 0x0000c786, 0x0000c7d6, 0x0000c866,
+ 0x0000c930, 0x0000c960, 0x0000c98e, 0x0000c9c8,
+ 0x0000c9de, 0x0000c9fc, 0x0000ca28, 0x0000ca6c,
+ 0x0000ca90, 0x0000caa2, 0x0000cae4, 0x0000cb88,
+ 0x0000cc30, 0x0000cc52, 0x0000e578, 0x0000ea76,
+ 0x0000eae6, 0x0000eb6a, 0x0002196a, 0x00021998,
+ 0x0000eff6, 0x0000f018, 0x000219d4, 0x00021a16,
+ 0x0000f11e, 0x0000f146, 0x00021a3e, 0x00021a6e,
+ 0x0000f23e, 0x0000f268, 0x0000f29e, 0x00021a8a,
+ 0x0000f3c8, 0x0000f3e8, 0x00021ac6, 0x00021ad6,
+ 0x0000f48a, 0x00021ae6, 0x00021b28, 0x0000f57e,
+ 0x0000f60c, 0x0000f660, 0x0000f68a, 0x0000f6a2,
+ 0x0000f6b2, 0x0000f6dc, 0x00021b42, 0x00021bbe,
+ 0x0000f940, 0x0000f9b6, 0x0000fe5e, 0x0000ffbc,
+ 0x00010084, 0x000105e0, 0x000106ee, 0x00010722,
+ 0x00010762, 0x0001078a, 0x000107f8, 0x0001085c,
+ 0x0001089e, 0x000109e8, 0x00010be0, 0x00010c84,
+ 0x00010cf4, 0x00010d82, 0x00010da0, 0x00010e0e,
+ 0x00010e60, 0x00010eb4, 0x00010f18, 0x00010f66,
+ 0x00010f6e, 0x00010f76, 0x00010fb6, 0x00010fd4,
+ 0x00001ed6, 0x00002164, 0x000022bc, 0x000023ec,
+ 0x00002328, 0x00002530, 0x00000000, 0x000025d4,
+ 0x0000274c, 0x000208ea, 0x000034b4, 0x000035ca,
+ 0x000036ae, 0x0000372e, 0x0000382e, 0x0000385e,
+ 0x00003910, 0x00003960, 0x0000398e, 0x000039fc,
+ 0x00003a68, 0x00003a98, 0x00003ace, 0x00003b0e,
+ 0x00003b2e, 0x00003b60, 0x00003b6a, 0x000208fe,
+ 0x00003bb4, 0x00003cba, 0x00003d48, 0x00003dd4,
+ 0x00003e80, 0x00003f26, 0x0002091a, 0x00004030,
+ 0x0000408a, 0x00004116, 0x00004144, 0x000041e4,
+ 0x00004328, 0x00004416, 0x0000450a, 0x00004572,
+ 0x000045a8, 0x000045fc, 0x00004650, 0x0000468c,
+ 0x000046de, 0x00004790, 0x0000488c, 0x00004a8c,
+ 0x000048ac, 0x00004ab0, 0x00000000, 0x00000000,
+ 0x00000000, 0x00004c18, 0x00004ae0, 0x000022f2,
+ 0x00004e64, 0x00006e08, 0x00006c0e, 0x00007a08,
+ 0x00007a48, 0x00007aba, 0x00007ada, 0x00007af8,
+ 0x00007b82, 0x00007bd2, 0x00007c40, 0x00007cae,
+ 0x000211b6, 0x00021206, 0x00021274, 0x00008484,
+ 0x0000851c, 0x0000857a, 0x000085ca, 0x0000865e,
+ 0x00008758, 0x000087ec, 0x000088a2, 0x00008948,
+ 0x00008a54, 0x00008ac8, 0x00008b58, 0x00008bdc,
+ 0x00008bf2, 0x00008c4c, 0x00008cb4, 0x00008d5e,
+ 0x00008de6, 0x00008e6c, 0x00008f34, 0x00008f5e,
+ 0x00008ff4, 0x00009046, 0x000090da, 0x0000911c,
+ 0x00009146, 0x0000918e, 0x000091ae, 0x000091fa,
+ 0x000092e4, 0x000093a0, 0x000093e2, 0x00009424,
+ 0x00009458, 0x00009488, 0x000094ca, 0x0000950c,
+ 0x00009540, 0x00009586, 0x000096ac, 0x000097f6,
+ 0x000212c0, 0x00009bb2, 0x00009bde, 0x00009c12,
+ 0x00021362, 0x00009daa, 0x00009e20, 0x00009e7a,
+ 0x00009eb4, 0x00009f1a, 0x00009f7e, 0x00009fd6,
+ 0x0000a00a, 0x0002138c, 0x0000a0cc, 0x0000a110,
+ 0x0000a156, 0x0000a192, 0x0000a1e2, 0x0000a28e,
+ 0x0000a3ec, 0x0000a4ac, 0x0000a4d6, 0x0000a52a,
+ 0x0000a62c, 0x0000a662, 0x0000a77c, 0x0000a7be,
+ 0x0000a7e4, 0x0000a820, 0x0000a87a, 0x0000a914,
+ 0x0000a972, 0x0000aa32, 0x0000aaa2, 0x0000abf8,
+ 0x0000ad28, 0x0000ad48, 0x0000adb0, 0x0000ae52,
+ 0x0000ae8c, 0x0000af88, 0x0000b002, 0x0000b0ae,
+ 0x0000b1aa, 0x0000b2f0, 0x0000b3b0, 0x0000b442,
+ 0x0000b470, 0x0000b51a, 0x0000b550, 0x0000b578,
+ 0x0000b59a, 0x0000b5cc, 0x0000b5f6, 0x0000b648,
+ 0x0000b78e, 0x0000b7e6, 0x0000b894, 0x000214e8,
+ 0x0000bb76, 0x0000bce2, 0x0000bd04, 0x0000bd94,
+ 0x0000be98, 0x0000bfb0, 0x0000bfb2, 0x0000bff2,
+ 0x0000c060, 0x0000c0d8, 0x0000c158, 0x0000c1c6,
+ 0x0000c30e, 0x000215a8, 0x0000c388, 0x0000c4d0,
+ 0x0000c50e, 0x0000c548, 0x0000c588, 0x0000c5c8,
+ 0x000013e4, 0x00001436, 0x0000147e, 0x000014a6,
+ 0x000014de, 0x000014f2, 0x00001546, 0x000015c4,
+ 0x000015ea, 0x0000164c, 0x00001660, 0x0000168e,
+ 0x000016ca, 0x000016f0, 0x0000171e, 0x0000175e,
+ 0x00001798, 0x000017be, 0x000017e4, 0x0000183a,
+ 0x0000186a, 0x000018cc, 0x0000193a, 0x0002017e,
+ 0x00001966, 0x0000198e, 0x0000a1ca, 0x0000c2b4,
+ 0x000201bc, 0x0000cc74, 0x00011014, 0x00011076,
+ 0x000032dc, 0x000079cf
+};
+
+#endif /* __FIRMWARE_R8A779X_USB3_V3__ */
diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c
new file mode 100644
index 0000000..d47c996
--- /dev/null
+++ b/drivers/usb/host/xhci-rcar.c
@@ -0,0 +1,159 @@
+/*
+ * Copyright (C) 2017 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Renesas RCar USB HOST xHCI Controller
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <fdtdec.h>
+#include <usb.h>
+#include <wait_bit.h>
+
+#include "xhci.h"
+#include "xhci-rcar-r8a779x_usb3_v3.h"
+
+/* Register Offset */
+#define RCAR_USB3_DL_CTRL 0x250 /* FW Download Control & Status */
+#define RCAR_USB3_FW_DATA0 0x258 /* FW Data0 */
+
+/* Register Settings */
+/* FW Download Control & Status */
+#define RCAR_USB3_DL_CTRL_ENABLE BIT(0)
+#define RCAR_USB3_DL_CTRL_FW_SUCCESS BIT(4)
+#define RCAR_USB3_DL_CTRL_FW_SET_DATA0 BIT(8)
+
+struct rcar_xhci_platdata {
+ fdt_addr_t hcd_base;
+ struct clk clk;
+};
+
+/**
+ * Contains pointers to register base addresses
+ * for the usb controller.
+ */
+struct rcar_xhci {
+ struct xhci_ctrl ctrl; /* Needs to come first in this struct! */
+ struct usb_platdata usb_plat;
+ struct xhci_hccr *hcd;
+};
+
+static int xhci_rcar_download_fw(struct rcar_xhci *ctx, const u32 *fw_data,
+ const size_t fw_array_size)
+{
+ void __iomem *regs = (void __iomem *)ctx->hcd;
+ int i, ret;
+
+ /* Download R-Car USB3.0 firmware */
+ setbits_le32(regs + RCAR_USB3_DL_CTRL, RCAR_USB3_DL_CTRL_ENABLE);
+
+ for (i = 0; i < fw_array_size; i++) {
+ writel(fw_data[i], regs + RCAR_USB3_FW_DATA0);
+ setbits_le32(regs + RCAR_USB3_DL_CTRL,
+ RCAR_USB3_DL_CTRL_FW_SET_DATA0);
+
+ ret = wait_for_bit("xhci-rcar", regs + RCAR_USB3_DL_CTRL,
+ RCAR_USB3_DL_CTRL_FW_SET_DATA0, false,
+ 10, false);
+ if (ret)
+ break;
+ }
+
+ clrbits_le32(regs + RCAR_USB3_DL_CTRL, RCAR_USB3_DL_CTRL_ENABLE);
+
+ ret = wait_for_bit("xhci-rcar", regs + RCAR_USB3_DL_CTRL,
+ RCAR_USB3_DL_CTRL_FW_SUCCESS, true,
+ 10, false);
+
+ return ret;
+}
+
+static int xhci_rcar_probe(struct udevice *dev)
+{
+ struct rcar_xhci_platdata *plat = dev_get_platdata(dev);
+ struct rcar_xhci *ctx = dev_get_priv(dev);
+ struct xhci_hcor *hcor;
+ int len, ret;
+
+ ret = clk_get_by_index(dev, 0, &plat->clk);
+ if (ret < 0) {
+ dev_err(dev, "Failed to get USB3 clock\n");
+ return ret;
+ }
+
+ ret = clk_enable(&plat->clk);
+ if (ret) {
+ dev_err(dev, "Failed to enable USB3 clock\n");
+ goto err_clk;
+ }
+
+ ctx->hcd = (struct xhci_hccr *)plat->hcd_base;
+ len = HC_LENGTH(xhci_readl(&ctx->hcd->cr_capbase));
+ hcor = (struct xhci_hcor *)((uintptr_t)ctx->hcd + len);
+
+ ret = xhci_rcar_download_fw(ctx, firmware_r8a779x_usb3_v3,
+ ARRAY_SIZE(firmware_r8a779x_usb3_v3));
+ if (ret) {
+ dev_err(dev, "Failed to download firmware\n");
+ goto err_fw;
+ }
+
+ ret = xhci_register(dev, ctx->hcd, hcor);
+ if (ret) {
+ dev_err(dev, "Failed to register xHCI\n");
+ goto err_fw;
+ }
+
+ return 0;
+
+err_fw:
+ clk_disable(&plat->clk);
+err_clk:
+ clk_free(&plat->clk);
+ return ret;
+}
+
+static int xhci_rcar_deregister(struct udevice *dev)
+{
+ struct rcar_xhci_platdata *plat = dev_get_platdata(dev);
+
+ clk_disable(&plat->clk);
+ clk_free(&plat->clk);
+
+ return xhci_deregister(dev);
+}
+
+static int xhci_rcar_ofdata_to_platdata(struct udevice *dev)
+{
+ struct rcar_xhci_platdata *plat = dev_get_platdata(dev);
+
+ plat->hcd_base = devfdt_get_addr(dev);
+ if (plat->hcd_base == FDT_ADDR_T_NONE) {
+ debug("Can't get the XHCI register base address\n");
+ return -ENXIO;
+ }
+
+ return 0;
+}
+
+static const struct udevice_id xhci_rcar_ids[] = {
+ { .compatible = "renesas,xhci-r8a7795" },
+ { .compatible = "renesas,xhci-r8a7796" },
+ { }
+};
+
+U_BOOT_DRIVER(usb_xhci) = {
+ .name = "xhci_rcar",
+ .id = UCLASS_USB,
+ .probe = xhci_rcar_probe,
+ .remove = xhci_rcar_deregister,
+ .ops = &xhci_usb_ops,
+ .of_match = xhci_rcar_ids,
+ .ofdata_to_platdata = xhci_rcar_ofdata_to_platdata,
+ .platdata_auto_alloc_size = sizeof(struct rcar_xhci_platdata),
+ .priv_auto_alloc_size = sizeof(struct rcar_xhci),
+ .flags = DM_FLAG_ALLOC_PRIV_DMA,
+};
diff --git a/fs/ext4/ext4_common.c b/fs/ext4/ext4_common.c
index 31952f4..dac9545 100644
--- a/fs/ext4/ext4_common.c
+++ b/fs/ext4/ext4_common.c
@@ -660,6 +660,11 @@
offset = 0;
do {
+ if (offset & 3) {
+ printf("Badly aligned ext2_dirent\n");
+ break;
+ }
+
dir = (struct ext2_dirent *)(block_buffer + offset);
direntname = (char*)(dir) + sizeof(struct ext2_dirent);
@@ -880,6 +885,11 @@
offset = 0;
do {
+ if (offset & 3) {
+ printf("Badly aligned ext2_dirent\n");
+ break;
+ }
+
previous_dir = dir;
dir = (struct ext2_dirent *)(block_buffer + offset);
direntname = (char *)(dir) + sizeof(struct ext2_dirent);
diff --git a/fs/ext4/ext4fs.c b/fs/ext4/ext4fs.c
index b0c7303..9ee2caf 100644
--- a/fs/ext4/ext4fs.c
+++ b/fs/ext4/ext4fs.c
@@ -64,6 +64,9 @@
char *delayed_buf = NULL;
short status;
+ if (blocksize <= 0)
+ return -1;
+
/* Adjust len so it we can't read past the end of the file. */
if (len + pos > filesize)
len = (filesize - pos);
@@ -127,6 +130,7 @@
(blockend >> log2blksz);
}
} else {
+ int n;
if (previous_block_number != -1) {
/* spill */
status = ext4fs_devread(delayed_start,
@@ -137,7 +141,11 @@
return -1;
previous_block_number = -1;
}
- memset(buf, 0, blocksize - skipfirst);
+ /* Zero no more than `len' bytes. */
+ n = blocksize - skipfirst;
+ if (n > len)
+ n = len;
+ memset(buf, 0, n);
}
buf += blocksize - skipfirst;
}
diff --git a/include/configs/imx6-engicam.h b/include/configs/imx6-engicam.h
index 86c1d38..0c45e06 100644
--- a/include/configs/imx6-engicam.h
+++ b/include/configs/imx6-engicam.h
@@ -215,17 +215,6 @@
# endif
# include "imx6_spl.h"
-# ifdef CONFIG_SPL_BUILD
-# if defined(CONFIG_TARGET_MX6Q_ICORE_RQS) || defined(CONFIG_TARGET_MX6UL_ISIOT)
-# define CONFIG_SYS_FSL_USDHC_NUM 2
-# else
-# define CONFIG_SYS_FSL_USDHC_NUM 1
-# endif
-
-# define CONFIG_SYS_FSL_ESDHC_ADDR 0
-# undef CONFIG_DM_GPIO
-# undef CONFIG_DM_MMC
-# endif
#endif
#endif /* __IMX6_ENGICAM_CONFIG_H */
diff --git a/include/configs/mx53ppd.h b/include/configs/mx53ppd.h
new file mode 100644
index 0000000..92dd845
--- /dev/null
+++ b/include/configs/mx53ppd.h
@@ -0,0 +1,248 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ * Jason Liu <r64343@freescale.com>
+ *
+ * Configuration settings for Freescale MX53 low cost board.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/imx-regs.h>
+
+#define CONSOLE_DEV "ttymxc0"
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+
+#define CONFIG_SYS_FSL_CLK
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
+
+#define CONFIG_HW_WATCHDOG
+#define CONFIG_IMX_WATCHDOG
+#define CONFIG_WATCHDOG_TIMEOUT_MSECS 8000
+
+#define CONFIG_MISC_INIT_R
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_MXC_GPIO
+#define CONFIG_REVISION_TAG
+
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE UART1_BASE
+
+/* MMC Configs */
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR 0
+#define CONFIG_SYS_FSL_ESDHC_NUM 2
+
+#define CONFIG_SUPPORT_RAW_INITRD /* bootz raw initrd support */
+
+/* Eth Configs */
+#define CONFIG_MII
+
+#define CONFIG_FEC_MXC
+#define IMX_FEC_BASE FEC_BASE_ADDR
+#define CONFIG_FEC_MXC_PHYADDR 0x1F
+
+/* USB Configs */
+#define CONFIG_USB_EHCI_MX5
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_USB_ETHER_MCS7830
+#define CONFIG_USB_ETHER_SMSC95XX
+#define CONFIG_MXC_USB_PORT 1
+#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS 0
+
+#define CONFIG_SYS_RTC_BUS_NUM 2
+#define CONFIG_SYS_I2C_RTC_ADDR 0x30
+
+/* I2C Configs */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
+
+/* PMIC Controller */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_DIALOG_POWER
+#define CONFIG_POWER_FSL
+#define CONFIG_POWER_FSL_MC13892
+#define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR 0x48
+#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x8
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+
+/* Command definition */
+#define CONFIG_SUPPORT_RAW_INITRD
+
+#define CONFIG_ETHPRIME "FEC0"
+
+#define CONFIG_LOADADDR 0x72000000 /* loadaddr env var */
+#define CONFIG_SYS_TEXT_BASE 0x77800000
+
+#define PPD_CONFIG_NFS \
+ "nfsserver=192.168.252.95\0" \
+ "gatewayip=192.168.252.95\0" \
+ "netmask=255.255.255.0\0" \
+ "ipaddr=192.168.252.99\0" \
+ "kernsize=0x2000\0" \
+ "use_dhcp=0\0" \
+ "nfsroot=/opt/springdale/rd\0" \
+ "bootargs_nfs=setenv bootargs ${bootargs} root=/dev/nfs " \
+ "${kern_ipconf} nfsroot=${nfsserver}:${nfsroot},v3,tcp rw\0" \
+ "choose_ip=if test $use_dhcp = 1; then set kern_ipconf ip=dhcp; " \
+ "set getcmd dhcp; else set kern_ipconf " \
+ "ip=${ipaddr}:${nfsserver}:${gatewayip}:${netmask}::eth0:off; " \
+ "set getcmd tftp; fi\0" \
+ "nfs=run choose_ip setargs bootargs_nfs; ${getcmd} ${loadaddr} " \
+ "${nfsserver}:${image}; bootm ${loadaddr}\0" \
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ PPD_CONFIG_NFS \
+ "bootlimit=10\0" \
+ "image=/boot/fitImage\0" \
+ "fdt_high=0xffffffff\0" \
+ "dev=mmc\0" \
+ "devnum=0\0" \
+ "rootdev=mmcblk0p\0" \
+ "quiet=quiet loglevel=0\0" \
+ "console=" CONSOLE_DEV "\0" \
+ "lvds=ldb\0" \
+ "setargs=setenv bootargs ${lvds} jtag=on mem=2G " \
+ "vt.global_cursor_default=0 bootcause=${bootcause} ${quiet} " \
+ "console=${console} ${rtc_status}\0" \
+ "bootargs_emmc=setenv bootargs root=/dev/${rootdev}${partnum} ro " \
+ "rootwait ${bootargs}\0" \
+ "doquiet=if ext2load ${dev} ${devnum}:5 0x7000A000 /boot/console; " \
+ "then setenv quiet; fi\0" \
+ "hasfirstboot=ext2load ${dev} ${devnum}:${partnum} 0x7000A000 " \
+ "/boot/bootcause/firstboot\0" \
+ "swappartitions=setexpr partnum 3 - ${partnum}\0" \
+ "failbootcmd=" \
+ "ppd_lcd_enable; " \
+ "msg=\"Monitor failed to start. " \
+ "Try again, or contact GE Service for support.\"; " \
+ "echo $msg; " \
+ "setenv stdout vga; " \
+ "echo \"\n\n\n\n \" $msg; " \
+ "setenv stdout serial; " \
+ "mw.b 0x7000A000 0xbc; " \
+ "mw.b 0x7000A001 0x00; " \
+ "ext4write ${dev} ${devnum}:5 0x7000A000 /boot/failures 2\0" \
+ "altbootcmd=" \
+ "run doquiet; " \
+ "setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
+ "run hasfirstboot || setenv partnum 0; " \
+ "if test ${partnum} != 0; then " \
+ "setenv bootcause REVERT; " \
+ "run swappartitions loadimage doboot; " \
+ "fi; " \
+ "run failbootcmd\0" \
+ "loadimage=" \
+ "ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
+ "doboot=" \
+ "echo Booting from ${dev}:${devnum}:${partnum} ...; " \
+ "run setargs; " \
+ "run bootargs_emmc; " \
+ "bootm ${loadaddr}\0" \
+ "tryboot=" \
+ "setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
+ "run loadimage || run swappartitions && run loadimage || " \
+ "setenv partnum 0 && echo MISSING IMAGE;" \
+ "run doboot; " \
+ "run failbootcmd\0" \
+ "video-mode=" \
+ "lcd:800x480-24@60,monitor=lcd\0" \
+
+#define CONFIG_MMCBOOTCOMMAND \
+ "if mmc dev ${devnum}; then " \
+ "run doquiet; " \
+ "run tryboot; " \
+ "fi; " \
+
+#define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND
+
+#define CONFIG_ARP_TIMEOUT 200UL
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
+
+#define CONFIG_SYS_MAXARGS 48 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+
+#define CONFIG_SYS_MEMTEST_START 0x70000000
+#define CONFIG_SYS_MEMTEST_END 0x70010000
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+
+#define CONFIG_CMDLINE_EDITING
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS 2
+#define PHYS_SDRAM_1 CSD0_BASE_ADDR
+#define PHYS_SDRAM_1_SIZE (gd->bd->bi_dram[0].size)
+#define PHYS_SDRAM_2 CSD1_BASE_ADDR
+#define PHYS_SDRAM_2_SIZE (gd->bd->bi_dram[1].size)
+#define PHYS_SDRAM_SIZE (gd->ram_size)
+
+#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1)
+#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR)
+#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE)
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* FLASH and environment organization */
+#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
+#define CONFIG_ENV_SIZE (8 * 1024)
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
+
+#define CONFIG_CMD_FUSE
+#define CONFIG_FSL_IIM
+
+#define CONFIG_SYS_I2C_SPEED 100000
+
+/* I2C1 */
+#define CONFIG_SYS_NUM_I2C_BUSES 9
+#define CONFIG_SYS_I2C_MAX_HOPS 1
+#define CONFIG_SYS_I2C_BUSES { {0, {I2C_NULL_HOP} }, \
+ {0, {{I2C_MUX_PCA9547, 0x70, 0} } }, \
+ {0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \
+ {0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \
+ {0, {{I2C_MUX_PCA9547, 0x70, 3} } }, \
+ {0, {{I2C_MUX_PCA9547, 0x70, 4} } }, \
+ {0, {{I2C_MUX_PCA9547, 0x70, 5} } }, \
+ {0, {{I2C_MUX_PCA9547, 0x70, 6} } }, \
+ {0, {{I2C_MUX_PCA9547, 0x70, 7} } }, \
+ }
+
+#define CONFIG_BCH
+
+#define CONFIG_BOOTCOUNT_LIMIT
+
+/* Backlight Control */
+#define CONFIG_PWM_IMX
+#define CONFIG_IMX6_PWM_PER_CLK 66666000
+
+/* Framebuffer and LCD */
+#ifdef CONFIG_VIDEO
+ #define CONFIG_VIDEO_IPUV3
+#endif
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
index 5ef78a7..f4c9c28 100644
--- a/include/configs/mx6sxsabresd.h
+++ b/include/configs/mx6sxsabresd.h
@@ -57,9 +57,9 @@
"videomode=video=ctfb:x:800,y:480,depth:24,pclk:29850,le:89,ri:164,up:23,lo:10,hs:10,vs:10,sync:0,vmode:0\0" \
"mmcdev=2\0" \
"mmcpart=1\0" \
- "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
+ "finduuid=part uuid mmc 2:2 uuid\0" \
"mmcargs=setenv bootargs console=${console},${baudrate} " \
- "root=${mmcroot}\0" \
+ "root=PARTUUID=${uuid} rootwait rw\0" \
"loadbootscript=" \
"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
"bootscript=echo Running bootscript from mmc ...; " \
@@ -67,6 +67,7 @@
"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
"mmcboot=echo Booting from mmc ...; " \
+ "run finduuid; " \
"run mmcargs; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if run loadfdt; then " \
diff --git a/include/configs/pico-imx6ul.h b/include/configs/pico-imx6ul.h
index 75658fd..f821b67 100644
--- a/include/configs/pico-imx6ul.h
+++ b/include/configs/pico-imx6ul.h
@@ -47,6 +47,13 @@
#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
#define DFU_DEFAULT_POLL_TIMEOUT 300
+#define CONFIG_DFU_ENV_SETTINGS \
+ "dfu_alt_info=uboot raw 0x2 0x400 mmcpart 1;" \
+ "boot part 0 1;" \
+ "/zImage ext4 0 1;" \
+ "/imx6ul-pico-hobbit.dtb ext4 0 1;" \
+ "rootfs part 0 2\0" \
+
#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
#define CONFIG_EXTRA_ENV_SETTINGS \
@@ -58,14 +65,19 @@
"fdt_addr=0x83000000\0" \
"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
- "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
"mmcautodetect=yes\0" \
- "dfu_alt_info=boot raw 0x2 0x400 mmcpart 1\0" \
+ CONFIG_DFU_ENV_SETTINGS \
+ "finduuid=part uuid mmc 0:2 uuid\0" \
+ "partitions=" \
+ "uuid_disk=${uuid_gpt_disk};" \
+ "name=boot,size=16MiB;name=rootfs,size=0,uuid=${uuid_gpt_rootfs}\0" \
+ "setup_emmc=gpt write mmc 0 $partitions; reset;\0" \
"mmcargs=setenv bootargs console=${console},${baudrate} " \
- "root=${mmcroot}\0" \
- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+ "root=PARTUUID=${uuid} rootwait rw\0" \
+ "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+ "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
"mmcboot=echo Booting from mmc ...; " \
+ "run finduuid; " \
"run mmcargs; " \
"if run loadfdt; then " \
"bootz ${loadaddr} - ${fdt_addr}; " \
@@ -144,6 +156,5 @@
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_SYS_MMC_ENV_PART 0
-#define CONFIG_MMCROOT "/dev/mmcblk0p2"
#endif /* __PICO_IMX6UL_CONFIG_H */
diff --git a/include/fdt_support.h b/include/fdt_support.h
index 2bca4d7..e0f9086 100644
--- a/include/fdt_support.h
+++ b/include/fdt_support.h
@@ -133,6 +133,24 @@
static inline void fdt_fixup_crypto_node(void *blob, int sec_rev) {}
#endif
+/**
+ * Record information about a processed loadable in /fit-images (creating
+ * /fit-images if necessary).
+ *
+ * @param blob FDT blob to update
+ * @param index index of this loadable
+ * @param name name of the loadable
+ * @param load_addr address the loadable was loaded to
+ * @param size number of bytes loaded
+ * @param entry_point entry point (if specified, otherwise pass -1)
+ * @param type type (if specified, otherwise pass NULL)
+ * @param os os-type (if specified, otherwise pass NULL)
+ * @return 0 if ok, or -1 or -FDT_ERR_... on error
+ */
+int fdt_record_loadable(void *blob, u32 index, const char *name,
+ uintptr_t load_addr, u32 size, uintptr_t entry_point,
+ const char *type, const char *os);
+
#ifdef CONFIG_PCI
#include <pci.h>
int fdt_pci_dma_ranges(void *blob, int phb_off, struct pci_controller *hose);
diff --git a/include/image.h b/include/image.h
index 127cfc5..e9c18ce 100644
--- a/include/image.h
+++ b/include/image.h
@@ -152,6 +152,7 @@
IH_OS_OSE, /* OSE */
IH_OS_PLAN9, /* Plan 9 */
IH_OS_OPENRTOS, /* OpenRTOS */
+ IH_OS_ARM_TRUSTED_FIRMWARE, /* ARM Trusted Firmware */
IH_OS_COUNT,
};
diff --git a/include/spl.h b/include/spl.h
index b14a29c..308ce7b 100644
--- a/include/spl.h
+++ b/include/spl.h
@@ -23,8 +23,11 @@
struct spl_image_info {
const char *name;
u8 os;
- ulong load_addr;
- ulong entry_point;
+ uintptr_t load_addr;
+ uintptr_t entry_point;
+#if CONFIG_IS_ENABLED(LOAD_FIT)
+ void *fdt_addr;
+#endif
u32 size;
u32 flags;
void *arg;
@@ -268,7 +271,10 @@
int spl_mmc_load_image(struct spl_image_info *spl_image,
struct spl_boot_device *bootdev);
-void bl31_entry(void);
+/**
+ * spl_invoke_atf - boot using an ARM trusted firmware image
+ */
+void spl_invoke_atf(struct spl_image_info *spl_image);
/**
* board_return_to_bootrom - allow for boards to continue with the boot ROM
diff --git a/lib/Kconfig b/lib/Kconfig
index 18663ba..f447c53 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -80,6 +80,9 @@
config RBTREE
bool
+config BITREVERSE
+ bool "Bit reverse library from Linux"
+
source lib/dhry/Kconfig
menu "Security support"
diff --git a/test/run b/test/run
index caee4f8..5616097 100755
--- a/test/run
+++ b/test/run
@@ -3,9 +3,10 @@
run_test() {
$@
[ $? -ne 0 ] && result=$((result+1))
- echo "result $result"
}
+result=0
+
# Run all tests that the standard sandbox build can support
run_test ./test/py/test.py --bd sandbox --build