Add the board directory for SMN42
diff --git a/board/siemens/SMN42/Makefile b/board/siemens/SMN42/Makefile
new file mode 100644
index 0000000..2c7b54b
--- /dev/null
+++ b/board/siemens/SMN42/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := flash.o smn42.o
+SOBJTS := lowlevel_init.o
+
+SRCS := $(SOBJTS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJTS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/siemens/SMN42/config.mk b/board/siemens/SMN42/config.mk
new file mode 100644
index 0000000..b28f418
--- /dev/null
+++ b/board/siemens/SMN42/config.mk
@@ -0,0 +1,30 @@
+#
+# (C) Copyright 2000
+# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+# Marius Groeger <mgroeger@sysgo.de>
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#address where u-boot will be relocated
+#TEXT_BASE = 0x0
+TEXT_BASE = 0x81500000
diff --git a/board/siemens/SMN42/flash.c b/board/siemens/SMN42/flash.c
new file mode 100644
index 0000000..7d4977e
--- /dev/null
+++ b/board/siemens/SMN42/flash.c
@@ -0,0 +1,475 @@
+/*
+ * (C) Copyright 2006 Embedded Artists AB <www.embeddedartists.com>
+ *
+ * (C) Copyright 2007 Gary Jennejohn garyj@denx.de
+ * Modified to use the routines in cpu/arm720t/lpc2292/flash.c.
+ * Heavily modified to support the SMN42 board from Siemens
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/byteorder.h>
+#include <asm/arch/hardware.h>
+
+static unsigned long flash_addr_table[CFG_MAX_FLASH_BANKS] = CFG_FLASH_BANKS_LIST;
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+extern int lpc2292_copy_buffer_to_flash(flash_info_t *, ulong);
+extern int lpc2292_flash_erase(flash_info_t *, int, int);
+extern int lpc2292_write_buff (flash_info_t *, uchar *, ulong, ulong);
+static unsigned long ext_flash_init(void);
+static int ext_flash_erase(flash_info_t *, int, int);
+static int ext_write_buff(flash_info_t *, uchar *, ulong, ulong);
+
+/*-----------------------------------------------------------------------
+ */
+
+ulong flash_init (void)
+{
+ int j, k;
+ ulong size = 0;
+ ulong flashbase = 0;
+
+ flash_info[0].flash_id = PHILIPS_LPC2292;
+ flash_info[0].size = 0x003E000; /* 256 - 8 KB */
+ flash_info[0].sector_count = 17;
+ memset (flash_info[0].protect, 0, 17);
+ flashbase = 0x00000000;
+ for (j = 0, k = 0; j < 8; j++, k++) {
+ flash_info[0].start[k] = flashbase;
+ flashbase += 0x00002000;
+ }
+ for (j = 0; j < 2; j++, k++) {
+ flash_info[0].start[k] = flashbase;
+ flashbase += 0x00010000;
+ }
+ for (j = 0; j < 7; j++, k++) {
+ flash_info[0].start[k] = flashbase;
+ flashbase += 0x00002000;
+ }
+ size += flash_info[0].size;
+
+ /* Protect monitor and environment sectors */
+ flash_protect (FLAG_PROTECT_SET,
+ 0x0,
+ 0x0 + monitor_flash_len - 1,
+ &flash_info[0]);
+
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+ &flash_info[0]);
+
+ size += ext_flash_init();
+
+ return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t * info)
+{
+ int i;
+ int erased = 0;
+ unsigned long j;
+ unsigned long count;
+ unsigned char *p;
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case (PHILIPS_LPC2292 & FLASH_VENDMASK):
+ printf("Philips: ");
+ break;
+ case FLASH_MAN_AMD:
+ printf("AMD: ");
+ break;
+ default:
+ printf ("Unknown Vendor ");
+ break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case (PHILIPS_LPC2292 & FLASH_TYPEMASK):
+ printf("LPC2292 internal flash\n");
+ break;
+ case FLASH_S29GL128N:
+ printf ("S29GL128N (128 Mbit, uniform sector size)\n");
+ break;
+ default:
+ printf("Unknown Chip Type\n");
+ return;
+ }
+
+ printf (" Size: %ld KB in %d Sectors\n",
+ info->size >> 10, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; i++) {
+ if ((i % 5) == 0) {
+ printf ("\n ");
+ }
+ if (i < (info->sector_count - 1)) {
+ count = info->start[i+1] - info->start[i];
+ }
+ else {
+ count = info->start[0] + info->size - info->start[i];
+ }
+ p = (unsigned char*)(info->start[i]);
+ erased = 1;
+ for (j = 0; j < count; j++) {
+ if (*p != 0xFF) {
+ erased = 0;
+ break;
+ }
+ p++;
+ }
+ printf (" %08lX%s%s", info->start[i], info->protect[i] ? " RO" : " ",
+ erased ? " E" : " ");
+ }
+ printf ("\n");
+}
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case (PHILIPS_LPC2292 & FLASH_TYPEMASK):
+ return lpc2292_flash_erase(info, s_first, s_last);
+ case FLASH_S29GL128N:
+ return ext_flash_erase(info, s_first, s_last);
+ default:
+ return ERR_PROTECTED;
+ }
+ return ERR_PROTECTED;
+}
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case (PHILIPS_LPC2292 & FLASH_TYPEMASK):
+ return lpc2292_write_buff(info, src, addr, cnt);
+ case FLASH_S29GL128N:
+ return ext_write_buff(info, src, addr, cnt);
+ default:
+ return ERR_PROG_ERROR;
+ }
+ return ERR_PROG_ERROR;
+}
+
+/*--------------------------------------------------------------------------
+ * From here on is code for the external S29GL128N taken from cam5200_flash.c
+ */
+
+#define CFG_FLASH_WORD_SIZE unsigned short
+
+static int wait_for_DQ7_32(flash_info_t * info, int sect)
+{
+ ulong start, now, last;
+ volatile CFG_FLASH_WORD_SIZE *addr =
+ (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+
+ start = get_timer(0);
+ last = start;
+ while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
+ (CFG_FLASH_WORD_SIZE) 0x00800080) {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf("Timeout\n");
+ return -1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc('.');
+ last = now;
+ }
+ }
+ return 0;
+}
+
+int ext_flash_erase(flash_info_t * info, int s_first, int s_last)
+{
+ volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+ volatile CFG_FLASH_WORD_SIZE *addr2;
+ int flag, prot, sect, l_sect, ret;
+
+ ret = 0;
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN)
+ printf("- missing\n");
+ else
+ printf("- no sectors to erase\n");
+ return 1;
+ }
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf("Can't erase unknown flash type - aborted\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; ++sect) {
+ if (info->protect[sect])
+ prot++;
+ }
+
+ if (prot)
+ printf("- Warning: %d protected sectors will not be erased!", prot);
+
+ printf("\n");
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030; /* sector erase */
+
+ l_sect = sect;
+ /*
+ * Wait for each sector to complete, it's more
+ * reliable. According to AMD Spec, you must
+ * issue all erase commands within a specified
+ * timeout. This has been seen to fail, especially
+ * if printf()s are included (for debug)!!
+ */
+ ret = wait_for_DQ7_32(info, sect);
+ if (ret) {
+ ret = ERR_PROTECTED;
+ break;
+ }
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay(1000);
+
+ /* reset to read mode */
+ addr = (CFG_FLASH_WORD_SIZE *) info->start[0];
+ addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
+
+ if (ret)
+ printf(" error\n");
+ else
+ printf(" done\n");
+ return ret;
+}
+
+static ulong flash_get_size(vu_long * addr, flash_info_t * info)
+{
+ short i;
+ CFG_FLASH_WORD_SIZE value;
+ ulong base = (ulong) addr;
+ volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr;
+
+ /* Write auto select command: read Manufacturer ID */
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090;
+ udelay(1000);
+
+ value = addr2[0];
+
+ switch (value) {
+ case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+ }
+
+ value = addr2[1]; /* device ID */
+
+ switch (value) {
+ case (CFG_FLASH_WORD_SIZE)AMD_ID_MIRROR:
+ value = addr2[14];
+ switch(value) {
+ case (CFG_FLASH_WORD_SIZE)AMD_ID_GL128N_2:
+ value = addr2[15];
+ if (value != (CFG_FLASH_WORD_SIZE)AMD_ID_GL128N_3) {
+ info->flash_id = FLASH_UNKNOWN;
+ } else {
+ info->flash_id += FLASH_S29GL128N;
+ info->sector_count = 128;
+ info->size = 0x01000000;
+ }
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return(0);
+ }
+ break;
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+ }
+
+ /* set up sector start address table */
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00020000);
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+
+ info->protect[i] = addr2[2] & 1;
+ }
+
+ /* issue bank reset to return to read mode */
+ addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;
+
+ return (info->size);
+}
+
+static unsigned long ext_flash_init(void)
+{
+ unsigned long total_b = 0;
+ unsigned long size_b[CFG_MAX_FLASH_BANKS];
+ int i;
+
+ /* Init: no FLASHes known */
+ for (i = 1; i < CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ flash_info[i].sector_count = -1;
+ flash_info[i].size = 0;
+
+ /* call flash_get_size() to initialize sector address */
+ size_b[i] = flash_get_size((vu_long *) flash_addr_table[i],
+ &flash_info[i]);
+
+ flash_info[i].size = size_b[i];
+
+ if (flash_info[i].flash_id == FLASH_UNKNOWN) {
+ printf("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
+ i+1, size_b[i], size_b[i] << 20);
+ flash_info[i].sector_count = -1;
+ flash_info[i].size = 0;
+ }
+
+ total_b += flash_info[i].size;
+ }
+
+ return total_b;
+}
+
+static int write_word(flash_info_t * info, ulong dest, ushort data)
+{
+ volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+ volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest;
+ volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) &data;
+ ulong start;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*dest2 & *data2) != *data2) {
+ return (2);
+ }
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0;
+ *dest2 = *data2;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer(0);
+ while ((*dest2 & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
+ (*data2 & (CFG_FLASH_WORD_SIZE) 0x00800080)) {
+
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ printf("WRITE_TOUT\n");
+ return (1);
+ }
+ }
+ return (0);
+}
+
+/*-----------------------------------------------------------------------
+ * This is taken from the original flash.c for the LPC2292 SODIMM board
+ * and modified to suit.
+ */
+
+int ext_write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+ ushort tmp;
+ ulong i;
+ uchar* src_org;
+ uchar* dst_org;
+ ulong cnt_org = cnt;
+ int ret = ERR_OK;
+
+ src_org = src;
+ dst_org = (uchar*)addr;
+
+ if (addr & 1) { /* if odd address */
+ tmp = *((uchar*)(addr - 1)); /* little endian */
+ tmp |= (*src << 8);
+ if (write_word(info, addr - 1, tmp))
+ return ERR_PROG_ERROR;
+ addr += 1;
+ cnt -= 1;
+ src++;
+ }
+ while (cnt > 1) {
+ tmp = ((*(src+1)) << 8) + (*src); /* little endian */
+ if (write_word(info, addr, tmp))
+ return ERR_PROG_ERROR;
+ addr += 2;
+ src += 2;
+ cnt -= 2;
+ }
+ if (cnt > 0) {
+ tmp = (*((uchar*)(addr + 1))) << 8;
+ tmp |= *src;
+ if (write_word(info, addr, tmp))
+ return ERR_PROG_ERROR;
+ }
+
+ for (i = 0; i < cnt_org; i++) {
+ if (*dst_org != *src_org) {
+ printf("Write failed. Byte %lX differs\n", i);
+ ret = ERR_PROG_ERROR;
+ break;
+ }
+ dst_org++;
+ src_org++;
+ }
+
+ return ret;
+}
diff --git a/board/siemens/SMN42/lowlevel_init.S b/board/siemens/SMN42/lowlevel_init.S
new file mode 100644
index 0000000..11abb63
--- /dev/null
+++ b/board/siemens/SMN42/lowlevel_init.S
@@ -0,0 +1,123 @@
+/*
+ * (C) Copyright 2006 Embedded Artists AB <www.embeddedartists.com>
+ *
+ * Slight modifications made to support the SMN42 board from Siemens.
+ * 2007 Gary Jennejohn garyj@denx.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/hardware.h>
+
+/* some parameters for the board */
+/* setting up the CPU-internal memory */
+#define SRAM_START 0x40000000
+#define SRAM_SIZE 0x00004000
+#define BCFG0_VALUE 0x1000ffef
+#define BCFG1_VALUE 0x10005D2F
+#define BCFG2_VALUE 0x10005D2F
+/*
+ * For P0.18 to set ZZ to the SRAMs to 1. Also set P0.2 (SCL) and P0.3 (SDA)
+ * for the bit-banger I2C driver correctly.
+ */
+#define IO0_VALUE 0x4000C
+
+_TEXT_BASE:
+ .word TEXT_BASE
+MEMMAP_ADR:
+ .word MEMMAP
+BCFG0_ADR:
+ .word BCFG0
+_BCFG0_VALUE:
+ .word BCFG0_VALUE
+BCFG1_ADR:
+ .word BCFG1
+_BCFG1_VALUE:
+ .word BCFG1_VALUE
+BCFG2_ADR:
+ .word BCFG2
+_BCFG2_VALUE:
+ .word BCFG2_VALUE
+IO0DIR_ADR:
+ .word IO0DIR
+_IO0DIR_VALUE:
+ .word IO0_VALUE
+IO0SET_ADR:
+ .word IO0SET
+_IO0SET_VALUE:
+ .word IO0_VALUE
+PINSEL2_ADR:
+ .word PINSEL2
+PINSEL2_MASK:
+ .word 0x00000000
+PINSEL2_VALUE:
+ .word 0x0F804914
+
+.extern _start
+
+.globl lowlevel_init
+lowlevel_init:
+ /* set up memory control register for bank 0 */
+ ldr r0, _BCFG0_VALUE
+ ldr r1, BCFG0_ADR
+ str r0, [r1]
+
+ /* set up memory control register for bank 1 */
+ ldr r0, _BCFG1_VALUE
+ ldr r1, BCFG1_ADR
+ str r0, [r1]
+
+ /* set up memory control register for bank 2 */
+ ldr r0, _BCFG2_VALUE
+ ldr r1, BCFG2_ADR
+ str r0, [r1]
+
+ /* set IO0DIR to make P0.2, P0.3 and P0.18 outputs */
+ ldr r0, _IO0DIR_VALUE
+ ldr r1, IO0DIR_ADR
+ str r0, [r1]
+
+ /* set P0.18 to 1 */
+ ldr r0, _IO0SET_VALUE
+ ldr r1, IO0SET_ADR
+ str r0, [r1]
+
+ /* set up PINSEL2 for bus-pins */
+ ldr r0, PINSEL2_ADR
+ ldr r1, [r0]
+ ldr r2, PINSEL2_MASK
+ ldr r3, PINSEL2_VALUE
+ and r1, r1, r2
+ orr r1, r1, r3
+ str r1, [r0]
+
+ /* move vectors to beginning of SRAM */
+ mov r2, #SRAM_START
+ mov r0, #0 /*_start*/
+ ldmneia r0!, {r3-r10}
+ stmneia r2!, {r3-r10}
+ ldmneia r0, {r3-r9}
+ stmneia r2, {r3-r9}
+
+ /* Set-up MEMMAP register, so vectors are taken from SRAM */
+ ldr r0, MEMMAP_ADR
+ mov r1, #0x02 /* vectors re-mapped to static RAM */
+ str r1, [r0]
+
+ /* everything is fine now */
+ mov pc, lr
diff --git a/board/siemens/SMN42/smn42.c b/board/siemens/SMN42/smn42.c
new file mode 100644
index 0000000..cbfc76c
--- /dev/null
+++ b/board/siemens/SMN42/smn42.c
@@ -0,0 +1,62 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2005 Rowel Atienza <rowel@diwalabs.com>
+ * Armadillo board HT1070
+ *
+ * (C) Copyright 2007 Gary Jennejohn <garyj@denx.de>
+ * Siemens board SMN42
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <clps7111.h>
+
+/* ------------------------------------------------------------------------- */
+
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+
+int board_init (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ /* arch number MACH_TYPE_ARMADILLO - not official*/
+ gd->bd->bi_arch_number = 83;
+
+ /* location of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x00000100;
+
+ return 0;
+}
+
+int dram_init (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+ return (0);
+}
diff --git a/board/siemens/SMN42/u-boot.lds b/board/siemens/SMN42/u-boot.lds
new file mode 100644
index 0000000..64d946c
--- /dev/null
+++ b/board/siemens/SMN42/u-boot.lds
@@ -0,0 +1,55 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ cpu/arm720t/start.o (.text)
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .got : { *(.got) }
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ __bss_start = .;
+ .bss : { *(.bss) }
+ _end = .;
+}