ARM: ls102xa: Setting device's stream id for SMMUs.
LS1 has 4 SMMUs for address translation of the masters. All the
SMMUs' stream IDs are 8-bit. The address translation depends on the
stream ID of the incoming transaction.
Each master has unique stream ID assigned to it and is configurable
through SCFG registers. The stream ID for the masters is identical
and share the same register field of STREAM ID registers.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index 148fc41..14af660 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -62,6 +62,8 @@
obj-$(CONFIG_ZM7300) += zm7300.o
obj-$(CONFIG_POWER_PFUZE100) += pfuze.o
+obj-$(CONFIG_LS102XA_STREAM_ID) += ls102xa_stream_id.o
+
# deal with common files for P-series corenet based devices
obj-$(CONFIG_P2041RDB) += p_corenet/
obj-$(CONFIG_P3041DS) += p_corenet/
diff --git a/board/freescale/common/ls102xa_stream_id.c b/board/freescale/common/ls102xa_stream_id.c
new file mode 100644
index 0000000..6154c9c
--- /dev/null
+++ b/board/freescale/common/ls102xa_stream_id.c
@@ -0,0 +1,18 @@
+/*
+ * Copyright 2014 Freescale Semiconductor
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/ls102xa_stream_id.h>
+
+void ls102xa_config_smmu_stream_id(struct smmu_stream_id *id, uint32_t num)
+{
+ uint32_t *scfg = (uint32_t *)CONFIG_SYS_FSL_SCFG_ADDR;
+ int i;
+
+ for (i = 0; i < num; i++)
+ out_be32(scfg + id[i].offset, id[i].stream_id);
+}
diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c
index 1679144..f08e54f 100644
--- a/board/freescale/ls1021aqds/ls1021aqds.c
+++ b/board/freescale/ls1021aqds/ls1021aqds.c
@@ -11,6 +11,7 @@
#include <asm/arch/ns_access.h>
#include <asm/arch/clock.h>
#include <asm/arch/fsl_serdes.h>
+#include <asm/arch/ls102xa_stream_id.h>
#include <asm/pcie_layerscape.h>
#include <hwconfig.h>
#include <mmc.h>
@@ -449,6 +450,23 @@
};
#endif
+struct smmu_stream_id dev_stream_id[] = {
+ { 0x100, 0x01, "ETSEC MAC1" },
+ { 0x104, 0x02, "ETSEC MAC2" },
+ { 0x108, 0x03, "ETSEC MAC3" },
+ { 0x10c, 0x04, "PEX1" },
+ { 0x110, 0x05, "PEX2" },
+ { 0x114, 0x06, "qDMA" },
+ { 0x118, 0x07, "SATA" },
+ { 0x11c, 0x08, "USB3" },
+ { 0x120, 0x09, "QE" },
+ { 0x124, 0x0a, "eSDHC" },
+ { 0x128, 0x0b, "eMA" },
+ { 0x14c, 0x0c, "2D-ACE" },
+ { 0x150, 0x0d, "USB2" },
+ { 0x18c, 0x0e, "DEBUG" },
+};
+
int board_init(void)
{
struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
@@ -471,6 +489,9 @@
config_serdes_mux();
#endif
+ ls102xa_config_smmu_stream_id(dev_stream_id,
+ ARRAY_SIZE(dev_stream_id));
+
#ifdef CONFIG_LS102XA_NS_ACCESS
enable_devices_ns_access(ns_dev, ARRAY_SIZE(ns_dev));
#endif
diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c
index 0e61aba..8ab229d 100644
--- a/board/freescale/ls1021atwr/ls1021atwr.c
+++ b/board/freescale/ls1021atwr/ls1021atwr.c
@@ -11,6 +11,7 @@
#include <asm/arch/ns_access.h>
#include <asm/arch/clock.h>
#include <asm/arch/fsl_serdes.h>
+#include <asm/arch/ls102xa_stream_id.h>
#include <asm/pcie_layerscape.h>
#include <mmc.h>
#include <fsl_esdhc.h>
@@ -388,6 +389,23 @@
};
#endif
+struct smmu_stream_id dev_stream_id[] = {
+ { 0x100, 0x01, "ETSEC MAC1" },
+ { 0x104, 0x02, "ETSEC MAC2" },
+ { 0x108, 0x03, "ETSEC MAC3" },
+ { 0x10c, 0x04, "PEX1" },
+ { 0x110, 0x05, "PEX2" },
+ { 0x114, 0x06, "qDMA" },
+ { 0x118, 0x07, "SATA" },
+ { 0x11c, 0x08, "USB3" },
+ { 0x120, 0x09, "QE" },
+ { 0x124, 0x0a, "eSDHC" },
+ { 0x128, 0x0b, "eMA" },
+ { 0x14c, 0x0c, "2D-ACE" },
+ { 0x150, 0x0d, "USB2" },
+ { 0x18c, 0x0e, "DEBUG" },
+};
+
int board_init(void)
{
struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
@@ -407,6 +425,9 @@
#endif
#endif
+ ls102xa_config_smmu_stream_id(dev_stream_id,
+ ARRAY_SIZE(dev_stream_id));
+
#ifdef CONFIG_LS102XA_NS_ACCESS
enable_devices_ns_access(ns_dev, ARRAY_SIZE(ns_dev));
#endif