commit 660a2e650d718fa01ad0e5da7907c2064c2e3cbe
author Heiko Schocher <hs@denx.de> Fri Sep 06 05:21:24 2013 +0200
committer Tom Rini <trini@ti.com> Fri Nov 01 15:30:51 2013 -0400
tree 3f0ffe673475dbfea4595435f7f66089bc385b62
parent 2fff63c2a5506a4d28b5410b68b470d7c869cb98

arm, da85x: update for the ipam390 board

- switch to correct ecc layout used by the RBL
  enable CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC
- update default environment
- change A2CR to correct value for UART boot mode
- adapt cs3cfg timings for nand
- change LED bootmode signalization

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Tom Rini <trini@ti.com>

board/Barix/ipam390/ipam390-ais-uart.cfg

diff --git a/board/Barix/ipam390/ipam390-ais-uart.cfg b/board/Barix/ipam390/ipam390-ais-uart.cfg
index e1a99f2..709cf23 100644
--- a/board/Barix/ipam390/ipam390-ais-uart.cfg
+++ b/board/Barix/ipam390/ipam390-ais-uart.cfg
@@ -109,7 +109,7 @@
 ;NANDFCR = 0x00000000
 [EMIF25ASYNC]
 A1CR = 0x00000000
-A2CR = 0x3FFFFFFE
+A2CR = 0x04202110
 A3CR = 0x00000000
 A4CR = 0x00000000
 NANDFCR = 0x00000012

board/Barix/ipam390/ipam390.c

diff --git a/board/Barix/ipam390/ipam390.c b/board/Barix/ipam390/ipam390.c
index f3f276e..ae88b42 100644
--- a/board/Barix/ipam390/ipam390.c
+++ b/board/Barix/ipam390/ipam390.c
@@ -264,7 +264,7 @@
 	static int green;
 
 	if (red == 0)
-		red = init_led(CONFIG_IPAM390_GPIO_LED_RED, "red", LED_OFF);
+		red = init_led(CONFIG_IPAM390_GPIO_LED_RED, "red", LED_ON);
 	if (red != CONFIG_IPAM390_GPIO_LED_RED)
 		return;
 	if (green == 0)
@@ -277,10 +277,10 @@
 	case BOOTSTAGE_ID_RUN_OS:
 		/*
 		 * set normal state
-		 * LED Red  : off
+		 * LED Red  : on
 		 * LED green: off
 		 */
-		gpio_set_value(red, LED_OFF);
+		gpio_set_value(red, LED_ON);
 		gpio_set_value(green, LED_OFF);
 		break;
 	case BOOTSTAGE_ID_MAIN_LOOP:
@@ -326,23 +326,12 @@
 	if (!bootmode)
 		if (ret == 0)
 			bootmode = 1;
-	if (bootmode) {
-		/*
-		 * Booting U-Boot
-		 * LED Red  : on
-		 * LED green: off
-		 */
-		init_led(CONFIG_IPAM390_GPIO_LED_RED, "red", LED_ON);
-		init_led(CONFIG_IPAM390_GPIO_LED_GREEN, "green", LED_OFF);
-	} else {
-		/*
-		 * Booting Linux
-		 * LED Red  : off
-		 * LED green: off
-		 */
-		init_led(CONFIG_IPAM390_GPIO_LED_RED, "red", LED_OFF);
-		init_led(CONFIG_IPAM390_GPIO_LED_GREEN, "green", LED_OFF);
-	}
+	/*
+	 * LED red  : on
+	 * LED green: off
+	 */
+	init_led(CONFIG_IPAM390_GPIO_LED_RED, "red", LED_ON);
+	init_led(CONFIG_IPAM390_GPIO_LED_GREEN, "green", LED_OFF);
 	return bootmode;
 }
 #endif