rockchip: add boot-mode support for rk3288, rk3036
rockchip platform have a protocol to pass the the kernel reboot mode to bootloader
by some special registers when system reboot. In bootloader we should read it and take action.
We can only setup boot_mode in board_late_init becasue "setenv" need env setuped.
So add CONFIG_BOARD_LATE_INIT to common header and use a entry "rk_board_late_init"
to replace "board_late_init" in board file.
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
diff --git a/arch/arm/include/asm/arch-rockchip/boot_mode.h b/arch/arm/include/asm/arch-rockchip/boot_mode.h
new file mode 100644
index 0000000..bd65f60
--- /dev/null
+++ b/arch/arm/include/asm/arch-rockchip/boot_mode.h
@@ -0,0 +1,19 @@
+#ifndef __REBOOT_MODE_H
+#define __REBOOT_MODE_H
+
+/* high 24 bits is tag, low 8 bits is type */
+#define REBOOT_FLAG 0x5242C300
+/* normal boot */
+#define BOOT_NORMAL (REBOOT_FLAG + 0)
+/* enter loader rockusb mode */
+#define BOOT_LOADER (REBOOT_FLAG + 1)
+/* enter recovery */
+#define BOOT_RECOVERY (REBOOT_FLAG + 3)
+/* enter fastboot mode */
+#define BOOT_FASTBOOT (REBOOT_FLAG + 9)
+/* enter charging mode */
+#define BOOT_CHARGING (REBOOT_FLAG + 11)
+/* enter usb mass storage mode */
+#define BOOT_UMS (REBOOT_FLAG + 12)
+
+#endif
diff --git a/arch/arm/mach-rockchip/rk3036-board.c b/arch/arm/mach-rockchip/rk3036-board.c
index b63f9c0..bf2b268 100644
--- a/arch/arm/mach-rockchip/rk3036-board.c
+++ b/arch/arm/mach-rockchip/rk3036-board.c
@@ -11,11 +11,50 @@
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/periph.h>
+#include <asm/arch/grf_rk3036.h>
+#include <asm/arch/boot_mode.h>
+#include <asm/arch/sdram_rk3036.h>
#include <asm/gpio.h>
#include <dm/pinctrl.h>
DECLARE_GLOBAL_DATA_PTR;
+#define GRF_BASE 0x20008000
+
+static void setup_boot_mode(void)
+{
+ struct rk3036_grf *const grf = (void *)GRF_BASE;
+ int boot_mode = readl(&grf->os_reg[4]);
+
+ debug("boot mode %x.\n", boot_mode);
+
+ /* Clear boot mode */
+ writel(BOOT_NORMAL, &grf->os_reg[4]);
+
+ switch (boot_mode) {
+ case BOOT_FASTBOOT:
+ printf("enter fastboot!\n");
+ setenv("preboot", "setenv preboot; fastboot usb0");
+ break;
+ case BOOT_UMS:
+ printf("enter UMS!\n");
+ setenv("preboot", "setenv preboot; ums mmc 0");
+ break;
+ }
+}
+
+__weak int rk_board_late_init(void)
+{
+ return 0;
+}
+
+int board_late_init(void)
+{
+ setup_boot_mode();
+
+ return rk_board_late_init();
+}
+
int board_init(void)
{
return 0;
diff --git a/arch/arm/mach-rockchip/rk3288-board.c b/arch/arm/mach-rockchip/rk3288-board.c
index 6c36bf9..baf9522 100644
--- a/arch/arm/mach-rockchip/rk3288-board.c
+++ b/arch/arm/mach-rockchip/rk3288-board.c
@@ -8,25 +8,65 @@
#include <clk.h>
#include <dm.h>
#include <ram.h>
+#include <syscon.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/periph.h>
+#include <asm/arch/pmu_rk3288.h>
+#include <asm/arch/boot_mode.h>
#include <asm/gpio.h>
#include <dm/pinctrl.h>
DECLARE_GLOBAL_DATA_PTR;
+#define PMU_BASE 0xff730000
+
+static void setup_boot_mode(void)
+{
+ struct rk3288_pmu *const pmu = (void *)PMU_BASE;
+ int boot_mode = readl(&pmu->sys_reg[0]);
+
+ debug("boot mode %x.\n", boot_mode);
+
+ /* Clear boot mode */
+ writel(BOOT_NORMAL, &pmu->sys_reg[0]);
+
+ switch (boot_mode) {
+ case BOOT_FASTBOOT:
+ printf("enter fastboot!\n");
+ setenv("preboot", "setenv preboot; fastboot usb0");
+ break;
+ case BOOT_UMS:
+ printf("enter UMS!\n");
+ setenv("preboot", "setenv preboot; if mmc dev 0;"
+ "then ums mmc 0; else ums mmc 1;fi");
+ break;
+ }
+}
+
+__weak int rk_board_late_init(void)
+{
+ return 0;
+}
+
+int board_late_init(void)
+{
+ setup_boot_mode();
+
+ return rk_board_late_init();
+}
+
int board_init(void)
{
#ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
struct udevice *pinctrl;
int ret;
- /*
- * We need to implement sdcard iomux here for the further
- * initlization, otherwise, it'll hit sdcard command sending
- * timeout exception.
- */
+ /*
+ * We need to implement sdcard iomux here for the further
+ * initlization, otherwise, it'll hit sdcard command sending
+ * timeout exception.
+ */
ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl);
if (ret) {
debug("%s: Cannot find pinctrl device\n", __func__);
diff --git a/board/rockchip/kylin_rk3036/kylin_rk3036.c b/board/rockchip/kylin_rk3036/kylin_rk3036.c
index 848f23d..7e2edf4 100644
--- a/board/rockchip/kylin_rk3036/kylin_rk3036.c
+++ b/board/rockchip/kylin_rk3036/kylin_rk3036.c
@@ -8,14 +8,11 @@
#include <dm.h>
#include <asm/io.h>
#include <asm/arch/uart.h>
-#include <asm/arch-rockchip/grf_rk3036.h>
#include <asm/arch/sdram_rk3036.h>
#include <asm/gpio.h>
DECLARE_GLOBAL_DATA_PTR;
-#define GRF_BASE 0x20008000
-
void get_ddr_config(struct rk3036_ddr_config *config)
{
/* K4B4G1646Q config */
@@ -43,16 +40,9 @@
#define ROCKCHIP_BOOT_MODE_FASTBOOT 0x5242C309
-int board_late_init(void)
+int rk_board_late_init(void)
{
- struct rk3036_grf * const grf = (void *)GRF_BASE;
- int boot_mode = readl(&grf->os_reg[4]);
-
- /* Clear boot mode */
- writel(0, &grf->os_reg[4]);
-
- if (boot_mode == ROCKCHIP_BOOT_MODE_FASTBOOT ||
- fastboot_key_pressed()) {
+ if (fastboot_key_pressed()) {
printf("enter fastboot!\n");
setenv("preboot", "setenv preboot; fastboot usb0");
}
diff --git a/include/configs/kylin_rk3036.h b/include/configs/kylin_rk3036.h
index 39fb239..4f0bd84 100644
--- a/include/configs/kylin_rk3036.h
+++ b/include/configs/kylin_rk3036.h
@@ -25,7 +25,4 @@
#endif
-#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_PREBOOT
-
#endif
diff --git a/include/configs/rk3036_common.h b/include/configs/rk3036_common.h
index 6ddf0d9..73830e4 100644
--- a/include/configs/rk3036_common.h
+++ b/include/configs/rk3036_common.h
@@ -113,4 +113,7 @@
BOOTENV
#endif
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_PREBOOT
+
#endif
diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h
index e8bf987..9ddfe1d 100644
--- a/include/configs/rk3288_common.h
+++ b/include/configs/rk3288_common.h
@@ -132,4 +132,7 @@
BOOTENV
#endif
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_PREBOOT
+
#endif