ARM: legoev3: set serial# env var
This sets the serial# environmet variable instead of using ATAGs on
LEGO MINDSTORMS EV3.
Also fix some nomenclature while we are touching this code (Bluetooth
address is not the same as MAC address, EEPROM version is not the same
as board version).
Signed-off-by: David Lechner <david@lechnology.com>
diff --git a/board/lego/ev3/legoev3.c b/board/lego/ev3/legoev3.c
index 51b669a..9ef3e12 100644
--- a/board/lego/ev3/legoev3.c
+++ b/board/lego/ev3/legoev3.c
@@ -13,6 +13,7 @@
*/
#include <common.h>
+#include <env.h>
#include <i2c.h>
#include <init.h>
#include <spi.h>
@@ -28,11 +29,9 @@
DECLARE_GLOBAL_DATA_PTR;
-u8 board_rev;
-
#define EEPROM_I2C_ADDR 0x50
#define EEPROM_REV_OFFSET 0x3F00
-#define EEPROM_MAC_OFFSET 0x3F06
+#define EEPROM_BDADDR_OFFSET 0x3F06
const struct pinmux_resource pinmuxes[] = {
PINMUX_ITEM(spi0_pins_base),
@@ -52,59 +51,46 @@
const int lpsc_size = ARRAY_SIZE(lpsc);
-u32 get_board_rev(void)
-{
- u8 buf[2];
-
- if (!board_rev) {
- if (i2c_read(EEPROM_I2C_ADDR, EEPROM_REV_OFFSET, 2, buf, 2)) {
- printf("\nBoard revision read failed!\n");
- } else {
- /*
- * Board rev 3 has MAC address at EEPROM_REV_OFFSET.
- * Other revisions have checksum at EEPROM_REV_OFFSET+1
- * to detect this.
- */
- if ((buf[0] ^ buf[1]) == 0xFF)
- board_rev = buf[0];
- else
- board_rev = 3;
- }
- }
-
- return board_rev;
-}
-
/*
- * The Bluetooth MAC address serves as the board serial number.
+ * The Bluetooth address serves as the board serial number.
*/
-void get_board_serial(struct tag_serialnr *serialnr)
+static void setup_serial_number(void)
{
u32 offset;
+ char serial_number[13];
u8 buf[6];
+ u8 eeprom_rev;
- if (!board_rev)
- board_rev = get_board_rev();
+ if (env_get("serial#"))
+ return;
- /* Board rev 3 has MAC address where rev should be */
- offset = (board_rev == 3) ? EEPROM_REV_OFFSET : EEPROM_MAC_OFFSET;
+ if (i2c_read(EEPROM_I2C_ADDR, EEPROM_REV_OFFSET, 2, buf, 2)) {
+ printf("\nEEPROM revision read failed!\n");
+ return;
+ }
+
+ /*
+ * EEPROM rev 3 has Bluetooth address at EEPROM_REV_OFFSET.
+ * Other revisions have checksum at EEPROM_REV_OFFSET+1
+ * to detect this.
+ */
+ if ((buf[0] ^ buf[1]) == 0xFF)
+ eeprom_rev = buf[0];
+ else
+ eeprom_rev = 3;
+
+ /* EEPROM rev 3 has Bluetooth address where rev should be */
+ offset = (eeprom_rev == 3) ? EEPROM_REV_OFFSET : EEPROM_BDADDR_OFFSET;
if (i2c_read(EEPROM_I2C_ADDR, offset, 2, buf, 6)) {
- printf("\nBoard serial read failed!\n");
- } else {
- u8 *nr;
-
- nr = (u8 *)&serialnr->low;
- nr[0] = buf[5];
- nr[1] = buf[4];
- nr[2] = buf[3];
- nr[3] = buf[2];
- nr = (u8 *)&serialnr->high;
- nr[0] = buf[1];
- nr[1] = buf[0];
- nr[2] = 0;
- nr[3] = 0;
+ printf("\nEEPROM serial read failed!\n");
+ return;
}
+
+ sprintf(serial_number, "%02X%02X%02X%02X%02X%02X",
+ buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]);
+
+ env_set("serial#", serial_number);
}
int board_early_init_f(void)
@@ -150,3 +136,10 @@
return 0;
}
+
+int board_late_init(void)
+{
+ setup_serial_number();
+
+ return 0;
+}
diff --git a/configs/legoev3_defconfig b/configs/legoev3_defconfig
index 7aff11c..fb0c4dc 100644
--- a/configs/legoev3_defconfig
+++ b/configs/legoev3_defconfig
@@ -12,6 +12,7 @@
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_BOARD_LATE_INIT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_ASKENV=y
CONFIG_CRC32_VERIFY=y
diff --git a/include/configs/legoev3.h b/include/configs/legoev3.h
index a5f7fab..ca96683 100644
--- a/include/configs/legoev3.h
+++ b/include/configs/legoev3.h
@@ -65,8 +65,6 @@
#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100)
#define CONFIG_HWCONFIG /* enable hwconfig */
#define CONFIG_CMDLINE_TAG
-#define CONFIG_REVISION_TAG
-#define CONFIG_SERIAL_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_SETUP_INITRD_TAG
#define CONFIG_BOOTCOMMAND \