ide: Convert to use log_debug()
Avoid the use of the function name in a few of the debug() calls, since
this causes a checkpatch warning. Convert all other calls too.
Use lower-case hex consistently.
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/drivers/block/ide.c b/drivers/block/ide.c
index fb40933..37236f6 100644
--- a/drivers/block/ide.c
+++ b/drivers/block/ide.c
@@ -65,8 +65,8 @@
static void ide_outb(int dev, int port, unsigned char val)
{
- debug("ide_outb (dev= %d, port= 0x%x, val= 0x%02x) : @ 0x%08lx\n",
- dev, port, val, ATA_CURR_BASE(dev) + port);
+ log_debug("(dev= %d, port= %#x, val= 0x%02x) : @ 0x%08lx\n",
+ dev, port, val, ATA_CURR_BASE(dev) + port);
outb(val, ATA_CURR_BASE(dev) + port);
}
@@ -77,8 +77,8 @@
val = inb(ATA_CURR_BASE(dev) + port);
- debug("ide_inb (dev= %d, port= 0x%x) : @ 0x%08lx -> 0x%02x\n",
- dev, port, ATA_CURR_BASE(dev) + port, val);
+ log_debug("(dev= %d, port= %#x) : @ 0x%08lx -> 0x%02x\n",
+ dev, port, ATA_CURR_BASE(dev) + port, val);
return val;
}
@@ -87,7 +87,7 @@
uintptr_t paddr = (ATA_CURR_BASE(dev) + ATA_DATA_REG);
ushort *dbuf = (ushort *)sect_buf;
- debug("in input swap data base for read is %p\n", (void *)paddr);
+ log_debug("in input swap data base for read is %p\n", (void *)paddr);
while (words--) {
EIEIO;
@@ -158,7 +158,7 @@
dbuf = (ushort *)sect_buf;
- debug("in output data shorts base for read is %p\n", (void *)paddr);
+ log_debug("in output data shorts base for read is %p\n", (void *)paddr);
while (shorts--) {
EIEIO;
@@ -173,7 +173,7 @@
dbuf = (ushort *)sect_buf;
- debug("in input data shorts base for read is %p\n", (void *)paddr);
+ log_debug("in input data shorts base for read is %p\n", (void *)paddr);
while (shorts--) {
EIEIO;
@@ -222,7 +222,7 @@
ide_outb(device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device));
c = atapi_wait_mask(device, ATAPI_TIME_OUT, mask, res);
if ((c & mask) != res) {
- printf("ATAPI_ISSUE: device %d not ready status %X\n", device,
+ printf("ATAPI_ISSUE: device %d not ready status %x\n", device,
c);
err = 0xFF;
goto AI_OUT;
@@ -268,8 +268,8 @@
if ((c & mask) != res) {
if (c & ATA_STAT_ERR) {
err = (ide_inb(device, ATA_ERROR_REG)) >> 4;
- debug("atapi_issue 1 returned sense key %X status %02X\n",
- err, c);
+ log_debug("1 returned sense key %x status %02x\n",
+ err, c);
} else {
printf("ATAPI_ISSUE: (no DRQ) after sending ccb (%x) status 0x%02x\n",
ccb[0], c);
@@ -292,20 +292,21 @@
goto AI_OUT;
}
if (n != buflen) {
- debug("WARNING, transfer bytes %d not equal with requested %d\n",
- n, buflen);
+ log_debug("WARNING, transfer bytes %d not equal with requested %d\n",
+ n, buflen);
}
if (n != 0) { /* data transfer */
- debug("ATAPI_ISSUE: %d Bytes to transfer\n", n);
+ log_debug("ATAPI_ISSUE: %d Bytes to transfer\n", n);
/* we transfer shorts */
n >>= 1;
/* ok now decide if it is an in or output */
if ((ide_inb(device, ATA_SECT_CNT) & 0x02) == 0) {
- debug("Write to device\n");
+ log_debug("Write to device\n");
ide_output_data_shorts(device, (unsigned short *)buffer,
n);
} else {
- debug("Read from device @ %p shorts %d\n", buffer, n);
+ log_debug("Read from device @ %p shorts %d\n", buffer,
+ n);
ide_input_data_shorts(device, (unsigned short *)buffer,
n);
}
@@ -316,8 +317,7 @@
c = atapi_wait_mask(device, ATAPI_TIME_OUT, mask, res);
if ((c & ATA_STAT_ERR) == ATA_STAT_ERR) {
err = (ide_inb(device, ATA_ERROR_REG) >> 4);
- debug("atapi_issue 2 returned sense key %X status %X\n", err,
- c);
+ log_debug("2 returned sense key %x status %x\n", err, c);
} else {
err = 0;
}
@@ -352,7 +352,7 @@
if (res == 0xFF)
return 0xFF; /* error */
- debug("(auto_req)atapi_issue returned sense key %X\n", res);
+ log_debug("(auto_req)atapi_issue returned sense key %x\n", res);
memset(sense_ccb, 0, sizeof(sense_ccb));
memset(sense_data, 0, sizeof(sense_data));
@@ -364,9 +364,9 @@
asc = (sense_data[12]);
ascq = (sense_data[13]);
- debug("ATAPI_CMD_REQ_SENSE returned %x\n", res);
- debug(" Sense page: %02X key %02X ASC %02X ASCQ %02X\n",
- sense_data[0], key, asc, ascq);
+ log_debug("ATAPI_CMD_REQ_SENSE returned %x\n", res);
+ log_debug(" Sense page: %02X key %02X ASC %02X ASCQ %02X\n",
+ sense_data[0], key, asc, ascq);
if ((key == 0))
return 0; /* ok device ready */
@@ -390,14 +390,14 @@
goto error;
}
if (asc == 0x3a) {
- debug("Media not present\n");
+ log_debug("Media not present\n");
goto error;
}
printf("ERROR: Unknown Sense key %02X ASC %02X ASCQ %02X\n", key, asc,
ascq);
error:
- debug("ERROR Sense key %02X ASC %02X ASCQ %02X\n", key, asc, ascq);
+ log_debug("ERROR Sense key %02X ASC %02X ASCQ %02X\n", key, asc, ascq);
return 0xFF;
}
@@ -419,8 +419,8 @@
unsigned char ccb[12]; /* Command descriptor block */
ulong cnt;
- debug("atapi_read dev %d start " LBAF " blocks " LBAF
- " buffer at %lX\n", device, blknr, blkcnt, (ulong) buffer);
+ log_debug("%d start " LBAF " blocks " LBAF " buffer at %lx\n", device,
+ blknr, blkcnt, (ulong)buffer);
do {
if (blkcnt > ATAPI_READ_MAX_BLOCK)
@@ -472,7 +472,7 @@
ccb[4] = 40; /* allocation Legnth */
c = atapi_issue_autoreq(device, ccb, 12, (unsigned char *)iobuf, 40);
- debug("ATAPI_CMD_INQUIRY returned %x\n", c);
+ log_debug("ATAPI_CMD_INQUIRY returned %x\n", c);
if (c != 0)
return;
@@ -499,7 +499,7 @@
c = atapi_issue_autoreq(device, ccb, 12, (unsigned char *)iobuf, 0);
- debug("ATAPI_CMD_START_STOP returned %x\n", c);
+ log_debug("ATAPI_CMD_START_STOP returned %x\n", c);
if (c != 0)
return;
@@ -507,7 +507,7 @@
memset(iobuf, 0, sizeof(iobuf));
c = atapi_issue_autoreq(device, ccb, 12, (unsigned char *)iobuf, 0);
- debug("ATAPI_CMD_UNIT_TEST_READY returned %x\n", c);
+ log_debug("ATAPI_CMD_UNIT_TEST_READY returned %x\n", c);
if (c != 0)
return;
@@ -515,13 +515,13 @@
memset(iobuf, 0, sizeof(iobuf));
ccb[0] = ATAPI_CMD_READ_CAP;
c = atapi_issue_autoreq(device, ccb, 12, (unsigned char *)iobuf, 8);
- debug("ATAPI_CMD_READ_CAP returned %x\n", c);
+ log_debug("ATAPI_CMD_READ_CAP returned %x\n", c);
if (c != 0)
return;
- debug("Read Cap: LBA %02X%02X%02X%02X blksize %02X%02X%02X%02X\n",
- iobuf[0], iobuf[1], iobuf[2], iobuf[3],
- iobuf[4], iobuf[5], iobuf[6], iobuf[7]);
+ log_debug("Read Cap: LBA %02X%02X%02X%02X blksize %02X%02X%02X%02X\n",
+ iobuf[0], iobuf[1], iobuf[2], iobuf[3],
+ iobuf[4], iobuf[5], iobuf[6], iobuf[7]);
desc->lba = (ulong)iobuf[0] << 24 | (ulong)iobuf[1] << 16 |
(ulong)iobuf[2] << 8 | (ulong)iobuf[3];
@@ -598,7 +598,7 @@
* Need to soft reset the device
* in case it's an ATAPI...
*/
- debug("Retrying...\n");
+ log_debug("Retrying...\n");
ide_outb(device, ATA_DEV_HD,
ATA_LBA | ATA_DEVICE(device));
mdelay(100);
@@ -707,12 +707,12 @@
if (c & (ATA_STAT_BUSY | ATA_STAT_FAULT)) {
puts("not available ");
- debug("Status = 0x%02X ", c);
+ log_debug("Status = 0x%02X ", c);
return -EIO;
} else if (IS_ENABLED(CONFIG_ATAPI) && !(c & ATA_STAT_READY)) {
/* ATAPI Devices do not set DRDY */
puts("not available ");
- debug("Status = 0x%02X ", c);
+ log_debug("Status = 0x%02X ", c);
return -EIO;
}
puts("OK ");
@@ -741,7 +741,7 @@
dbuf = (ushort *)sect_buf;
- debug("in input data base for read is %p\n", (void *)paddr);
+ log_debug("in input data base for read is %p\n", (void *)paddr);
while (words--) {
EIEIO;
@@ -766,8 +766,8 @@
lba48 = true;
}
- debug("ide_read dev %d start " LBAF ", blocks " LBAF " buffer at %lX\n",
- device, blknr, blkcnt, (ulong) buffer);
+ log_debug("dev %d start " LBAF ", blocks " LBAF " buffer at %lx\n",
+ device, blknr, blkcnt, (ulong)buffer);
/* Select device
*/
@@ -791,10 +791,10 @@
goto IDE_READ_E;
}
if ((c & ATA_STAT_ERR) == ATA_STAT_ERR) {
- printf("No Powersaving mode %X\n", c);
+ printf("No Powersaving mode %x\n", c);
} else {
c = ide_inb(device, ATA_SECT_CNT);
- debug("Powersaving %02X\n", c);
+ log_debug("Powersaving %02X\n", c);
if (c == 0)
pwrsave = 1;
}