SoC: exynos: add support for exynos 78x0
Samsung Exynos 7880 \ 7870 - SoC for mainstream smartphones and tablets
introduced on March 2017.
Features:
- 8 Cortex A53 cores
- ARM Mali-T830 MP3 GPU
- LTE Cat. 7 (7880) or 6 (7870) modem
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
diff --git a/include/configs/exynos78x0-common.h b/include/configs/exynos78x0-common.h
new file mode 100644
index 0000000..478a0c4
--- /dev/null
+++ b/include/configs/exynos78x0-common.h
@@ -0,0 +1,112 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Configuration settings for the EXYNOS 78x0 based boards.
+ *
+ * Copyright (c) 2020 Dzmitry Sankouski (dsankouski@gmail.com)
+ * based on include/exynos7420-common.h
+ * Copyright (C) 2016 Samsung Electronics
+ * Thomas Abraham <thomas.ab@samsung.com>
+ */
+
+#ifndef __CONFIG_EXYNOS78x0_COMMON_H
+#define __CONFIG_EXYNOS78x0_COMMON_H
+
+/* High Level Configuration Options */
+#define CONFIG_SAMSUNG /* in a SAMSUNG core */
+#define CONFIG_S5P
+
+#include <asm/arch/cpu.h> /* get chip and board defs */
+#include <linux/sizes.h>
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE 1024 /* Print Buffer Size */
+
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+/* Timer input clock frequency */
+#define COUNTER_FREQUENCY 26000000
+
+/* Device Tree */
+#define CONFIG_DEVICE_TREE_LIST "EXYNOS78x0-a5y17lte"
+
+#define CPU_RELEASE_ADDR secondary_boot_addr
+
+#define CONFIG_SYS_BAUDRATE_TABLE \
+ {9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600}
+
+#define CONFIG_BOARD_COMMON
+
+#define CONFIG_SYS_SDRAM_BASE 0x40000000
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + SZ_2M - GENERATED_GBL_DATA_SIZE)
+/* DRAM Memory Banks */
+#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */
+#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
+#define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE)
+#define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_3 (CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_4 (CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_5 (CONFIG_SYS_SDRAM_BASE + (4 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_5_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_6 (CONFIG_SYS_SDRAM_BASE + (5 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_6_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_7 (CONFIG_SYS_SDRAM_BASE + (6 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_7_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_8 (CONFIG_SYS_SDRAM_BASE + (7 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_8_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_9 (CONFIG_SYS_SDRAM_BASE + (8 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_9_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_10 (CONFIG_SYS_SDRAM_BASE + (9 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_10_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_11 (CONFIG_SYS_SDRAM_BASE + (10 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_11_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_12 (CONFIG_SYS_SDRAM_BASE + (11 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_12_SIZE SDRAM_BANK_SIZE
+
+#define CONFIG_DEBUG_UART_CLOCK 132710400
+
+#define CONFIG_PREBOOT \
+"echo Read pressed buttons status;" \
+"KEY_VOLUMEUP=gpa20;" \
+"KEY_HOME=gpa17;" \
+"KEY_VOLUMEDOWN=gpa21;" \
+"KEY_POWER=gpa00;" \
+"PRESSED=0;" \
+"RELEASED=1;" \
+"if gpio input $KEY_VOLUMEUP; then setenv VOLUME_UP $PRESSED; " \
+"else setenv VOLUME_UP $RELEASED; fi;" \
+"if gpio input $KEY_VOLUMEDOWN; then setenv VOLUME_DOWN $PRESSED; " \
+"else setenv VOLUME_DOWN $RELEASED; fi;" \
+"if gpio input $KEY_HOME; then setenv HOME $PRESSED; else setenv HOME $RELEASED; fi;" \
+"if gpio input $KEY_POWER; then setenv POWER $PRESSED; else setenv POWER $RELEASED; fi;"
+
+#ifndef MEM_LAYOUT_ENV_SETTINGS
+#define MEM_LAYOUT_ENV_SETTINGS \
+ "bootm_size=0x10000000\0" \
+ "bootm_low=0x40000000\0"
+#endif
+
+#ifndef EXYNOS_DEVICE_SETTINGS
+#define EXYNOS_DEVICE_SETTINGS \
+ "stdin=serial\0" \
+ "stdout=serial\0" \
+ "stderr=serial\0"
+#endif
+
+#ifndef EXYNOS_FDTFILE_SETTING
+#define EXYNOS_FDTFILE_SETTING
+#endif
+
+#define EXTRA_ENV_SETTINGS \
+ EXYNOS_DEVICE_SETTINGS \
+ EXYNOS_FDTFILE_SETTING \
+ MEM_LAYOUT_ENV_SETTINGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ EXTRA_ENV_SETTINGS
+
+#endif /* __CONFIG_EXYNOS78x0_COMMON_H */