sh: MS7750SE support.
This adds support for the Hitachi MS7750SE.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
diff --git a/Makefile b/Makefile
index 1a9b3d2..6001d1d 100644
--- a/Makefile
+++ b/Makefile
@@ -2408,6 +2408,18 @@
#########################################################################
#########################################################################
+#########################################################################
+## sh4 (Renesas SuperH)
+#########################################################################
+ms7750se_config: unconfig
+ @ >include/config.h
+ @echo "#define CONFIG_MS7750SE 1" >> include/config.h
+ @./mkconfig -a $(@:_config=) sh sh4 ms7750se
+
+#########################################################################
+#########################################################################
+#########################################################################
+
clean:
find $(OBJTREE) -type f \
\( -name 'core' -o -name '*.bak' -o -name '*~' \
diff --git a/board/ms7750se/Makefile b/board/ms7750se/Makefile
new file mode 100644
index 0000000..f81d56c
--- /dev/null
+++ b/board/ms7750se/Makefile
@@ -0,0 +1,43 @@
+#
+# Copyright (C) 2007
+# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS := ms7750se.o
+SOBJS := lowlevel_init.o
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#################################################################
diff --git a/board/ms7750se/config.mk b/board/ms7750se/config.mk
new file mode 100644
index 0000000..1eed580
--- /dev/null
+++ b/board/ms7750se/config.mk
@@ -0,0 +1,23 @@
+#
+# Copyright (C) 2007
+# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#
+# NOTE: Must match value used in u-boot.lds (in this directory).
+#
+TEXT_BASE = 0x8FFC0000
diff --git a/board/ms7750se/lowlevel_init.S b/board/ms7750se/lowlevel_init.S
new file mode 100644
index 0000000..056c691
--- /dev/null
+++ b/board/ms7750se/lowlevel_init.S
@@ -0,0 +1,169 @@
+/*
+ modified from SH-IPL+g
+ Renesaso SuperH Solution Enginge MS775x BSC setting
+ Coyright (c) 2007 Nobuhiro Iwamatsu
+*/
+
+#include <config.h>
+#include <version.h>
+
+#include <asm/processor.h>
+
+#ifdef CONFIG_CPU_SUBTYPE_SH7751
+#define BCR2_D_VALUE 0x2FFC /* Area 1-6 width: 32/32/32/32/32/16 */
+#define WCR1_D_VALUE 0x02770771 /* DMA:0 A6:2 A3:0 A0:1 Others:15 */
+#ifdef CONFIG_MRSHPC
+#define WCR2_D_VALUE 0xFFFE4FE7 /* A6:15 A6B:7 A5:15 A5B:7 A4:15
+ A3:2 A2:15 A1:15 A0:6 A0B:7 */
+#else /* CONFIG_MRSHPC*/
+#define WCR2_D_VALUE 0x7FFE4FE7 /* A6:3 A6B:7 A5:15 A5B:7 A4:15
+ A3:2 A2:15 A1:15 A0:6 A0B:7 */
+#endif /* CONFIG_MRSHPC */
+#define WCR3_D_VALUE 0x01777771 /* A6: 0-1 A5: 1-3 A4: 1-3 A3: 1-3
+ A2: 1-3 A1: 1-3 A0: 0-1 */
+#define LED_ADDRESS 0xBA000000 /* Address of LED register */
+#define RTCOR_D_VALUE 0xA50D /* Write code A5, data 0D (~15us?) */
+#define SDMR3_ADDRESS 0xFF940088 /* SDMR3 address on 32-bit bus */
+#define MCR_D1_VALUE 0x100901B4 /* SDRAM 32-bit, CAS/RAS Refresh, ... */
+#define MCR_D2_VALUE 0x500901B4 /* Same w/MRSET now 1 (mode reg cmd) */
+#define SWITCH_ADDR 0xB9000000 /* Address of DIP switches */
+#else /* CONFIG_CPU_SUBTYPE_SH7751 */
+#define BCR2_D_VALUE 0x2E3C /* Area 1-6 width: 32/32/64/16/32/16 */
+#define WCR1_D_VALUE 0x02720777 /* DMA:0 A6:2 A4:2 A3:0 Others:15 */
+#define WCR2_D_VALUE 0xFFFE4FFF /* A6:15 A6B:7 A5:15 A5B:7 A4:15
+ A3:2 A2:15 A1:15 A0:15 A0B:7 */
+#define WCR3_D_VALUE 0x01717771 /* A6: 0-1 A5: 1-3 A4: 0-1 A3: 1-3
+ A2: 1-3 A1: 1-3 A0: 0-1 */
+#define LED_ADDRESS 0xB0C00000 /* Address of LED register */
+#define RTCOR_D_VALUE 0xA510 /* Write code A5, data 10 (~15us?) */
+#define SDMR3_ADDRESS 0xFF940110 /* SDMR3 address on 64-bit bus */
+#define MCR_D1_VALUE 0x8801001C /* SDRAM 64-bit, CAS/RAS Refresh, ... */
+#define MCR_D2_VALUE 0xC801001C /* Same w/MRSET now 1 (mode reg cmd) */
+#define SWITCH_ADDR 0xb0800000 /* Address of DIP switches */
+#endif /* CONFIG_CPU_SUBTYPE_SH7751 */
+
+ .global lowlevel_init
+ .text
+ .align 2
+
+lowlevel_init:
+
+ mov.l L_CCR, r1 ! CCR Address
+ mov.l L_CCR_DISABLE, r0 ! CCR Data
+ mov.l r0, @r1
+
+init_bsc:
+ mov.l FRQCR_A,r1 /* FRQCR Address */
+ mov.l FRQCR_D,r0 /* FRQCR Data */
+ mov.w r0,@r1
+
+ mov.l BCR1_A,r1 /* BCR1 Address */
+ mov.l BCR1_D,r0 /* BCR1 Data */
+ mov.l r0,@r1
+
+ mov.l BCR2_A,r1 /* BCR2 Address */
+ mov.l BCR2_D,r0 /* BCR2 Data */
+ mov.w r0,@r1
+
+ mov.l WCR1_A,r1 /* WCR1 Address */
+ mov.l WCR1_D,r0 /* WCR1 Data */
+ mov.l r0,@r1
+
+ mov.l WCR2_A,r1 /* WCR2 Address */
+ mov.l WCR2_D,r0 /* WCR2 Data */
+ mov.l r0,@r1
+
+ mov.l WCR3_A,r1 /* WCR3 Address */
+ mov.l WCR3_D,r0 /* WCR3 Data */
+ mov.l r0,@r1
+
+ mov.l LED_A,r1 /* LED Address */
+ mov #0xff,r0 /* LED ALL 'on' */
+ shll8 r0
+ mov.w r0,@r1
+
+ mov.l MCR_A,r1 /* MCR Address */
+ mov.l MCR_D1,r0 /* MCR Data1 */
+ mov.l r0,@r1
+
+ mov.l SDMR3_A,r1 /* Set SDRAM mode */
+ mov #0,r0
+ mov.b r0,@r1
+
+ ! Do you need PCMCIA setting?
+ ! If so, please add the lines here...
+
+ mov.l RTCNT_A,r1 /* RTCNT Address */
+ mov.l RTCNT_D,r0 /* RTCNT Data */
+ mov.w r0,@r1
+
+ mov.l RTCOR_A,r1 /* RTCOR Address */
+ mov.l RTCOR_D,r0 /* RTCOR Data */
+ mov.w r0,@r1
+
+ mov.l RTCSR_A,r1 /* RTCSR Address */
+ mov.l RTCSR_D,r0 /* RTCSR Data */
+ mov.w r0,@r1
+
+ mov.l RFCR_A,r1 /* RFCR Address */
+ mov.l RFCR_D,r0 /* RFCR Data */
+ mov.w r0,@r1 /* Clear reflesh counter */
+ /* Wait DRAM refresh 30 times */
+ mov #30,r3
+1:
+ mov.w @r1,r0
+ extu.w r0,r2
+ cmp/hi r3,r2
+ bf 1b
+
+ mov.l MCR_A,r1 /* MCR Address */
+ mov.l MCR_D2,r0 /* MCR Data2 */
+ mov.l r0,@r1
+
+ mov.l SDMR3_A,r1 /* Set SDRAM mode */
+ mov #0,r0
+ mov.b r0,@r1
+
+ rts
+ nop
+
+ .align 2
+
+L_CCR: .long CCR
+L_CCR_DISABLE: .long 0x0808
+FRQCR_A: .long FRQCR
+FRQCR_D:
+#ifdef CONFIG_CPU_SUBTYPE_SH_R
+ .long 0x00000e1a /* 12:3:3 */
+#else
+#ifdef CONFIG_GOOD_SESH4
+ .long 0x00000e13 /* 6:2:1 */
+#else
+ .long 0x00000e23 /* 6:1:1 */
+#endif
+#endif /* CONFIG_CPU_SUBTYPE_SH_R */
+
+BCR1_A: .long BCR1
+BCR1_D: .long 0x00000008 /* Area 3 SDRAM */
+BCR2_A: .long BCR2
+BCR2_D: .long BCR2_D_VALUE /* Bus width settings */
+WCR1_A: .long WCR1
+WCR1_D: .long WCR1_D_VALUE /* Inter-area or turnaround wait states */
+WCR2_A: .long WCR2
+WCR2_D: .long WCR2_D_VALUE /* Per-area access and burst wait states */
+WCR3_A: .long WCR3
+WCR3_D: .long WCR3_D_VALUE /* Address setup and data hold cycles */
+LED_A: .long LED_ADDRESS /* LED Address */
+RTCSR_A: .long RTCSR
+RTCSR_D: .long 0xA518 /* RTCSR Write Code A5h Data 18h */
+RTCNT_A: .long RTCNT
+RTCNT_D: .long 0xA500 /* RTCNT Write Code A5h Data 00h */
+RTCOR_A: .long RTCOR
+RTCOR_D: .long RTCOR_D_VALUE /* Set refresh time (about 15us) */
+SDMR3_A: .long SDMR3_ADDRESS
+MCR_A: .long MCR
+MCR_D1: .long MCR_D1_VALUE
+MCR_D2: .long MCR_D2_VALUE
+RFCR_A: .long RFCR
+RFCR_D: .long 0xA400 /* RFCR Write Code A4h Data 00h */
+
diff --git a/board/ms7750se/ms7750se.c b/board/ms7750se/ms7750se.c
new file mode 100644
index 0000000..4b4697b
--- /dev/null
+++ b/board/ms7750se/ms7750se.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2007
+ * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+
+int checkboard(void)
+{
+ puts("BOARD: SH7750 Solution Engine\n");
+ return 0;
+}
+
+int board_init(void)
+{
+ return 0;
+}
+
+int dram_init (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ gd->bd->bi_memstart = CFG_SDRAM_BASE;
+ gd->bd->bi_memsize = CFG_SDRAM_SIZE;
+ printf("DRAM: %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024));
+ return 0;
+}
+
+int board_late_init(void)
+{
+ return 0;
+}
diff --git a/board/ms7750se/u-boot.lds b/board/ms7750se/u-boot.lds
new file mode 100644
index 0000000..24c2184
--- /dev/null
+++ b/board/ms7750se/u-boot.lds
@@ -0,0 +1,106 @@
+/*
+ * Copyrigth (c) 2007
+ * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
+OUTPUT_ARCH(sh)
+ENTRY(_start)
+
+SECTIONS
+{
+ /*
+ Base address of internal SDRAM is 0x0C000000.
+ Although size of SDRAM can be either 16 or 32 MBytes,
+ we assume 16 MBytes (ie ignore upper half if the full
+ 32 MBytes is present).
+
+ NOTE: This address must match with the definition of
+ TEXT_BASE in config.mk (in this directory).
+
+ */
+ . = 0x8C000000 + (64*1024*1024) - (256*1024);
+
+ PROVIDE (reloc_dst = .);
+
+ PROVIDE (_ftext = .);
+ PROVIDE (_fcode = .);
+ PROVIDE (_start = .);
+
+ .text :
+ {
+ cpu/sh4/start.o (.text)
+ . = ALIGN(8192);
+ common/environment.o (.ppcenv)
+ . = ALIGN(8192);
+ common/environment.o (.ppcenvr)
+ . = ALIGN(8192);
+ *(.text)
+ . = ALIGN(4);
+ } =0xFF
+ PROVIDE (_ecode = .);
+ .rodata :
+ {
+ *(.rodata)
+ . = ALIGN(4);
+ }
+ PROVIDE (_etext = .);
+
+
+ PROVIDE (_fdata = .);
+ .data :
+ {
+ *(.data)
+ . = ALIGN(4);
+ }
+ PROVIDE (_edata = .);
+
+ PROVIDE (_fgot = .);
+ .got :
+ {
+ *(.got)
+ . = ALIGN(4);
+ }
+ PROVIDE (_egot = .);
+
+ PROVIDE (__u_boot_cmd_start = .);
+ .u_boot_cmd :
+ {
+ *(.u_boot_cmd)
+ . = ALIGN(4);
+ }
+ PROVIDE (__u_boot_cmd_end = .);
+
+ PROVIDE (reloc_dst_end = .);
+ /* _reloc_dst_end = .; */
+
+ PROVIDE (bss_start = .);
+ PROVIDE (__bss_start = .);
+ .bss :
+ {
+ *(.bss)
+ . = ALIGN(4);
+ }
+ PROVIDE (bss_end = .);
+
+ PROVIDE (_end = .);
+}
+
diff --git a/include/configs/ms7750se.h b/include/configs/ms7750se.h
new file mode 100644
index 0000000..0467a5e
--- /dev/null
+++ b/include/configs/ms7750se.h
@@ -0,0 +1,75 @@
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#undef DEBUG
+
+#define CONFIG_SH 1
+#define CONFIG_SH4 1
+#define CONFIG_CPU_SH7750 1
+#define CONFIG_MS7750SE 1
+#define __LITTLE_ENDIAN__ 1
+
+//#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_NET |CFG_CMD_PING)
+#define CONFIG_COMMANDS CONFIG_CMD_DFL & ~CFG_CMD_NET
+
+#define CFG_SCIF_CONSOLE 1
+#define CONFIG_BAUDRATE 38400
+#define CONFIG_CONS_SCIF1 1
+#define BOARD_LATE_INIT 1
+
+#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTDELAY -1
+#define CONFIG_BOOTARGS "console=ttySC0,115200"
+#define CONFIG_ENV_OVERWRITE 1
+
+#define CFG_SDRAM_BASE (0x8C000000)
+#define CFG_SDRAM_SIZE (64 * 1024 * 1024)
+
+#define CFG_LONGHELP
+#define CFG_PROMPT "=> "
+#define CFG_CBSIZE 256
+#define CFG_PBSIZE 256
+#define CFG_MAXARGS 16
+#define CFG_BARGSIZE 512
+#define CFG_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 } /* List of legal baudrate settings for this board */
+
+#define CFG_MEMTEST_START (CFG_SDRAM_BASE)
+#define CFG_MEMTEST_END (TEXT_BASE - 0x100000)
+
+
+#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 4 * 1024 * 1024)
+#define CFG_MONITOR_BASE (CFG_FLASH_BASE) /* Address of u-boot image in Flash */
+#define CFG_MONITOR_LEN (128 * 1024)
+#define CFG_MALLOC_LEN (256 * 1024) /* Size of DRAM reserved for malloc() use */
+
+#define CFG_GBL_DATA_SIZE (256) /* size in bytes reserved for initial data */
+#define CFG_BOOTMAPSZ (8 * 1024 * 1024)
+#define CFG_RX_ETH_BUFFER (8)
+
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER
+#undef CFG_FLASH_CFI_BROKEN_TABLE
+#undef CFG_FLASH_QUIET_TEST
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+
+#define CFG_FLASH_BASE (0xA1000000)
+#define CFG_MAX_FLASH_BANKS (1) /* Max number of
+ * Flash memory banks
+ */
+#define CFG_MAX_FLASH_SECT 142
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+
+#define CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE 0x20000
+#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE)
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#define CFG_FLASH_ERASE_TOUT 120000
+#define CFG_FLASH_WRITE_TOUT 500
+
+#define CONFIG_SYS_CLK_FREQ 33333333
+#define TMU_CLK_DIVIDER 4
+#define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define CFG_PLL_SETTLING_TIME 100 /* in us */
+
+#endif /* __CONFIG_H */