pci: add CONFIG_PCI_ENUM_ONLY for platforms that don't need PCI setup done
Introduce CONFIG_PCI_ENUM_ONLY variable for platforms that just want a
quick enumberation of the PCI devices, but don't need any setup work done.
This is very beneficial on platforms that have u-boot loaded by another
boot loader which does a more sophisticated job of setup of PCI devices
than u-boot. That way, u-boot can just read what's there and get on
with life. This is what SeaBIOS does.
Signed-off-by: Andrew Sharp <andywyse6@gmail.com>
diff --git a/drivers/pci/pci_auto.c b/drivers/pci/pci_auto.c
index 9a42ede..ae61e24 100644
--- a/drivers/pci/pci_auto.c
+++ b/drivers/pci/pci_auto.c
@@ -90,12 +90,14 @@
struct pci_region *io)
{
pci_addr_t bar_response;
- pci_addr_t bar_value;
pci_size_t bar_size;
u16 cmdstat = 0;
- struct pci_region *bar_res;
int bar, bar_nr = 0;
+#ifndef CONFIG_PCI_ENUM_ONLY
+ pci_addr_t bar_value;
+ struct pci_region *bar_res;
int found_mem64 = 0;
+#endif
pci_hose_read_config_word(hose, dev, PCI_COMMAND, &cmdstat);
cmdstat = (cmdstat & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) | PCI_COMMAND_MASTER;
@@ -103,20 +105,26 @@
for (bar = PCI_BASE_ADDRESS_0;
bar < PCI_BASE_ADDRESS_0 + (bars_num * 4); bar += 4) {
/* Tickle the BAR and get the response */
+#ifndef CONFIG_PCI_ENUM_ONLY
pci_hose_write_config_dword(hose, dev, bar, 0xffffffff);
+#endif
pci_hose_read_config_dword(hose, dev, bar, &bar_response);
/* If BAR is not implemented go to the next BAR */
if (!bar_response)
continue;
+#ifndef CONFIG_PCI_ENUM_ONLY
found_mem64 = 0;
+#endif
/* Check the BAR type and set our address mask */
if (bar_response & PCI_BASE_ADDRESS_SPACE) {
bar_size = ((~(bar_response & PCI_BASE_ADDRESS_IO_MASK))
& 0xffff) + 1;
+#ifndef CONFIG_PCI_ENUM_ONLY
bar_res = io;
+#endif
DEBUGF("PCI Autoconfig: BAR %d, I/O, size=0x%llx, ", bar_nr, (u64)bar_size);
} else {
@@ -124,26 +132,34 @@
PCI_BASE_ADDRESS_MEM_TYPE_64) {
u32 bar_response_upper;
u64 bar64;
+
+#ifndef CONFIG_PCI_ENUM_ONLY
pci_hose_write_config_dword(hose, dev, bar + 4,
0xffffffff);
+#endif
pci_hose_read_config_dword(hose, dev, bar + 4,
&bar_response_upper);
bar64 = ((u64)bar_response_upper << 32) | bar_response;
bar_size = ~(bar64 & PCI_BASE_ADDRESS_MEM_MASK) + 1;
+#ifndef CONFIG_PCI_ENUM_ONLY
found_mem64 = 1;
+#endif
} else {
bar_size = (u32)(~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1);
}
+#ifndef CONFIG_PCI_ENUM_ONLY
if (prefetch && (bar_response & PCI_BASE_ADDRESS_MEM_PREFETCH))
bar_res = prefetch;
else
bar_res = mem;
+#endif
DEBUGF("PCI Autoconfig: BAR %d, Mem, size=0x%llx, ", bar_nr, (u64)bar_size);
}
+#ifndef CONFIG_PCI_ENUM_ONLY
if (pciauto_region_allocate(bar_res, bar_size, &bar_value) == 0) {
/* Write it out and update our limit */
pci_hose_write_config_dword(hose, dev, bar, (u32)bar_value);
@@ -162,9 +178,10 @@
#endif
}
- cmdstat |= (bar_response & PCI_BASE_ADDRESS_SPACE) ?
- PCI_COMMAND_IO : PCI_COMMAND_MEMORY;
}
+#endif
+ cmdstat |= (bar_response & PCI_BASE_ADDRESS_SPACE) ?
+ PCI_COMMAND_IO : PCI_COMMAND_MEMORY;
DEBUGF("\n");
@@ -357,12 +374,6 @@
pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class);
switch (class) {
- case PCI_CLASS_PROCESSOR_POWERPC: /* an agent or end-point */
- DEBUGF("PCI AutoConfig: Found PowerPC device\n");
- pciauto_setup_device(hose, dev, 6, hose->pci_mem,
- hose->pci_prefetch, hose->pci_io);
- break;
-
case PCI_CLASS_BRIDGE_PCI:
hose->current_busno++;
pciauto_setup_device(hose, dev, 2, hose->pci_mem,
@@ -429,6 +440,10 @@
hose->pci_prefetch, hose->pci_io);
break;
#endif
+
+ case PCI_CLASS_PROCESSOR_POWERPC: /* an agent or end-point */
+ DEBUGF("PCI AutoConfig: Found PowerPC device\n");
+
default:
pciauto_setup_device(hose, dev, 6, hose->pci_mem,
hose->pci_prefetch, hose->pci_io);