ARM: uniphier: move PLL init code to U-Boot proper where possible
The PLL for the DRAM interface must be initialized in SPL, but the
others can be delayed until U-Boot proper. Move them from SPL to
U-Boot proper to save the precious SPL memory footprint.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
diff --git a/arch/arm/mach-uniphier/board_init.c b/arch/arm/mach-uniphier/board_init.c
index c9d3f28..a1c7541 100644
--- a/arch/arm/mach-uniphier/board_init.c
+++ b/arch/arm/mach-uniphier/board_init.c
@@ -65,6 +65,7 @@
case SOC_UNIPHIER_SLD3:
uniphier_nand_pin_init(true);
led_puts("U1");
+ uniphier_sld3_pll_init();
uniphier_ld4_clk_init();
break;
#endif
@@ -72,6 +73,7 @@
case SOC_UNIPHIER_LD4:
uniphier_nand_pin_init(true);
led_puts("U1");
+ uniphier_ld4_pll_init();
uniphier_ld4_clk_init();
break;
#endif
@@ -79,6 +81,7 @@
case SOC_UNIPHIER_PRO4:
uniphier_nand_pin_init(false);
led_puts("U1");
+ uniphier_pro4_pll_init();
uniphier_pro4_clk_init();
break;
#endif
@@ -86,6 +89,7 @@
case SOC_UNIPHIER_SLD8:
uniphier_nand_pin_init(true);
led_puts("U1");
+ uniphier_ld4_pll_init();
uniphier_ld4_clk_init();
break;
#endif
diff --git a/arch/arm/mach-uniphier/clk/Makefile b/arch/arm/mach-uniphier/clk/Makefile
index 1428e0c..b722781 100644
--- a/arch/arm/mach-uniphier/clk/Makefile
+++ b/arch/arm/mach-uniphier/clk/Makefile
@@ -2,10 +2,10 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_ARCH_UNIPHIER_SLD3) += clk-ld4.o
-obj-$(CONFIG_ARCH_UNIPHIER_LD4) += clk-ld4.o
-obj-$(CONFIG_ARCH_UNIPHIER_PRO4) += clk-pro4.o
-obj-$(CONFIG_ARCH_UNIPHIER_SLD8) += clk-ld4.o
+obj-$(CONFIG_ARCH_UNIPHIER_SLD3) += clk-ld4.o pll-sld3.o dpll-tail.o
+obj-$(CONFIG_ARCH_UNIPHIER_LD4) += clk-ld4.o pll-ld4.o dpll-tail.o
+obj-$(CONFIG_ARCH_UNIPHIER_PRO4) += clk-pro4.o pll-pro4.o dpll-tail.o
+obj-$(CONFIG_ARCH_UNIPHIER_SLD8) += clk-ld4.o pll-ld4.o dpll-tail.o
obj-$(CONFIG_ARCH_UNIPHIER_PRO5) += clk-pro5.o
obj-$(CONFIG_ARCH_UNIPHIER_PXS2) += clk-pxs2.o
obj-$(CONFIG_ARCH_UNIPHIER_LD6B) += clk-pxs2.o
diff --git a/arch/arm/mach-uniphier/clk/dpll-tail.c b/arch/arm/mach-uniphier/clk/dpll-tail.c
new file mode 100644
index 0000000..2b88490
--- /dev/null
+++ b/arch/arm/mach-uniphier/clk/dpll-tail.c
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2011-2014 Panasonic Corporation
+ * Copyright (C) 2015-2016 Socionext Inc.
+ * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/io.h>
+
+#include "../sc-regs.h"
+#include "pll.h"
+
+void uniphier_ld4_dpll_ssc_en(void)
+{
+ u32 tmp;
+
+ tmp = readl(SC_DPLLCTRL);
+ tmp |= SC_DPLLCTRL_SSC_EN;
+ writel(tmp, SC_DPLLCTRL);
+}
diff --git a/arch/arm/mach-uniphier/clk/pll-ld4.c b/arch/arm/mach-uniphier/clk/pll-ld4.c
new file mode 100644
index 0000000..13257e4
--- /dev/null
+++ b/arch/arm/mach-uniphier/clk/pll-ld4.c
@@ -0,0 +1,153 @@
+/*
+ * Copyright (C) 2013-2014 Panasonic Corporation
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/io.h>
+
+#include "../init.h"
+#include "../sc-regs.h"
+#include "../sg-regs.h"
+#include "pll.h"
+
+static void upll_init(void)
+{
+ u32 tmp, clk_mode_upll, clk_mode_axosel;
+
+ tmp = readl(SG_PINMON0);
+ clk_mode_upll = tmp & SG_PINMON0_CLK_MODE_UPLLSRC_MASK;
+ clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
+
+ /* set 0 to SNRT(UPLLCTRL.bit28) and K_LD(UPLLCTRL.bit[27]) */
+ tmp = readl(SC_UPLLCTRL);
+ tmp &= ~0x18000000;
+ writel(tmp, SC_UPLLCTRL);
+
+ if (clk_mode_upll == SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT) {
+ if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U ||
+ clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) {
+ /* AXO: 25MHz */
+ tmp &= ~0x07ffffff;
+ tmp |= 0x0228f5c0;
+ } else {
+ /* AXO: default 24.576MHz */
+ tmp &= ~0x07ffffff;
+ tmp |= 0x02328000;
+ }
+ }
+
+ writel(tmp, SC_UPLLCTRL);
+
+ /* set 1 to K_LD(UPLLCTRL.bit[27]) */
+ tmp |= 0x08000000;
+ writel(tmp, SC_UPLLCTRL);
+
+ /* wait 10 usec */
+ udelay(10);
+
+ /* set 1 to SNRT(UPLLCTRL.bit[28]) */
+ tmp |= 0x10000000;
+ writel(tmp, SC_UPLLCTRL);
+}
+
+static void vpll_init(void)
+{
+ u32 tmp, clk_mode_axosel;
+
+ tmp = readl(SG_PINMON0);
+ clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
+
+ /* set 1 to VPLA27WP and VPLA27WP */
+ tmp = readl(SC_VPLL27ACTRL);
+ tmp |= 0x00000001;
+ writel(tmp, SC_VPLL27ACTRL);
+ tmp = readl(SC_VPLL27BCTRL);
+ tmp |= 0x00000001;
+ writel(tmp, SC_VPLL27BCTRL);
+
+ /* Set 0 to VPLA_K_LD and VPLB_K_LD */
+ tmp = readl(SC_VPLL27ACTRL3);
+ tmp &= ~0x10000000;
+ writel(tmp, SC_VPLL27ACTRL3);
+ tmp = readl(SC_VPLL27BCTRL3);
+ tmp &= ~0x10000000;
+ writel(tmp, SC_VPLL27BCTRL3);
+
+ /* Set 0 to VPLA_SNRST and VPLB_SNRST */
+ tmp = readl(SC_VPLL27ACTRL2);
+ tmp &= ~0x10000000;
+ writel(tmp, SC_VPLL27ACTRL2);
+ tmp = readl(SC_VPLL27BCTRL2);
+ tmp &= ~0x10000000;
+ writel(tmp, SC_VPLL27BCTRL2);
+
+ /* Set 0x20 to VPLA_SNRST and VPLB_SNRST */
+ tmp = readl(SC_VPLL27ACTRL2);
+ tmp &= ~0x0000007f;
+ tmp |= 0x00000020;
+ writel(tmp, SC_VPLL27ACTRL2);
+ tmp = readl(SC_VPLL27BCTRL2);
+ tmp &= ~0x0000007f;
+ tmp |= 0x00000020;
+ writel(tmp, SC_VPLL27BCTRL2);
+
+ if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U ||
+ clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) {
+ /* AXO: 25MHz */
+ tmp = readl(SC_VPLL27ACTRL3);
+ tmp &= ~0x000fffff;
+ tmp |= 0x00066664;
+ writel(tmp, SC_VPLL27ACTRL3);
+ tmp = readl(SC_VPLL27BCTRL3);
+ tmp &= ~0x000fffff;
+ tmp |= 0x00066664;
+ writel(tmp, SC_VPLL27BCTRL3);
+ } else {
+ /* AXO: default 24.576MHz */
+ tmp = readl(SC_VPLL27ACTRL3);
+ tmp &= ~0x000fffff;
+ tmp |= 0x000f5800;
+ writel(tmp, SC_VPLL27ACTRL3);
+ tmp = readl(SC_VPLL27BCTRL3);
+ tmp &= ~0x000fffff;
+ tmp |= 0x000f5800;
+ writel(tmp, SC_VPLL27BCTRL3);
+ }
+
+ /* Set 1 to VPLA_K_LD and VPLB_K_LD */
+ tmp = readl(SC_VPLL27ACTRL3);
+ tmp |= 0x10000000;
+ writel(tmp, SC_VPLL27ACTRL3);
+ tmp = readl(SC_VPLL27BCTRL3);
+ tmp |= 0x10000000;
+ writel(tmp, SC_VPLL27BCTRL3);
+
+ /* wait 10 usec */
+ udelay(10);
+
+ /* Set 0 to VPLA_SNRST and VPLB_SNRST */
+ tmp = readl(SC_VPLL27ACTRL2);
+ tmp |= 0x10000000;
+ writel(tmp, SC_VPLL27ACTRL2);
+ tmp = readl(SC_VPLL27BCTRL2);
+ tmp |= 0x10000000;
+ writel(tmp, SC_VPLL27BCTRL2);
+
+ /* set 0 to VPLA27WP and VPLA27WP */
+ tmp = readl(SC_VPLL27ACTRL);
+ tmp &= ~0x00000001;
+ writel(tmp, SC_VPLL27ACTRL);
+ tmp = readl(SC_VPLL27BCTRL);
+ tmp |= ~0x00000001;
+ writel(tmp, SC_VPLL27BCTRL);
+}
+
+void uniphier_ld4_pll_init(void)
+{
+ upll_init();
+ vpll_init();
+ uniphier_ld4_dpll_ssc_en();
+}
diff --git a/arch/arm/mach-uniphier/clk/pll-pro4.c b/arch/arm/mach-uniphier/clk/pll-pro4.c
new file mode 100644
index 0000000..cdd1fd4
--- /dev/null
+++ b/arch/arm/mach-uniphier/clk/pll-pro4.c
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2013-2014 Panasonic Corporation
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/io.h>
+
+#include "../init.h"
+#include "../sc-regs.h"
+#include "../sg-regs.h"
+#include "pll.h"
+
+static void vpll_init(void)
+{
+ u32 tmp, clk_mode_axosel;
+
+ /* Set VPLL27A & VPLL27B */
+ tmp = readl(SG_PINMON0);
+ clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
+
+ /* 25MHz or 6.25MHz is default for Pro4R, no need to set VPLLA/B */
+ if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ ||
+ clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ)
+ return;
+
+ /* Disable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */
+ tmp = readl(SC_VPLL27ACTRL);
+ tmp |= 0x00000001;
+ writel(tmp, SC_VPLL27ACTRL);
+ tmp = readl(SC_VPLL27BCTRL);
+ tmp |= 0x00000001;
+ writel(tmp, SC_VPLL27BCTRL);
+
+ /* Unset VPLA_K_LD and VPLB_K_LD bit */
+ tmp = readl(SC_VPLL27ACTRL3);
+ tmp &= ~0x10000000;
+ writel(tmp, SC_VPLL27ACTRL3);
+ tmp = readl(SC_VPLL27BCTRL3);
+ tmp &= ~0x10000000;
+ writel(tmp, SC_VPLL27BCTRL3);
+
+ /* Set VPLA_M and VPLB_M to 0x20 */
+ tmp = readl(SC_VPLL27ACTRL2);
+ tmp &= ~0x0000007f;
+ tmp |= 0x00000020;
+ writel(tmp, SC_VPLL27ACTRL2);
+ tmp = readl(SC_VPLL27BCTRL2);
+ tmp &= ~0x0000007f;
+ tmp |= 0x00000020;
+ writel(tmp, SC_VPLL27BCTRL2);
+
+ if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ ||
+ clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ) {
+ /* Set VPLA_K and VPLB_K for AXO: 25MHz */
+ tmp = readl(SC_VPLL27ACTRL3);
+ tmp &= ~0x000fffff;
+ tmp |= 0x00066666;
+ writel(tmp, SC_VPLL27ACTRL3);
+ tmp = readl(SC_VPLL27BCTRL3);
+ tmp &= ~0x000fffff;
+ tmp |= 0x00066666;
+ writel(tmp, SC_VPLL27BCTRL3);
+ } else {
+ /* Set VPLA_K and VPLB_K for AXO: 24.576 MHz */
+ tmp = readl(SC_VPLL27ACTRL3);
+ tmp &= ~0x000fffff;
+ tmp |= 0x000f5800;
+ writel(tmp, SC_VPLL27ACTRL3);
+ tmp = readl(SC_VPLL27BCTRL3);
+ tmp &= ~0x000fffff;
+ tmp |= 0x000f5800;
+ writel(tmp, SC_VPLL27BCTRL3);
+ }
+
+ /* wait 1 usec */
+ udelay(1);
+
+ /* Set VPLA_K_LD and VPLB_K_LD to load K parameters */
+ tmp = readl(SC_VPLL27ACTRL3);
+ tmp |= 0x10000000;
+ writel(tmp, SC_VPLL27ACTRL3);
+ tmp = readl(SC_VPLL27BCTRL3);
+ tmp |= 0x10000000;
+ writel(tmp, SC_VPLL27BCTRL3);
+
+ /* Unset VPLA_SNRST and VPLB_SNRST bit */
+ tmp = readl(SC_VPLL27ACTRL2);
+ tmp |= 0x10000000;
+ writel(tmp, SC_VPLL27ACTRL2);
+ tmp = readl(SC_VPLL27BCTRL2);
+ tmp |= 0x10000000;
+ writel(tmp, SC_VPLL27BCTRL2);
+
+ /* Enable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */
+ tmp = readl(SC_VPLL27ACTRL);
+ tmp &= ~0x00000001;
+ writel(tmp, SC_VPLL27ACTRL);
+ tmp = readl(SC_VPLL27BCTRL);
+ tmp &= ~0x00000001;
+ writel(tmp, SC_VPLL27BCTRL);
+}
+
+void uniphier_pro4_pll_init(void)
+{
+ vpll_init();
+ uniphier_ld4_dpll_ssc_en();
+}
diff --git a/arch/arm/mach-uniphier/clk/pll-sld3.c b/arch/arm/mach-uniphier/clk/pll-sld3.c
new file mode 100644
index 0000000..37a7c12
--- /dev/null
+++ b/arch/arm/mach-uniphier/clk/pll-sld3.c
@@ -0,0 +1,14 @@
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include "../init.h"
+#include "pll.h"
+
+void uniphier_sld3_pll_init(void)
+{
+ uniphier_ld4_dpll_ssc_en();
+}
diff --git a/arch/arm/mach-uniphier/clk/pll.h b/arch/arm/mach-uniphier/clk/pll.h
new file mode 100644
index 0000000..ef0f722
--- /dev/null
+++ b/arch/arm/mach-uniphier/clk/pll.h
@@ -0,0 +1,13 @@
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef MACH_PLL_H
+#define MACH_PLL_H
+
+void uniphier_ld4_dpll_ssc_en(void);
+
+#endif /* MACH_PLL_H */
diff --git a/arch/arm/mach-uniphier/init.h b/arch/arm/mach-uniphier/init.h
index 1dc53d5..d8f5b49 100644
--- a/arch/arm/mach-uniphier/init.h
+++ b/arch/arm/mach-uniphier/init.h
@@ -80,13 +80,10 @@
int uniphier_sld3_memconf_init(const struct uniphier_board_data *bd);
int uniphier_pxs2_memconf_init(const struct uniphier_board_data *bd);
-int uniphier_sld3_pll_init(const struct uniphier_board_data *bd);
-int uniphier_ld4_pll_init(const struct uniphier_board_data *bd);
-int uniphier_pro4_pll_init(const struct uniphier_board_data *bd);
-int uniphier_sld8_pll_init(const struct uniphier_board_data *bd);
-
-int uniphier_sld3_enable_dpll_ssc(const struct uniphier_board_data *bd);
-int uniphier_ld4_enable_dpll_ssc(const struct uniphier_board_data *bd);
+int uniphier_sld3_dpll_init(const struct uniphier_board_data *bd);
+int uniphier_ld4_dpll_init(const struct uniphier_board_data *bd);
+int uniphier_pro4_dpll_init(const struct uniphier_board_data *bd);
+int uniphier_sld8_dpll_init(const struct uniphier_board_data *bd);
int uniphier_ld4_early_clk_init(const struct uniphier_board_data *bd);
int uniphier_pro5_early_clk_init(const struct uniphier_board_data *bd);
@@ -101,6 +98,10 @@
int uniphier_ld20_umc_init(const struct uniphier_board_data *bd);
int uniphier_ld11_umc_init(const struct uniphier_board_data *bd);
+void uniphier_sld3_pll_init(void);
+void uniphier_ld4_pll_init(void);
+void uniphier_pro4_pll_init(void);
+
void uniphier_ld4_clk_init(void);
void uniphier_pro4_clk_init(void);
void uniphier_pro5_clk_init(void);
diff --git a/arch/arm/mach-uniphier/init/init-ld4.c b/arch/arm/mach-uniphier/init/init-ld4.c
index b1c9b5d..2f4c60d 100644
--- a/arch/arm/mach-uniphier/init/init-ld4.c
+++ b/arch/arm/mach-uniphier/init/init-ld4.c
@@ -1,5 +1,7 @@
/*
- * Copyright (C) 2013-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2013-2015 Panasonic Corporation
+ * Copyright (C) 2015-2016 Socionext Inc.
+ * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -19,7 +21,7 @@
support_card_reset();
- uniphier_ld4_pll_init(bd);
+ uniphier_ld4_dpll_init(bd);
support_card_init();
@@ -53,9 +55,5 @@
led_puts("L5");
- uniphier_ld4_enable_dpll_ssc(bd);
-
- led_puts("L6");
-
return 0;
}
diff --git a/arch/arm/mach-uniphier/init/init-pro4.c b/arch/arm/mach-uniphier/init/init-pro4.c
index 3528d84..2825150 100644
--- a/arch/arm/mach-uniphier/init/init-pro4.c
+++ b/arch/arm/mach-uniphier/init/init-pro4.c
@@ -1,5 +1,7 @@
/*
- * Copyright (C) 2013-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2013-2015 Panasonic Corporation
+ * Copyright (C) 2015-2016 Socionext Inc.
+ * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -16,7 +18,7 @@
support_card_reset();
- uniphier_pro4_pll_init(bd);
+ uniphier_pro4_dpll_init(bd);
support_card_init();
@@ -50,9 +52,5 @@
led_puts("L5");
- uniphier_ld4_enable_dpll_ssc(bd);
-
- led_puts("L6");
-
return 0;
}
diff --git a/arch/arm/mach-uniphier/init/init-sld3.c b/arch/arm/mach-uniphier/init/init-sld3.c
index 1ee57ec..ee3245c 100644
--- a/arch/arm/mach-uniphier/init/init-sld3.c
+++ b/arch/arm/mach-uniphier/init/init-sld3.c
@@ -1,5 +1,7 @@
/*
- * Copyright (C) 2013-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2013-2015 Panasonic Corporation
+ * Copyright (C) 2015-2016 Socionext Inc.
+ * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -18,7 +20,7 @@
support_card_reset();
- uniphier_sld3_pll_init(bd);
+ uniphier_sld3_dpll_init(bd);
support_card_init();
@@ -43,9 +45,5 @@
led_puts("L5");
- uniphier_sld3_enable_dpll_ssc(bd);
-
- led_puts("L6");
-
return 0;
}
diff --git a/arch/arm/mach-uniphier/init/init-sld8.c b/arch/arm/mach-uniphier/init/init-sld8.c
index 07c6d60..82d036b 100644
--- a/arch/arm/mach-uniphier/init/init-sld8.c
+++ b/arch/arm/mach-uniphier/init/init-sld8.c
@@ -1,5 +1,7 @@
/*
- * Copyright (C) 2013-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2013-2015 Panasonic Corporation
+ * Copyright (C) 2015-2016 Socionext Inc.
+ * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -19,7 +21,7 @@
support_card_reset();
- uniphier_sld8_pll_init(bd);
+ uniphier_sld8_dpll_init(bd);
support_card_init();
@@ -53,9 +55,5 @@
led_puts("L5");
- uniphier_ld4_enable_dpll_ssc(bd);
-
- led_puts("L6");
-
return 0;
}
diff --git a/arch/arm/mach-uniphier/pll/Makefile b/arch/arm/mach-uniphier/pll/Makefile
index 63f169c..db22ba4 100644
--- a/arch/arm/mach-uniphier/pll/Makefile
+++ b/arch/arm/mach-uniphier/pll/Makefile
@@ -2,7 +2,7 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_ARCH_UNIPHIER_SLD3) += pll-init-sld3.o pll-spectrum-sld3.o
-obj-$(CONFIG_ARCH_UNIPHIER_LD4) += pll-init-ld4.o pll-spectrum-ld4.o
-obj-$(CONFIG_ARCH_UNIPHIER_PRO4) += pll-init-pro4.o pll-spectrum-ld4.o
-obj-$(CONFIG_ARCH_UNIPHIER_SLD8) += pll-init-sld8.o pll-spectrum-ld4.o
+obj-$(CONFIG_ARCH_UNIPHIER_SLD3) += pll-init-sld3.o
+obj-$(CONFIG_ARCH_UNIPHIER_LD4) += pll-init-ld4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PRO4) += pll-init-pro4.o
+obj-$(CONFIG_ARCH_UNIPHIER_SLD8) += pll-init-sld8.o
diff --git a/arch/arm/mach-uniphier/pll/pll-init-ld4.c b/arch/arm/mach-uniphier/pll/pll-init-ld4.c
index 57c1d9f..a40b30d 100644
--- a/arch/arm/mach-uniphier/pll/pll-init-ld4.c
+++ b/arch/arm/mach-uniphier/pll/pll-init-ld4.c
@@ -1,5 +1,6 @@
/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2013-2014 Panasonic Corporation
+ * Copyright (C) 2015-2016 Socionext Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -10,12 +11,12 @@
#include "../init.h"
#include "../sc-regs.h"
-#include "../sg-regs.h"
#undef DPLL_SSC_RATE_1PER
-static int dpll_init(unsigned int dram_freq)
+int uniphier_ld4_dpll_init(const struct uniphier_board_data *bd)
{
+ unsigned int dram_freq = bd->dram_freq;
u32 tmp;
/*
@@ -48,157 +49,8 @@
tmp |= SC_DPLLCTRL2_NRSTDS;
writel(tmp, SC_DPLLCTRL2);
- return 0;
-}
-
-static void upll_init(void)
-{
- u32 tmp, clk_mode_upll, clk_mode_axosel;
-
- tmp = readl(SG_PINMON0);
- clk_mode_upll = tmp & SG_PINMON0_CLK_MODE_UPLLSRC_MASK;
- clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
-
- /* set 0 to SNRT(UPLLCTRL.bit28) and K_LD(UPLLCTRL.bit[27]) */
- tmp = readl(SC_UPLLCTRL);
- tmp &= ~0x18000000;
- writel(tmp, SC_UPLLCTRL);
-
- if (clk_mode_upll == SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT) {
- if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U ||
- clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) {
- /* AXO: 25MHz */
- tmp &= ~0x07ffffff;
- tmp |= 0x0228f5c0;
- } else {
- /* AXO: default 24.576MHz */
- tmp &= ~0x07ffffff;
- tmp |= 0x02328000;
- }
- }
-
- writel(tmp, SC_UPLLCTRL);
-
- /* set 1 to K_LD(UPLLCTRL.bit[27]) */
- tmp |= 0x08000000;
- writel(tmp, SC_UPLLCTRL);
-
- /* wait 10 usec */
- udelay(10);
-
- /* set 1 to SNRT(UPLLCTRL.bit[28]) */
- tmp |= 0x10000000;
- writel(tmp, SC_UPLLCTRL);
-}
-
-static void vpll_init(void)
-{
- u32 tmp, clk_mode_axosel;
-
- tmp = readl(SG_PINMON0);
- clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
-
- /* set 1 to VPLA27WP and VPLA27WP */
- tmp = readl(SC_VPLL27ACTRL);
- tmp |= 0x00000001;
- writel(tmp, SC_VPLL27ACTRL);
- tmp = readl(SC_VPLL27BCTRL);
- tmp |= 0x00000001;
- writel(tmp, SC_VPLL27BCTRL);
-
- /* Set 0 to VPLA_K_LD and VPLB_K_LD */
- tmp = readl(SC_VPLL27ACTRL3);
- tmp &= ~0x10000000;
- writel(tmp, SC_VPLL27ACTRL3);
- tmp = readl(SC_VPLL27BCTRL3);
- tmp &= ~0x10000000;
- writel(tmp, SC_VPLL27BCTRL3);
-
- /* Set 0 to VPLA_SNRST and VPLB_SNRST */
- tmp = readl(SC_VPLL27ACTRL2);
- tmp &= ~0x10000000;
- writel(tmp, SC_VPLL27ACTRL2);
- tmp = readl(SC_VPLL27BCTRL2);
- tmp &= ~0x10000000;
- writel(tmp, SC_VPLL27BCTRL2);
-
- /* Set 0x20 to VPLA_SNRST and VPLB_SNRST */
- tmp = readl(SC_VPLL27ACTRL2);
- tmp &= ~0x0000007f;
- tmp |= 0x00000020;
- writel(tmp, SC_VPLL27ACTRL2);
- tmp = readl(SC_VPLL27BCTRL2);
- tmp &= ~0x0000007f;
- tmp |= 0x00000020;
- writel(tmp, SC_VPLL27BCTRL2);
-
- if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U ||
- clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) {
- /* AXO: 25MHz */
- tmp = readl(SC_VPLL27ACTRL3);
- tmp &= ~0x000fffff;
- tmp |= 0x00066664;
- writel(tmp, SC_VPLL27ACTRL3);
- tmp = readl(SC_VPLL27BCTRL3);
- tmp &= ~0x000fffff;
- tmp |= 0x00066664;
- writel(tmp, SC_VPLL27BCTRL3);
- } else {
- /* AXO: default 24.576MHz */
- tmp = readl(SC_VPLL27ACTRL3);
- tmp &= ~0x000fffff;
- tmp |= 0x000f5800;
- writel(tmp, SC_VPLL27ACTRL3);
- tmp = readl(SC_VPLL27BCTRL3);
- tmp &= ~0x000fffff;
- tmp |= 0x000f5800;
- writel(tmp, SC_VPLL27BCTRL3);
- }
-
- /* Set 1 to VPLA_K_LD and VPLB_K_LD */
- tmp = readl(SC_VPLL27ACTRL3);
- tmp |= 0x10000000;
- writel(tmp, SC_VPLL27ACTRL3);
- tmp = readl(SC_VPLL27BCTRL3);
- tmp |= 0x10000000;
- writel(tmp, SC_VPLL27BCTRL3);
-
- /* wait 10 usec */
- udelay(10);
-
- /* Set 0 to VPLA_SNRST and VPLB_SNRST */
- tmp = readl(SC_VPLL27ACTRL2);
- tmp |= 0x10000000;
- writel(tmp, SC_VPLL27ACTRL2);
- tmp = readl(SC_VPLL27BCTRL2);
- tmp |= 0x10000000;
- writel(tmp, SC_VPLL27BCTRL2);
-
- /* set 0 to VPLA27WP and VPLA27WP */
- tmp = readl(SC_VPLL27ACTRL);
- tmp &= ~0x00000001;
- writel(tmp, SC_VPLL27ACTRL);
- tmp = readl(SC_VPLL27BCTRL);
- tmp |= ~0x00000001;
- writel(tmp, SC_VPLL27BCTRL);
-}
-
-int uniphier_ld4_pll_init(const struct uniphier_board_data *bd)
-{
- int ret;
-
- ret = dpll_init(bd->dram_freq);
- if (ret)
- return ret;
- upll_init();
- vpll_init();
-
- /*
- * Wait 500 usec until dpll get stable
- * We wait 10 usec in upll_init() and vpll_init()
- * so 20 usec can be saved here.
- */
- udelay(480);
+ /* Wait 500 usec until dpll gets stable */
+ udelay(500);
return 0;
}
diff --git a/arch/arm/mach-uniphier/pll/pll-init-pro4.c b/arch/arm/mach-uniphier/pll/pll-init-pro4.c
index a7e4e0e..3ac48d6 100644
--- a/arch/arm/mach-uniphier/pll/pll-init-pro4.c
+++ b/arch/arm/mach-uniphier/pll/pll-init-pro4.c
@@ -1,5 +1,6 @@
/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2013-2014 Panasonic Corporation
+ * Copyright (C) 2015-2016 Socionext Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -10,12 +11,12 @@
#include "../init.h"
#include "../sc-regs.h"
-#include "../sg-regs.h"
#undef DPLL_SSC_RATE_1PER
-static int dpll_init(unsigned int dram_freq)
+int uniphier_pro4_dpll_init(const struct uniphier_board_data *bd)
{
+ unsigned int dram_freq = bd->dram_freq;
u32 tmp;
/*
@@ -52,113 +53,8 @@
tmp |= SC_DPLLCTRL2_NRSTDS;
writel(tmp, SC_DPLLCTRL2);
- return 0;
-}
-
-static void vpll_init(void)
-{
- u32 tmp, clk_mode_axosel;
-
- /* Set VPLL27A & VPLL27B */
- tmp = readl(SG_PINMON0);
- clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
-
- /* 25MHz or 6.25MHz is default for Pro4R, no need to set VPLLA/B */
- if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ ||
- clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ)
- return;
-
- /* Disable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */
- tmp = readl(SC_VPLL27ACTRL);
- tmp |= 0x00000001;
- writel(tmp, SC_VPLL27ACTRL);
- tmp = readl(SC_VPLL27BCTRL);
- tmp |= 0x00000001;
- writel(tmp, SC_VPLL27BCTRL);
-
- /* Unset VPLA_K_LD and VPLB_K_LD bit */
- tmp = readl(SC_VPLL27ACTRL3);
- tmp &= ~0x10000000;
- writel(tmp, SC_VPLL27ACTRL3);
- tmp = readl(SC_VPLL27BCTRL3);
- tmp &= ~0x10000000;
- writel(tmp, SC_VPLL27BCTRL3);
-
- /* Set VPLA_M and VPLB_M to 0x20 */
- tmp = readl(SC_VPLL27ACTRL2);
- tmp &= ~0x0000007f;
- tmp |= 0x00000020;
- writel(tmp, SC_VPLL27ACTRL2);
- tmp = readl(SC_VPLL27BCTRL2);
- tmp &= ~0x0000007f;
- tmp |= 0x00000020;
- writel(tmp, SC_VPLL27BCTRL2);
-
- if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ ||
- clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ) {
- /* Set VPLA_K and VPLB_K for AXO: 25MHz */
- tmp = readl(SC_VPLL27ACTRL3);
- tmp &= ~0x000fffff;
- tmp |= 0x00066666;
- writel(tmp, SC_VPLL27ACTRL3);
- tmp = readl(SC_VPLL27BCTRL3);
- tmp &= ~0x000fffff;
- tmp |= 0x00066666;
- writel(tmp, SC_VPLL27BCTRL3);
- } else {
- /* Set VPLA_K and VPLB_K for AXO: 24.576 MHz */
- tmp = readl(SC_VPLL27ACTRL3);
- tmp &= ~0x000fffff;
- tmp |= 0x000f5800;
- writel(tmp, SC_VPLL27ACTRL3);
- tmp = readl(SC_VPLL27BCTRL3);
- tmp &= ~0x000fffff;
- tmp |= 0x000f5800;
- writel(tmp, SC_VPLL27BCTRL3);
- }
-
- /* wait 1 usec */
- udelay(1);
-
- /* Set VPLA_K_LD and VPLB_K_LD to load K parameters */
- tmp = readl(SC_VPLL27ACTRL3);
- tmp |= 0x10000000;
- writel(tmp, SC_VPLL27ACTRL3);
- tmp = readl(SC_VPLL27BCTRL3);
- tmp |= 0x10000000;
- writel(tmp, SC_VPLL27BCTRL3);
-
- /* Unset VPLA_SNRST and VPLB_SNRST bit */
- tmp = readl(SC_VPLL27ACTRL2);
- tmp |= 0x10000000;
- writel(tmp, SC_VPLL27ACTRL2);
- tmp = readl(SC_VPLL27BCTRL2);
- tmp |= 0x10000000;
- writel(tmp, SC_VPLL27BCTRL2);
-
- /* Enable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */
- tmp = readl(SC_VPLL27ACTRL);
- tmp &= ~0x00000001;
- writel(tmp, SC_VPLL27ACTRL);
- tmp = readl(SC_VPLL27BCTRL);
- tmp &= ~0x00000001;
- writel(tmp, SC_VPLL27BCTRL);
-}
-
-int uniphier_pro4_pll_init(const struct uniphier_board_data *bd)
-{
- int ret;
-
- ret = dpll_init(bd->dram_freq);
- if (ret)
- return ret;
- vpll_init();
-
- /*
- * Wait 500 usec until dpll get stable
- * We wait 1 usec in vpll_init() so 1 usec can be saved here.
- */
- udelay(499);
+ /* Wait until dpll gets stable */
+ udelay(500);
return 0;
}
diff --git a/arch/arm/mach-uniphier/pll/pll-init-sld3.c b/arch/arm/mach-uniphier/pll/pll-init-sld3.c
index 5b4f2e3..0eb310c 100644
--- a/arch/arm/mach-uniphier/pll/pll-init-sld3.c
+++ b/arch/arm/mach-uniphier/pll/pll-init-sld3.c
@@ -6,7 +6,7 @@
#include "../init.h"
-int uniphier_sld3_pll_init(const struct uniphier_board_data *bd)
+int uniphier_sld3_dpll_init(const struct uniphier_board_data *bd)
{
/* add pll init code here */
return 0;
diff --git a/arch/arm/mach-uniphier/pll/pll-init-sld8.c b/arch/arm/mach-uniphier/pll/pll-init-sld8.c
index 8b6a67c..7faa5e8 100644
--- a/arch/arm/mach-uniphier/pll/pll-init-sld8.c
+++ b/arch/arm/mach-uniphier/pll/pll-init-sld8.c
@@ -1,5 +1,6 @@
/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2013-2014 Panasonic Corporation
+ * Copyright (C) 2015-2016 Socionext Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -9,9 +10,8 @@
#include "../init.h"
#include "../sc-regs.h"
-#include "../sg-regs.h"
-static void dpll_init(void)
+int uniphier_sld8_dpll_init(const struct uniphier_board_data *bd)
{
u32 tmp;
/*
@@ -54,152 +54,9 @@
tmp &= ~0xefffffff;
tmp |= 0x0cfeb851;
writel(tmp, SC_DPLLCTRL2);
-}
-static void upll_init(void)
-{
- u32 tmp, clk_mode_upll, clk_mode_axosel;
-
- tmp = readl(SG_PINMON0);
- clk_mode_upll = tmp & SG_PINMON0_CLK_MODE_UPLLSRC_MASK;
- clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
-
- /* set 0 to SNRT(UPLLCTRL.bit28) and K_LD(UPLLCTRL.bit[27]) */
- tmp = readl(SC_UPLLCTRL);
- tmp &= ~0x18000000;
- writel(tmp, SC_UPLLCTRL);
-
- if (clk_mode_upll == SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT) {
- if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U ||
- clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) {
- /* AXO: 25MHz */
- tmp &= ~0x07ffffff;
- tmp |= 0x0228f5c0;
- } else {
- /* AXO: default 24.576MHz */
- tmp &= ~0x07ffffff;
- tmp |= 0x02328000;
- }
- }
-
- writel(tmp, SC_UPLLCTRL);
-
- /* set 1 to K_LD(UPLLCTRL.bit[27]) */
- tmp |= 0x08000000;
- writel(tmp, SC_UPLLCTRL);
-
- /* wait 10 usec */
- udelay(10);
-
- /* set 1 to SNRT(UPLLCTRL.bit[28]) */
- tmp |= 0x10000000;
- writel(tmp, SC_UPLLCTRL);
-}
-
-static void vpll_init(void)
-{
- u32 tmp, clk_mode_axosel;
-
- tmp = readl(SG_PINMON0);
- clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
-
- /* set 1 to VPLA27WP and VPLA27WP */
- tmp = readl(SC_VPLL27ACTRL);
- tmp |= 0x00000001;
- writel(tmp, SC_VPLL27ACTRL);
- tmp = readl(SC_VPLL27BCTRL);
- tmp |= 0x00000001;
- writel(tmp, SC_VPLL27BCTRL);
-
- /* Set 0 to VPLA_K_LD and VPLB_K_LD */
- tmp = readl(SC_VPLL27ACTRL3);
- tmp &= ~0x10000000;
- writel(tmp, SC_VPLL27ACTRL3);
- tmp = readl(SC_VPLL27BCTRL3);
- tmp &= ~0x10000000;
- writel(tmp, SC_VPLL27BCTRL3);
-
- /* Set 0 to VPLA_SNRST and VPLB_SNRST */
- tmp = readl(SC_VPLL27ACTRL2);
- tmp &= ~0x10000000;
- writel(tmp, SC_VPLL27ACTRL2);
- tmp = readl(SC_VPLL27BCTRL2);
- tmp &= ~0x10000000;
- writel(tmp, SC_VPLL27BCTRL2);
-
- /* Set 0x20 to VPLA_SNRST and VPLB_SNRST */
- tmp = readl(SC_VPLL27ACTRL2);
- tmp &= ~0x0000007f;
- tmp |= 0x00000020;
- writel(tmp, SC_VPLL27ACTRL2);
- tmp = readl(SC_VPLL27BCTRL2);
- tmp &= ~0x0000007f;
- tmp |= 0x00000020;
- writel(tmp, SC_VPLL27BCTRL2);
-
- if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U ||
- clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) {
- /* AXO: 25MHz */
- tmp = readl(SC_VPLL27ACTRL3);
- tmp &= ~0x000fffff;
- tmp |= 0x00066664;
- writel(tmp, SC_VPLL27ACTRL3);
- tmp = readl(SC_VPLL27BCTRL3);
- tmp &= ~0x000fffff;
- tmp |= 0x00066664;
- writel(tmp, SC_VPLL27BCTRL3);
- } else {
- /* AXO: default 24.576MHz */
- tmp = readl(SC_VPLL27ACTRL3);
- tmp &= ~0x000fffff;
- tmp |= 0x000f5800;
- writel(tmp, SC_VPLL27ACTRL3);
- tmp = readl(SC_VPLL27BCTRL3);
- tmp &= ~0x000fffff;
- tmp |= 0x000f5800;
- writel(tmp, SC_VPLL27BCTRL3);
- }
-
- /* Set 1 to VPLA_K_LD and VPLB_K_LD */
- tmp = readl(SC_VPLL27ACTRL3);
- tmp |= 0x10000000;
- writel(tmp, SC_VPLL27ACTRL3);
- tmp = readl(SC_VPLL27BCTRL3);
- tmp |= 0x10000000;
- writel(tmp, SC_VPLL27BCTRL3);
-
- /* wait 10 usec */
- udelay(10);
-
- /* Set 0 to VPLA_SNRST and VPLB_SNRST */
- tmp = readl(SC_VPLL27ACTRL2);
- tmp |= 0x10000000;
- writel(tmp, SC_VPLL27ACTRL2);
- tmp = readl(SC_VPLL27BCTRL2);
- tmp |= 0x10000000;
- writel(tmp, SC_VPLL27BCTRL2);
-
- /* set 0 to VPLA27WP and VPLA27WP */
- tmp = readl(SC_VPLL27ACTRL);
- tmp &= ~0x00000001;
- writel(tmp, SC_VPLL27ACTRL);
- tmp = readl(SC_VPLL27BCTRL);
- tmp |= ~0x00000001;
- writel(tmp, SC_VPLL27BCTRL);
-}
-
-int uniphier_sld8_pll_init(const struct uniphier_board_data *bd)
-{
- dpll_init();
- upll_init();
- vpll_init();
-
- /*
- * Wait 500 usec until dpll get stable
- * We wait 10 usec in upll_init() and vpll_init()
- * so 20 usec can be saved here.
- */
- udelay(480);
+ /* Wait 500 usec until dpll gets stable */
+ udelay(500);
return 0;
}
diff --git a/arch/arm/mach-uniphier/pll/pll-spectrum-ld4.c b/arch/arm/mach-uniphier/pll/pll-spectrum-ld4.c
deleted file mode 100644
index dc97697..0000000
--- a/arch/arm/mach-uniphier/pll/pll-spectrum-ld4.c
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <linux/io.h>
-
-#include "../init.h"
-#include "../sc-regs.h"
-
-int uniphier_ld4_enable_dpll_ssc(const struct uniphier_board_data *bd)
-{
- u32 tmp;
-
- tmp = readl(SC_DPLLCTRL);
- tmp |= SC_DPLLCTRL_SSC_EN;
- writel(tmp, SC_DPLLCTRL);
-
- return 0;
-}
diff --git a/arch/arm/mach-uniphier/pll/pll-spectrum-sld3.c b/arch/arm/mach-uniphier/pll/pll-spectrum-sld3.c
deleted file mode 100644
index ff09a92..0000000
--- a/arch/arm/mach-uniphier/pll/pll-spectrum-sld3.c
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/io.h>
-
-#include "../init.h"
-#include "../sc-regs.h"
-
-int uniphier_sld3_enable_dpll_ssc(const struct uniphier_board_data *bd)
-{
- u32 tmp;
-
- tmp = readl(SC_DPLLCTRL);
- tmp |= SC_DPLLCTRL_SSC_EN;
- writel(tmp, SC_DPLLCTRL);
-
- return 0;
-}