PXA: xm250: Fix for reloc
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
diff --git a/include/configs/xm250.h b/include/configs/xm250.h
index 2ff9a28..ea52454 100644
--- a/include/configs/xm250.h
+++ b/include/configs/xm250.h
@@ -35,6 +35,7 @@
#define CONFIG_PXA250 1 /* This is an PXA250 CPU */
#define CONFIG_XM250 1 /* on a MicroSys XM250 Board */
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+#define CONFIG_SYS_TEXT_BASE 0x0
/* we will never enable dcache, because we have to setup MMU first */
#define CONFIG_SYS_NO_DCACHE
@@ -322,9 +323,9 @@
* Clocks, power control and interrupts
*/
#define CONFIG_SYS_PSSR_VAL 0x00000030
-#define CONFIG_SYS_CCCR_VAL 0x00000161 /* 100 MHz memory, 400 MHz CPU, 400 Turbo */
-#define CONFIG_SYS_CKEN_VAL 0x000141ec /* FFUART and STUART enabled */
-#define CONFIG_SYS_ICMR_VAL 0x00000000 /* No interrupts enabled */
+#define CONFIG_SYS_CCCR 0x00000161 /* 100 MHz memory, 400 MHz CPU, 400 Turbo */
+#define CONFIG_SYS_CKEN 0x000141ec /* FFUART and STUART enabled */
+#define CONFIG_SYS_ICMR 0x00000000 /* No interrupts enabled */
/* FIXME
*
@@ -343,6 +344,8 @@
#define CONFIG_SYS_MDCNFG_VAL 0x000009c9
#define CONFIG_SYS_MDMRS_VAL 0x00220022
#define CONFIG_SYS_MDREFR_VAL 0x000da018 /* Initial setting, individual bits set in lowlevel_init.S */
+#define CONFIG_SYS_FLYCNFG_VAL 0x00000000
+#define CONFIG_SYS_SXCNFG_VAL 0x00000000
/*
* PCMCIA and CF Interfaces (NOT USED, these values from lubbock init)