net: Update eQos driver and FEC driver to use eth phy interfaces
Update eQoS and fec ethernet drivers to support shared MDIO framework
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
diff --git a/drivers/net/dwc_eth_qos.c b/drivers/net/dwc_eth_qos.c
index 60dfd17..bdddbde 100644
--- a/drivers/net/dwc_eth_qos.c
+++ b/drivers/net/dwc_eth_qos.c
@@ -41,6 +41,7 @@
#include <wait_bit.h>
#include <asm/gpio.h>
#include <asm/io.h>
+#include <eth_phy.h>
/* Core registers */
@@ -1083,7 +1084,14 @@
* don't need to reconnect/reconfigure again
*/
if (!eqos->phy) {
- eqos->phy = phy_connect(eqos->mii, eqos->phyaddr, dev,
+ int addr = -1;
+#ifdef CONFIG_DM_ETH_PHY
+ addr = eth_phy_get_addr(dev);
+#endif
+#ifdef DWC_NET_PHYADDR
+ addr = DWC_NET_PHYADDR;
+#endif
+ eqos->phy = phy_connect(eqos->mii, addr, dev,
eqos->config->interface(dev));
if (!eqos->phy) {
pr_err("phy_connect() failed");
@@ -1820,23 +1828,32 @@
goto err_remove_resources_core;
}
- eqos->mii = mdio_alloc();
+#ifdef CONFIG_DM_ETH_PHY
+ eqos->mii = eth_phy_get_mdio_bus(dev);
+#endif
if (!eqos->mii) {
- pr_err("mdio_alloc() failed");
- ret = -ENOMEM;
- goto err_remove_resources_tegra;
- }
- eqos->mii->read = eqos_mdio_read;
- eqos->mii->write = eqos_mdio_write;
- eqos->mii->priv = eqos;
- strcpy(eqos->mii->name, dev->name);
+ eqos->mii = mdio_alloc();
+ if (!eqos->mii) {
+ pr_err("mdio_alloc() failed");
+ ret = -ENOMEM;
+ goto err_remove_resources_tegra;
+ }
+ eqos->mii->read = eqos_mdio_read;
+ eqos->mii->write = eqos_mdio_write;
+ eqos->mii->priv = eqos;
+ strcpy(eqos->mii->name, dev->name);
- ret = mdio_register(eqos->mii);
- if (ret < 0) {
- pr_err("mdio_register() failed: %d", ret);
- goto err_free_mdio;
+ ret = mdio_register(eqos->mii);
+ if (ret < 0) {
+ pr_err("mdio_register() failed: %d", ret);
+ goto err_free_mdio;
+ }
}
+#ifdef CONFIG_DM_ETH_PHY
+ eth_phy_set_mdio_bus(dev, eqos->mii);
+#endif
+
debug("%s: OK\n", __func__);
return 0;
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index 3046305..910c961 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -28,6 +28,7 @@
#include <asm-generic/gpio.h>
#include "fec_mxc.h"
+#include <eth_phy.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -1444,16 +1445,27 @@
fec_reg_setup(priv);
priv->dev_id = dev->seq;
-#ifdef CONFIG_FEC_MXC_MDIO_BASE
- bus = fec_get_miibus((ulong)CONFIG_FEC_MXC_MDIO_BASE, dev->seq);
-#else
- bus = fec_get_miibus((ulong)priv->eth, dev->seq);
+
+#ifdef CONFIG_DM_ETH_PHY
+ bus = eth_phy_get_mdio_bus(dev);
#endif
+
+ if (!bus) {
+#ifdef CONFIG_FEC_MXC_MDIO_BASE
+ bus = fec_get_miibus((ulong)CONFIG_FEC_MXC_MDIO_BASE, dev->seq);
+#else
+ bus = fec_get_miibus((ulong)priv->eth, dev->seq);
+#endif
+ }
if (!bus) {
ret = -ENOMEM;
goto err_mii;
}
+#ifdef CONFIG_DM_ETH_PHY
+ eth_phy_set_mdio_bus(dev, bus);
+#endif
+
priv->bus = bus;
priv->interface = pdata->phy_interface;
switch (priv->interface) {