rockchip: rk322x: use common TPL board file
Use Common tpl.c instead of rk322x-board-tpl.c
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index 2b83a68..99a4265 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -59,6 +59,7 @@
select SPL_DRIVERS_MISC_SUPPORT
imply SPL_SERIAL_SUPPORT
imply TPL_SERIAL_SUPPORT
+ imply TPL_ROCKCHIP_COMMON_BOARD
select ROCKCHIP_BROM_HELPER
select TPL_LIBCOMMON_SUPPORT
select TPL_LIBGENERIC_SUPPORT
diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile
index 2686e0c..b217421 100644
--- a/arch/arm/mach-rockchip/Makefile
+++ b/arch/arm/mach-rockchip/Makefile
@@ -12,7 +12,6 @@
obj-tpl-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board-tpl.o
obj-tpl-$(CONFIG_ROCKCHIP_RK3368) += rk3368-board-tpl.o
-obj-tpl-$(CONFIG_ROCKCHIP_RK322X) += rk322x-board-tpl.o
obj-tpl-$(CONFIG_ROCKCHIP_RK3399) += rk3399-board-tpl.o
obj-spl-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board-spl.o
diff --git a/arch/arm/mach-rockchip/rk322x-board-tpl.c b/arch/arm/mach-rockchip/rk322x-board-tpl.c
deleted file mode 100644
index a0d7bc9..0000000
--- a/arch/arm/mach-rockchip/rk322x-board-tpl.c
+++ /dev/null
@@ -1,80 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2019 Rockchip Electronics Co., Ltd
- */
-
-#include <common.h>
-#include <debug_uart.h>
-#include <dm.h>
-#include <ram.h>
-#include <spl.h>
-#include <asm/io.h>
-#include <asm/arch-rockchip/bootrom.h>
-
-u32 spl_boot_device(void)
-{
- return BOOT_DEVICE_MMC1;
-}
-
-#define TIMER_LOAD_COUNT_L 0x00
-#define TIMER_LOAD_COUNT_H 0x04
-#define TIMER_CONTROL_REG 0x10
-#define TIMER_EN 0x1
-#define TIMER_FMODE BIT(0)
-#define TIMER_RMODE BIT(1)
-
-void rockchip_stimer_init(void)
-{
- /* If Timer already enabled, don't re-init it */
- u32 reg = readl(CONFIG_ROCKCHIP_STIMER_BASE + TIMER_CONTROL_REG);
-
- if (reg & TIMER_EN)
- return;
-
- asm volatile("mcr p15, 0, %0, c14, c0, 0"
- : : "r"(COUNTER_FREQUENCY));
-
- writel(0, CONFIG_ROCKCHIP_STIMER_BASE + TIMER_CONTROL_REG);
- writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE);
- writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE + 4);
- writel(TIMER_EN | TIMER_FMODE, CONFIG_ROCKCHIP_STIMER_BASE +
- TIMER_CONTROL_REG);
-}
-
-void board_init_f(ulong dummy)
-{
- struct udevice *dev;
- int ret;
-
- /*
- * Debug UART can be used from here if required:
- *
- * debug_uart_init();
- * printch('a');
- * printhex8(0x1234);
- * printascii("string");
- */
- debug_uart_init();
- printascii("TPL Init");
-
- ret = spl_early_init();
- if (ret) {
- debug("spl_early_init() failed: %d\n", ret);
- hang();
- }
-
- /* Init secure timer */
- rockchip_stimer_init();
- /* Init ARM arch timer in arch/arm/cpu/armv7/arch_timer.c */
- timer_init();
-
- ret = uclass_get_device(UCLASS_RAM, 0, &dev);
- if (ret) {
- printf("DRAM init failed: %d\n", ret);
- return;
- }
-
-#if defined(CONFIG_TPL_ROCKCHIP_BACK_TO_BROM) && !defined(CONFIG_TPL_BOARD_INIT)
- back_to_bootrom(BROM_BOOT_NEXTSTAGE);
-#endif
-}