arch/arm/mach-rockchip/rk322x-board-tpl.c

// SPDX-License-Identifier: GPL-2.0+
/*
 * (C) Copyright 2019 Rockchip Electronics Co., Ltd
 */

#include <common.h>
#include <debug_uart.h>
#include <dm.h>
#include <ram.h>
#include <spl.h>
#include <asm/io.h>
#include <asm/arch-rockchip/bootrom.h>

u32 spl_boot_device(void)
{
	return BOOT_DEVICE_MMC1;
}

#define TIMER_LOAD_COUNT_L	0x00
#define TIMER_LOAD_COUNT_H	0x04
#define TIMER_CONTROL_REG	0x10
#define TIMER_EN	0x1
#define	TIMER_FMODE	BIT(0)
#define	TIMER_RMODE	BIT(1)

void rockchip_stimer_init(void)
{
	/* If Timer already enabled, don't re-init it */
	u32 reg = readl(CONFIG_ROCKCHIP_STIMER_BASE + TIMER_CONTROL_REG);

	if (reg & TIMER_EN)
		return;

	asm volatile("mcr p15, 0, %0, c14, c0, 0"
		     : : "r"(COUNTER_FREQUENCY));

	writel(0, CONFIG_ROCKCHIP_STIMER_BASE + TIMER_CONTROL_REG);
	writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE);
	writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE + 4);
	writel(TIMER_EN | TIMER_FMODE, CONFIG_ROCKCHIP_STIMER_BASE +
	       TIMER_CONTROL_REG);
}

void board_init_f(ulong dummy)
{
	struct udevice *dev;
	int ret;

	/*
	 * Debug UART can be used from here if required:
	 *
	 * debug_uart_init();
	 * printch('a');
	 * printhex8(0x1234);
	 * printascii("string");
	 */
	debug_uart_init();
	printascii("TPL Init");

	ret = spl_early_init();
	if (ret) {
		debug("spl_early_init() failed: %d\n", ret);
		hang();
	}

	/* Init secure timer */
	rockchip_stimer_init();
	/* Init ARM arch timer in arch/arm/cpu/armv7/arch_timer.c */
	timer_init();

	ret = uclass_get_device(UCLASS_RAM, 0, &dev);
	if (ret) {
		printf("DRAM init failed: %d\n", ret);
		return;
	}

#if defined(CONFIG_TPL_ROCKCHIP_BACK_TO_BROM) && !defined(CONFIG_TPL_BOARD_INIT)
	back_to_bootrom(BROM_BOOT_NEXTSTAGE);
#endif
}