board: ti: DRA72: revC evm: Update sdram timing configuration for SR2.0
DDR configuration has changes from SR1.1 based Rev-A/B version of evm
to the SR2.0 based Rev C of the EVM. Rev C evm now uses the higher
density MT41K512M8RH-125-AAT:E (IT) which is of size 2GB.
Update the DDR configuration based on data from EMIF configuration
tool 1.1.1. NOTE: we use eeprom information (ram_size) to update the
configuration.
Tested-by: Vishal Mahaveer <vishalm@ti.com>
Signed-off-by: Ravi Babu <ravibabu@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index 4e45abf..b646df6 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -32,8 +32,11 @@
#include "../common/board_detect.h"
#define board_is_dra74x_evm() board_ti_is("5777xCPU")
+#define board_is_dra72x_evm() board_ti_is("DRA72x-T")
#define board_is_dra74x_revh_or_later() board_is_dra74x_evm() && \
(strncmp("H", board_ti_get_rev(), 1) <= 0)
+#define board_is_dra72x_revc_or_later() board_is_dra72x_evm() && \
+ (strncmp("C", board_ti_get_rev(), 1) <= 0)
#define board_ti_get_emif_size() board_ti_get_emif1_size() + \
board_ti_get_emif2_size()
@@ -127,6 +130,31 @@
.emif_rd_wr_exec_thresh = 0x00000305
};
+const struct emif_regs emif_1_regs_ddr3_666_mhz_1cs_dra_es2 = {
+ .sdram_config_init = 0x61862BB2,
+ .sdram_config = 0x61862BB2,
+ .sdram_config2 = 0x00000000,
+ .ref_ctrl = 0x0000514D,
+ .ref_ctrl_final = 0x0000144A,
+ .sdram_tim1 = 0xD1137824,
+ .sdram_tim2 = 0x30B37FE3,
+ .sdram_tim3 = 0x409F8AD8,
+ .read_idle_ctrl = 0x00050000,
+ .zq_config = 0x5007190B,
+ .temp_alert_config = 0x00000000,
+ .emif_ddr_phy_ctlr_1_init = 0x0824400E,
+ .emif_ddr_phy_ctlr_1 = 0x0E24400E,
+ .emif_ddr_ext_phy_ctrl_1 = 0x04040100,
+ .emif_ddr_ext_phy_ctrl_2 = 0x006B009F,
+ .emif_ddr_ext_phy_ctrl_3 = 0x006B00A2,
+ .emif_ddr_ext_phy_ctrl_4 = 0x006B00A8,
+ .emif_ddr_ext_phy_ctrl_5 = 0x006B00A8,
+ .emif_rd_wr_lvl_rmp_win = 0x00000000,
+ .emif_rd_wr_lvl_rmp_ctl = 0x80000000,
+ .emif_rd_wr_lvl_ctl = 0x00000000,
+ .emif_rd_wr_exec_thresh = 0x00000305
+};
+
const struct emif_regs emif1_ddr3_532_mhz_1cs_2G = {
.sdram_config_init = 0x61851ab2,
.sdram_config = 0x61851ab2,
@@ -203,7 +231,11 @@
}
break;
case DRA722_ES1_0:
- *regs = &emif_1_regs_ddr3_666_mhz_1cs_dra_es1;
+ case DRA722_ES2_0:
+ if (ram_size < CONFIG_MAX_MEM_MAPPED)
+ *regs = &emif_1_regs_ddr3_666_mhz_1cs_dra_es1;
+ else
+ *regs = &emif_1_regs_ddr3_666_mhz_1cs_dra_es2;
break;
default:
*regs = &emif1_ddr3_532_mhz_1cs;
@@ -234,6 +266,18 @@
.is_ma_present = 0x1
};
+/*
+ * DRA722 EVM EMIF1 2GB CONFIGURATION
+ * EMIF1 4 devices of 512Mb x 8 Micron
+ */
+const struct dmm_lisa_map_regs lisa_map_2G_x_4 = {
+ .dmm_lisa_map_0 = 0x0,
+ .dmm_lisa_map_1 = 0x0,
+ .dmm_lisa_map_2 = 0x80700100,
+ .dmm_lisa_map_3 = 0xFF020100,
+ .is_ma_present = 0x1
+};
+
void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs)
{
u64 ram_size;
@@ -250,8 +294,13 @@
*dmm_lisa_regs = &lisa_map_dra7_1536MB;
break;
case DRA722_ES1_0:
+ case DRA722_ES2_0:
default:
- *dmm_lisa_regs = &lisa_map_2G_x_2;
+ if (ram_size < CONFIG_MAX_MEM_MAPPED)
+ *dmm_lisa_regs = &lisa_map_2G_x_2;
+ else
+ *dmm_lisa_regs = &lisa_map_2G_x_4;
+ break;
}
}
@@ -324,8 +373,10 @@
if (board_is_dra74x_evm()) {
bname = "DRA74x EVM";
- /* If EEPROM is not populated */
+ } else if (board_is_dra72x_evm()) {
+ bname = "DRA72x EVM";
} else {
+ /* If EEPROM is not populated */
if (is_dra72x())
bname = "DRA72x EVM";
else
@@ -614,7 +665,7 @@
return;
/* Do not enable VTT for DRA722 */
- if (omap_revision() == DRA722_ES1_0)
+ if (is_dra72x())
return;
/*