drivers: gpio: implement MAX77663 GPIO cell
MAXIM Semiconductor's PMIC, MAX77663 has 8 GPIO pins and 3 GPIO-like
pins. It also supports interrupts from these pins.
Add GPIO driver for these pins to control via GPIO APIs.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index ba42b07..250f1eb 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -238,6 +238,15 @@
original maxim device has 8 push/pull outputs,
some clones offers 16bit.
+config MAX77663_GPIO
+ bool "MAX77663 GPIO cell of PMIC driver"
+ depends on DM_GPIO && DM_PMIC_MAX77663
+ help
+ GPIO driver for MAX77663 PMIC from Maxim Semiconductor.
+ MAX77663 PMIC has 8 pins that can be configured as GPIOs
+ and 3 GPIO-like pins dedicated for power/reset buttons
+ and LID sensor.
+
config MCP230XX_GPIO
bool "MCP230XX GPIO driver"
depends on DM
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index c8b3fd7..dab3eb9 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -68,6 +68,7 @@
obj-$(CONFIG_SIFIVE_GPIO) += sifive-gpio.o
obj-$(CONFIG_NOMADIK_GPIO) += nmk_gpio.o
obj-$(CONFIG_MAX7320_GPIO) += max7320_gpio.o
+obj-$(CONFIG_$(SPL_)MAX77663_GPIO) += max77663_gpio.o
obj-$(CONFIG_SL28CPLD_GPIO) += sl28cpld-gpio.o
obj-$(CONFIG_ZYNQMP_GPIO_MODEPIN) += zynqmp_gpio_modepin.o
obj-$(CONFIG_SLG7XL45106_I2C_GPO) += gpio_slg7xl45106.o
diff --git a/drivers/gpio/max77663_gpio.c b/drivers/gpio/max77663_gpio.c
new file mode 100644
index 0000000..ecb6047
--- /dev/null
+++ b/drivers/gpio/max77663_gpio.c
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright(C) 2023 Svyatoslav Ryhel <clamor95@gmail.com>
+ */
+
+#include <dm.h>
+#include <asm/gpio.h>
+#include <power/max77663.h>
+#include <power/pmic.h>
+
+#define NUM_ENTRIES 11 /* 8 GPIOs + 3 KEYs */
+#define NUM_GPIOS 8
+
+#define MAX77663_CNFG1_GPIO 0x36
+#define GPIO_REG_ADDR(offset) (MAX77663_CNFG1_GPIO + (offset))
+
+#define MAX77663_CNFG_GPIO_DIR_MASK BIT(1)
+#define MAX77663_CNFG_GPIO_DIR_INPUT BIT(1)
+#define MAX77663_CNFG_GPIO_DIR_OUTPUT 0
+#define MAX77663_CNFG_GPIO_INPUT_VAL_MASK BIT(2)
+#define MAX77663_CNFG_GPIO_OUTPUT_VAL_MASK BIT(3)
+#define MAX77663_CNFG_GPIO_OUTPUT_VAL_HIGH BIT(3)
+#define MAX77663_CNFG_GPIO_OUTPUT_VAL_LOW 0
+#define MAX77663_CNFG_IRQ GENMASK(5, 4)
+
+#define MAX77663_ONOFFSTAT_REG 0x15
+#define EN0 BIT(2) /* KEY 2 */
+#define ACOK BIT(1) /* KEY 1 */
+#define LID BIT(0) /* KEY 0 */
+
+static int max77663_gpio_direction_input(struct udevice *dev, unsigned int offset)
+{
+ int ret;
+
+ if (offset >= NUM_GPIOS)
+ return 0;
+
+ ret = pmic_clrsetbits(dev->parent, GPIO_REG_ADDR(offset),
+ MAX77663_CNFG_GPIO_DIR_MASK,
+ MAX77663_CNFG_GPIO_DIR_INPUT);
+ if (ret < 0)
+ log_debug("%s: CNFG_GPIOx dir update failed: %d\n", __func__, ret);
+
+ return ret;
+}
+
+static int max77663_gpio_direction_output(struct udevice *dev, unsigned int offset,
+ int value)
+{
+ u8 val;
+ int ret;
+
+ if (offset >= NUM_GPIOS)
+ return -EINVAL;
+
+ val = (value) ? MAX77663_CNFG_GPIO_OUTPUT_VAL_HIGH :
+ MAX77663_CNFG_GPIO_OUTPUT_VAL_LOW;
+
+ ret = pmic_clrsetbits(dev->parent, GPIO_REG_ADDR(offset),
+ MAX77663_CNFG_GPIO_OUTPUT_VAL_MASK, val);
+ if (ret < 0) {
+ log_debug("%s: CNFG_GPIOx val update failed: %d\n", __func__, ret);
+ return ret;
+ }
+
+ ret = pmic_clrsetbits(dev->parent, GPIO_REG_ADDR(offset),
+ MAX77663_CNFG_GPIO_DIR_MASK,
+ MAX77663_CNFG_GPIO_DIR_OUTPUT);
+ if (ret < 0)
+ log_debug("%s: CNFG_GPIOx dir update failed: %d\n", __func__, ret);
+
+ return ret;
+}
+
+static int max77663_gpio_get_value(struct udevice *dev, unsigned int offset)
+{
+ int ret;
+
+ if (offset >= NUM_GPIOS) {
+ ret = pmic_reg_read(dev->parent, MAX77663_ONOFFSTAT_REG);
+ if (ret < 0) {
+ log_debug("%s: ONOFFSTAT_REG read failed: %d\n", __func__, ret);
+ return ret;
+ }
+
+ return !!(ret & BIT(offset - NUM_GPIOS));
+ }
+
+ ret = pmic_reg_read(dev->parent, GPIO_REG_ADDR(offset));
+ if (ret < 0) {
+ log_debug("%s: CNFG_GPIOx read failed: %d\n", __func__, ret);
+ return ret;
+ }
+
+ if (ret & MAX77663_CNFG_GPIO_DIR_MASK)
+ return !!(ret & MAX77663_CNFG_GPIO_INPUT_VAL_MASK);
+ else
+ return !!(ret & MAX77663_CNFG_GPIO_OUTPUT_VAL_MASK);
+}
+
+static int max77663_gpio_set_value(struct udevice *dev, unsigned int offset,
+ int value)
+{
+ u8 val;
+ int ret;
+
+ if (offset >= NUM_GPIOS)
+ return -EINVAL;
+
+ val = (value) ? MAX77663_CNFG_GPIO_OUTPUT_VAL_HIGH :
+ MAX77663_CNFG_GPIO_OUTPUT_VAL_LOW;
+
+ ret = pmic_clrsetbits(dev->parent, GPIO_REG_ADDR(offset),
+ MAX77663_CNFG_GPIO_OUTPUT_VAL_MASK, val);
+ if (ret < 0)
+ log_debug("%s: CNFG_GPIO_OUT update failed: %d\n", __func__, ret);
+
+ return ret;
+}
+
+static int max77663_gpio_get_function(struct udevice *dev, unsigned int offset)
+{
+ int ret;
+
+ if (offset >= NUM_GPIOS)
+ return GPIOF_INPUT;
+
+ ret = pmic_reg_read(dev->parent, GPIO_REG_ADDR(offset));
+ if (ret < 0) {
+ log_debug("%s: CNFG_GPIOx read failed: %d\n", __func__, ret);
+ return ret;
+ }
+
+ if (ret & MAX77663_CNFG_GPIO_DIR_MASK)
+ return GPIOF_INPUT;
+ else
+ return GPIOF_OUTPUT;
+}
+
+static const struct dm_gpio_ops max77663_gpio_ops = {
+ .direction_input = max77663_gpio_direction_input,
+ .direction_output = max77663_gpio_direction_output,
+ .get_value = max77663_gpio_get_value,
+ .set_value = max77663_gpio_set_value,
+ .get_function = max77663_gpio_get_function,
+};
+
+static int max77663_gpio_probe(struct udevice *dev)
+{
+ struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+ int i, ret;
+
+ uc_priv->gpio_count = NUM_ENTRIES;
+ uc_priv->bank_name = "GPIO";
+
+ /*
+ * GPIO interrupts may be left ON after bootloader, hence let's
+ * pre-initialize hardware to the expected state by disabling all
+ * the interrupts.
+ */
+ for (i = 0; i < NUM_GPIOS; i++) {
+ ret = pmic_clrsetbits(dev->parent, GPIO_REG_ADDR(i),
+ MAX77663_CNFG_IRQ, 0);
+ if (ret < 0) {
+ log_debug("%s: failed to disable interrupt: %d\n", __func__, ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+U_BOOT_DRIVER(max77663_gpio) = {
+ .name = MAX77663_GPIO_DRIVER,
+ .id = UCLASS_GPIO,
+ .probe = max77663_gpio_probe,
+ .ops = &max77663_gpio_ops,
+};
diff --git a/drivers/power/pmic/max77663.c b/drivers/power/pmic/max77663.c
index 68c3cbb..cf08b6a 100644
--- a/drivers/power/pmic/max77663.c
+++ b/drivers/power/pmic/max77663.c
@@ -55,6 +55,15 @@
}
}
+ if (IS_ENABLED(CONFIG_MAX77663_GPIO)) {
+ ret = device_bind_driver(dev, MAX77663_GPIO_DRIVER,
+ "gpio", NULL);
+ if (ret) {
+ log_err("cannot bind GPIOs (ret = %d)\n", ret);
+ return ret;
+ }
+ }
+
regulators_node = dev_read_subnode(dev, "regulators");
if (!ofnode_valid(regulators_node)) {
log_err("%s regulators subnode not found!\n", dev->name);
diff --git a/include/dt-bindings/pmic/max77663.h b/include/dt-bindings/pmic/max77663.h
new file mode 100644
index 0000000..ee169a8
--- /dev/null
+++ b/include/dt-bindings/pmic/max77663.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright(C) 2023 Svyatoslav Ryhel <clamor95@gmail.com>
+ */
+
+#ifndef _DT_BINDINGS_MAX77663_H_
+#define _DT_BINDINGS_MAX77663_H_
+
+/*
+ * MAX77663 has 8 GPIO (0 to 7) and 3 KEYS
+ * KEYS are appended after GPIOs
+ */
+
+#define EN0 10
+#define ACOK 9
+#define LID 8
+
+#endif
diff --git a/include/power/max77663.h b/include/power/max77663.h
index b3ae3da..fcb5916 100644
--- a/include/power/max77663.h
+++ b/include/power/max77663.h
@@ -13,6 +13,7 @@
#define MAX77663_LDO_DRIVER "max77663_ldo"
#define MAX77663_SD_DRIVER "max77663_sd"
#define MAX77663_RST_DRIVER "max77663_rst"
+#define MAX77663_GPIO_DRIVER "max77663_gpio"
/* Step-Down (SD) Regulator calculations */
#define SD_STATUS_MASK 0x30