lcd: Let the board code show board-specific info
The information displayed when CONFIG_LCD_INFO is set is inherently
board-specific, so it should be done by the board code. The current code
dealing with this only handles two cases, and is already a horrible mess
of #ifdeffery.
Yes, this duplicates some code, but it also allows boards to print more
board-specific information; this used to be very difficult.
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
diff --git a/common/lcd.c b/common/lcd.c
index 813c8d8..31bb190 100644
--- a/common/lcd.c
+++ b/common/lcd.c
@@ -52,7 +52,6 @@
#if defined(CONFIG_ATMEL_LCD)
#include <atmel_lcdc.h>
-#include <nand.h>
#endif
/************************************************************************/
@@ -762,15 +761,6 @@
static void *lcd_logo (void)
{
-#ifdef CONFIG_LCD_INFO
- char info[80];
- char temp[32];
-#ifdef CONFIG_ATMEL_LCD
- int i;
- ulong dram_size, nand_size;
-#endif
-#endif /* CONFIG_LCD_INFO */
-
#ifdef CONFIG_SPLASH_SCREEN
char *s;
ulong addr;
@@ -800,75 +790,11 @@
bitmap_plot (0, 0);
#endif /* CONFIG_LCD_LOGO */
-#ifdef CONFIG_MPC823
-# ifdef CONFIG_LCD_INFO
- sprintf (info, "%s (%s - %s) ", U_BOOT_VERSION, __DATE__, __TIME__);
- lcd_drawchars (LCD_INFO_X, LCD_INFO_Y, (uchar *)info, strlen(info));
-
- sprintf (info, "(C) 2008 DENX Software Engineering GmbH");
- lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT,
- (uchar *)info, strlen(info));
-
- sprintf (info, " Wolfgang DENK, wd@denx.de");
- lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 2,
- (uchar *)info, strlen(info));
-# ifdef CONFIG_LCD_INFO_BELOW_LOGO
- sprintf (info, "MPC823 CPU at %s MHz",
- strmhz(temp, gd->cpu_clk));
- lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 3,
- info, strlen(info));
- sprintf (info, " %ld MB RAM, %ld MB Flash",
- gd->ram_size >> 20,
- gd->bd->bi_flashsize >> 20 );
- lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 4,
- info, strlen(info));
-# else
- /* leave one blank line */
-
- sprintf (info, "MPC823 CPU at %s MHz, %ld MB RAM, %ld MB Flash",
- strmhz(temp, gd->cpu_clk),
- gd->ram_size >> 20,
- gd->bd->bi_flashsize >> 20 );
- lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 4,
- (uchar *)info, strlen(info));
-
-# endif /* CONFIG_LCD_INFO_BELOW_LOGO */
-# endif /* CONFIG_LCD_INFO */
-#endif /* CONFIG_MPC823 */
-
-#ifdef CONFIG_ATMEL_LCD
-# ifdef CONFIG_LCD_INFO
- sprintf (info, "%s", U_BOOT_VERSION);
- lcd_drawchars (LCD_INFO_X, LCD_INFO_Y, (uchar *)info, strlen(info));
-
- sprintf (info, "(C) 2008 ATMEL Corp");
- lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT,
- (uchar *)info, strlen(info));
-
- sprintf (info, "at91support@atmel.com");
- lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 2,
- (uchar *)info, strlen(info));
-
- sprintf (info, "%s CPU at %s MHz",
- AT91_CPU_NAME,
- strmhz(temp, AT91_MAIN_CLOCK));
- lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 3,
- (uchar *)info, strlen(info));
-
- dram_size = 0;
- for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
- dram_size += gd->bd->bi_dram[i].size;
- nand_size = 0;
- for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
- nand_size += nand_info[i].size;
- sprintf (info, " %ld MB SDRAM, %ld MB NAND",
- dram_size >> 20,
- nand_size >> 20 );
- lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 4,
- (uchar *)info, strlen(info));
-# endif /* CONFIG_LCD_INFO */
-#endif /* CONFIG_ATMEL_LCD */
-
+#ifdef CONFIG_LCD_INFO
+ console_col = LCD_INFO_X / VIDEO_FONT_WIDTH;
+ console_row = LCD_INFO_Y / VIDEO_FONT_HEIGHT;
+ lcd_show_board_info();
+#endif /* CONFIG_LCD_INFO */
#if defined(CONFIG_LCD_LOGO) && !defined(CONFIG_LCD_INFO_BELOW_LOGO)
return ((void *)((ulong)lcd_base + BMP_LOGO_HEIGHT * lcd_line_length));