arm64: zynqmp: Add support for e-a2197-00 System Controller
Add support for System Controller available on e-a2197-00 base board.
System is very similar to p-a2197-00 board.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 733d0eb..6a7dbb6 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -250,6 +250,7 @@
avnet-ultra96-rev1.dtb \
avnet-ultrazedev-cc-v1.0-ultrazedev-som-v1.0.dtb \
zynqmp-a2197-revA.dtb \
+ zynqmp-e-a2197-00-revA.dtb \
zynqmp-g-a2197-00-revA.dtb \
zynqmp-m-a2197-01-revA.dtb \
zynqmp-m-a2197-02-revA.dtb \
diff --git a/arch/arm/dts/zynqmp-e-a2197-00-revA.dts b/arch/arm/dts/zynqmp-e-a2197-00-revA.dts
new file mode 100644
index 0000000..39b5d7f
--- /dev/null
+++ b/arch/arm/dts/zynqmp-e-a2197-00-revA.dts
@@ -0,0 +1,559 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx Versal a2197 RevA System Controller
+ *
+ * (C) Copyright 2019, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+ model = "Versal System Controller on a2197 Eval board RevA"; /* VCK190/VMK180 */
+ compatible = "xlnx,zynqmp-e-a2197-00-revA", "xlnx,zynqmp-a2197-revA",
+ "xlnx,zynqmp-a2197", "xlnx,zynqmp";
+
+ aliases {
+ ethernet0 = &gem0;
+ gpio0 = &gpio;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ mmc0 = &sdhci1;
+ rtc0 = &rtc;
+ serial0 = &uart0;
+ serial1 = &dcc;
+ };
+
+ chosen {
+ bootargs = "earlycon";
+ stdout-path = "serial0:115200n8";
+ xlnx,eeprom = <&eeprom>;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ ina226-vccint {
+ compatible = "iio-hwmon";
+ io-channels = <&vccint 0>, <&vccint 1>, <&vccint 2>, <&vccint 3>;
+ };
+ ina226-vcc-soc {
+ compatible = "iio-hwmon";
+ io-channels = <&vcc_soc 0>, <&vcc_soc 1>, <&vcc_soc 2>, <&vcc_soc 3>;
+ };
+ ina226-vcc-pmc {
+ compatible = "iio-hwmon";
+ io-channels = <&vcc_pmc 0>, <&vcc_pmc 1>, <&vcc_pmc 2>, <&vcc_pmc 3>;
+ };
+ ina226-vcc-ram {
+ compatible = "iio-hwmon";
+ io-channels = <&vcc_ram 0>, <&vcc_ram 1>, <&vcc_ram 2>, <&vcc_ram 3>;
+ };
+ ina226-vcc-pslp {
+ compatible = "iio-hwmon";
+ io-channels = <&vcc_pslp 0>, <&vcc_pslp 1>, <&vcc_pslp 2>, <&vcc_pslp 3>;
+ };
+ ina226-vcc-psfp {
+ compatible = "iio-hwmon";
+ io-channels = <&vcc_psfp 0>, <&vcc_psfp 1>, <&vcc_psfp 2>, <&vcc_psfp 3>;
+ };
+ ina226-vccaux {
+ compatible = "iio-hwmon";
+ io-channels = <&vccaux 0>, <&vccaux 1>, <&vccaux 2>, <&vccaux 3>;
+ };
+ ina226-vccaux-pmc {
+ compatible = "iio-hwmon";
+ io-channels = <&vccaux_pmc 0>, <&vccaux_pmc 1>, <&vccaux_pmc 2>, <&vccaux_pmc 3>;
+ };
+ ina226-vcco-500 {
+ compatible = "iio-hwmon";
+ io-channels = <&vcco_500 0>, <&vcco_500 1>, <&vcco_500 2>, <&vcco_500 3>;
+ };
+ ina226-vcco-501 {
+ compatible = "iio-hwmon";
+ io-channels = <&vcco_501 0>, <&vcco_501 1>, <&vcco_501 2>, <&vcco_501 3>;
+ };
+ ina226-vcco-502 {
+ compatible = "iio-hwmon";
+ io-channels = <&vcco_502 0>, <&vcco_502 1>, <&vcco_502 2>, <&vcco_502 3>;
+ };
+ ina226-vcco-503 {
+ compatible = "iio-hwmon";
+ io-channels = <&vcco_503 0>, <&vcco_503 1>, <&vcco_503 2>, <&vcco_503 3>;
+ };
+ ina226-vcc-1v8 {
+ compatible = "iio-hwmon";
+ io-channels = <&vcc_1v8 0>, <&vcc_1v8 1>, <&vcc_1v8 2>, <&vcc_1v8 3>;
+ };
+ ina226-vcc-3v3 {
+ compatible = "iio-hwmon";
+ io-channels = <&vcc_3v3 0>, <&vcc_3v3 1>, <&vcc_3v3 2>, <&vcc_3v3 3>;
+ };
+ ina226-vcc-1v2-ddr4 {
+ compatible = "iio-hwmon";
+ io-channels = <&vcc_1v2_ddr4 0>, <&vcc_1v2_ddr4 1>, <&vcc_1v2_ddr4 2>, <&vcc_1v2_ddr4 3>;
+ };
+ ina226-vcc-1v1-lp4 {
+ compatible = "iio-hwmon";
+ io-channels = <&vcc1v1_lp4 0>, <&vcc1v1_lp4 1>, <&vcc1v1_lp4 2>, <&vcc1v1_lp4 3>;
+ };
+ ina226-vadj-fmc {
+ compatible = "iio-hwmon";
+ io-channels = <&vadj_fmc 0>, <&vadj_fmc 1>, <&vadj_fmc 2>, <&vadj_fmc 3>;
+ };
+ ina226-mgtyavcc {
+ compatible = "iio-hwmon";
+ io-channels = <&mgtyavcc 0>, <&mgtyavcc 1>, <&mgtyavcc 2>, <&mgtyavcc 3>;
+ };
+ ina226-mgtyavtt {
+ compatible = "iio-hwmon";
+ io-channels = <&mgtyavtt 0>, <&mgtyavtt 1>, <&mgtyavtt 2>, <&mgtyavtt 3>;
+ };
+ ina226-mgtyvccaux {
+ compatible = "iio-hwmon";
+ io-channels = <&mgtyvccaux 0>, <&mgtyvccaux 1>, <&mgtyvccaux 2>, <&mgtyvccaux 3>;
+ };
+};
+
+&uart0 { /* uart0 MIO38-39 */
+ status = "okay";
+ u-boot,dm-pre-reloc;
+};
+
+&sdhci1 { /* sd1 MIO45-51 cd in place */
+ status = "okay";
+ no-1-8-v;
+ disable-wp;
+ xlnx,mio_bank = <1>;
+};
+
+&gem0 {
+ status = "okay";
+ phy-handle = <&phy0>;
+ phy-mode = "sgmii";
+ is-internal-pcspma;
+ phy0: ethernet-phy@0 { /* u131 M88E1512 */
+ reg = <0>;
+ };
+};
+
+&gpio {
+ status = "okay";
+ gpio-line-names = "", "", "", "", "", /* 0 - 4 */
+ "", "", "DC_SYS_CTRL0", "DC_SYS_CTRL1", "DC_SYS_CTRL2", /* 5 - 9 */
+ "DC_SYS_CTRL3", "ZU4_TRIGGER", "SYSCTLR_PB", "", "", /* 10 - 14 */
+ "", "", "", "", "", /* 15 - 19 */
+ "", "", "", "", "", /* 20 - 24 */
+ "", "", "", "", "", /* 25 - 29 */
+ "", "", "", "", "LP_I2C0_PMC_SCL", /* 30 - 34 */
+ "LP_I2C0_PMC_SDA", "LP_I2C1_SCL", "LP_I2C1_SDA", "UART0_RXD_IN", "UART0_TXD_OUT", /* 35 - 39 */
+ "", "", "ETH_RESET_B", "", "", /* 40 - 44 */
+ "SD1_CD_B", "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3", /* 45 - 49 */
+ "SD1_CMD", "SD1_CLK", "", "", "", /* 50 - 54 */
+ "", "", "", "", "", /* 55 - 59 */
+ "", "", "", "", "", /* 60 - 64 */
+ "", "", "", "", "", /* 65 - 69 */
+ "", "", "", "", "", /* 70 - 74 */
+ "", "ETH_MDC", "ETH_MDIO", /* 75 - 77, MIO end and EMIO start */
+ "", "", /* 78 - 79 */
+ "", "", "", "", "", /* 80 - 84 */
+ "", "", "", "", "", /* 85 -89 */
+ "", "", "", "", "", /* 90 - 94 */
+ "", "", "", "", "", /* 95 - 99 */
+ "", "", "", "", "", /* 100 - 104 */
+ "", "", "", "", "", /* 105 - 109 */
+ "", "", "", "", "", /* 110 - 114 */
+ "", "", "", "", "", /* 115 - 119 */
+ "", "", "", "", "", /* 120 - 124 */
+ "", "", "", "", "", /* 125 - 129 */
+ "", "", "", "", "", /* 130 - 134 */
+ "", "", "", "", "", /* 135 - 139 */
+ "", "", "", "", "", /* 140 - 144 */
+ "", "", "", "", "", /* 145 - 149 */
+ "", "", "", "", "", /* 150 - 154 */
+ "", "", "", "", "", /* 155 - 159 */
+ "", "", "", "", "", /* 160 - 164 */
+ "", "", "", "", "", /* 165 - 169 */
+ "", "", "", ""; /* 170 - 174 */
+};
+
+&i2c0 { /* MIO 34-35 - can't stay here */
+ status = "okay";
+ clock-frequency = <400000>;
+ i2c-mux@74 { /* u33 */
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+ /* reset-gpios = <&gpio SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */
+ i2c@0 { /* PMBUS */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /* u152 IR35215 0x16/0x46 vcc_soc */
+ /* u160 IRPS5401 0x17/0x47 */
+ /* u167 IRPS5401 0x1c/0x4c */
+ /* u175 IRPS5401 0x1d/0x4d */
+ /* u179 ir38164 0x19/0x49 vcco_500 */
+ /* u181 ir38164 0x1a/0x4a vcco_501 */
+ /* u183 ir38164 0x1b/0x4b vcco_502 */
+ /* u185 ir38164 0x1e/0x4e vadj_fmc */
+ /* u187 ir38164 0x1F/0x4f mgtyavcc */
+ /* u189 ir38164 0x20/0x50 mgtyavtt */
+ /* u194 ir38164 0x13/0x43 vdd1_1v8_lp4 */
+ /* u195 ir38164 0x14/0x44 vdd2_1v8_lp4 */
+ };
+ i2c@1 { /* PMBUS1_INA226 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /* FIXME check alerts coming to SC */
+ vccint: ina226@40 { /* u65 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-vccint";
+ reg = <0x40>;
+ shunt-resistor = <5000>; /* R440 */
+ /* 0.78V @ 32A 1 of 6 Phases*/
+ };
+ vcc_soc: ina226@41 { /* u161 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-vcc-soc";
+ reg = <0x41>;
+ shunt-resistor = <2000>; /* R1186 */
+ /* 0.78V @ 18A */
+ };
+ vcc_pmc: ina226@42 { /* u163 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-vcc-pmc";
+ reg = <0x42>;
+ shunt-resistor = <5000>; /* R1214 */
+ /* 0.78V @ 500mA */
+ };
+ vcc_ram: ina226@43 { /* u162 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-vcc-ram";
+ reg = <0x43>;
+ shunt-resistor = <5000>; /* r1221 */
+ /* 0.78V @ 4A */
+ };
+ vcc_pslp: ina226@44 { /* u165 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-vcc-pslp";
+ reg = <0x44>;
+ shunt-resistor = <5000>; /* R1216 */
+ /* 0.78V @ 1A */
+ };
+ vcc_psfp: ina226@45 { /* u164 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-vcc-psfp";
+ reg = <0x45>;
+ shunt-resistor = <5000>; /* R1219 */
+ /* 0.78V @ 2A */
+ };
+ };
+ i2c@2 { /* PCIE_CLK */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ clock_8t49n287: clock-generator@d8 { /* u39 8T49N240 */
+ #clock-cells = <1>; /* author David Cater <david.cater@idt.com>*/
+ compatible = "idt,8t49n240", "idt,8t49n241"; /* FIXME no driver for 240 */
+ reg = <0xd8>;
+ /* Documentation/devicetree/bindings/clock/idt,idt8t49n24x.txt */
+ /* FIXME there input via J241 Samtec CLK1 and CLK0 from U38 - selection PIN */
+ };
+ };
+ i2c@3 { /* PMBUS2_INA226 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ /* FIXME check alerts coming to SC */
+ vccaux: ina226@40 { /* u166 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-vccaux";
+ reg = <0x40>;
+ shunt-resistor = <5000>; /* R382 */
+ /* 1.5V @ 3A */
+ };
+ vccaux_pmc: ina226@41 { /* u168 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-vccaux-pmc";
+ reg = <0x41>;
+ shunt-resistor = <5000>; /* R1246 */
+ /* 1.5V @ 500mA */
+ };
+ vcco_500: ina226@42 { /* u178 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-vcco-500";
+ reg = <0x42>;
+ shunt-resistor = <2000>; /* R1300 */
+ /* 3.3V @ 5A */
+ };
+ vcco_501: ina226@43 { /* u180 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-vcco-501";
+ reg = <0x43>;
+ shunt-resistor = <2000>; /* R1313 */
+ /* 3.3V @ 5A */
+ };
+ vcco_502: ina226@44 { /* u182 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-vcco-502";
+ reg = <0x44>;
+ shunt-resistor = <2000>; /* R1330 */
+ /* 3.3V @ 5A */
+ };
+ vcco_503: ina226@45 { /* u172 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-vcco-503";
+ reg = <0x45>;
+ shunt-resistor = <5000>; /* R1229 */
+ /* 1.8V @ 2A */
+ };
+ vcc_1v8: ina226@46 { /* u173 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-vcc-1v8";
+ reg = <0x46>;
+ shunt-resistor = <5000>; /* R400 */
+ /* 1.8V @ 6A */
+ };
+ vcc_3v3: ina226@47 { /* u174 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-vcc-3v3";
+ reg = <0x47>;
+ shunt-resistor = <5000>; /* R1232 */
+ /* 3.3V @ 500mA */
+ };
+ vcc_1v2_ddr4: ina226@48 { /* u176 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-vcc-1v2-ddr4";
+ reg = <0x48>;
+ shunt-resistor = <5000>; /* R1275 */
+ /* 1.2V @ 4A */
+ };
+ vcc1v1_lp4: ina226@49 { /* u177 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-vcc1v1-lp4";
+ reg = <0x49>;
+ shunt-resistor = <5000>; /* R1286 */
+ /* 1.1V @ 4A */
+ };
+ vadj_fmc: ina226@4a { /* u184 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-vadj-fmc";
+ reg = <0x4a>;
+ shunt-resistor = <2000>; /* R1350 */
+ /* 1.5V @ 10A */
+ };
+ mgtyavcc: ina226@4b { /* u186 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-mgtyavcc";
+ reg = <0x4b>;
+ shunt-resistor = <2000>; /* R1367 */
+ /* 0.88V @ 6A */
+ };
+ mgtyavtt: ina226@4c { /* u188 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-mgtyavtt";
+ reg = <0x4c>;
+ shunt-resistor = <2000>; /* R1384 */
+ /* 1.2V @ 10A */
+ };
+ mgtyvccaux: ina226@4d { /* u234 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-mgtyvccaux";
+ reg = <0x4d>;
+ shunt-resistor = <5000>; /* r1679 */
+ /* 1.5V @ 500mA */
+ };
+ };
+ i2c@4 { /* LP_I2C_SM */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ /* FIXME wires ready but chip is missing */
+ };
+ i2c@5 { /* zSFP_SI570 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ si570_zsfp: clock-generator@5d { /* u192 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x5d>;
+ temperature-stability = <50>;
+ factory-fout = <156250000>;
+ clock-frequency = <156250000>;
+ clock-output-names = "si570_hsdp_clk";
+ };
+ };
+ i2c@6 { /* USER_SI570_1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ si570_user1_clk: clock-generator@5d { /* u205 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x5f>;
+ temperature-stability = <50>;
+ factory-fout = <100000000>;
+ clock-frequency = <100000000>;
+ clock-output-names = "si570_user1";
+ };
+
+ };
+ i2c@7 { /* USER_SI570_2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ /* FIXME wires ready but chip is missing */
+ };
+ };
+};
+
+&i2c1 { /* i2c1 MIO 36-37 */
+ status = "okay";
+ clock-frequency = <400000>;
+
+ i2c-mux@74 { /* u35 */
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+ /* reset-gpios = <&gpio SYSCTLR_IIC_MUX1_RESET_B GPIO_ACTIVE_HIGH>; */
+ dc_i2c: i2c@0 { /* DC_I2C */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /* Use for storing information about SC board */
+ eeprom: eeprom@54 { /* u34 - m24128 16kB */
+ compatible = "st,24c128", "atmel,24c128";
+ reg = <0x54>; /* 0x5c too */
+ };
+ si570_ref_clk: clock-generator@5d { /* u32 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x5d>;
+ temperature-stability = <50>;
+ factory-fout = <33333333>;
+ clock-frequency = <33333333>;
+ clock-output-names = "ref_clk";
+ };
+ /* and connector J212D */
+ };
+ fmc1: i2c@1 { /* FMCP1_IIC */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /* FIXME connection to Samtec J51C */
+ /* expected eeprom 0x50 FMC cards */
+ };
+ fmc2: i2c@2 { /* FMCP2_IIC */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ /* FIXME connection to Samtec J53C */
+ /* expected eeprom 0x50 FMC cards */
+ };
+ i2c@3 { /* DDR4_DIMM1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ si570_ddr_dimm1: clock-generator@60 { /* u2 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x60>;
+ temperature-stability = <50>;
+ factory-fout = <200000000>;
+ clock-frequency = <200000000>;
+ clock-output-names = "si570_ddrdimm1_clk";
+ };
+ };
+ i2c@4 { /* LPDDR4_SI570_CLK2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ si570_ddr_dimm2: clock-generator@60 { /* u3 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x60>;
+ temperature-stability = <50>;
+ factory-fout = <200000000>;
+ clock-frequency = <200000000>;
+ clock-output-names = "si570_lpddr4_clk2";
+ };
+ };
+ i2c@5 { /* LPDDR4_SI570_CLK1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ si570_lpddr4: clock-generator@60 { /* u4 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x60>;
+ temperature-stability = <50>;
+ factory-fout = <200000000>;
+ clock-frequency = <200000000>;
+ clock-output-names = "si570_lpddr4_clk1";
+ };
+ };
+ i2c@6 { /* HSDP_SI570 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ si570_hsdp: clock-generator@5d { /* u5 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x5d>;
+ temperature-stability = <50>;
+ factory-fout = <156250000>;
+ clock-frequency = <156250000>;
+ clock-output-names = "si570_hsdp_clk";
+ };
+ };
+ i2c@7 { /* 8A34001 - U219B and J310 connector */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+&xilinx_ams {
+ status = "okay";
+};
+
+&ams_ps {
+ status = "okay";
+};
+
+&ams_pl {
+ status = "okay";
+};