serial: stm32x7: add STM32F4 support
stm32f4 doesn't support FIFO and OVERRUN feature.
The enable bit is not at the same location in CR1
register than for STM32F7 and STM32H7.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 9bf2e26..7c54a49 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -531,9 +531,9 @@
config STM32X7_SERIAL
bool "STMicroelectronics STM32 SoCs on-chip UART"
- depends on DM_SERIAL && (STM32F7 || STM32H7)
+ depends on DM_SERIAL && (STM32F4 || STM32F7 || STM32H7)
help
- If you have a machine based on a STM32 F7 or H7 SoC you can
+ If you have a machine based on a STM32 F4, F7 or H7 SoC you can
enable its onboard serial ports, say Y to this option.
If unsure, say N.
diff --git a/drivers/serial/serial_stm32x7.c b/drivers/serial/serial_stm32x7.c
index 19697e3..44e8b42 100644
--- a/drivers/serial/serial_stm32x7.c
+++ b/drivers/serial/serial_stm32x7.c
@@ -127,6 +127,7 @@
#if CONFIG_IS_ENABLED(OF_CONTROL)
static const struct udevice_id stm32_serial_id[] = {
+ { .compatible = "st,stm32-uart", .data = (ulong)&stm32f4_info},
{ .compatible = "st,stm32f7-uart", .data = (ulong)&stm32f7_info},
{ .compatible = "st,stm32h7-uart", .data = (ulong)&stm32h7_info},
{}
diff --git a/drivers/serial/serial_stm32x7.h b/drivers/serial/serial_stm32x7.h
index ed8a3ee..b914edf 100644
--- a/drivers/serial/serial_stm32x7.h
+++ b/drivers/serial/serial_stm32x7.h
@@ -27,6 +27,13 @@
bool has_fifo;
};
+struct stm32_uart_info stm32f4_info = {
+ .stm32f4 = true,
+ .uart_enable_bit = 13,
+ .has_overrun_disable = false,
+ .has_fifo = false,
+};
+
struct stm32_uart_info stm32f7_info = {
.uart_enable_bit = 0,
.stm32f4 = false,