dm: Add support for RAM drivers
Add support for a driver which sets up DRAM and can return information about
the amount of RAM available. This is a first step towards moving RAM init
to driver model.
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/drivers/ram/Kconfig b/drivers/ram/Kconfig
new file mode 100644
index 0000000..642a2d8
--- /dev/null
+++ b/drivers/ram/Kconfig
@@ -0,0 +1,18 @@
+config RAM
+ bool "Enable RAM drivers using Driver Model"
+ depends on DM
+ help
+ This allows drivers to be provided for SDRAM and other RAM
+ controllers and their type to be specified in the board's device
+ tree. Generally some parameters are required to set up the RAM and
+ the RAM size can either be statically defined or dynamically
+ detected.
+
+config SPL_RAM_SUPPORT
+ bool "Enable RAM support in SPL"
+ depends on RAM
+ help
+ The RAM subsystem adds a small amount of overhead to the image.
+ If this is acceptable and you have a need to use RAM drivers in
+ SPL, enable this option. It might provide a cleaner interface to
+ setting up RAM (e.g. SDRAM / DDR) within SPL.
diff --git a/drivers/ram/Makefile b/drivers/ram/Makefile
new file mode 100644
index 0000000..4494d81
--- /dev/null
+++ b/drivers/ram/Makefile
@@ -0,0 +1,7 @@
+#
+# Copyright (c) 2015 Google, Inc
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+obj-$(CONFIG_RAM) += ram-uclass.o
diff --git a/drivers/ram/ram-uclass.c b/drivers/ram/ram-uclass.c
new file mode 100644
index 0000000..2f1fbe7
--- /dev/null
+++ b/drivers/ram/ram-uclass.c
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2015 Google, Inc
+ * Written by Simon Glass <sjg@chromium.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <ram.h>
+#include <dm.h>
+#include <errno.h>
+#include <dm/lists.h>
+#include <dm/root.h>
+
+int ram_get_info(struct udevice *dev, struct ram_info *info)
+{
+ struct ram_ops *ops = ram_get_ops(dev);
+
+ if (!ops->get_info)
+ return -ENOSYS;
+
+ return ops->get_info(dev, info);
+}
+
+UCLASS_DRIVER(ram) = {
+ .id = UCLASS_RAM,
+ .name = "ram",
+};