Add missing Blackfin files.
diff --git a/board/ezkit533/ezkit533.c b/board/ezkit533/ezkit533.c
new file mode 100644
index 0000000..f8ee900
--- /dev/null
+++ b/board/ezkit533/ezkit533.c
@@ -0,0 +1,71 @@
+/*
+ * U-boot - ezkit533.c
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#if defined(CONFIG_MISC_INIT_R)
+#include "psd4256.h"
+#endif
+
+int checkboard(void)
+{
+ printf("CPU: ADSP BF533 Rev.: 0.%d\n", *pCHIPID >> 28);
+ printf("Board: ADI BF533 EZ-Kit Lite board\n");
+ printf(" Support: http://blackfin.uclinux.org/\n");
+ printf(" Richard Klingler <richard@uclinux.net>\n");
+ return 0;
+}
+
+long int initdram(int board_type)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+#ifdef DEBUG
+ int brate;
+ char *tmp = getenv("baudrate");
+ brate = simple_strtoul(tmp, NULL, 16);
+ printf("Serial Port initialized with Baud rate = %x\n",brate);
+ printf("SDRAM attributes:\n");
+ printf("tRCD %d SCLK Cycles,tRP %d SCLK Cycles,tRAS %d SCLK Cycles"
+ "tWR %d SCLK Cycles,CAS Latency %d SCLK cycles \n",
+ 3, 3, 6, 2, 3);
+ printf("SDRAM Begin: 0x%x\n", CFG_SDRAM_BASE);
+ printf("Bank size = %d MB\n", CFG_MAX_RAM_SIZE >> 20);
+#endif
+ gd->bd->bi_memstart = CFG_SDRAM_BASE;
+ gd->bd->bi_memsize = CFG_MAX_RAM_SIZE;
+ return CFG_MAX_RAM_SIZE;
+}
+
+#if defined(CONFIG_MISC_INIT_R)
+/* miscellaneous platform dependent initialisations */
+int misc_init_r(void)
+{
+ /* Set direction bits for Video en/decoder reset as output */
+ *(volatile unsigned char *)(CFG_FLASH1_BASE + PSD_PORTA_DIR) = PSDA_VDEC_RST | PSDA_VENC_RST;
+ /* Deactivate Video en/decoder reset lines */
+ *(volatile unsigned char *)(CFG_FLASH1_BASE + PSD_PORTA_DOUT) = PSDA_VDEC_RST | PSDA_VENC_RST;
+}
+#endif