rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/board/Marvell/common/flash.c b/board/Marvell/common/flash.c
index 3603372..21eae0e 100644
--- a/board/Marvell/common/flash.c
+++ b/board/Marvell/common/flash.c
@@ -48,7 +48,7 @@
int flash_erase_intel (flash_info_t * info, int s_first, int s_last);
int write_word_intel (bank_addr_t addr, bank_word_t value);
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
/*-----------------------------------------------------------------------
* Functions
@@ -68,14 +68,14 @@
unsigned long base, flash_size;
/* Init: no FLASHes known */
- for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
/* the boot flash */
- base = CFG_FLASH_BASE;
+ base = CONFIG_SYS_FLASH_BASE;
size_b0 =
- flash_get_size (CFG_BOOT_FLASH_WIDTH, (vu_long *) base,
+ flash_get_size (CONFIG_SYS_BOOT_FLASH_WIDTH, (vu_long *) base,
&flash_info[0]);
printf ("[%ldkB@%lx] ", size_b0 / 1024, base);
@@ -84,11 +84,11 @@
printf ("## Unknown FLASH at %08lx: Size = 0x%08lx = %ld MB\n", base, size_b0, size_b0 << 20);
}
- base = memoryGetDeviceBaseAddress (CFG_EXTRA_FLASH_DEVICE);
+ base = memoryGetDeviceBaseAddress (CONFIG_SYS_EXTRA_FLASH_DEVICE);
/* base = memoryGetDeviceBaseAddress(DEV_CS3_BASE_ADDR);*/
- for (i = 1; i < CFG_MAX_FLASH_BANKS; i++) {
+ for (i = 1; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
unsigned long size =
- flash_get_size (CFG_EXTRA_FLASH_WIDTH,
+ flash_get_size (CONFIG_SYS_EXTRA_FLASH_WIDTH,
(vu_long *) base, &flash_info[i]);
printf ("[%ldMB@%lx] ", size >> 20, base);
@@ -617,7 +617,7 @@
/* has the timeout limit been reached? */
if (get_timer (start)
>
- CFG_FLASH_ERASE_TOUT)
+ CONFIG_SYS_FLASH_ERASE_TOUT)
{
/* timeout limit reached */
printf ("Time out limit reached erasing sector at address %08lx\n", info->start[sect]);
@@ -776,7 +776,7 @@
addr = (volatile unsigned char *) (info->start[l_sect]);
/* broken for 2x16: TODO */
while ((addr[0] & 0x80) != 0x80) {
- if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+ if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
return 1;
}
@@ -956,7 +956,7 @@
{
/* has the timeout limit been reached? */
if (get_timer (start) >
- CFG_FLASH_WRITE_TOUT) {
+ CONFIG_SYS_FLASH_WRITE_TOUT) {
/* timeout limit reached */
printf ("Time out limit reached programming address %08lx with data %08lx\n", dest, data);
/* reset the flash */
@@ -1064,7 +1064,7 @@
/* data polling for D7 */
start = get_timer (0);
while ((*((vu_long *) dest) & 0x00800080) != (data & 0x00800080)) {
- if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
return (1);
}
}
diff --git a/board/Marvell/common/i2c.c b/board/Marvell/common/i2c.c
index 32b2b30..d426044 100644
--- a/board/Marvell/common/i2c.c
+++ b/board/Marvell/common/i2c.c
@@ -48,7 +48,7 @@
unsigned int actualN = 0, actualM = 0;
unsigned int control, status;
unsigned int minMargin = 0xffffffff;
- unsigned int tclk = CFG_TCLK;
+ unsigned int tclk = CONFIG_SYS_TCLK;
unsigned int i2cFreq = speed; /* 100000 max. Fast mode not supported */
DP (puts ("i2c_init\n"));
@@ -372,7 +372,7 @@
int len)
{
uchar status = 0;
- unsigned int i2cFreq = CFG_I2C_SPEED;
+ unsigned int i2cFreq = CONFIG_SYS_I2C_SPEED;
DP (puts ("i2c_read\n"));
@@ -447,7 +447,7 @@
int len)
{
uchar status = 0;
- unsigned int i2cFreq = CFG_I2C_SPEED;
+ unsigned int i2cFreq = CONFIG_SYS_I2C_SPEED;
DP (puts ("i2c_write\n"));
@@ -500,7 +500,7 @@
unsigned int i2c_status;
#endif
uchar status = 0;
- unsigned int i2cFreq = CFG_I2C_SPEED;
+ unsigned int i2cFreq = CONFIG_SYS_I2C_SPEED;
DP (puts ("i2c_probe\n"));
diff --git a/board/Marvell/common/intel_flash.c b/board/Marvell/common/intel_flash.c
index d26f883..42b3ee1 100644
--- a/board/Marvell/common/intel_flash.c
+++ b/board/Marvell/common/intel_flash.c
@@ -152,7 +152,7 @@
/* data polling for D7 */
start = get_timer (0);
do {
- if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
retval = 1;
goto done;
}
@@ -227,7 +227,7 @@
do {
now = get_timer (start);
- if (now - estart > CFG_FLASH_ERASE_TOUT) {
+ if (now - estart > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout (sect %d)\n", sect);
haderr = 1;
break;
diff --git a/board/Marvell/common/intel_flash.h b/board/Marvell/common/intel_flash.h
index 666a4cd..bd8941e 100644
--- a/board/Marvell/common/intel_flash.h
+++ b/board/Marvell/common/intel_flash.h
@@ -68,7 +68,7 @@
/* ID and Lock Configuration */
#define CHIP_RD_ID_LOCK 0x01 /* Bit 0 of each byte */
#define CHIP_RD_ID_MAN 0x89 /* Manufacturer code = 0x89 */
-#define CHIP_RD_ID_DEV CFG_FLASH_ID
+#define CHIP_RD_ID_DEV CONFIG_SYS_FLASH_ID
/* dimensions */
#define CHIP_WIDTH 2 /* chips are in 16 bit mode */
diff --git a/board/Marvell/common/misc.S b/board/Marvell/common/misc.S
index 41c3a95..b3a0898 100644
--- a/board/Marvell/common/misc.S
+++ b/board/Marvell/common/misc.S
@@ -16,7 +16,7 @@
board_relocate_rom:
mflr r7
/* update the location of the GT registers */
- lis r11, CFG_GT_REGS@h
+ lis r11, CONFIG_SYS_GT_REGS@h
/* if we're using ECC, we must use the DMA engine to copy ourselves */
bl start_idma_transfer_0
bl wait_for_idma_0
@@ -29,12 +29,12 @@
board_init_ecc:
mflr r7
/* NOTE: r10 still contains the location we've been relocated to
- * which happens to be TOP_OF_RAM - CFG_MONITOR_LEN */
+ * which happens to be TOP_OF_RAM - CONFIG_SYS_MONITOR_LEN */
/* now that we're running from ram, init the rest of main memory
* for ECC use */
- lis r8, CFG_MONITOR_LEN@h
- ori r8, r8, CFG_MONITOR_LEN@l
+ lis r8, CONFIG_SYS_MONITOR_LEN@h
+ ori r8, r8, CONFIG_SYS_MONITOR_LEN@l
divw r3, r10, r8
@@ -120,15 +120,15 @@
blr
#endif
-#ifdef CFG_BOARD_ASM_INIT
+#ifdef CONFIG_SYS_BOARD_ASM_INIT
/* NOTE: trashes r3-r7 */
.globl board_asm_init
board_asm_init:
/* just move the GT registers to where they belong */
- lis r3, CFG_DFL_GT_REGS@h
- ori r3, r3, CFG_DFL_GT_REGS@l
- lis r4, CFG_GT_REGS@h
- ori r4, r4, CFG_GT_REGS@l
+ lis r3, CONFIG_SYS_DFL_GT_REGS@h
+ ori r3, r3, CONFIG_SYS_DFL_GT_REGS@l
+ lis r4, CONFIG_SYS_GT_REGS@h
+ ori r4, r4, CONFIG_SYS_GT_REGS@l
li r5, INTERNAL_SPACE_DECODE
/* test to see if we've already moved */
diff --git a/board/Marvell/common/ns16550.c b/board/Marvell/common/ns16550.c
index 475445b..7fbf28a 100644
--- a/board/Marvell/common/ns16550.c
+++ b/board/Marvell/common/ns16550.c
@@ -1,7 +1,7 @@
/*
* COM1 NS16550 support
* originally from linux source (arch/ppc/boot/ns16550.c)
- * modified to use CFG_ISA_MEM and new defines
+ * modified to use CONFIG_SYS_ISA_MEM and new defines
*
* further modified by Josh Huber <huber@mclx.com> to support
* the DUART on the Galileo Eval board. (db64360)
@@ -13,8 +13,8 @@
#ifdef ZUMA_NTL
/* no 16550 device */
#else
-const NS16550_t COM_PORTS[] = { (NS16550_t) (CFG_DUART_IO + 0),
- (NS16550_t) (CFG_DUART_IO + 0x20)
+const NS16550_t COM_PORTS[] = { (NS16550_t) (CONFIG_SYS_DUART_IO + 0),
+ (NS16550_t) (CONFIG_SYS_DUART_IO + 0x20)
};
volatile struct NS16550 *NS16550_init (int chan, int baud_divisor)
diff --git a/board/Marvell/common/ns16550.h b/board/Marvell/common/ns16550.h
index f2ed2ab..b9691ab 100644
--- a/board/Marvell/common/ns16550.h
+++ b/board/Marvell/common/ns16550.h
@@ -2,7 +2,7 @@
* NS16550 Serial Port
* originally from linux source (arch/ppc/boot/ns16550.h)
* modified slightly to
- * have addresses as offsets from CFG_ISA_BASE
+ * have addresses as offsets from CONFIG_SYS_ISA_BASE
* added a few more definitions
* added prototypes for ns16550.c
* reduced no of com ports to 2
diff --git a/board/Marvell/common/serial.c b/board/Marvell/common/serial.c
index 01efbea..3e7f406 100644
--- a/board/Marvell/common/serial.c
+++ b/board/Marvell/common/serial.c
@@ -52,17 +52,17 @@
int serial_init (void)
{
-#if (defined CFG_INIT_CHAN1) || (defined CFG_INIT_CHAN2)
+#if (defined CONFIG_SYS_INIT_CHAN1) || (defined CONFIG_SYS_INIT_CHAN2)
int clock_divisor = 230400 / gd->baudrate;
#endif
mpsc_init (gd->baudrate);
/* init the DUART chans so that KGDB in the kernel can use them */
-#ifdef CFG_INIT_CHAN1
+#ifdef CONFIG_SYS_INIT_CHAN1
NS16550_reinit (COM_PORTS[0], clock_divisor);
#endif
-#ifdef CFG_INIT_CHAN2
+#ifdef CONFIG_SYS_INIT_CHAN2
NS16550_reinit (COM_PORTS[1], clock_divisor);
#endif
return (0);
@@ -97,10 +97,10 @@
{
int clock_divisor = 230400 / gd->baudrate;
-#ifdef CFG_INIT_CHAN1
+#ifdef CONFIG_SYS_INIT_CHAN1
(void) NS16550_init (0, clock_divisor);
#endif
-#ifdef CFG_INIT_CHAN2
+#ifdef CONFIG_SYS_INIT_CHAN2
(void) NS16550_init (1, clock_divisor);
#endif
return (0);
@@ -109,29 +109,29 @@
void serial_putc (const char c)
{
if (c == '\n')
- NS16550_putc (COM_PORTS[CFG_DUART_CHAN], '\r');
+ NS16550_putc (COM_PORTS[CONFIG_SYS_DUART_CHAN], '\r');
- NS16550_putc (COM_PORTS[CFG_DUART_CHAN], c);
+ NS16550_putc (COM_PORTS[CONFIG_SYS_DUART_CHAN], c);
}
int serial_getc (void)
{
- return NS16550_getc (COM_PORTS[CFG_DUART_CHAN]);
+ return NS16550_getc (COM_PORTS[CONFIG_SYS_DUART_CHAN]);
}
int serial_tstc (void)
{
- return NS16550_tstc (COM_PORTS[CFG_DUART_CHAN]);
+ return NS16550_tstc (COM_PORTS[CONFIG_SYS_DUART_CHAN]);
}
void serial_setbrg (void)
{
int clock_divisor = 230400 / gd->baudrate;
-#ifdef CFG_INIT_CHAN1
+#ifdef CONFIG_SYS_INIT_CHAN1
NS16550_reinit (COM_PORTS[0], clock_divisor);
#endif
-#ifdef CFG_INIT_CHAN2
+#ifdef CONFIG_SYS_INIT_CHAN2
NS16550_reinit (COM_PORTS[1], clock_divisor);
#endif
}
diff --git a/board/Marvell/db64360/db64360.c b/board/Marvell/db64360/db64360.c
index c03d03d..35b695e 100644
--- a/board/Marvell/db64360/db64360.c
+++ b/board/Marvell/db64360/db64360.c
@@ -55,7 +55,7 @@
/* ------------------------------------------------------------------------- */
/* this is the current GT register space location */
-/* it starts at CFG_DFL_GT_REGS but moves later to CFG_GT_REGS */
+/* it starts at CONFIG_SYS_DFL_GT_REGS but moves later to CONFIG_SYS_GT_REGS */
/* Unfortunately, we cant change it while we are in flash, so we initialize it
* to the "final" value. This means that any debug_led calls before
@@ -64,7 +64,7 @@
*/
void board_prebootm_init (void);
-unsigned int INTERNAL_REG_BASE_ADDR = CFG_GT_REGS;
+unsigned int INTERNAL_REG_BASE_ADDR = CONFIG_SYS_GT_REGS;
int display_mem_map (void);
/* ------------------------------------------------------------------------- */
@@ -127,7 +127,7 @@
GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val);
GT_REG_WRITE (PCI_0_CONFIG_DATA_VIRTUAL_REG,
- (stat & 0xffff0000) | CFG_PCI_IDSEL);
+ (stat & 0xffff0000) | CONFIG_SYS_PCI_IDSEL);
}
if ((GTREGREAD (PCI_1_MODE) & (BIT4 | BIT5)) != 0) { /*if PCI-X */
@@ -136,7 +136,7 @@
GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val);
GT_REG_WRITE (PCI_1_CONFIG_DATA_VIRTUAL_REG,
- (stat & 0xffff0000) | CFG_PCI_IDSEL);
+ (stat & 0xffff0000) | CONFIG_SYS_PCI_IDSEL);
}
/* Enable master */
@@ -154,21 +154,21 @@
/* ronen- add write to pci remap registers for 64460.
in 64360 when writing to pci base go and overide remap automaticaly,
in 64460 it doesn't */
- GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CFG_PCI0_IO_BASE >> 16);
- GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CFG_PCI0_IO_BASE >> 16);
- GT_REG_WRITE (PCI_0_IO_SIZE, (CFG_PCI0_IO_SIZE - 1) >> 16);
+ GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CONFIG_SYS_PCI0_IO_BASE >> 16);
+ GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CONFIG_SYS_PCI0_IO_BASE >> 16);
+ GT_REG_WRITE (PCI_0_IO_SIZE, (CONFIG_SYS_PCI0_IO_SIZE - 1) >> 16);
- GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CFG_PCI0_MEM_BASE >> 16);
- GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CFG_PCI0_MEM_BASE >> 16);
- GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CFG_PCI0_MEM_SIZE - 1) >> 16);
+ GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CONFIG_SYS_PCI0_MEM_BASE >> 16);
+ GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CONFIG_SYS_PCI0_MEM_BASE >> 16);
+ GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CONFIG_SYS_PCI0_MEM_SIZE - 1) >> 16);
- GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CFG_PCI1_IO_BASE >> 16);
- GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CFG_PCI1_IO_BASE >> 16);
- GT_REG_WRITE (PCI_1_IO_SIZE, (CFG_PCI1_IO_SIZE - 1) >> 16);
+ GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CONFIG_SYS_PCI1_IO_BASE >> 16);
+ GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CONFIG_SYS_PCI1_IO_BASE >> 16);
+ GT_REG_WRITE (PCI_1_IO_SIZE, (CONFIG_SYS_PCI1_IO_SIZE - 1) >> 16);
- GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CFG_PCI1_MEM_BASE >> 16);
- GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CFG_PCI1_MEM_BASE >> 16);
- GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CFG_PCI1_MEM_SIZE - 1) >> 16);
+ GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CONFIG_SYS_PCI1_MEM_BASE >> 16);
+ GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CONFIG_SYS_PCI1_MEM_BASE >> 16);
+ GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CONFIG_SYS_PCI1_MEM_SIZE - 1) >> 16);
/* PCI interface settings */
/* Timeout set to retry forever */
@@ -184,7 +184,7 @@
for (stat = 0; stat <= PCI_HOST1; stat++)
pciWriteConfigReg (stat,
PCI_INTERNAL_REGISTERS_MEMORY_MAPPED_BASE_ADDRESS,
- SELF, CFG_GT_REGS);
+ SELF, CONFIG_SYS_GT_REGS);
#endif
}
@@ -200,7 +200,7 @@
tmp = GTREGREAD (CPU_CONFIGURATION);
/* set the SINGLE_CPU bit see MV64360 P.399 */
-#ifndef CFG_GT_DUAL_CPU /* SINGLE_CPU seems to cause JTAG problems */
+#ifndef CONFIG_SYS_GT_DUAL_CPU /* SINGLE_CPU seems to cause JTAG problems */
tmp |= CPU_CONF_SINGLE_CPU;
#endif
@@ -251,7 +251,7 @@
* it last time. (huber)
*/
- my_remap_gt_regs (CFG_DFL_GT_REGS, CFG_GT_REGS);
+ my_remap_gt_regs (CONFIG_SYS_DFL_GT_REGS, CONFIG_SYS_GT_REGS);
/* No PCI in first release of Port To_do: enable it. */
#ifdef CONFIG_PCI
@@ -297,56 +297,56 @@
* on-board sram on the eval board, and updates the correct
* registers to boot from the sram. (device0)
*/
- if (memoryGetDeviceBaseAddress (DEVICE0) == CFG_DFL_BOOTCS_BASE)
+ if (memoryGetDeviceBaseAddress (DEVICE0) == CONFIG_SYS_DFL_BOOTCS_BASE)
sram_boot = 1;
if (!sram_boot)
- memoryMapDeviceSpace (DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE);
+ memoryMapDeviceSpace (DEVICE0, CONFIG_SYS_DEV0_SPACE, CONFIG_SYS_DEV0_SIZE);
- memoryMapDeviceSpace (DEVICE1, CFG_DEV1_SPACE, CFG_DEV1_SIZE);
- memoryMapDeviceSpace (DEVICE2, CFG_DEV2_SPACE, CFG_DEV2_SIZE);
- memoryMapDeviceSpace (DEVICE3, CFG_DEV3_SPACE, CFG_DEV3_SIZE);
+ memoryMapDeviceSpace (DEVICE1, CONFIG_SYS_DEV1_SPACE, CONFIG_SYS_DEV1_SIZE);
+ memoryMapDeviceSpace (DEVICE2, CONFIG_SYS_DEV2_SPACE, CONFIG_SYS_DEV2_SIZE);
+ memoryMapDeviceSpace (DEVICE3, CONFIG_SYS_DEV3_SPACE, CONFIG_SYS_DEV3_SIZE);
/* configure device timing */
-#ifdef CFG_DEV0_PAR /* set port parameters for SRAM device module access */
+#ifdef CONFIG_SYS_DEV0_PAR /* set port parameters for SRAM device module access */
if (!sram_boot)
- GT_REG_WRITE (DEVICE_BANK0PARAMETERS, CFG_DEV0_PAR);
+ GT_REG_WRITE (DEVICE_BANK0PARAMETERS, CONFIG_SYS_DEV0_PAR);
#endif
-#ifdef CFG_DEV1_PAR /* set port parameters for RTC device module access */
- GT_REG_WRITE (DEVICE_BANK1PARAMETERS, CFG_DEV1_PAR);
+#ifdef CONFIG_SYS_DEV1_PAR /* set port parameters for RTC device module access */
+ GT_REG_WRITE (DEVICE_BANK1PARAMETERS, CONFIG_SYS_DEV1_PAR);
#endif
-#ifdef CFG_DEV2_PAR /* set port parameters for DUART device module access */
- GT_REG_WRITE (DEVICE_BANK2PARAMETERS, CFG_DEV2_PAR);
+#ifdef CONFIG_SYS_DEV2_PAR /* set port parameters for DUART device module access */
+ GT_REG_WRITE (DEVICE_BANK2PARAMETERS, CONFIG_SYS_DEV2_PAR);
#endif
-#ifdef CFG_32BIT_BOOT_PAR /* set port parameters for Flash device module access */
+#ifdef CONFIG_SYS_32BIT_BOOT_PAR /* set port parameters for Flash device module access */
/* detect if we are booting from the 32 bit flash */
if (GTREGREAD (DEVICE_BOOT_BANK_PARAMETERS) & (0x3 << 20)) {
/* 32 bit boot flash */
- GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_8BIT_BOOT_PAR);
+ GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);
GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS,
- CFG_32BIT_BOOT_PAR);
+ CONFIG_SYS_32BIT_BOOT_PAR);
} else {
/* 8 bit boot flash */
- GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_32BIT_BOOT_PAR);
- GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);
+ GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CONFIG_SYS_32BIT_BOOT_PAR);
+ GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);
}
#else
/* 8 bit boot flash only */
-/* GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);*/
+/* GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);*/
#endif
gt_cpu_config ();
/* MPP setup */
- GT_REG_WRITE (MPP_CONTROL0, CFG_MPP_CONTROL_0);
- GT_REG_WRITE (MPP_CONTROL1, CFG_MPP_CONTROL_1);
- GT_REG_WRITE (MPP_CONTROL2, CFG_MPP_CONTROL_2);
- GT_REG_WRITE (MPP_CONTROL3, CFG_MPP_CONTROL_3);
+ GT_REG_WRITE (MPP_CONTROL0, CONFIG_SYS_MPP_CONTROL_0);
+ GT_REG_WRITE (MPP_CONTROL1, CONFIG_SYS_MPP_CONTROL_1);
+ GT_REG_WRITE (MPP_CONTROL2, CONFIG_SYS_MPP_CONTROL_2);
+ GT_REG_WRITE (MPP_CONTROL3, CONFIG_SYS_MPP_CONTROL_3);
- GT_REG_WRITE (GPP_LEVEL_CONTROL, CFG_GPP_LEVEL_CONTROL);
+ GT_REG_WRITE (GPP_LEVEL_CONTROL, CONFIG_SYS_GPP_LEVEL_CONTROL);
DEBUG_LED0_ON ();
DEBUG_LED1_ON ();
DEBUG_LED2_ON ();
@@ -359,7 +359,7 @@
int misc_init_r ()
{
icache_enable ();
-#ifdef CFG_L2
+#ifdef CONFIG_SYS_L2
l2cache_enable ();
#endif
#ifdef CONFIG_MPSC
@@ -380,9 +380,9 @@
/* check to see if we booted from the sram. If so, move things
* back to the way they should be. (we're running from main
* memory at this point now */
- if (memoryGetDeviceBaseAddress (DEVICE0) == CFG_DFL_BOOTCS_BASE) {
- memoryMapDeviceSpace (DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE);
- memoryMapDeviceSpace (BOOT_DEVICE, CFG_DFL_BOOTCS_BASE, _8M);
+ if (memoryGetDeviceBaseAddress (DEVICE0) == CONFIG_SYS_DFL_BOOTCS_BASE) {
+ memoryMapDeviceSpace (DEVICE0, CONFIG_SYS_DEV0_SPACE, CONFIG_SYS_DEV0_SIZE);
+ memoryMapDeviceSpace (BOOT_DEVICE, CONFIG_SYS_DFL_BOOTCS_BASE, _8M);
}
display_mem_map ();
/* now, jump to the main ppcboot board init code */
@@ -402,7 +402,7 @@
{
int l_type = 0;
- printf ("BOARD: %s\n", CFG_BOARD_NAME);
+ printf ("BOARD: %s\n", CONFIG_SYS_BOARD_NAME);
return (l_type);
}
@@ -415,34 +415,34 @@
if (mode == 1) {
switch (led) {
case 0:
- addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+ addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
0x08000);
break;
case 1:
- addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+ addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
0x0c000);
break;
case 2:
- addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+ addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
0x10000);
break;
}
} else if (mode == 0) {
switch (led) {
case 0:
- addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+ addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
0x14000);
break;
case 1:
- addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+ addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
0x18000);
break;
case 2:
- addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+ addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
0x1c000);
break;
}
@@ -513,7 +513,7 @@
/* DRAM check routines copied from gw8260 */
-#if defined (CFG_DRAM_TEST)
+#if defined (CONFIG_SYS_DRAM_TEST)
/*********************************************************************/
/* NAME: move64() - moves a double word (64-bit) */
@@ -544,7 +544,7 @@
}
-#if defined (CFG_DRAM_TEST_DATA)
+#if defined (CONFIG_SYS_DRAM_TEST_DATA)
unsigned long long pattern[] = {
0xaaaaaaaaaaaaaaaaULL,
@@ -607,7 +607,7 @@
/*********************************************************************/
int mem_test_data (void)
{
- unsigned long long *pmem = (unsigned long long *) CFG_MEMTEST_START;
+ unsigned long long *pmem = (unsigned long long *) CONFIG_SYS_MEMTEST_START;
unsigned long long temp64 = 0;
int num_patterns = sizeof (pattern) / sizeof (pattern[0]);
int i;
@@ -634,9 +634,9 @@
return 0;
}
-#endif /* CFG_DRAM_TEST_DATA */
+#endif /* CONFIG_SYS_DRAM_TEST_DATA */
-#if defined (CFG_DRAM_TEST_ADDRESS)
+#if defined (CONFIG_SYS_DRAM_TEST_ADDRESS)
/*********************************************************************/
/* NAME: mem_test_address() - test address lines */
/* */
@@ -661,8 +661,8 @@
int mem_test_address (void)
{
volatile unsigned int *pmem =
- (volatile unsigned int *) CFG_MEMTEST_START;
- const unsigned int size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 4;
+ (volatile unsigned int *) CONFIG_SYS_MEMTEST_START;
+ const unsigned int size = (CONFIG_SYS_MEMTEST_END - CONFIG_SYS_MEMTEST_START) / 4;
unsigned int i;
/* write address to each location */
@@ -679,9 +679,9 @@
}
return 0;
}
-#endif /* CFG_DRAM_TEST_ADDRESS */
+#endif /* CONFIG_SYS_DRAM_TEST_ADDRESS */
-#if defined (CFG_DRAM_TEST_WALK)
+#if defined (CONFIG_SYS_DRAM_TEST_WALK)
/*********************************************************************/
/* NAME: mem_march() - memory march */
/* */
@@ -739,7 +739,7 @@
}
return 0;
}
-#endif /* CFG_DRAM_TEST_WALK */
+#endif /* CONFIG_SYS_DRAM_TEST_WALK */
/*********************************************************************/
/* NAME: mem_test_walk() - a simple walking ones test */
@@ -771,8 +771,8 @@
{
unsigned long long mask;
volatile unsigned long long *pmem =
- (volatile unsigned long long *) CFG_MEMTEST_START;
- const unsigned long size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 8;
+ (volatile unsigned long long *) CONFIG_SYS_MEMTEST_START;
+ const unsigned long size = (CONFIG_SYS_MEMTEST_END - CONFIG_SYS_MEMTEST_START) / 8;
unsigned int i;
@@ -848,9 +848,9 @@
/* runwalk = 0; */
if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
- printf ("Testing RAM from 0x%08x to 0x%08x ... (don't panic... that will take a moment !!!!)\n", CFG_MEMTEST_START, CFG_MEMTEST_END);
+ printf ("Testing RAM from 0x%08x to 0x%08x ... (don't panic... that will take a moment !!!!)\n", CONFIG_SYS_MEMTEST_START, CONFIG_SYS_MEMTEST_END);
}
-#ifdef CFG_DRAM_TEST_DATA
+#ifdef CONFIG_SYS_DRAM_TEST_DATA
if (rundata == 1) {
printf ("Test DATA ... ");
if (mem_test_data () == 1) {
@@ -860,7 +860,7 @@
printf ("ok \n");
}
#endif
-#ifdef CFG_DRAM_TEST_ADDRESS
+#ifdef CONFIG_SYS_DRAM_TEST_ADDRESS
if (runaddress == 1) {
printf ("Test ADDRESS ... ");
if (mem_test_address () == 1) {
@@ -870,7 +870,7 @@
printf ("ok \n");
}
#endif
-#ifdef CFG_DRAM_TEST_WALK
+#ifdef CONFIG_SYS_DRAM_TEST_WALK
if (runwalk == 1) {
printf ("Test WALKING ONEs ... ");
if (mem_test_walk () == 1) {
@@ -886,7 +886,7 @@
return 0;
}
-#endif /* CFG_DRAM_TEST */
+#endif /* CONFIG_SYS_DRAM_TEST */
/* ronen - the below functions are used by the bootm function */
/* - we map the base register to fbe00000 (same mapping as in the LSP) */
@@ -925,7 +925,7 @@
/* MV_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG(2), 0x0000ff00); */
/* Relocate MV64360 internal regs */
- my_remap_gt_regs_bootm (CFG_GT_REGS, BRIDGE_REG_BASE_BOOTM);
+ my_remap_gt_regs_bootm (CONFIG_SYS_GT_REGS, BRIDGE_REG_BASE_BOOTM);
icache_disable ();
dcache_disable ();
diff --git a/board/Marvell/db64360/mpsc.c b/board/Marvell/db64360/mpsc.c
index 923d955..7ad6ae8 100644
--- a/board/Marvell/db64360/mpsc.c
+++ b/board/Marvell/db64360/mpsc.c
@@ -426,7 +426,7 @@
(MV64360_CUNIT_BASE_ADDR_WIN_0_BIT * 2)));
/* Setup MPSC internal address space base address */
- GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CFG_GT_REGS);
+ GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CONFIG_SYS_GT_REGS);
/* no high address remap*/
GT_REG_WRITE (CUNIT_HIGH_ADDR_REMAP_REG0, 0x00);
@@ -516,9 +516,9 @@
#ifdef ZUMA_NTL
/* from tclk */
- clock = (CFG_TCLK / (16 * rate)) - 1;
+ clock = (CONFIG_SYS_TCLK / (16 * rate)) - 1;
#else
- clock = (CFG_TCLK / (16 * rate)) - 1;
+ clock = (CONFIG_SYS_TCLK / (16 * rate)) - 1;
#endif
galbrg_set_CDV (channel, clock); /* set timer Reg. for BRG */
diff --git a/board/Marvell/db64360/pci.c b/board/Marvell/db64360/pci.c
index 5637284..a7e3c95 100644
--- a/board/Marvell/db64360/pci.c
+++ b/board/Marvell/db64360/pci.c
@@ -859,14 +859,14 @@
/* PCI memory space */
pci_set_region (pci0_hose.regions + 0,
- CFG_PCI0_0_MEM_SPACE,
- CFG_PCI0_0_MEM_SPACE,
- CFG_PCI0_MEM_SIZE, PCI_REGION_MEM);
+ CONFIG_SYS_PCI0_0_MEM_SPACE,
+ CONFIG_SYS_PCI0_0_MEM_SPACE,
+ CONFIG_SYS_PCI0_MEM_SIZE, PCI_REGION_MEM);
/* PCI I/O space */
pci_set_region (pci0_hose.regions + 1,
- CFG_PCI0_IO_SPACE_PCI,
- CFG_PCI0_IO_SPACE, CFG_PCI0_IO_SIZE, PCI_REGION_IO);
+ CONFIG_SYS_PCI0_IO_SPACE_PCI,
+ CONFIG_SYS_PCI0_IO_SPACE, CONFIG_SYS_PCI0_IO_SIZE, PCI_REGION_IO);
pci_set_ops (&pci0_hose,
pci_hose_read_config_byte_via_dword,
@@ -901,14 +901,14 @@
/* PCI memory space */
pci_set_region (pci1_hose.regions + 0,
- CFG_PCI1_0_MEM_SPACE,
- CFG_PCI1_0_MEM_SPACE,
- CFG_PCI1_MEM_SIZE, PCI_REGION_MEM);
+ CONFIG_SYS_PCI1_0_MEM_SPACE,
+ CONFIG_SYS_PCI1_0_MEM_SPACE,
+ CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM);
/* PCI I/O space */
pci_set_region (pci1_hose.regions + 1,
- CFG_PCI1_IO_SPACE_PCI,
- CFG_PCI1_IO_SPACE, CFG_PCI1_IO_SIZE, PCI_REGION_IO);
+ CONFIG_SYS_PCI1_IO_SPACE_PCI,
+ CONFIG_SYS_PCI1_IO_SPACE, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO);
pci_set_ops (&pci1_hose,
pci_hose_read_config_byte_via_dword,
diff --git a/board/Marvell/db64360/sdram_init.c b/board/Marvell/db64360/sdram_init.c
index ecadaf2..d0817d7 100644
--- a/board/Marvell/db64360/sdram_init.c
+++ b/board/Marvell/db64360/sdram_init.c
@@ -312,7 +312,7 @@
} else
dimmInfo->slot = slot; /* start to fill up dimminfo for this "slot" */
-#ifdef CFG_DISPLAY_DIMM_SPD_CONTENT
+#ifdef CONFIG_SYS_DISPLAY_DIMM_SPD_CONTENT
for (i = 0; i <= 127; i++) {
printf ("SPD-EEPROM Byte %3d = %3x (%3d)\n", i, data[i],
@@ -690,16 +690,16 @@
if ((dimmInfo->
minimumCycleTimeAtMaxCasLatancy_LoP
<
- CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+ CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
||
((dimmInfo->
minimumCycleTimeAtMaxCasLatancy_LoP
==
- CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+ CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
&& (dimmInfo->
minimumCycleTimeAtMaxCasLatancy_RoP
<
- CFG_DDR_SDRAM_CYCLE_COUNT_ROP)))
+ CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_ROP)))
{
dimmInfo->
maxClSupported_DDR
@@ -714,16 +714,16 @@
if ((dimmInfo->
minimumCycleTimeAtMaxCasLatancy_LoP
>
- CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+ CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
||
((dimmInfo->
minimumCycleTimeAtMaxCasLatancy_LoP
==
- CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+ CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
&& (dimmInfo->
minimumCycleTimeAtMaxCasLatancy_RoP
>
- CFG_DDR_SDRAM_CYCLE_COUNT_ROP)))
+ CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_ROP)))
{
printf ("*********************************************************\n");
printf ("*** sysClock is higher than SDRAM's allowed frequency ***\n");
@@ -1290,37 +1290,37 @@
case 0x0:
case 0x80: /* refresh period is 15.625 usec */
sdram_config_reg =
- (unsigned int) (((float) 15.625 * (float) CFG_BUS_HZ)
+ (unsigned int) (((float) 15.625 * (float) CONFIG_SYS_BUS_HZ)
/ (float) 1000000.0);
break;
case 0x1:
case 0x81: /* refresh period is 3.9 usec */
sdram_config_reg =
- (unsigned int) (((float) 3.9 * (float) CFG_BUS_HZ) /
+ (unsigned int) (((float) 3.9 * (float) CONFIG_SYS_BUS_HZ) /
(float) 1000000.0);
break;
case 0x2:
case 0x82: /* refresh period is 7.8 usec */
sdram_config_reg =
- (unsigned int) (((float) 7.8 * (float) CFG_BUS_HZ) /
+ (unsigned int) (((float) 7.8 * (float) CONFIG_SYS_BUS_HZ) /
(float) 1000000.0);
break;
case 0x3:
case 0x83: /* refresh period is 31.3 usec */
sdram_config_reg =
- (unsigned int) (((float) 31.3 * (float) CFG_BUS_HZ) /
+ (unsigned int) (((float) 31.3 * (float) CONFIG_SYS_BUS_HZ) /
(float) 1000000.0);
break;
case 0x4:
case 0x84: /* refresh period is 62.5 usec */
sdram_config_reg =
- (unsigned int) (((float) 62.5 * (float) CFG_BUS_HZ) /
+ (unsigned int) (((float) 62.5 * (float) CONFIG_SYS_BUS_HZ) /
(float) 1000000.0);
break;
case 0x5:
case 0x85: /* refresh period is 125 usec */
sdram_config_reg =
- (unsigned int) (((float) 125 * (float) CFG_BUS_HZ) /
+ (unsigned int) (((float) 125 * (float) CONFIG_SYS_BUS_HZ) /
(float) 1000000.0);
break;
default: /* refresh period undefined */
@@ -1807,7 +1807,7 @@
printf ("-- DIMM2 has %d banks\n", dimmInfo2.numOfModuleBanks);
- for (bank_no = 0; bank_no < CFG_DRAM_BANKS; bank_no++) {
+ for (bank_no = 0; bank_no < CONFIG_SYS_DRAM_BANKS; bank_no++) {
/* skip over banks that are not populated */
if (!checkbank[bank_no])
continue;
diff --git a/board/Marvell/db64460/db64460.c b/board/Marvell/db64460/db64460.c
index 8a05cd2..14e6355 100644
--- a/board/Marvell/db64460/db64460.c
+++ b/board/Marvell/db64460/db64460.c
@@ -55,7 +55,7 @@
/* ------------------------------------------------------------------------- */
/* this is the current GT register space location */
-/* it starts at CFG_DFL_GT_REGS but moves later to CFG_GT_REGS */
+/* it starts at CONFIG_SYS_DFL_GT_REGS but moves later to CONFIG_SYS_GT_REGS */
/* Unfortunately, we cant change it while we are in flash, so we initialize it
* to the "final" value. This means that any debug_led calls before
@@ -64,7 +64,7 @@
*/
void board_prebootm_init (void);
-unsigned int INTERNAL_REG_BASE_ADDR = CFG_GT_REGS;
+unsigned int INTERNAL_REG_BASE_ADDR = CONFIG_SYS_GT_REGS;
int display_mem_map (void);
/* ------------------------------------------------------------------------- */
@@ -127,7 +127,7 @@
GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val);
GT_REG_WRITE (PCI_0_CONFIG_DATA_VIRTUAL_REG,
- (stat & 0xffff0000) | CFG_PCI_IDSEL);
+ (stat & 0xffff0000) | CONFIG_SYS_PCI_IDSEL);
}
if ((GTREGREAD (PCI_1_MODE) & (BIT4 | BIT5)) != 0) { /*if PCI-X */
@@ -136,7 +136,7 @@
GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val);
GT_REG_WRITE (PCI_1_CONFIG_DATA_VIRTUAL_REG,
- (stat & 0xffff0000) | CFG_PCI_IDSEL);
+ (stat & 0xffff0000) | CONFIG_SYS_PCI_IDSEL);
}
/* Enable master */
@@ -154,21 +154,21 @@
/* ronen- add write to pci remap registers for 64460.
in 64360 when writing to pci base go and overide remap automaticaly,
in 64460 it doesn't */
- GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CFG_PCI0_IO_BASE >> 16);
- GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CFG_PCI0_IO_BASE >> 16);
- GT_REG_WRITE (PCI_0_IO_SIZE, (CFG_PCI0_IO_SIZE - 1) >> 16);
+ GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CONFIG_SYS_PCI0_IO_BASE >> 16);
+ GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CONFIG_SYS_PCI0_IO_BASE >> 16);
+ GT_REG_WRITE (PCI_0_IO_SIZE, (CONFIG_SYS_PCI0_IO_SIZE - 1) >> 16);
- GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CFG_PCI0_MEM_BASE >> 16);
- GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CFG_PCI0_MEM_BASE >> 16);
- GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CFG_PCI0_MEM_SIZE - 1) >> 16);
+ GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CONFIG_SYS_PCI0_MEM_BASE >> 16);
+ GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CONFIG_SYS_PCI0_MEM_BASE >> 16);
+ GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CONFIG_SYS_PCI0_MEM_SIZE - 1) >> 16);
- GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CFG_PCI1_IO_BASE >> 16);
- GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CFG_PCI1_IO_BASE >> 16);
- GT_REG_WRITE (PCI_1_IO_SIZE, (CFG_PCI1_IO_SIZE - 1) >> 16);
+ GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CONFIG_SYS_PCI1_IO_BASE >> 16);
+ GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CONFIG_SYS_PCI1_IO_BASE >> 16);
+ GT_REG_WRITE (PCI_1_IO_SIZE, (CONFIG_SYS_PCI1_IO_SIZE - 1) >> 16);
- GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CFG_PCI1_MEM_BASE >> 16);
- GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CFG_PCI1_MEM_BASE >> 16);
- GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CFG_PCI1_MEM_SIZE - 1) >> 16);
+ GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CONFIG_SYS_PCI1_MEM_BASE >> 16);
+ GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CONFIG_SYS_PCI1_MEM_BASE >> 16);
+ GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CONFIG_SYS_PCI1_MEM_SIZE - 1) >> 16);
/* PCI interface settings */
/* Timeout set to retry forever */
@@ -184,7 +184,7 @@
for (stat = 0; stat <= PCI_HOST1; stat++)
pciWriteConfigReg (stat,
PCI_INTERNAL_REGISTERS_MEMORY_MAPPED_BASE_ADDRESS,
- SELF, CFG_GT_REGS);
+ SELF, CONFIG_SYS_GT_REGS);
#endif
}
@@ -200,7 +200,7 @@
tmp = GTREGREAD (CPU_CONFIGURATION);
/* set the SINGLE_CPU bit see MV64460 P.399 */
-#ifndef CFG_GT_DUAL_CPU /* SINGLE_CPU seems to cause JTAG problems */
+#ifndef CONFIG_SYS_GT_DUAL_CPU /* SINGLE_CPU seems to cause JTAG problems */
tmp |= CPU_CONF_SINGLE_CPU;
#endif
@@ -251,7 +251,7 @@
* it last time. (huber)
*/
- my_remap_gt_regs (CFG_DFL_GT_REGS, CFG_GT_REGS);
+ my_remap_gt_regs (CONFIG_SYS_DFL_GT_REGS, CONFIG_SYS_GT_REGS);
/* No PCI in first release of Port To_do: enable it. */
#ifdef CONFIG_PCI
@@ -297,56 +297,56 @@
* on-board sram on the eval board, and updates the correct
* registers to boot from the sram. (device0)
*/
- if (memoryGetDeviceBaseAddress (DEVICE0) == CFG_DFL_BOOTCS_BASE)
+ if (memoryGetDeviceBaseAddress (DEVICE0) == CONFIG_SYS_DFL_BOOTCS_BASE)
sram_boot = 1;
if (!sram_boot)
- memoryMapDeviceSpace (DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE);
+ memoryMapDeviceSpace (DEVICE0, CONFIG_SYS_DEV0_SPACE, CONFIG_SYS_DEV0_SIZE);
- memoryMapDeviceSpace (DEVICE1, CFG_DEV1_SPACE, CFG_DEV1_SIZE);
- memoryMapDeviceSpace (DEVICE2, CFG_DEV2_SPACE, CFG_DEV2_SIZE);
- memoryMapDeviceSpace (DEVICE3, CFG_DEV3_SPACE, CFG_DEV3_SIZE);
+ memoryMapDeviceSpace (DEVICE1, CONFIG_SYS_DEV1_SPACE, CONFIG_SYS_DEV1_SIZE);
+ memoryMapDeviceSpace (DEVICE2, CONFIG_SYS_DEV2_SPACE, CONFIG_SYS_DEV2_SIZE);
+ memoryMapDeviceSpace (DEVICE3, CONFIG_SYS_DEV3_SPACE, CONFIG_SYS_DEV3_SIZE);
/* configure device timing */
-#ifdef CFG_DEV0_PAR /* set port parameters for SRAM device module access */
+#ifdef CONFIG_SYS_DEV0_PAR /* set port parameters for SRAM device module access */
if (!sram_boot)
- GT_REG_WRITE (DEVICE_BANK0PARAMETERS, CFG_DEV0_PAR);
+ GT_REG_WRITE (DEVICE_BANK0PARAMETERS, CONFIG_SYS_DEV0_PAR);
#endif
-#ifdef CFG_DEV1_PAR /* set port parameters for RTC device module access */
- GT_REG_WRITE (DEVICE_BANK1PARAMETERS, CFG_DEV1_PAR);
+#ifdef CONFIG_SYS_DEV1_PAR /* set port parameters for RTC device module access */
+ GT_REG_WRITE (DEVICE_BANK1PARAMETERS, CONFIG_SYS_DEV1_PAR);
#endif
-#ifdef CFG_DEV2_PAR /* set port parameters for DUART device module access */
- GT_REG_WRITE (DEVICE_BANK2PARAMETERS, CFG_DEV2_PAR);
+#ifdef CONFIG_SYS_DEV2_PAR /* set port parameters for DUART device module access */
+ GT_REG_WRITE (DEVICE_BANK2PARAMETERS, CONFIG_SYS_DEV2_PAR);
#endif
-#ifdef CFG_32BIT_BOOT_PAR /* set port parameters for Flash device module access */
+#ifdef CONFIG_SYS_32BIT_BOOT_PAR /* set port parameters for Flash device module access */
/* detect if we are booting from the 32 bit flash */
if (GTREGREAD (DEVICE_BOOT_BANK_PARAMETERS) & (0x3 << 20)) {
/* 32 bit boot flash */
- GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_8BIT_BOOT_PAR);
+ GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);
GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS,
- CFG_32BIT_BOOT_PAR);
+ CONFIG_SYS_32BIT_BOOT_PAR);
} else {
/* 8 bit boot flash */
- GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_32BIT_BOOT_PAR);
- GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);
+ GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CONFIG_SYS_32BIT_BOOT_PAR);
+ GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);
}
#else
/* 8 bit boot flash only */
-/* GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);*/
+/* GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);*/
#endif
gt_cpu_config ();
/* MPP setup */
- GT_REG_WRITE (MPP_CONTROL0, CFG_MPP_CONTROL_0);
- GT_REG_WRITE (MPP_CONTROL1, CFG_MPP_CONTROL_1);
- GT_REG_WRITE (MPP_CONTROL2, CFG_MPP_CONTROL_2);
- GT_REG_WRITE (MPP_CONTROL3, CFG_MPP_CONTROL_3);
+ GT_REG_WRITE (MPP_CONTROL0, CONFIG_SYS_MPP_CONTROL_0);
+ GT_REG_WRITE (MPP_CONTROL1, CONFIG_SYS_MPP_CONTROL_1);
+ GT_REG_WRITE (MPP_CONTROL2, CONFIG_SYS_MPP_CONTROL_2);
+ GT_REG_WRITE (MPP_CONTROL3, CONFIG_SYS_MPP_CONTROL_3);
- GT_REG_WRITE (GPP_LEVEL_CONTROL, CFG_GPP_LEVEL_CONTROL);
+ GT_REG_WRITE (GPP_LEVEL_CONTROL, CONFIG_SYS_GPP_LEVEL_CONTROL);
DEBUG_LED0_ON ();
DEBUG_LED1_ON ();
DEBUG_LED2_ON ();
@@ -359,7 +359,7 @@
int misc_init_r ()
{
icache_enable ();
-#ifdef CFG_L2
+#ifdef CONFIG_SYS_L2
l2cache_enable ();
#endif
#ifdef CONFIG_MPSC
@@ -380,9 +380,9 @@
/* check to see if we booted from the sram. If so, move things
* back to the way they should be. (we're running from main
* memory at this point now */
- if (memoryGetDeviceBaseAddress (DEVICE0) == CFG_DFL_BOOTCS_BASE) {
- memoryMapDeviceSpace (DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE);
- memoryMapDeviceSpace (BOOT_DEVICE, CFG_DFL_BOOTCS_BASE, _8M);
+ if (memoryGetDeviceBaseAddress (DEVICE0) == CONFIG_SYS_DFL_BOOTCS_BASE) {
+ memoryMapDeviceSpace (DEVICE0, CONFIG_SYS_DEV0_SPACE, CONFIG_SYS_DEV0_SIZE);
+ memoryMapDeviceSpace (BOOT_DEVICE, CONFIG_SYS_DFL_BOOTCS_BASE, _8M);
}
display_mem_map ();
/* now, jump to the main ppcboot board init code */
@@ -402,7 +402,7 @@
{
int l_type = 0;
- printf ("BOARD: %s\n", CFG_BOARD_NAME);
+ printf ("BOARD: %s\n", CONFIG_SYS_BOARD_NAME);
return (l_type);
}
@@ -415,34 +415,34 @@
if (mode == 1) {
switch (led) {
case 0:
- addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+ addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
0x08000);
break;
case 1:
- addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+ addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
0x0c000);
break;
case 2:
- addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+ addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
0x10000);
break;
}
} else if (mode == 0) {
switch (led) {
case 0:
- addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+ addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
0x14000);
break;
case 1:
- addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+ addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
0x18000);
break;
case 2:
- addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+ addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
0x1c000);
break;
}
@@ -513,7 +513,7 @@
/* DRAM check routines copied from gw8260 */
-#if defined (CFG_DRAM_TEST)
+#if defined (CONFIG_SYS_DRAM_TEST)
/*********************************************************************/
/* NAME: move64() - moves a double word (64-bit) */
@@ -544,7 +544,7 @@
}
-#if defined (CFG_DRAM_TEST_DATA)
+#if defined (CONFIG_SYS_DRAM_TEST_DATA)
unsigned long long pattern[] = {
0xaaaaaaaaaaaaaaaaULL,
@@ -607,7 +607,7 @@
/*********************************************************************/
int mem_test_data (void)
{
- unsigned long long *pmem = (unsigned long long *) CFG_MEMTEST_START;
+ unsigned long long *pmem = (unsigned long long *) CONFIG_SYS_MEMTEST_START;
unsigned long long temp64 = 0;
int num_patterns = sizeof (pattern) / sizeof (pattern[0]);
int i;
@@ -634,9 +634,9 @@
return 0;
}
-#endif /* CFG_DRAM_TEST_DATA */
+#endif /* CONFIG_SYS_DRAM_TEST_DATA */
-#if defined (CFG_DRAM_TEST_ADDRESS)
+#if defined (CONFIG_SYS_DRAM_TEST_ADDRESS)
/*********************************************************************/
/* NAME: mem_test_address() - test address lines */
/* */
@@ -661,8 +661,8 @@
int mem_test_address (void)
{
volatile unsigned int *pmem =
- (volatile unsigned int *) CFG_MEMTEST_START;
- const unsigned int size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 4;
+ (volatile unsigned int *) CONFIG_SYS_MEMTEST_START;
+ const unsigned int size = (CONFIG_SYS_MEMTEST_END - CONFIG_SYS_MEMTEST_START) / 4;
unsigned int i;
/* write address to each location */
@@ -679,9 +679,9 @@
}
return 0;
}
-#endif /* CFG_DRAM_TEST_ADDRESS */
+#endif /* CONFIG_SYS_DRAM_TEST_ADDRESS */
-#if defined (CFG_DRAM_TEST_WALK)
+#if defined (CONFIG_SYS_DRAM_TEST_WALK)
/*********************************************************************/
/* NAME: mem_march() - memory march */
/* */
@@ -739,7 +739,7 @@
}
return 0;
}
-#endif /* CFG_DRAM_TEST_WALK */
+#endif /* CONFIG_SYS_DRAM_TEST_WALK */
/*********************************************************************/
/* NAME: mem_test_walk() - a simple walking ones test */
@@ -771,8 +771,8 @@
{
unsigned long long mask;
volatile unsigned long long *pmem =
- (volatile unsigned long long *) CFG_MEMTEST_START;
- const unsigned long size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 8;
+ (volatile unsigned long long *) CONFIG_SYS_MEMTEST_START;
+ const unsigned long size = (CONFIG_SYS_MEMTEST_END - CONFIG_SYS_MEMTEST_START) / 8;
unsigned int i;
@@ -848,9 +848,9 @@
/* runwalk = 0; */
if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
- printf ("Testing RAM from 0x%08x to 0x%08x ... (don't panic... that will take a moment !!!!)\n", CFG_MEMTEST_START, CFG_MEMTEST_END);
+ printf ("Testing RAM from 0x%08x to 0x%08x ... (don't panic... that will take a moment !!!!)\n", CONFIG_SYS_MEMTEST_START, CONFIG_SYS_MEMTEST_END);
}
-#ifdef CFG_DRAM_TEST_DATA
+#ifdef CONFIG_SYS_DRAM_TEST_DATA
if (rundata == 1) {
printf ("Test DATA ... ");
if (mem_test_data () == 1) {
@@ -860,7 +860,7 @@
printf ("ok \n");
}
#endif
-#ifdef CFG_DRAM_TEST_ADDRESS
+#ifdef CONFIG_SYS_DRAM_TEST_ADDRESS
if (runaddress == 1) {
printf ("Test ADDRESS ... ");
if (mem_test_address () == 1) {
@@ -870,7 +870,7 @@
printf ("ok \n");
}
#endif
-#ifdef CFG_DRAM_TEST_WALK
+#ifdef CONFIG_SYS_DRAM_TEST_WALK
if (runwalk == 1) {
printf ("Test WALKING ONEs ... ");
if (mem_test_walk () == 1) {
@@ -886,7 +886,7 @@
return 0;
}
-#endif /* CFG_DRAM_TEST */
+#endif /* CONFIG_SYS_DRAM_TEST */
/* ronen - the below functions are used by the bootm function */
/* - we map the base register to fbe00000 (same mapping as in the LSP) */
@@ -925,7 +925,7 @@
GT_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (2), 0x0000ff00);
/* Relocate MV64460 internal regs */
- my_remap_gt_regs_bootm (CFG_GT_REGS, BRIDGE_REG_BASE_BOOTM);
+ my_remap_gt_regs_bootm (CONFIG_SYS_GT_REGS, BRIDGE_REG_BASE_BOOTM);
icache_disable ();
dcache_disable ();
diff --git a/board/Marvell/db64460/mpsc.c b/board/Marvell/db64460/mpsc.c
index 359b831..303a636 100644
--- a/board/Marvell/db64460/mpsc.c
+++ b/board/Marvell/db64460/mpsc.c
@@ -426,7 +426,7 @@
(MV64460_CUNIT_BASE_ADDR_WIN_0_BIT * 2)));
/* Setup MPSC internal address space base address */
- GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CFG_GT_REGS);
+ GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CONFIG_SYS_GT_REGS);
/* no high address remap*/
GT_REG_WRITE (CUNIT_HIGH_ADDR_REMAP_REG0, 0x00);
@@ -516,9 +516,9 @@
#ifdef ZUMA_NTL
/* from tclk */
- clock = (CFG_TCLK / (16 * rate)) - 1;
+ clock = (CONFIG_SYS_TCLK / (16 * rate)) - 1;
#else
- clock = (CFG_TCLK / (16 * rate)) - 1;
+ clock = (CONFIG_SYS_TCLK / (16 * rate)) - 1;
#endif
galbrg_set_CDV (channel, clock); /* set timer Reg. for BRG */
diff --git a/board/Marvell/db64460/pci.c b/board/Marvell/db64460/pci.c
index 5637284..a7e3c95 100644
--- a/board/Marvell/db64460/pci.c
+++ b/board/Marvell/db64460/pci.c
@@ -859,14 +859,14 @@
/* PCI memory space */
pci_set_region (pci0_hose.regions + 0,
- CFG_PCI0_0_MEM_SPACE,
- CFG_PCI0_0_MEM_SPACE,
- CFG_PCI0_MEM_SIZE, PCI_REGION_MEM);
+ CONFIG_SYS_PCI0_0_MEM_SPACE,
+ CONFIG_SYS_PCI0_0_MEM_SPACE,
+ CONFIG_SYS_PCI0_MEM_SIZE, PCI_REGION_MEM);
/* PCI I/O space */
pci_set_region (pci0_hose.regions + 1,
- CFG_PCI0_IO_SPACE_PCI,
- CFG_PCI0_IO_SPACE, CFG_PCI0_IO_SIZE, PCI_REGION_IO);
+ CONFIG_SYS_PCI0_IO_SPACE_PCI,
+ CONFIG_SYS_PCI0_IO_SPACE, CONFIG_SYS_PCI0_IO_SIZE, PCI_REGION_IO);
pci_set_ops (&pci0_hose,
pci_hose_read_config_byte_via_dword,
@@ -901,14 +901,14 @@
/* PCI memory space */
pci_set_region (pci1_hose.regions + 0,
- CFG_PCI1_0_MEM_SPACE,
- CFG_PCI1_0_MEM_SPACE,
- CFG_PCI1_MEM_SIZE, PCI_REGION_MEM);
+ CONFIG_SYS_PCI1_0_MEM_SPACE,
+ CONFIG_SYS_PCI1_0_MEM_SPACE,
+ CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM);
/* PCI I/O space */
pci_set_region (pci1_hose.regions + 1,
- CFG_PCI1_IO_SPACE_PCI,
- CFG_PCI1_IO_SPACE, CFG_PCI1_IO_SIZE, PCI_REGION_IO);
+ CONFIG_SYS_PCI1_IO_SPACE_PCI,
+ CONFIG_SYS_PCI1_IO_SPACE, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO);
pci_set_ops (&pci1_hose,
pci_hose_read_config_byte_via_dword,
diff --git a/board/Marvell/db64460/sdram_init.c b/board/Marvell/db64460/sdram_init.c
index f36f348..6d6b126 100644
--- a/board/Marvell/db64460/sdram_init.c
+++ b/board/Marvell/db64460/sdram_init.c
@@ -312,7 +312,7 @@
} else
dimmInfo->slot = slot; /* start to fill up dimminfo for this "slot" */
-#ifdef CFG_DISPLAY_DIMM_SPD_CONTENT
+#ifdef CONFIG_SYS_DISPLAY_DIMM_SPD_CONTENT
for (i = 0; i <= 127; i++) {
printf ("SPD-EEPROM Byte %3d = %3x (%3d)\n", i, data[i],
@@ -690,16 +690,16 @@
if ((dimmInfo->
minimumCycleTimeAtMaxCasLatancy_LoP
<
- CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+ CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
||
((dimmInfo->
minimumCycleTimeAtMaxCasLatancy_LoP
==
- CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+ CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
&& (dimmInfo->
minimumCycleTimeAtMaxCasLatancy_RoP
<
- CFG_DDR_SDRAM_CYCLE_COUNT_ROP)))
+ CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_ROP)))
{
dimmInfo->
maxClSupported_DDR
@@ -714,16 +714,16 @@
if ((dimmInfo->
minimumCycleTimeAtMaxCasLatancy_LoP
>
- CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+ CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
||
((dimmInfo->
minimumCycleTimeAtMaxCasLatancy_LoP
==
- CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+ CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
&& (dimmInfo->
minimumCycleTimeAtMaxCasLatancy_RoP
>
- CFG_DDR_SDRAM_CYCLE_COUNT_ROP)))
+ CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_ROP)))
{
printf ("*********************************************************\n");
printf ("*** sysClock is higher than SDRAM's allowed frequency ***\n");
@@ -1289,37 +1289,37 @@
case 0x0:
case 0x80: /* refresh period is 15.625 usec */
sdram_config_reg =
- (unsigned int) (((float) 15.625 * (float) CFG_BUS_HZ)
+ (unsigned int) (((float) 15.625 * (float) CONFIG_SYS_BUS_HZ)
/ (float) 1000000.0);
break;
case 0x1:
case 0x81: /* refresh period is 3.9 usec */
sdram_config_reg =
- (unsigned int) (((float) 3.9 * (float) CFG_BUS_HZ) /
+ (unsigned int) (((float) 3.9 * (float) CONFIG_SYS_BUS_HZ) /
(float) 1000000.0);
break;
case 0x2:
case 0x82: /* refresh period is 7.8 usec */
sdram_config_reg =
- (unsigned int) (((float) 7.8 * (float) CFG_BUS_HZ) /
+ (unsigned int) (((float) 7.8 * (float) CONFIG_SYS_BUS_HZ) /
(float) 1000000.0);
break;
case 0x3:
case 0x83: /* refresh period is 31.3 usec */
sdram_config_reg =
- (unsigned int) (((float) 31.3 * (float) CFG_BUS_HZ) /
+ (unsigned int) (((float) 31.3 * (float) CONFIG_SYS_BUS_HZ) /
(float) 1000000.0);
break;
case 0x4:
case 0x84: /* refresh period is 62.5 usec */
sdram_config_reg =
- (unsigned int) (((float) 62.5 * (float) CFG_BUS_HZ) /
+ (unsigned int) (((float) 62.5 * (float) CONFIG_SYS_BUS_HZ) /
(float) 1000000.0);
break;
case 0x5:
case 0x85: /* refresh period is 125 usec */
sdram_config_reg =
- (unsigned int) (((float) 125 * (float) CFG_BUS_HZ) /
+ (unsigned int) (((float) 125 * (float) CONFIG_SYS_BUS_HZ) /
(float) 1000000.0);
break;
default: /* refresh period undefined */
@@ -1816,7 +1816,7 @@
printf ("-- DIMM2 has %d banks\n", dimmInfo2.numOfModuleBanks);
- for (bank_no = 0; bank_no < CFG_DRAM_BANKS; bank_no++) {
+ for (bank_no = 0; bank_no < CONFIG_SYS_DRAM_BANKS; bank_no++) {
/* skip over banks that are not populated */
if (!checkbank[bank_no])
continue;