rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/board/amcc/ocotea/config.mk b/board/amcc/ocotea/config.mk
index 9e18335..b62e776 100644
--- a/board/amcc/ocotea/config.mk
+++ b/board/amcc/ocotea/config.mk
@@ -40,5 +40,5 @@
endif
ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
endif
diff --git a/board/amcc/ocotea/flash.c b/board/amcc/ocotea/flash.c
index 46c6946..a83f93a 100644
--- a/board/amcc/ocotea/flash.c
+++ b/board/amcc/ocotea/flash.c
@@ -53,9 +53,9 @@
#define FLASH_ONBD_N_VAL 2
#define FLASH_SRAM_SEL_VAL 1
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-static unsigned long flash_addr_table[8][CFG_MAX_FLASH_BANKS] = {
+static unsigned long flash_addr_table[8][CONFIG_SYS_MAX_FLASH_BANKS] = {
{0xFF800000, 0xFF880000, 0xFFC00000}, /* 0:000: configuraton 4 */
{0xFF900000, 0xFF980000, 0xFFC00000}, /* 1:001: configuraton 3 */
{0x00000000, 0x00000000, 0x00000000}, /* 2:010: configuraton 8 */
@@ -83,8 +83,8 @@
unsigned long flash_init(void)
{
unsigned long total_b = 0;
- unsigned long size_b[CFG_MAX_FLASH_BANKS];
- unsigned char *fpga_base = (unsigned char *)CFG_FPGA_BASE;
+ unsigned long size_b[CONFIG_SYS_MAX_FLASH_BANKS];
+ unsigned char *fpga_base = (unsigned char *)CONFIG_SYS_FPGA_BASE;
unsigned char switch_status;
unsigned short index = 0;
int i;
@@ -107,7 +107,7 @@
DEBUGF("FLASH: Index: %d\n", index);
/* Init: no FLASHes known */
- for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
flash_info[i].sector_count = -1;
flash_info[i].size = 0;
@@ -131,8 +131,8 @@
}
/* Monitor protection ON by default */
- (void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
- CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+ (void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
&flash_info[i]);
#ifdef CONFIG_ENV_IS_IN_FLASH
(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR,
diff --git a/board/amcc/ocotea/init.S b/board/amcc/ocotea/init.S
index d211c71..8bcfbb1 100644
--- a/board/amcc/ocotea/init.S
+++ b/board/amcc/ocotea/init.S
@@ -49,9 +49,9 @@
* routine.
*/
- tlbentry(CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X)
- tlbentry(CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X)
- tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X)
+ tlbentry(CONFIG_SYS_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X)
+ tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I)
tlbtab_end
diff --git a/board/amcc/ocotea/ocotea.c b/board/amcc/ocotea/ocotea.c
index 4d1d093..fe45408 100644
--- a/board/amcc/ocotea/ocotea.c
+++ b/board/amcc/ocotea/ocotea.c
@@ -42,7 +42,7 @@
int board_early_init_f (void)
{
unsigned long mfr;
- unsigned char *fpga_base = (unsigned char *) CFG_FPGA_BASE;
+ unsigned char *fpga_base = (unsigned char *) CONFIG_SYS_FPGA_BASE;
unsigned char switch_status;
unsigned long cs0_base;
unsigned long cs0_size;
@@ -315,7 +315,7 @@
* may not be sufficient for a given board.
*
************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
void pci_target_init(struct pci_controller * hose )
{
/*--------------------------------------------------------------------------+
@@ -330,7 +330,7 @@
* Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
* options to not support sizes such as 128/256 MB.
*--------------------------------------------------------------------------*/
- out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
+ out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
out32r( PCIX0_PIM0LAH, 0 );
out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
@@ -339,12 +339,12 @@
/*--------------------------------------------------------------------------+
* Program the board's subsystem id/vendor id
*--------------------------------------------------------------------------*/
- out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
- out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
+ out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
+ out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
/*************************************************************************
diff --git a/board/amcc/ocotea/ocotea.h b/board/amcc/ocotea/ocotea.h
index 95ce1fd..400852a 100644
--- a/board/amcc/ocotea/ocotea.h
+++ b/board/amcc/ocotea/ocotea.h
@@ -22,7 +22,7 @@
*/
/* Board specific FPGA stuff ... */
-#define FPGA_REG0 (CFG_FPGA_BASE + 0x00)
+#define FPGA_REG0 (CONFIG_SYS_FPGA_BASE + 0x00)
#define FPGA_REG0_SSCG_MASK 0x80
#define FPGA_REG0_SSCG_DISABLE 0x00
#define FPGA_REG0_SSCG_ENABLE 0x80
@@ -48,7 +48,7 @@
#define FPGA_REG0_ONBOARD_FLASH_ENABLE 0x00
#define FPGA_REG0_ONBOARD_FLASH_DISABLE 0x02
#define FPGA_REG0_FLASH 0x01
-#define FPGA_REG1 (CFG_FPGA_BASE + 0x01)
+#define FPGA_REG1 (CONFIG_SYS_FPGA_BASE + 0x01)
#define FPGA_REG1_9772_FSELFBX_MASK 0x80
#define FPGA_REG1_9772_FSELFBX_6 0x00
#define FPGA_REG1_9772_FSELFBX_10 0x80
@@ -71,7 +71,7 @@
#define FPGA_REG1_SOURCE_SSDIV1 0x05
#define FPGA_REG1_SOURCE_SSDIV2 0x06
#define FPGA_REG1_SOURCE_SSDIV4 0x07
-#define FPGA_REG2 (CFG_FPGA_BASE + 0x02)
+#define FPGA_REG2 (CONFIG_SYS_FPGA_BASE + 0x02)
#define FPGA_REG2_TC0 0x80
#define FPGA_REG2_TC1 0x40
#define FPGA_REG2_TC2 0x20
@@ -82,7 +82,7 @@
#define FPGA_REG2_EXT_INTFACE_DISABLE 0x04
#define FPGA_REG2_SMII_RESET_DISABLE 0x02 /*Use on Ocotea pass 3 boards*/
#define FPGA_REG2_DEFAULT_UART1_N 0x01
-#define FPGA_REG3 (CFG_FPGA_BASE + 0x03)
+#define FPGA_REG3 (CONFIG_SYS_FPGA_BASE + 0x03)
#define FPGA_REG3_GIGABIT_RESET_DISABLE 0x80 /*Use on Ocotea pass 1 boards*/
#define FPGA_REG3_ENET_MASK1 0x70 /*Use on Ocotea pass 1 boards*/
#define FPGA_REG3_ENET_MASK2 0xF0 /*Use on Ocotea pass 2 boards*/
@@ -108,7 +108,7 @@
#define FPGA_REG3_STAT_LED4_DISAB 0x00
#define FPGA_REG3_STAT_LED2_DISAB 0x00
#define FPGA_REG3_STAT_LED1_DISAB 0x00
-#define FPGA_REG4 (CFG_FPGA_BASE + 0x04)
+#define FPGA_REG4 (CONFIG_SYS_FPGA_BASE + 0x04)
#define FPGA_REG4_GPHY_MODE10 0x80
#define FPGA_REG4_GPHY_MODE100 0x40
#define FPGA_REG4_GPHY_MODE1000 0x20