rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/board/dave/PPChameleonEVB/PPChameleonEVB.c b/board/dave/PPChameleonEVB/PPChameleonEVB.c
index c715ad4..a6aa655 100644
--- a/board/dave/PPChameleonEVB/PPChameleonEVB.c
+++ b/board/dave/PPChameleonEVB/PPChameleonEVB.c
@@ -38,8 +38,8 @@
int board_early_init_f (void)
{
- out32(GPIO0_OR, CFG_NAND0_CE); /* set initial outputs */
- out32(GPIO0_OR, CFG_NAND1_CE); /* set initial outputs */
+ out32(GPIO0_OR, CONFIG_SYS_NAND0_CE); /* set initial outputs */
+ out32(GPIO0_OR, CONFIG_SYS_NAND1_CE); /* set initial outputs */
/*
* IRQ 0-15 405GP internally generated; active high; level sensitive
@@ -85,10 +85,10 @@
{
/* adjust flash start and size as well as the offset */
gd->bd->bi_flashstart = 0 - flash_info[0].size;
- gd->bd->bi_flashoffset= flash_info[0].size - CFG_MONITOR_LEN;
+ gd->bd->bi_flashoffset= flash_info[0].size - CONFIG_SYS_MONITOR_LEN;
#if 0
volatile unsigned short *fpga_mode =
- (unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
+ (unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL);
volatile unsigned char *duart0_mcr =
(unsigned char *)((ulong)DUART0_BA + 4);
volatile unsigned char *duart1_mcr =
@@ -103,8 +103,8 @@
int i;
unsigned long cntrl0Reg;
- dst = malloc(CFG_FPGA_MAX_SIZE);
- if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
+ dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
+ if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
printf ("GUNZIP ERROR - must RESET board to recover\n");
do_reset (NULL, 0, 0, NULL);
}
@@ -168,7 +168,7 @@
/*
* Enable power on PS/2 interface
*/
- *fpga_mode |= CFG_FPGA_CTRL_PS2_RESET;
+ *fpga_mode |= CONFIG_SYS_FPGA_CTRL_PS2_RESET;
/*
* Enable interrupts in exar duart mcr[3]
diff --git a/board/dave/PPChameleonEVB/flash.c b/board/dave/PPChameleonEVB/flash.c
index 692d275..e5a0d3d 100644
--- a/board/dave/PPChameleonEVB/flash.c
+++ b/board/dave/PPChameleonEVB/flash.c
@@ -42,7 +42,7 @@
unsigned long flash_init (void)
{
#ifdef __DEBUG_START_FROM_SRAM__
- return CFG_DUMMY_FLASH_SIZE;
+ return CONFIG_SYS_DUMMY_FLASH_SIZE;
#else
unsigned long size;
int i;
@@ -54,7 +54,7 @@
debug("[%s, %d] flash_info = 0x%08X ...\n", __FUNCTION__, __LINE__, flash_info);
/* Init: no FLASHes known */
- for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
@@ -102,7 +102,7 @@
/* Monitor protection ON by default */
(void)flash_protect(FLAG_PROTECT_SET,
- -CFG_MONITOR_LEN,
+ -CONFIG_SYS_MONITOR_LEN,
0xffffffff,
&flash_info[0]);
diff --git a/board/dave/PPChameleonEVB/nand.c b/board/dave/PPChameleonEVB/nand.c
index 3ccbf650..14b61a4 100644
--- a/board/dave/PPChameleonEVB/nand.c
+++ b/board/dave/PPChameleonEVB/nand.c
@@ -67,11 +67,11 @@
/* use the base addr to find out which chip are we dealing with */
switch((ulong) this->IO_ADDR_W) {
- case CFG_NAND0_BASE:
- rb_gpio_pin = CFG_NAND0_RDY;
+ case CONFIG_SYS_NAND0_BASE:
+ rb_gpio_pin = CONFIG_SYS_NAND0_RDY;
break;
- case CFG_NAND1_BASE:
- rb_gpio_pin = CFG_NAND1_RDY;
+ case CONFIG_SYS_NAND1_BASE:
+ rb_gpio_pin = CONFIG_SYS_NAND1_RDY;
break;
default: /* this should never happen */
return 0;
diff --git a/board/dave/PPChameleonEVB/u-boot.lds b/board/dave/PPChameleonEVB/u-boot.lds
index e42c76f..ed02cef 100644
--- a/board/dave/PPChameleonEVB/u-boot.lds
+++ b/board/dave/PPChameleonEVB/u-boot.lds
@@ -143,7 +143,7 @@
*(COMMON)
}
- ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
+ ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified.");
. = 0xFFFF8000;
.ppcenv :
{