rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/board/davinci/sffsdr/sffsdr.c b/board/davinci/sffsdr/sffsdr.c
index 6e878eb..9296d7b 100644
--- a/board/davinci/sffsdr/sffsdr.c
+++ b/board/davinci/sffsdr/sffsdr.c
@@ -63,10 +63,10 @@
lpsc_on(DAVINCI_LPSC_TIMER1);
lpsc_on(DAVINCI_LPSC_GPIO);
-#if !defined(CFG_USE_DSPLINK)
+#if !defined(CONFIG_SYS_USE_DSPLINK)
/* Powerup the DSP */
dsp_on();
-#endif /* CFG_USE_DSPLINK */
+#endif /* CONFIG_SYS_USE_DSPLINK */
/* Bringup UART0 out of reset */
REG(UART0_PWREMU_MGMT) = 0x0000e003;
@@ -99,35 +99,35 @@
u_int32_t value, mac[2], address;
/* Read Integrity data structure checkword. */
- if (i2c_read(CFG_I2C_EEPROM_ADDR, INTEGRITY_CHECKWORD_OFFSET,
- CFG_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
+ if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, INTEGRITY_CHECKWORD_OFFSET,
+ CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
goto err;
if (value != INTEGRITY_CHECKWORD_VALUE)
return 0;
/* Read SYSCFG structure offset. */
- if (i2c_read(CFG_I2C_EEPROM_ADDR, INTEGRITY_SYSCFG_OFFSET,
- CFG_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
+ if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, INTEGRITY_SYSCFG_OFFSET,
+ CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
goto err;
address = 0x800 + (int) value; /* Address of SYSCFG structure. */
/* Read NET CONFIG structure offset. */
- if (i2c_read(CFG_I2C_EEPROM_ADDR, address,
- CFG_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
+ if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, address,
+ CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
goto err;
address = 0x800 + (int) value; /* Address of NET CONFIG structure. */
address += 12; /* Address of NET INTERFACE CONFIG structure. */
/* Read NET INTERFACE CONFIG 2 structure offset. */
- if (i2c_read(CFG_I2C_EEPROM_ADDR, address,
- CFG_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
+ if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, address,
+ CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
goto err;
address = 0x800 + 16 + (int) value; /* Address of NET INTERFACE
* CONFIG 2 structure. */
/* Read MAC address. */
- if (i2c_read(CFG_I2C_EEPROM_ADDR, address,
- CFG_I2C_EEPROM_ADDR_LEN, (uint8_t *) &mac[0], 8))
+ if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, address,
+ CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &mac[0], 8))
goto err;
buf[0] = mac[0] >> 24;
@@ -140,7 +140,7 @@
return 1; /* Found */
err:
- printf("Read from EEPROM @ 0x%02x failed\n", CFG_I2C_EEPROM_ADDR);
+ printf("Read from EEPROM @ 0x%02x failed\n", CONFIG_SYS_I2C_EEPROM_ADDR);
return 0;
}
@@ -156,10 +156,10 @@
dv_display_clk_infos();
/* Configure I2C switch (PCA9543) to enable channel 0. */
- i2cbuf = CFG_I2C_PCA9543_ENABLE_CH0;
- if (i2c_write(CFG_I2C_PCA9543_ADDR, 0,
- CFG_I2C_PCA9543_ADDR_LEN, &i2cbuf, 1)) {
- printf("Write to MUX @ 0x%02x failed\n", CFG_I2C_PCA9543_ADDR);
+ i2cbuf = CONFIG_SYS_I2C_PCA9543_ENABLE_CH0;
+ if (i2c_write(CONFIG_SYS_I2C_PCA9543_ADDR, 0,
+ CONFIG_SYS_I2C_PCA9543_ADDR_LEN, &i2cbuf, 1)) {
+ printf("Write to MUX @ 0x%02x failed\n", CONFIG_SYS_I2C_PCA9543_ADDR);
return 1;
}