rename CFG_ macros to CONFIG_SYS

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/board/eltec/mhpc/flash.c b/board/eltec/mhpc/flash.c
index 4cc66a9..2fbdb27 100644
--- a/board/eltec/mhpc/flash.c
+++ b/board/eltec/mhpc/flash.c
@@ -25,7 +25,7 @@
 #include <mpc8xx.h>
 #include <linux/byteorder/swab.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*-----------------------------------------------------------------------
  * Protection Flags:
@@ -62,13 +62,13 @@
 
 unsigned long flash_init (void)
 {
-	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long size_b0;
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -81,18 +81,18 @@
 	}
 
 	/* Remap FLASH according to real size */
-	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
-	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_MS_GPCM | BR_V;
+	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
+	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_MS_GPCM | BR_V;
 
 	/* Re-do sizing to get full correct info */
-	size_b0 = flash_get_size((FPW *)CFG_FLASH_BASE, &flash_info[0]);
+	size_b0 = flash_get_size((FPW *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
 	/* monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    CFG_FLASH_BASE,
-			    CFG_FLASH_BASE+monitor_flash_len-1,
+			    CONFIG_SYS_FLASH_BASE,
+			    CONFIG_SYS_FLASH_BASE+monitor_flash_len-1,
 			    &flash_info[0]);
 
 	flash_info[0].size = size_b0;
@@ -203,10 +203,10 @@
 		break;
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	addr[0] = (FPW)0xFF00FF00;      /* restore read mode */
@@ -277,7 +277,7 @@
 			udelay (1000);
 
 			while (((status = SWAP(*addr)) & (FPW)0x00800080) != (FPW)0x00800080) {
-				if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+				if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					*addr = (FPW)0xB000B000; /* suspend erase */
 					*addr = (FPW)0xFF00FF00; /* reset to read mode */
@@ -419,7 +419,7 @@
 	start = get_timer (0);
 
 	while (((status = SWAP(*addr)) & (FPW)0x00800080) != (FPW)0x00800080) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = (FPW)0xFF00FF00;	/* restore read mode */
 			return (1);
 		}