rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/board/esd/common/lcd.c b/board/esd/common/lcd.c
index c23dc81..1eea59e 100644
--- a/board/esd/common/lcd.c
+++ b/board/esd/common/lcd.c
@@ -37,7 +37,7 @@
unsigned char *glob_lcd_reg;
unsigned char *glob_lcd_mem;
-#if defined(CFG_LCD_ENDIAN)
+#if defined(CONFIG_SYS_LCD_ENDIAN)
void lcd_setup(int lcd, int config)
{
if (lcd == 0) {
@@ -47,21 +47,21 @@
/* set reset to low */
out_be32((void*)GPIO0_OR,
- in_be32((void*)GPIO0_OR) & ~CFG_LCD0_RST);
+ in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_LCD0_RST);
udelay(10); /* wait 10us */
if (config == 1) {
/* big-endian */
out_be32((void*)GPIO0_OR,
- in_be32((void*)GPIO0_OR) | CFG_LCD_ENDIAN);
+ in_be32((void*)GPIO0_OR) | CONFIG_SYS_LCD_ENDIAN);
} else {
/* little-endian */
out_be32((void*)GPIO0_OR,
- in_be32((void*)GPIO0_OR) & ~CFG_LCD_ENDIAN);
+ in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_LCD_ENDIAN);
}
udelay(10); /* wait 10us */
/* set reset to high */
out_be32((void*)GPIO0_OR,
- in_be32((void*)GPIO0_OR) | CFG_LCD0_RST);
+ in_be32((void*)GPIO0_OR) | CONFIG_SYS_LCD0_RST);
} else {
/*
* Set endianess and reset lcd controller 1 (big)
@@ -69,29 +69,29 @@
/* set reset to low */
out_be32((void*)GPIO0_OR,
- in_be32((void*)GPIO0_OR) & ~CFG_LCD1_RST);
+ in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_LCD1_RST);
udelay(10); /* wait 10us */
if (config == 1) {
/* big-endian */
out_be32((void*)GPIO0_OR,
- in_be32((void*)GPIO0_OR) | CFG_LCD_ENDIAN);
+ in_be32((void*)GPIO0_OR) | CONFIG_SYS_LCD_ENDIAN);
} else {
/* little-endian */
out_be32((void*)GPIO0_OR,
- in_be32((void*)GPIO0_OR) & ~CFG_LCD_ENDIAN);
+ in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_LCD_ENDIAN);
}
udelay(10); /* wait 10us */
/* set reset to high */
out_be32((void*)GPIO0_OR,
- in_be32((void*)GPIO0_OR) | CFG_LCD1_RST);
+ in_be32((void*)GPIO0_OR) | CONFIG_SYS_LCD1_RST);
}
/*
- * CFG_LCD_ENDIAN may also be FPGA_RESET, so set inactive
+ * CONFIG_SYS_LCD_ENDIAN may also be FPGA_RESET, so set inactive
*/
- out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_LCD_ENDIAN);
+ out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_LCD_ENDIAN);
}
-#endif /* CFG_LCD_ENDIAN */
+#endif /* CONFIG_SYS_LCD_ENDIAN */
int lcd_bmp(uchar *logo_bmp)
@@ -116,20 +116,20 @@
/*
* Decompress bmp image
*/
- len = CFG_VIDEO_LOGO_MAX_SIZE;
- dst = malloc(CFG_VIDEO_LOGO_MAX_SIZE);
+ len = CONFIG_SYS_VIDEO_LOGO_MAX_SIZE;
+ dst = malloc(CONFIG_SYS_VIDEO_LOGO_MAX_SIZE);
if (dst == NULL) {
printf("Error: malloc for gunzip failed!\n");
return 1;
}
- if (gunzip(dst, CFG_VIDEO_LOGO_MAX_SIZE,
+ if (gunzip(dst, CONFIG_SYS_VIDEO_LOGO_MAX_SIZE,
(uchar *)logo_bmp, &len) != 0) {
free(dst);
return 1;
}
- if (len == CFG_VIDEO_LOGO_MAX_SIZE) {
+ if (len == CONFIG_SYS_VIDEO_LOGO_MAX_SIZE) {
printf("Image could be truncated"
- " (increase CFG_VIDEO_LOGO_MAX_SIZE)!\n");
+ " (increase CONFIG_SYS_VIDEO_LOGO_MAX_SIZE)!\n");
}
/*