rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/board/keymile/mgcoge/mgcoge.c b/board/keymile/mgcoge/mgcoge.c
index 31703ab..7d4d9e6 100644
--- a/board/keymile/mgcoge/mgcoge.c
+++ b/board/keymile/mgcoge/mgcoge.c
@@ -238,7 +238,7 @@
* accessing the SDRAM with a single-byte transaction."
*
* The appropriate BRx/ORx registers have already been set when we
- * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+ * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
*/
*sdmr_ptr = sdmr | PSDMR_OP_PREA;
@@ -249,7 +249,7 @@
*base = c;
*sdmr_ptr = sdmr | PSDMR_OP_MRW;
- *(base + CFG_MRS_OFFS) = c; /* setting MR on address lines */
+ *(base + CONFIG_SYS_MRS_OFFS) = c; /* setting MR on address lines */
*sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
*base = c;
@@ -262,20 +262,20 @@
phys_size_t initdram (int board_type)
{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8260_t *memctl = &immap->im_memctl;
long psize;
- memctl->memc_psrt = CFG_PSRT;
- memctl->memc_mptpr = CFG_MPTPR;
+ memctl->memc_psrt = CONFIG_SYS_PSRT;
+ memctl->memc_mptpr = CONFIG_SYS_MPTPR;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
/* 60x SDRAM setup:
*/
- psize = try_init (memctl, CFG_PSDMR, CFG_OR1,
- (uchar *) CFG_SDRAM_BASE);
-#endif /* CFG_RAMBOOT */
+ psize = try_init (memctl, CONFIG_SYS_PSDMR, CONFIG_SYS_OR1,
+ (uchar *) CONFIG_SYS_SDRAM_BASE);
+#endif /* CONFIG_SYS_RAMBOOT */
icache_enable ();
@@ -295,8 +295,8 @@
int board_early_init_r (void)
{
/* setup the UPIOx */
- *(char *)(CFG_PIGGY_BASE + 0x02) = 0xc0;
- *(char *)(CFG_PIGGY_BASE + 0x03) = 0x15;
+ *(char *)(CONFIG_SYS_PIGGY_BASE + 0x02) = 0xc0;
+ *(char *)(CONFIG_SYS_PIGGY_BASE + 0x03) = 0x15;
return 0;
}
@@ -332,12 +332,12 @@
"err:%s\n", fdt_strerror (nodeoffset));
}
/* update Flash addr, size */
- flash_data[2] = cpu_to_be32 (CFG_FLASH_BASE);
- flash_data[3] = cpu_to_be32 (CFG_FLASH_SIZE);
+ flash_data[2] = cpu_to_be32 (CONFIG_SYS_FLASH_BASE);
+ flash_data[3] = cpu_to_be32 (CONFIG_SYS_FLASH_SIZE);
flash_data[4] = cpu_to_be32 (1);
flash_data[5] = cpu_to_be32 (0);
- flash_data[6] = cpu_to_be32 (CFG_FLASH_BASE_1);
- flash_data[7] = cpu_to_be32 (CFG_FLASH_SIZE_1);
+ flash_data[6] = cpu_to_be32 (CONFIG_SYS_FLASH_BASE_1);
+ flash_data[7] = cpu_to_be32 (CONFIG_SYS_FLASH_SIZE_1);
nodeoffset = fdt_path_offset (blob, "/localbus");
if (nodeoffset >= 0) {
ret = fdt_setprop (blob, nodeoffset, "ranges", flash_data,