rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/board/nx823/flash.c b/board/nx823/flash.c
index 581925e..194d841 100644
--- a/board/nx823/flash.c
+++ b/board/nx823/flash.c
@@ -27,7 +27,7 @@
#include <common.h>
#include <mpc8xx.h>
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
extern u_long *my_sernum; /* from nx823.c */
/*-----------------------------------------------------------------------
@@ -63,13 +63,13 @@
unsigned long flash_init (void)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
unsigned long size_b0;
int i;
/* Init: no FLASHes known */
- for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
@@ -82,18 +82,18 @@
}
/* Remap FLASH according to real size */
- memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
- memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_MS_GPCM | BR_V;
+ memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
+ memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_MS_GPCM | BR_V;
/* Re-do sizing to get full correct info */
- size_b0 = flash_get_size((FPW *)CFG_FLASH_BASE, &flash_info[0]);
+ size_b0 = flash_get_size((FPW *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
- flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+ flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
/* monitor protection ON by default */
(void)flash_protect(FLAG_PROTECT_SET,
- CFG_FLASH_BASE,
- CFG_FLASH_BASE+monitor_flash_len-1,
+ CONFIG_SYS_FLASH_BASE,
+ CONFIG_SYS_FLASH_BASE+monitor_flash_len-1,
&flash_info[0]);
flash_info[0].size = size_b0;
@@ -220,10 +220,10 @@
break;
}
- if (info->sector_count > CFG_MAX_FLASH_SECT) {
+ if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
printf ("** ERROR: sector count %d > max (%d) **\n",
- info->sector_count, CFG_MAX_FLASH_SECT);
- info->sector_count = CFG_MAX_FLASH_SECT;
+ info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+ info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
}
addr[0] = (FPW)0x00FF00FF; /* restore read mode */
@@ -294,7 +294,7 @@
udelay (1000);
while (((status = *addr) & (FPW)0x00800080) != (FPW)0x00800080) {
- if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
*addr = (FPW)0x00B000B0; /* suspend erase */
*addr = (FPW)0x00FF00FF; /* reset to read mode */
@@ -343,9 +343,9 @@
#endif
/* save sernum if needed */
- if (addr >= CFG_FLASH_SN_SECTOR && addr < CFG_FLASH_SN_BASE)
+ if (addr >= CONFIG_SYS_FLASH_SN_SECTOR && addr < CONFIG_SYS_FLASH_SN_BASE)
{
- u_long dest = CFG_FLASH_SN_BASE;
+ u_long dest = CONFIG_SYS_FLASH_SN_BASE;
u_short *sn = (u_short *)my_sernum;
printf("(saving sernum)");
@@ -452,7 +452,7 @@
start = get_timer (0);
while (((status = *addr) & (FPW)0x00800080) != (FPW)0x00800080) {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
*addr = (FPW)0x00FF00FF; /* restore read mode */
return (1);
}