rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/board/sbc8260/flash.c b/board/sbc8260/flash.c
index d3b1f31..645c67f 100644
--- a/board/sbc8260/flash.c
+++ b/board/sbc8260/flash.c
@@ -31,7 +31,7 @@
#include <common.h>
#include <mpc8xx.h>
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
/*-----------------------------------------------------------------------
* Functions
@@ -49,21 +49,21 @@
int i;
/* Init: no FLASHes known */
- for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
/* for now, only support the 4 MB Flash SIMM */
- size = flash_get_size((vu_long *)CFG_FLASH0_BASE, &flash_info[0]);
+ size = flash_get_size((vu_long *)CONFIG_SYS_FLASH0_BASE, &flash_info[0]);
/*
* protect monitor and environment sectors
*/
-#if CFG_MONITOR_BASE >= CFG_FLASH0_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH0_BASE
flash_protect(FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE+monitor_flash_len-1,
+ CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
&flash_info[0]);
#endif
@@ -77,7 +77,7 @@
&flash_info[0]);
#endif
- return /*size*/ (CFG_FLASH0_SIZE * 1024 * 1024);
+ return /*size*/ (CONFIG_SYS_FLASH0_SIZE * 1024 * 1024);
}
/*-----------------------------------------------------------------------
@@ -258,7 +258,7 @@
last = start;
addr = (vu_long*)(info->start[l_sect]);
while ((addr[0] & 0x80808080) != 0x80808080) {
- if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
return 1;
}
@@ -381,7 +381,7 @@
/* data polling for D7 */
start = get_timer (0);
while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
return (1);
}
}
diff --git a/board/sbc8260/sbc8260.c b/board/sbc8260/sbc8260.c
index 5781f62..f5f23be 100644
--- a/board/sbc8260/sbc8260.c
+++ b/board/sbc8260/sbc8260.c
@@ -210,10 +210,10 @@
phys_size_t initdram (int board_type)
{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8260_t *memctl = &immap->im_memctl;
- volatile uchar c = 0, *ramaddr = (uchar *) (CFG_SDRAM_BASE + 0x8);
- ulong psdmr = CFG_PSDMR;
+ volatile uchar c = 0, *ramaddr = (uchar *) (CONFIG_SYS_SDRAM_BASE + 0x8);
+ ulong psdmr = CONFIG_SYS_PSDMR;
int i;
/*
@@ -233,11 +233,11 @@
* accessing the SDRAM with a single-byte transaction."
*
* The appropriate BRx/ORx registers have already been set when we
- * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+ * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
*/
- memctl->memc_psrt = CFG_PSRT;
- memctl->memc_mptpr = CFG_MPTPR;
+ memctl->memc_psrt = CONFIG_SYS_PSRT;
+ memctl->memc_mptpr = CONFIG_SYS_MPTPR;
memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
*ramaddr = c;
@@ -253,15 +253,15 @@
*ramaddr = c;
/* return total ram size */
- return (CFG_SDRAM0_SIZE * 1024 * 1024);
+ return (CONFIG_SYS_SDRAM0_SIZE * 1024 * 1024);
}
#ifdef CONFIG_MISC_INIT_R
/* ------------------------------------------------------------------------- */
int misc_init_r (void)
{
-#ifdef CFG_LED_BASE
- uchar ds = *(unsigned char *) (CFG_LED_BASE + 1);
+#ifdef CONFIG_SYS_LED_BASE
+ uchar ds = *(unsigned char *) (CONFIG_SYS_LED_BASE + 1);
uchar ss;
uchar tmp[64];
int res;
@@ -280,10 +280,10 @@
tmp[17] = '\0';
setenv ("ethaddr", tmp);
/* set the led to show the address */
- *((unsigned char *) (CFG_LED_BASE + 1)) = ds;
+ *((unsigned char *) (CONFIG_SYS_LED_BASE + 1)) = ds;
}
}
-#endif /* CFG_LED_BASE */
+#endif /* CONFIG_SYS_LED_BASE */
return (0);
}
#endif /* CONFIG_MISC_INIT_R */