rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/cpu/arm1176/start.S b/cpu/arm1176/start.S
index 991277f..cb891df 100644
--- a/cpu/arm1176/start.S
+++ b/cpu/arm1176/start.S
@@ -37,8 +37,8 @@
#endif
#include <s3c6400.h>
-#if !defined(CONFIG_ENABLE_MMU) && !defined(CFG_PHY_UBOOT_BASE)
-#define CFG_PHY_UBOOT_BASE CFG_UBOOT_BASE
+#if !defined(CONFIG_ENABLE_MMU) && !defined(CONFIG_SYS_PHY_UBOOT_BASE)
+#define CONFIG_SYS_PHY_UBOOT_BASE CONFIG_SYS_UBOOT_BASE
#endif
/*
@@ -105,7 +105,7 @@
* by scsuh.
*/
_TEXT_PHY_BASE:
- .word CFG_PHY_UBOOT_BASE
+ .word CONFIG_SYS_PHY_UBOOT_BASE
.globl _armboot_start
_armboot_start:
@@ -209,7 +209,7 @@
/* Set the TTB register */
ldr r0, _mmu_table_base
- ldr r1, =CFG_PHY_UBOOT_BASE
+ ldr r1, =CONFIG_SYS_PHY_UBOOT_BASE
ldr r2, =0xfff00000
bic r0, r0, r2
orr r1, r0, r1
@@ -242,11 +242,11 @@
/* Set up the stack */
stack_setup:
#ifdef CONFIG_MEMORY_UPPER_CODE
- ldr sp, =(CFG_UBOOT_BASE + CFG_UBOOT_SIZE - 0xc)
+ ldr sp, =(CONFIG_SYS_UBOOT_BASE + CONFIG_SYS_UBOOT_SIZE - 0xc)
#else
ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */
- sub r0, r0, #CFG_MALLOC_LEN /* malloc area */
- sub r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo */
+ sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */
+ sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */
sub sp, r0, #12 /* leave 3 words for abort-stack */
#endif
@@ -357,9 +357,9 @@
stmia sp, {r0 - r12}
ldr r2, _armboot_start
- sub r2, r2, #(CFG_MALLOC_LEN)
+ sub r2, r2, #(CONFIG_SYS_MALLOC_LEN)
/* set base 2 words into abort stack */
- sub r2, r2, #(CFG_GBL_DATA_SIZE+8)
+ sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)
/* get values for "aborted" pc and cpsr (into parm regs) */
ldmia r2, {r2 - r3}
/* grab pointer to old stack */
@@ -377,9 +377,9 @@
/* setup our mode stack (enter in banked mode) */
ldr r13, _armboot_start
/* move past malloc pool */
- sub r13, r13, #(CFG_MALLOC_LEN)
+ sub r13, r13, #(CONFIG_SYS_MALLOC_LEN)
/* move to reserved a couple spots for abort stack */
- sub r13, r13, #(CFG_GBL_DATA_SIZE + 8)
+ sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE + 8)
/* save caller lr in position 0 of saved stack */
str lr, [r13]
@@ -407,9 +407,9 @@
/* get data regions start */
ldr r0, _armboot_start
/* move past malloc pool */
- sub r0, r0, #(CFG_MALLOC_LEN)
+ sub r0, r0, #(CONFIG_SYS_MALLOC_LEN)
/* move past gbl and a couple spots for abort stack */
- sub r0, r0, #(CFG_GBL_DATA_SIZE + 8)
+ sub r0, r0, #(CONFIG_SYS_GBL_DATA_SIZE + 8)
/* save caller lr in position 0 of saved stack */
str lr, [r0]
/* get the spsr */