rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/cpu/arm920t/at91rm9200/i2c.c b/cpu/arm920t/at91rm9200/i2c.c
index 90f95df..b68c5dd 100644
--- a/cpu/arm920t/at91rm9200/i2c.c
+++ b/cpu/arm920t/at91rm9200/i2c.c
@@ -120,7 +120,7 @@
i2c_read (unsigned char chip, unsigned int addr, int alen,
unsigned char *buffer, int len)
{
-#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
/* we only allow one address byte */
if (alen > 1)
return 1;
@@ -139,7 +139,7 @@
i2c_write(unsigned char chip, unsigned int addr, int alen,
unsigned char *buffer, int len)
{
-#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
int i;
unsigned char *buf;
@@ -210,7 +210,7 @@
unsigned int i2c_get_bus_speed(void)
{
- return CFG_I2C_SPEED;
+ return CONFIG_SYS_I2C_SPEED;
}
#endif /* CONFIG_HARD_I2C */
diff --git a/cpu/arm920t/at91rm9200/interrupts.c b/cpu/arm920t/at91rm9200/interrupts.c
index 1054602..5f0703c 100644
--- a/cpu/arm920t/at91rm9200/interrupts.c
+++ b/cpu/arm920t/at91rm9200/interrupts.c
@@ -35,8 +35,8 @@
#include <asm/arch/hardware.h>
/*#include <asm/proc/ptrace.h>*/
-/* the number of clocks per CFG_HZ */
-#define TIMER_LOAD_VAL (CFG_HZ_CLOCK/CFG_HZ)
+/* the number of clocks per CONFIG_SYS_HZ */
+#define TIMER_LOAD_VAL (CONFIG_SYS_HZ_CLOCK/CONFIG_SYS_HZ)
/* macro to read the 16 bit timer */
#define READ_TIMER (tmr->TC_CV & 0x0000ffff)
@@ -126,7 +126,7 @@
ulong endtime;
signed long diff;
- tmo = CFG_HZ_CLOCK / 1000;
+ tmo = CONFIG_SYS_HZ_CLOCK / 1000;
tmo *= usec;
tmo /= 1000;
@@ -155,7 +155,7 @@
{
ulong tbclk;
- tbclk = CFG_HZ;
+ tbclk = CONFIG_SYS_HZ;
return tbclk;
}
diff --git a/cpu/arm920t/at91rm9200/lowlevel_init.S b/cpu/arm920t/at91rm9200/lowlevel_init.S
index 98363eb..66b07da 100644
--- a/cpu/arm920t/at91rm9200/lowlevel_init.S
+++ b/cpu/arm920t/at91rm9200/lowlevel_init.S
@@ -79,7 +79,7 @@
/* Get the CKGR Base Address */
ldr r1, =AT91C_BASE_CKGR
/* Main oscillator Enable register */
-#ifdef CFG_USE_MAIN_OSCILLATOR
+#ifdef CONFIG_SYS_USE_MAIN_OSCILLATOR
ldr r0, =0x0000FF01 /* Enable main oscillator, OSCOUNT = 0xFF */
#else
ldr r0, =0x0000FF00 /* Disable main oscillator, OSCOUNT = 0xFF */
diff --git a/cpu/arm920t/at91rm9200/spi.c b/cpu/arm920t/at91rm9200/spi.c
index 265d185..f3cb5d8 100644
--- a/cpu/arm920t/at91rm9200/spi.c
+++ b/cpu/arm920t/at91rm9200/spi.c
@@ -137,11 +137,11 @@
AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTEN + AT91C_PDC_RXTEN;
while(!(AT91C_BASE_SPI->SPI_SR & AT91C_SPI_RXBUFF) &&
- ((timeout = get_timer_masked() ) < CFG_SPI_WRITE_TOUT));
+ ((timeout = get_timer_masked() ) < CONFIG_SYS_SPI_WRITE_TOUT));
AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS;
pDesc->state = IDLE;
- if (timeout >= CFG_SPI_WRITE_TOUT){
+ if (timeout >= CONFIG_SYS_SPI_WRITE_TOUT){
printf("Error Timeout\n\r");
return DATAFLASH_ERROR;
}
diff --git a/cpu/arm920t/at91rm9200/usb.c b/cpu/arm920t/at91rm9200/usb.c
index c121de6..72355dc 100644
--- a/cpu/arm920t/at91rm9200/usb.c
+++ b/cpu/arm920t/at91rm9200/usb.c
@@ -23,7 +23,7 @@
#include <common.h>
-#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT)
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
# ifdef CONFIG_AT91RM9200
#include <asm/arch/hardware.h>
@@ -50,4 +50,4 @@
}
# endif /* CONFIG_AT91RM9200 */
-#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */
+#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */
diff --git a/cpu/arm920t/cpu.c b/cpu/arm920t/cpu.c
index f93bf57..1b9cde6 100644
--- a/cpu/arm920t/cpu.c
+++ b/cpu/arm920t/cpu.c
@@ -95,7 +95,7 @@
* setup up stacks if necessary
*/
#ifdef CONFIG_USE_IRQ
- IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
+ IRQ_STACK_START = _armboot_start - CONFIG_SYS_MALLOC_LEN - CONFIG_SYS_GBL_DATA_SIZE - 4;
FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
#endif
return 0;
diff --git a/cpu/arm920t/imx/interrupts.c b/cpu/arm920t/imx/interrupts.c
index c61d3bc..ddcfb34 100644
--- a/cpu/arm920t/imx/interrupts.c
+++ b/cpu/arm920t/imx/interrupts.c
@@ -112,7 +112,7 @@
{
ulong tbclk;
- tbclk = CFG_HZ;
+ tbclk = CONFIG_SYS_HZ;
return tbclk;
}
diff --git a/cpu/arm920t/interrupts.c b/cpu/arm920t/interrupts.c
index c9cd066..09c54db 100644
--- a/cpu/arm920t/interrupts.c
+++ b/cpu/arm920t/interrupts.c
@@ -42,7 +42,7 @@
/* ASSUMED to be a timer interrupt */
/* Just clear it - count handled in */
/* integratorap.c */
- *(volatile ulong *)(CFG_TIMERBASE + 0x0C) = 0;
+ *(volatile ulong *)(CONFIG_SYS_TIMERBASE + 0x0C) = 0;
#else
#error do_irq() not defined for this cpu type
#endif
diff --git a/cpu/arm920t/s3c24x0/i2c.c b/cpu/arm920t/s3c24x0/i2c.c
index 374b683..fba5cd1 100644
--- a/cpu/arm920t/s3c24x0/i2c.c
+++ b/cpu/arm920t/s3c24x0/i2c.c
@@ -384,7 +384,7 @@
xaddr[3] = addr & 0xFF;
}
-#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
/*
* EEPROM chips that implement "address overflow" are ones
* like Catalyst 24WC04/08/16 which has 9/10/11 bits of
@@ -397,7 +397,7 @@
* hidden in the chip address.
*/
if (alen > 0)
- chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
+ chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
#endif
if ((ret =
i2c_transfer (I2C_READ, chip << 1, &xaddr[4 - alen], alen,
@@ -423,7 +423,7 @@
xaddr[2] = (addr >> 8) & 0xFF;
xaddr[3] = addr & 0xFF;
}
-#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
/*
* EEPROM chips that implement "address overflow" are ones
* like Catalyst 24WC04/08/16 which has 9/10/11 bits of
@@ -436,7 +436,7 @@
* hidden in the chip address.
*/
if (alen > 0)
- chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
+ chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
#endif
return (i2c_transfer
(I2C_WRITE, chip << 1, &xaddr[4 - alen], alen, buffer,
diff --git a/cpu/arm920t/s3c24x0/interrupts.c b/cpu/arm920t/s3c24x0/interrupts.c
index 7ad9fcb..11e6804 100644
--- a/cpu/arm920t/s3c24x0/interrupts.c
+++ b/cpu/arm920t/s3c24x0/interrupts.c
@@ -179,7 +179,7 @@
#elif defined(CONFIG_SBC2410X) || \
defined(CONFIG_SMDK2410) || \
defined(CONFIG_VCMA9)
- tbclk = CFG_HZ;
+ tbclk = CONFIG_SYS_HZ;
#else
# error "tbclk not configured"
#endif
diff --git a/cpu/arm920t/s3c24x0/usb.c b/cpu/arm920t/s3c24x0/usb.c
index 421ebb4..9ccf575 100644
--- a/cpu/arm920t/s3c24x0/usb.c
+++ b/cpu/arm920t/s3c24x0/usb.c
@@ -23,7 +23,7 @@
#include <common.h>
-#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT)
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
# if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410)
#if defined(CONFIG_S3C2400)
@@ -69,4 +69,4 @@
}
# endif /* defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) */
-#endif /* defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT) */
+#endif /* defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */
diff --git a/cpu/arm920t/start.S b/cpu/arm920t/start.S
index 5d0fec6..17977c2 100644
--- a/cpu/arm920t/start.S
+++ b/cpu/arm920t/start.S
@@ -202,8 +202,8 @@
/* Set up the stack */
stack_setup:
ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */
- sub r0, r0, #CFG_MALLOC_LEN /* malloc area */
- sub r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo */
+ sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */
+ sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */
#ifdef CONFIG_USE_IRQ
sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
#endif
@@ -316,8 +316,8 @@
stmia sp, {r0 - r12} @ Calling r0-r12
ldr r2, _armboot_start
sub r2, r2, #(CONFIG_STACKSIZE)
- sub r2, r2, #(CFG_MALLOC_LEN)
- sub r2, r2, #(CFG_GBL_DATA_SIZE+8) @ set base 2 words into abort stack
+ sub r2, r2, #(CONFIG_SYS_MALLOC_LEN)
+ sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ set base 2 words into abort stack
ldmia r2, {r2 - r3} @ get pc, cpsr
add r0, sp, #S_FRAME_SIZE @ restore sp_SVC
@@ -350,8 +350,8 @@
.macro get_bad_stack
ldr r13, _armboot_start @ setup our mode stack
sub r13, r13, #(CONFIG_STACKSIZE)
- sub r13, r13, #(CFG_MALLOC_LEN)
- sub r13, r13, #(CFG_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
+ sub r13, r13, #(CONFIG_SYS_MALLOC_LEN)
+ sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
str lr, [r13] @ save caller lr / spsr
mrs lr, spsr