rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/cpu/mcf547x_8x/start.S b/cpu/mcf547x_8x/start.S
index 87355f9..41fc694 100644
--- a/cpu/mcf547x_8x/start.S
+++ b/cpu/mcf547x_8x/start.S
@@ -29,9 +29,9 @@
#endif
/* last three long word reserved for cache status */
-#define ICACHE_STATUS (CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END- 4)
-#define DCACHE_STATUS (CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END- 8)
-#define CACR_STATUS (CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-12)
+#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END- 4)
+#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END- 8)
+#define CACR_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-12)
#define _START _start
#define _FAULT _fault
@@ -132,16 +132,16 @@
move.w #0x2700,%sr /* Mask off Interrupt */
/* Set vector base register at the beginning of the Flash */
- move.l #CFG_FLASH_BASE, %d0
+ move.l #CONFIG_SYS_FLASH_BASE, %d0
movec %d0, %VBR
- move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_RAM_CTRL), %d0
+ move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0
movec %d0, %RAMBAR0
- move.l #(CFG_INIT_RAM1_ADDR + CFG_INIT_RAM1_CTRL), %d0
+ move.l #(CONFIG_SYS_INIT_RAM1_ADDR + CONFIG_SYS_INIT_RAM1_CTRL), %d0
movec %d0, %RAMBAR1
- move.l #CFG_MBAR, %d0 /* set MBAR address */
+ move.l #CONFIG_SYS_MBAR, %d0 /* set MBAR address */
move.c %d0, %MBAR
/* invalidate and disable cache */
@@ -164,7 +164,7 @@
/* set stackpointer to end of internal ram to get some stackspace for the
first c-code */
- move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET), %sp
+ move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp
clr.l %sp@-
move.l #__got_start, %a5 /* put relocation table address to a5 */
@@ -195,7 +195,7 @@
move.l 12(%a6), %d0 /* Save copy of Global Data pointer */
move.l 16(%a6), %a0 /* Save copy of Destination Address */
- move.l #CFG_MONITOR_BASE, %a1
+ move.l #CONFIG_SYS_MONITOR_BASE, %a1
move.l #__init_end, %a2
move.l %a0, %a3
@@ -210,7 +210,7 @@
* initialization, now running from RAM.
*/
move.l %a0, %a1
- add.l #(in_ram - CFG_MONITOR_BASE), %a1
+ add.l #(in_ram - CONFIG_SYS_MONITOR_BASE), %a1
jmp (%a1)
in_ram:
@@ -220,9 +220,9 @@
* Now clear BSS segment
*/
move.l %a0, %a1
- add.l #(_sbss - CFG_MONITOR_BASE),%a1
+ add.l #(_sbss - CONFIG_SYS_MONITOR_BASE),%a1
move.l %a0, %d1
- add.l #(_ebss - CFG_MONITOR_BASE),%d1
+ add.l #(_ebss - CONFIG_SYS_MONITOR_BASE),%d1
6:
clr.l (%a1)+
cmp.l %a1,%d1
@@ -232,11 +232,11 @@
* fix got table in RAM
*/
move.l %a0, %a1
- add.l #(__got_start - CFG_MONITOR_BASE),%a1
+ add.l #(__got_start - CONFIG_SYS_MONITOR_BASE),%a1
move.l %a1,%a5 /* * fix got pointer register a5 */
move.l %a0, %a2
- add.l #(__got_end - CFG_MONITOR_BASE),%a2
+ add.l #(__got_end - CONFIG_SYS_MONITOR_BASE),%a2
7:
move.l (%a1),%d1
@@ -248,7 +248,7 @@
/* calculate relative jump to board_init_r in ram */
move.l %a0, %a1
- add.l #(board_init_r - CFG_MONITOR_BASE), %a1
+ add.l #(board_init_r - CONFIG_SYS_MONITOR_BASE), %a1
/* set parameters for board_init_r */
move.l %a0,-(%sp) /* dest_addr */
@@ -281,7 +281,7 @@
/* cache functions */
.globl icache_enable
icache_enable:
- move.l #(CFG_SDRAM_BASE + 0x1c000), %d0
+ move.l #(CONFIG_SYS_SDRAM_BASE + 0x1c000), %d0
movec %d0, %ACR2 /* Enable cache */
move.l #0x020C8100, %d0 /* Setup cache mask */
@@ -322,7 +322,7 @@
dcache_enable:
bsr icache_disable
- move.l #(CFG_SDRAM_BASE + 0xc000), %d0
+ move.l #(CONFIG_SYS_SDRAM_BASE + 0xc000), %d0
movec %d0, %ACR0 /* Enable cache */
move.l #0xA30C8100, %d0 /* Invalidate cache cmd */